Action not permitted
Modal body text goes here.
Modal Title
Modal Body
CERTFR-2026-AVI-0955
Vulnerability from certfr_avis
De multiples vulnérabilités ont été découvertes dans le noyau Linux de Red Hat. Certaines d'entre elles permettent à un attaquant de provoquer une exécution de code arbitraire à distance, une élévation de privilèges et un déni de service à distance.
Solutions
Se référer au bulletin de sécurité de l'éditeur pour l'obtention des correctifs (cf. section Documentation).
Impacted products
| Vendor | Product | Description | ||
|---|---|---|---|---|
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for ARM 64 - Extended Life Cycle 9.8 aarch64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for Power, little endian 8 ppc64le | ||
| Red Hat | Red Hat Enterprise Linux Server | Red Hat Enterprise Linux Server - AUS 8.4 x86_64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for IBM z Systems 8 s390x | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for ARM 64 - 4 years of updates 9.8 aarch64 | ||
| Red Hat | Red Hat OpenShift Container Platform | Red Hat OpenShift Container Platform for IBM Z and LinuxONE 4.22 for RHEL 8 s390x | ||
| Red Hat | Red Hat CodeReady Linux Builder | Red Hat CodeReady Linux Builder for ARM 64 - Extended Update Support 9.8 aarch64 | ||
| Red Hat | Red Hat CodeReady Linux Builder | Red Hat CodeReady Linux Builder for Power, little endian - Extended Update Support 10.2 ppc64le | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for x86_64 - Extended Update Support 10.2 x86_64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for x86_64 8 x86_64 | ||
| Red Hat | Red Hat OpenShift Container Platform | Red Hat OpenShift Container Platform 4.22 for RHEL 9 x86_64 | ||
| Red Hat | Red Hat CodeReady Linux Builder | Red Hat CodeReady Linux Builder for IBM z Systems 9 s390x | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for IBM z Systems - 4 years of updates 9.8 s390x | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for x86_64 10 x86_64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for Power, little endian - Extended Life Cycle 9.4 ppc64le | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for Real Time 8 x86_64 | ||
| Red Hat | Red Hat OpenShift Container Platform | Red Hat OpenShift Container Platform for ARM 64 4.22 for RHEL 9 aarch64 | ||
| Red Hat | Red Hat OpenShift Container Platform | Red Hat OpenShift Container Platform for Power 4.22 for RHEL 8 ppc64le | ||
| Red Hat | Red Hat Enterprise Linux Server | Red Hat Enterprise Linux Server for Power LE - Update Services for SAP Solutions 9.4 ppc64le | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for x86_64 - Update Services for SAP Solutions 9.2 x86_64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for ARM 64 9 aarch64 | ||
| Red Hat | Red Hat OpenShift Container Platform | Red Hat OpenShift Container Platform for ARM 64 4.22 for RHEL 8 aarch64 | ||
| Red Hat | Red Hat OpenShift Container Platform | Red Hat OpenShift Container Platform 4.22 for RHEL 8 x86_64 | ||
| Red Hat | Red Hat CodeReady Linux Builder | Red Hat CodeReady Linux Builder for x86_64 10 x86_64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for x86_64 - Update Services for SAP Solutions 9.4 x86_64 | ||
| Red Hat | Red Hat OpenShift Container Platform | Red Hat OpenShift Container Platform for IBM Z and LinuxONE 4.22 for RHEL 9 s390x | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for ARM 64 - Extended Update Support 10.2 aarch64 | ||
| Red Hat | Red Hat CodeReady Linux Builder | Red Hat CodeReady Linux Builder for x86_64 - Extended Update Support 9.8 x86_64 | ||
| Red Hat | Red Hat CodeReady Linux Builder | Red Hat CodeReady Linux Builder for Power, little endian 9 ppc64le | ||
| Red Hat | Red Hat CodeReady Linux Builder | Red Hat CodeReady Linux Builder for IBM z Systems 10 s390x | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for Power, little endian - 4 years of support 10.2 ppc64le | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for x86_64 - Extended Life Cycle 10.2 x86_64 | ||
| Red Hat | Red Hat CodeReady Linux Builder | Red Hat CodeReady Linux Builder for ARM 64 9 aarch64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for x86_64 - Extended Life Cycle 8.10 x86_64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for ARM 64 - Extended Life Cycle 9.4 aarch64 | ||
| Red Hat | Red Hat Enterprise Linux Server | Red Hat Enterprise Linux Server for Power LE - Update Services for SAP Solutions 9.8 ppc64le | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for IBM z Systems - 4 years of updates 9.4 s390x | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for x86_64 - Extended Life Cycle 9.2 x86_64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for IBM z Systems - Extended Life Cycle 8.10 s390x | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for ARM 64 - 4 years of updates 9.4 aarch64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for Real Time for x86_64 - Extended Life Cycle Support 7 x86_64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for ARM 64 8 aarch64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for ARM 64 10 aarch64 | ||
| Red Hat | Red Hat CodeReady Linux Builder | Red Hat CodeReady Linux Builder for ARM 64 8 aarch64 | ||
| Red Hat | Red Hat CodeReady Linux Builder | Red Hat CodeReady Linux Builder for IBM z Systems - Extended Update Support 10.2 s390x | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for ARM 64 - 4 years of updates 10.2 aarch64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for x86_64 - Extended Life Cycle 9.4 x86_64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for Real Time for NFV 8 x86_64 | ||
| Red Hat | Red Hat Enterprise Linux Server | Red Hat Enterprise Linux Server - AUS 9.4 x86_64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for x86_64 - Update Services for SAP Solutions 9.8 x86_64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for x86_64 - Extended Life Cycle 9.8 x86_64 | ||
| Red Hat | Red Hat CodeReady Linux Builder | Red Hat CodeReady Linux Builder for ARM 64 - Extended Update Support 10.2 aarch64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for Power, little endian - Extended Life Cycle 10.2 ppc64le | ||
| Red Hat | Red Hat CodeReady Linux Builder | Red Hat CodeReady Linux Builder for x86_64 8 x86_64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for ARM 64 - Extended Life Cycle 8.10 aarch64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for IBM z Systems 9 s390x | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for x86_64 - 4 years of updates 10.2 x86_64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for IBM z Systems - Extended Life Cycle 9.8 s390x | ||
| Red Hat | Red Hat CodeReady Linux Builder | Red Hat CodeReady Linux Builder for IBM z Systems - Extended Update Support 9.8 s390x | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for IBM z Systems - Extended Update Support 9.8 s390x | ||
| Red Hat | Red Hat CodeReady Linux Builder | Red Hat CodeReady Linux Builder for ARM 64 10 aarch64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for IBM z Systems - Extended Life Cycle 9.4 s390x | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for IBM z Systems - 4 years of updates 10.2 s390x | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for Power, little endian - Extended Life Cycle 9.8 ppc64le | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for Power, little endian - Extended Update Support 10.2 ppc64le | ||
| Red Hat | Red Hat OpenShift Container Platform | Red Hat OpenShift Container Platform for Power 4.22 for RHEL 9 ppc64le | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for Power, little endian - Extended Update Support 9.8 ppc64le | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for IBM z Systems - Extended Life Cycle 10.2 s390x | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for Power, little endian - Extended Life Cycle 8.10 ppc64le | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for Power, little endian 9 ppc64le | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for ARM 64 - Extended Update Support 9.8 aarch64 | ||
| Red Hat | Red Hat CodeReady Linux Builder | Red Hat CodeReady Linux Builder for Power, little endian 8 ppc64le | ||
| Red Hat | Red Hat CodeReady Linux Builder | Red Hat CodeReady Linux Builder for x86_64 - Extended Update Support 10.2 x86_64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for IBM z Systems - Extended Update Support 10.2 s390x | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for IBM z Systems 10 s390x | ||
| Red Hat | Red Hat CodeReady Linux Builder | Red Hat CodeReady Linux Builder for x86_64 9 x86_64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for x86_64 - Extended Update Support 9.8 x86_64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for x86_64 9 x86_64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for Power, little endian 10 ppc64le | ||
| Red Hat | Red Hat CodeReady Linux Builder | Red Hat CodeReady Linux Builder for Power, little endian 10 ppc64le | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for x86_64 - Extended Life Cycle Long Life 8.4 x86_64 | ||
| Red Hat | Red Hat Enterprise Linux | Red Hat Enterprise Linux for ARM 64 - Extended Life Cycle 10.2 aarch64 |
References
| Title | Publication Time | Tags | |||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|||||||||||||||||||||||||||||||||||||||||
{
"$ref": "https://www.cert.ssi.gouv.fr/openapi.json",
"affected_systems": [
{
"description": "Red Hat Enterprise Linux for ARM 64 - Extended Life Cycle 9.8 aarch64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for Power, little endian 8 ppc64le",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux Server - AUS 8.4 x86_64",
"product": {
"name": "Red Hat Enterprise Linux Server",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for IBM z Systems 8 s390x",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for ARM 64 - 4 years of updates 9.8 aarch64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat OpenShift Container Platform for IBM Z and LinuxONE 4.22 for RHEL 8 s390x",
"product": {
"name": "Red Hat OpenShift Container Platform",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat CodeReady Linux Builder for ARM 64 - Extended Update Support 9.8 aarch64",
"product": {
"name": "Red Hat CodeReady Linux Builder",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat CodeReady Linux Builder for Power, little endian - Extended Update Support 10.2 ppc64le",
"product": {
"name": "Red Hat CodeReady Linux Builder",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for x86_64 - Extended Update Support 10.2 x86_64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for x86_64 8 x86_64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat OpenShift Container Platform 4.22 for RHEL 9 x86_64",
"product": {
"name": "Red Hat OpenShift Container Platform",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat CodeReady Linux Builder for IBM z Systems 9 s390x",
"product": {
"name": "Red Hat CodeReady Linux Builder",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for IBM z Systems - 4 years of updates 9.8 s390x",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for x86_64 10 x86_64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for Power, little endian - Extended Life Cycle 9.4 ppc64le",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for Real Time 8 x86_64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat OpenShift Container Platform for ARM 64 4.22 for RHEL 9 aarch64",
"product": {
"name": "Red Hat OpenShift Container Platform",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat OpenShift Container Platform for Power 4.22 for RHEL 8 ppc64le",
"product": {
"name": "Red Hat OpenShift Container Platform",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux Server for Power LE - Update Services for SAP Solutions 9.4 ppc64le",
"product": {
"name": "Red Hat Enterprise Linux Server",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for x86_64 - Update Services for SAP Solutions 9.2 x86_64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for ARM 64 9 aarch64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat OpenShift Container Platform for ARM 64 4.22 for RHEL 8 aarch64",
"product": {
"name": "Red Hat OpenShift Container Platform",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat OpenShift Container Platform 4.22 for RHEL 8 x86_64",
"product": {
"name": "Red Hat OpenShift Container Platform",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat CodeReady Linux Builder for x86_64 10 x86_64",
"product": {
"name": "Red Hat CodeReady Linux Builder",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for x86_64 - Update Services for SAP Solutions 9.4 x86_64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat OpenShift Container Platform for IBM Z and LinuxONE 4.22 for RHEL 9 s390x",
"product": {
"name": "Red Hat OpenShift Container Platform",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for ARM 64 - Extended Update Support 10.2 aarch64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat CodeReady Linux Builder for x86_64 - Extended Update Support 9.8 x86_64",
"product": {
"name": "Red Hat CodeReady Linux Builder",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat CodeReady Linux Builder for Power, little endian 9 ppc64le",
"product": {
"name": "Red Hat CodeReady Linux Builder",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat CodeReady Linux Builder for IBM z Systems 10 s390x",
"product": {
"name": "Red Hat CodeReady Linux Builder",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for Power, little endian - 4 years of support 10.2 ppc64le",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for x86_64 - Extended Life Cycle 10.2 x86_64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat CodeReady Linux Builder for ARM 64 9 aarch64",
"product": {
"name": "Red Hat CodeReady Linux Builder",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for x86_64 - Extended Life Cycle 8.10 x86_64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for ARM 64 - Extended Life Cycle 9.4 aarch64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux Server for Power LE - Update Services for SAP Solutions 9.8 ppc64le",
"product": {
"name": "Red Hat Enterprise Linux Server",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for IBM z Systems - 4 years of updates 9.4 s390x",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for x86_64 - Extended Life Cycle 9.2 x86_64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for IBM z Systems - Extended Life Cycle 8.10 s390x",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for ARM 64 - 4 years of updates 9.4 aarch64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for Real Time for x86_64 - Extended Life Cycle Support 7 x86_64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for ARM 64 8 aarch64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for ARM 64 10 aarch64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat CodeReady Linux Builder for ARM 64 8 aarch64",
"product": {
"name": "Red Hat CodeReady Linux Builder",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat CodeReady Linux Builder for IBM z Systems - Extended Update Support 10.2 s390x",
"product": {
"name": "Red Hat CodeReady Linux Builder",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for ARM 64 - 4 years of updates 10.2 aarch64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for x86_64 - Extended Life Cycle 9.4 x86_64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for Real Time for NFV 8 x86_64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux Server - AUS 9.4 x86_64",
"product": {
"name": "Red Hat Enterprise Linux Server",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for x86_64 - Update Services for SAP Solutions 9.8 x86_64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for x86_64 - Extended Life Cycle 9.8 x86_64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat CodeReady Linux Builder for ARM 64 - Extended Update Support 10.2 aarch64",
"product": {
"name": "Red Hat CodeReady Linux Builder",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for Power, little endian - Extended Life Cycle 10.2 ppc64le",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat CodeReady Linux Builder for x86_64 8 x86_64",
"product": {
"name": "Red Hat CodeReady Linux Builder",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for ARM 64 - Extended Life Cycle 8.10 aarch64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for IBM z Systems 9 s390x",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for x86_64 - 4 years of updates 10.2 x86_64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for IBM z Systems - Extended Life Cycle 9.8 s390x",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat CodeReady Linux Builder for IBM z Systems - Extended Update Support 9.8 s390x",
"product": {
"name": "Red Hat CodeReady Linux Builder",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for IBM z Systems - Extended Update Support 9.8 s390x",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat CodeReady Linux Builder for ARM 64 10 aarch64",
"product": {
"name": "Red Hat CodeReady Linux Builder",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for IBM z Systems - Extended Life Cycle 9.4 s390x",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for IBM z Systems - 4 years of updates 10.2 s390x",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for Power, little endian - Extended Life Cycle 9.8 ppc64le",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for Power, little endian - Extended Update Support 10.2 ppc64le",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat OpenShift Container Platform for Power 4.22 for RHEL 9 ppc64le",
"product": {
"name": "Red Hat OpenShift Container Platform",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for Power, little endian - Extended Update Support 9.8 ppc64le",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for IBM z Systems - Extended Life Cycle 10.2 s390x",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for Power, little endian - Extended Life Cycle 8.10 ppc64le",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for Power, little endian 9 ppc64le",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for ARM 64 - Extended Update Support 9.8 aarch64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat CodeReady Linux Builder for Power, little endian 8 ppc64le",
"product": {
"name": "Red Hat CodeReady Linux Builder",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat CodeReady Linux Builder for x86_64 - Extended Update Support 10.2 x86_64",
"product": {
"name": "Red Hat CodeReady Linux Builder",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for IBM z Systems - Extended Update Support 10.2 s390x",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for IBM z Systems 10 s390x",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat CodeReady Linux Builder for x86_64 9 x86_64",
"product": {
"name": "Red Hat CodeReady Linux Builder",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for x86_64 - Extended Update Support 9.8 x86_64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for x86_64 9 x86_64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for Power, little endian 10 ppc64le",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat CodeReady Linux Builder for Power, little endian 10 ppc64le",
"product": {
"name": "Red Hat CodeReady Linux Builder",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for x86_64 - Extended Life Cycle Long Life 8.4 x86_64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
},
{
"description": "Red Hat Enterprise Linux for ARM 64 - Extended Life Cycle 10.2 aarch64",
"product": {
"name": "Red Hat Enterprise Linux",
"vendor": {
"name": "Red Hat",
"scada": false
}
}
}
],
"affected_systems_content": "",
"content": "## Solutions\n\nSe r\u00e9f\u00e9rer au bulletin de s\u00e9curit\u00e9 de l\u0027\u00e9diteur pour l\u0027obtention des correctifs (cf. section Documentation).",
"cves": [
{
"name": "CVE-2025-40026",
"url": "https://www.cve.org/CVERecord?id=CVE-2025-40026"
},
{
"name": "CVE-2026-31787",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-31787"
},
{
"name": "CVE-2026-31613",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-31613"
},
{
"name": "CVE-2026-52993",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-52993"
},
{
"name": "CVE-2026-12505",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-12505"
},
{
"name": "CVE-2026-43279",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-43279"
},
{
"name": "CVE-2026-46209",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-46209"
},
{
"name": "CVE-2026-57231",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-57231"
},
{
"name": "CVE-2026-53006",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-53006"
},
{
"name": "CVE-2026-46116",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-46116"
},
{
"name": "CVE-2026-43500",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-43500"
},
{
"name": "CVE-2026-46189",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-46189"
},
{
"name": "CVE-2025-68724",
"url": "https://www.cve.org/CVERecord?id=CVE-2025-68724"
},
{
"name": "CVE-2026-31684",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-31684"
},
{
"name": "CVE-2025-68183",
"url": "https://www.cve.org/CVERecord?id=CVE-2025-68183"
},
{
"name": "CVE-2025-10263",
"url": "https://www.cve.org/CVERecord?id=CVE-2025-10263"
},
{
"name": "CVE-2026-52950",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-52950"
},
{
"name": "CVE-2026-53059",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-53059"
},
{
"name": "CVE-2025-38085",
"url": "https://www.cve.org/CVERecord?id=CVE-2025-38085"
},
{
"name": "CVE-2026-46135",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-46135"
},
{
"name": "CVE-2026-52976",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-52976"
},
{
"name": "CVE-2026-31488",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-31488"
},
{
"name": "CVE-2026-46086",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-46086"
},
{
"name": "CVE-2026-43037",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-43037"
},
{
"name": "CVE-2026-43027",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-43027"
},
{
"name": "CVE-2026-64530",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-64530"
},
{
"name": "CVE-2026-53281",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-53281"
},
{
"name": "CVE-2026-52923",
"url": "https://www.cve.org/CVERecord?id=CVE-2026-52923"
}
],
"initial_release_date": "2026-07-31T00:00:00",
"last_revision_date": "2026-07-31T00:00:00",
"links": [],
"reference": "CERTFR-2026-AVI-0955",
"revisions": [
{
"description": "Version initiale",
"revision_date": "2026-07-31T00:00:00.000000"
}
],
"risks": [
{
"description": "D\u00e9ni de service \u00e0 distance"
},
{
"description": "Ex\u00e9cution de code arbitraire \u00e0 distance"
},
{
"description": "Atteinte \u00e0 l\u0027int\u00e9grit\u00e9 des donn\u00e9es"
},
{
"description": "Contournement de la politique de s\u00e9curit\u00e9"
},
{
"description": "Atteinte \u00e0 la confidentialit\u00e9 des donn\u00e9es"
},
{
"description": "\u00c9l\u00e9vation de privil\u00e8ges"
}
],
"summary": "De multiples vuln\u00e9rabilit\u00e9s ont \u00e9t\u00e9 d\u00e9couvertes dans le noyau Linux de Red Hat. Certaines d\u0027entre elles permettent \u00e0 un attaquant de provoquer une ex\u00e9cution de code arbitraire \u00e0 distance, une \u00e9l\u00e9vation de privil\u00e8ges et un d\u00e9ni de service \u00e0 distance.",
"title": "Multiples vuln\u00e9rabilit\u00e9s dans le noyau Linux de Red Hat",
"vendor_advisories": [
{
"published_at": "2026-07-24",
"title": "Bulletin de s\u00e9curit\u00e9 Red Hat RHSA-2026:45115",
"url": "https://access.redhat.com/errata/RHSA-2026:45115"
},
{
"published_at": "2026-07-28",
"title": "Bulletin de s\u00e9curit\u00e9 Red Hat RHSA-2026:47010",
"url": "https://access.redhat.com/errata/RHSA-2026:47010"
},
{
"published_at": "2026-07-28",
"title": "Bulletin de s\u00e9curit\u00e9 Red Hat RHSA-2026:47017",
"url": "https://access.redhat.com/errata/RHSA-2026:47017"
},
{
"published_at": "2026-07-24",
"title": "Bulletin de s\u00e9curit\u00e9 Red Hat RHSA-2026:45116",
"url": "https://access.redhat.com/errata/RHSA-2026:45116"
},
{
"published_at": "2026-07-28",
"title": "Bulletin de s\u00e9curit\u00e9 Red Hat RHSA-2026:47248",
"url": "https://access.redhat.com/errata/RHSA-2026:47248"
},
{
"published_at": "2026-07-28",
"title": "Bulletin de s\u00e9curit\u00e9 Red Hat RHSA-2026:47011",
"url": "https://access.redhat.com/errata/RHSA-2026:47011"
},
{
"published_at": "2026-07-29",
"title": "Bulletin de s\u00e9curit\u00e9 Red Hat RHSA-2026:47632",
"url": "https://access.redhat.com/errata/RHSA-2026:47632"
},
{
"published_at": "2026-07-29",
"title": "Bulletin de s\u00e9curit\u00e9 Red Hat RHSA-2026:47633",
"url": "https://access.redhat.com/errata/RHSA-2026:47633"
},
{
"published_at": "2026-07-29",
"title": "Bulletin de s\u00e9curit\u00e9 Red Hat RHSA-2026:48222",
"url": "https://access.redhat.com/errata/RHSA-2026:48222"
},
{
"published_at": "2026-07-27",
"title": "Bulletin de s\u00e9curit\u00e9 Red Hat RHSA-2026:46461",
"url": "https://access.redhat.com/errata/RHSA-2026:46461"
},
{
"published_at": "2026-07-30",
"title": "Bulletin de s\u00e9curit\u00e9 Red Hat RHSA-2026:48386",
"url": "https://access.redhat.com/errata/RHSA-2026:48386"
},
{
"published_at": "2026-07-28",
"title": "Bulletin de s\u00e9curit\u00e9 Red Hat RHSA-2026:44232",
"url": "https://access.redhat.com/errata/RHSA-2026:44232"
},
{
"published_at": "2026-07-24",
"title": "Bulletin de s\u00e9curit\u00e9 Red Hat RHSA-2026:45192",
"url": "https://access.redhat.com/errata/RHSA-2026:45192"
}
]
}
CVE-2025-40026 (GCVE-0-2025-40026)
Vulnerability from cvelistv5
Published
2025-10-28 09:32
Modified
2026-08-05 12:07
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Don't (re)check L1 intercepts when completing userspace I/O
When completing emulation of instruction that generated a userspace exit
for I/O, don't recheck L1 intercepts as KVM has already finished that
phase of instruction execution, i.e. has already committed to allowing L2
to perform I/O. If L1 (or host userspace) modifies the I/O permission
bitmaps during the exit to userspace, KVM will treat the access as being
intercepted despite already having emulated the I/O access.
Pivot on EMULTYPE_NO_DECODE to detect that KVM is completing emulation.
Of the three users of EMULTYPE_NO_DECODE, only complete_emulated_io() (the
intended "recipient") can reach the code in question. gp_interception()'s
use is mutually exclusive with is_guest_mode(), and
complete_emulated_insn_gp() unconditionally pairs EMULTYPE_NO_DECODE with
EMULTYPE_SKIP.
The bad behavior was detected by a syzkaller program that toggles port I/O
interception during the userspace I/O exit, ultimately resulting in a WARN
on vcpu->arch.pio.count being non-zero due to KVM no completing emulation
of the I/O instruction.
WARNING: CPU: 23 PID: 1083 at arch/x86/kvm/x86.c:8039 emulator_pio_in_out+0x154/0x170 [kvm]
Modules linked in: kvm_intel kvm irqbypass
CPU: 23 UID: 1000 PID: 1083 Comm: repro Not tainted 6.16.0-rc5-c1610d2d66b1-next-vm #74 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:emulator_pio_in_out+0x154/0x170 [kvm]
PKRU: 55555554
Call Trace:
<TASK>
kvm_fast_pio+0xd6/0x1d0 [kvm]
vmx_handle_exit+0x149/0x610 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xda8/0x1ac0 [kvm]
kvm_vcpu_ioctl+0x244/0x8c0 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0x5d/0xc60
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
References
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Linux | Linux |
Version: 8a76d7f25f8f24fc5a328c8e15e4a7313cf141b9 Version: 8a76d7f25f8f24fc5a328c8e15e4a7313cf141b9 Version: 8a76d7f25f8f24fc5a328c8e15e4a7313cf141b9 Version: 8a76d7f25f8f24fc5a328c8e15e4a7313cf141b9 Version: 8a76d7f25f8f24fc5a328c8e15e4a7313cf141b9 Version: 8a76d7f25f8f24fc5a328c8e15e4a7313cf141b9 Version: 8a76d7f25f8f24fc5a328c8e15e4a7313cf141b9 Version: 8a76d7f25f8f24fc5a328c8e15e4a7313cf141b9 Version: 8a76d7f25f8f24fc5a328c8e15e4a7313cf141b9 |
||
{
"containers": {
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"arch/x86/kvm/emulate.c",
"arch/x86/kvm/kvm_emulate.h",
"arch/x86/kvm/x86.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "a908eca437789589dd4624da428614c1275064dc",
"status": "affected",
"version": "8a76d7f25f8f24fc5a328c8e15e4a7313cf141b9",
"versionType": "git"
},
{
"lessThan": "00338255bb1f422642fb2798ebe92e93b6e4209b",
"status": "affected",
"version": "8a76d7f25f8f24fc5a328c8e15e4a7313cf141b9",
"versionType": "git"
},
{
"lessThan": "e0ce3ed1048a47986d15aef1a98ebda25560d257",
"status": "affected",
"version": "8a76d7f25f8f24fc5a328c8e15e4a7313cf141b9",
"versionType": "git"
},
{
"lessThan": "ba35a5d775799ce5ad60230be97336f2fefd518e",
"status": "affected",
"version": "8a76d7f25f8f24fc5a328c8e15e4a7313cf141b9",
"versionType": "git"
},
{
"lessThan": "3d3abf3f7e8b1abb082070a343de82d7efc80523",
"status": "affected",
"version": "8a76d7f25f8f24fc5a328c8e15e4a7313cf141b9",
"versionType": "git"
},
{
"lessThan": "e7177c7e32cb806f348387b7f4faafd4a5b32054",
"status": "affected",
"version": "8a76d7f25f8f24fc5a328c8e15e4a7313cf141b9",
"versionType": "git"
},
{
"lessThan": "3a062a5c55adc5507600b9ae6d911e247e2f1d6e",
"status": "affected",
"version": "8a76d7f25f8f24fc5a328c8e15e4a7313cf141b9",
"versionType": "git"
},
{
"lessThan": "7366830642505683bbe905a2ba5d18d6e4b512b8",
"status": "affected",
"version": "8a76d7f25f8f24fc5a328c8e15e4a7313cf141b9",
"versionType": "git"
},
{
"lessThan": "e750f85391286a4c8100275516973324b621a269",
"status": "affected",
"version": "8a76d7f25f8f24fc5a328c8e15e4a7313cf141b9",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"arch/x86/kvm/emulate.c",
"arch/x86/kvm/kvm_emulate.h",
"arch/x86/kvm/x86.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "3.0"
},
{
"lessThan": "3.0",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.4.*",
"status": "unaffected",
"version": "5.4.301",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.246",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.195",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.157",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.111",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.52",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.16.*",
"status": "unaffected",
"version": "6.16.12",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.17.*",
"status": "unaffected",
"version": "6.17.2",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "6.18",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.4.301",
"versionStartIncluding": "3.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.246",
"versionStartIncluding": "3.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.195",
"versionStartIncluding": "3.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.157",
"versionStartIncluding": "3.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.111",
"versionStartIncluding": "3.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.52",
"versionStartIncluding": "3.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.16.12",
"versionStartIncluding": "3.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.17.2",
"versionStartIncluding": "3.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18",
"versionStartIncluding": "3.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nKVM: x86: Don\u0027t (re)check L1 intercepts when completing userspace I/O\n\nWhen completing emulation of instruction that generated a userspace exit\nfor I/O, don\u0027t recheck L1 intercepts as KVM has already finished that\nphase of instruction execution, i.e. has already committed to allowing L2\nto perform I/O. If L1 (or host userspace) modifies the I/O permission\nbitmaps during the exit to userspace, KVM will treat the access as being\nintercepted despite already having emulated the I/O access.\n\nPivot on EMULTYPE_NO_DECODE to detect that KVM is completing emulation.\nOf the three users of EMULTYPE_NO_DECODE, only complete_emulated_io() (the\nintended \"recipient\") can reach the code in question. gp_interception()\u0027s\nuse is mutually exclusive with is_guest_mode(), and\ncomplete_emulated_insn_gp() unconditionally pairs EMULTYPE_NO_DECODE with\nEMULTYPE_SKIP.\n\nThe bad behavior was detected by a syzkaller program that toggles port I/O\ninterception during the userspace I/O exit, ultimately resulting in a WARN\non vcpu-\u003earch.pio.count being non-zero due to KVM no completing emulation\nof the I/O instruction.\n\n WARNING: CPU: 23 PID: 1083 at arch/x86/kvm/x86.c:8039 emulator_pio_in_out+0x154/0x170 [kvm]\n Modules linked in: kvm_intel kvm irqbypass\n CPU: 23 UID: 1000 PID: 1083 Comm: repro Not tainted 6.16.0-rc5-c1610d2d66b1-next-vm #74 NONE\n Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015\n RIP: 0010:emulator_pio_in_out+0x154/0x170 [kvm]\n PKRU: 55555554\n Call Trace:\n \u003cTASK\u003e\n kvm_fast_pio+0xd6/0x1d0 [kvm]\n vmx_handle_exit+0x149/0x610 [kvm_intel]\n kvm_arch_vcpu_ioctl_run+0xda8/0x1ac0 [kvm]\n kvm_vcpu_ioctl+0x244/0x8c0 [kvm]\n __x64_sys_ioctl+0x8a/0xd0\n do_syscall_64+0x5d/0xc60\n entry_SYSCALL_64_after_hwframe+0x4b/0x53\n \u003c/TASK\u003e"
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 7.9,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:L/I:L/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:L - Exploitation requires either `KVM_RUN`/`ioctl()` access to `/dev/kvm` on the host or code execution inside a guest running a nested hypervisor; there is no network-reachable path to `x86_emulate_insn()`.\nAC:L - The syzkaller reproducer deterministically toggles the port-I/O bitmap while servicing the `KVM_EXIT_IO` exit, and the guest-side variant only needs a second L1 vCPU to write the bitmap page \u2014 the attacker controls both sides of the window, and nested virt is enabled by default on kvm_intel/kvm_amd.\nPR:L - The attacker needs only unprivileged access to `/dev/kvm` (commonly granted via the `kvm` group or a VMM process), or ordinary code execution inside a guest; no root or CAP_SYS_ADMIN in the init namespace is required.\nUI:N - The vCPU thread reaches the buggy re-check on the normal `KVM_RUN` re-entry path after a userspace I/O exit; no victim action is needed.\nS:C - A guest (L1/L2) triggers corrupted state and a WARN/panic in the host kernel\u0027s KVM module, crossing the guest-to-host security boundary, and the aborted emulation also crosses the L1/L2 authority boundary by delivering an I/O intercept L1 never legitimately received.\nC:L - The stale `pio.count`/`pio.size` makes the next emulated `in` take the completion path and hand back data captured during the earlier I/O read on L2\u0027s behalf, leaking bounded `pio_data` contents across the L1/L2 boundary; the copy is capped at the 1024-byte `read_cache`, so it is not an arbitrary read.\nI:L - KVM injects a nested IOIO VM-exit to L1 for an access it already performed against the host device model (double execution) and subsequently substitutes stale `pio_data` for a real port read, corrupting guest I/O state in a limited, non-arbitrary way.\nA:H - The un-cleared `vcpu-\u003earch.pio.count` trips `WARN_ON_ONCE()` in `emulator_pio_in_out()` in the host kernel \u2014 a full host panic on the widely deployed `panic_on_warn=1` configuration \u2014 and leaves the vCPU with permanently desynchronized emulation state."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-05T12:07:08.793Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/a908eca437789589dd4624da428614c1275064dc"
},
{
"url": "https://git.kernel.org/stable/c/00338255bb1f422642fb2798ebe92e93b6e4209b"
},
{
"url": "https://git.kernel.org/stable/c/e0ce3ed1048a47986d15aef1a98ebda25560d257"
},
{
"url": "https://git.kernel.org/stable/c/ba35a5d775799ce5ad60230be97336f2fefd518e"
},
{
"url": "https://git.kernel.org/stable/c/3d3abf3f7e8b1abb082070a343de82d7efc80523"
},
{
"url": "https://git.kernel.org/stable/c/e7177c7e32cb806f348387b7f4faafd4a5b32054"
},
{
"url": "https://git.kernel.org/stable/c/3a062a5c55adc5507600b9ae6d911e247e2f1d6e"
},
{
"url": "https://git.kernel.org/stable/c/7366830642505683bbe905a2ba5d18d6e4b512b8"
},
{
"url": "https://git.kernel.org/stable/c/e750f85391286a4c8100275516973324b621a269"
}
],
"title": "KVM: x86: Don\u0027t (re)check L1 intercepts when completing userspace I/O",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2025-40026",
"datePublished": "2025-10-28T09:32:33.075Z",
"dateReserved": "2025-04-16T07:20:57.152Z",
"dateUpdated": "2026-08-05T12:07:08.793Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2025-10263 (GCVE-0-2025-10263)
Vulnerability from cvelistv5
Published
2026-06-09 09:23
Modified
2026-08-27 12:04
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-362 - Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition')
Summary
Arm C1-Ultra, C1-Premium, Neoverse V3 & V3AE, Neoverse V2, Neoverse V1, Neoverse-N2, Neoverse-N1, Cortex-X925, Cortex-X4, Cortex-X3, Cortex-X2, Cortex-X1 & X1C, Cortex-A710, Cortex-A78, A78AE & A78C, Cortex-A77, Cortex-A76 & A76A may allow writes to resources owned by a higher exception level.
References
Impacted products
| Vendor | Product | Version | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Arm | C1-Ultra |
Version: 0 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2026-06-09T16:53:49.813Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://xenbits.xen.org/xsa/advisory-493.html"
},
{
"url": "http://www.openwall.com/lists/oss-security/2026/06/09/13"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "NONE",
"baseScore": 9.1,
"baseSeverity": "CRITICAL",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2025-10263",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-06-09T14:11:21.775441Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-06-09T14:11:48.257Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
},
{
"affected": [
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:10.2"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 10",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:6.12.0-211.30.1.el10_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux_eus:10.0"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 10.0 Extended Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:6.12.0-55.98.1.el10_0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:8::nfv"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-553.140.1.rt7.481.el8_10",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:8"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-553.140.1.el8_10",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_aus:8.4"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.4 Advanced Mission Critical Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-305.200.1.el8_4",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_eus_long_life:8.4"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.4 Extended Update Support Long-Life Add-On",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-305.200.1.el8_4",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_aus:8.6"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.6 Advanced Mission Critical Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-372.204.1.el8_6",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_eus_long_life:8.6"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.6 Extended Update Support Long-Life Add-On",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-372.204.1.el8_6",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_tus:8.8"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.8 Telecommunications Update Service",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-477.158.1.el8_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_e4s:8.8"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.8 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-477.158.1.el8_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:9",
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-687.22.1.el9_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_e4s:9.2"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9.2 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-284.186.1.el9_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_e4s:9.2::nfv"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 9.2 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-284.186.1.rt14.471.el9_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_e4s:9.4"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9.4 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-427.143.1.el9_4",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_eus:9.6"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9.6 Extended Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-570.131.1.el9_6",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:openshift:4.12::el8"
],
"defaultStatus": "affected",
"packageName": "rhcos",
"product": "Red Hat OpenShift Container Platform 4.12",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "412.86.202608080425-0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:openshift:4.13::el9"
],
"defaultStatus": "affected",
"packageName": "rhcos",
"product": "Red Hat OpenShift Container Platform 4.13",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "413.92.202608111330-0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:openshift:4.18::el9"
],
"defaultStatus": "affected",
"packageName": "rhcos",
"product": "Red Hat OpenShift Container Platform 4.18",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "418.94.202608111829-0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:openshift:4.19::el9"
],
"defaultStatus": "affected",
"packageName": "rhcos",
"product": "Red Hat OpenShift Container Platform 4.19",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "4.19.9.6.202608120446-0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:openshift:4.20::el9"
],
"defaultStatus": "affected",
"packageName": "rhcos",
"product": "Red Hat OpenShift Container Platform 4.20",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "4.20.9.6.202608121719-0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:openshift:4.21::el9"
],
"defaultStatus": "affected",
"packageName": "rhcos",
"product": "Red Hat OpenShift Container Platform 4.21",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "4.21.9.6.202608122143-0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:openshift:4.22::el9"
],
"defaultStatus": "affected",
"packageName": "rhcos",
"product": "Red Hat OpenShift Container Platform 4.22",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "4.22.9.8.202607152026-0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:10"
],
"defaultStatus": "unaffected",
"packageName": "libkrun",
"product": "Red Hat Enterprise Linux 10",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:6"
],
"defaultStatus": "unaffected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 6",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "unaffected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "unaffected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux_nvidia:"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux for NVIDIA 26",
"vendor": "Red Hat"
}
],
"datePublic": "2026-06-09T09:23:18.802Z",
"descriptions": [
{
"lang": "en",
"value": "A flaw was found in the Linux kernel on ARM processors. A race condition in Translation Lookaside Buffer Invalidation (TLBI) operations during memory permission changes allows a local attacker to write to memory resources owned by higher privilege levels. This could allow an unprivileged local attacker to gain kernel privileges or a guest VM to escape to the hypervisor, resulting in complete system compromise."
}
],
"metrics": [
{
"other": {
"content": {
"namespace": "https://access.redhat.com/security/updates/classification/",
"value": "Important"
},
"type": "Red Hat severity rating"
}
},
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "NONE",
"baseScore": 8.4,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "CHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:N",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-266",
"description": "Incorrect Privilege Assignment",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-27T12:04:41.369Z",
"orgId": "0b0ca135-0b70-47e7-9f44-1890c2a1c46c",
"shortName": "redhat-SADP"
},
"references": [
{
"tags": [
"vdb-entry",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/security/cve/CVE-2025-10263"
},
{
"name": "RHBZ#2486958",
"tags": [
"issue-tracking",
"x_refsource_REDHAT"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=2486958"
},
{
"tags": [
"x_sadp-csaf-vex"
],
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2025/cve-2025-10263.json"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:54205"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:54187"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:54544"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:54553"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:54581"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:54599"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:40764"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:55445"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:34911"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:51603"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:51746"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:49031"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:36018"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:36349"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:47248"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:49033"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:52649"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:36348"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:51604"
}
],
"solutions": [
{
"lang": "en",
"value": "RHSA-2026:54205: Red Hat OpenShift Container Platform 4.12"
},
{
"lang": "en",
"value": "RHSA-2026:54187: Red Hat OpenShift Container Platform 4.13"
},
{
"lang": "en",
"value": "RHSA-2026:54544: Red Hat OpenShift Container Platform 4.18"
},
{
"lang": "en",
"value": "RHSA-2026:54553: Red Hat OpenShift Container Platform 4.19"
},
{
"lang": "en",
"value": "RHSA-2026:54581: Red Hat OpenShift Container Platform 4.20"
},
{
"lang": "en",
"value": "RHSA-2026:54599: Red Hat OpenShift Container Platform 4.21"
},
{
"lang": "en",
"value": "RHSA-2026:40764: Red Hat OpenShift Container Platform 4.22"
},
{
"lang": "en",
"value": "RHSA-2026:55445: Red Hat Enterprise Linux AppStream EUS (v. 10.0), Red Hat Enterprise Linux BaseOS EUS (v. 10.0), Red Hat Enterprise Linux CodeReady Linux Builder EUS (v. 10.0), Red Hat Enterprise Linux Real Time EUS (v. 10.0), Red Hat Enterprise Linux Real Time for NFV EUS (v. 10.0)"
},
{
"lang": "en",
"value": "RHSA-2026:34911: Red Hat Enterprise Linux AppStream (v. 10), Red Hat Enterprise Linux BaseOS (v. 10), Red Hat Enterprise Linux CodeReady Linux Builder (v. 10), Red Hat Enterprise Linux Real Time (v. 10), Red Hat Enterprise Linux Real Time for NFV (v. 10)"
},
{
"lang": "en",
"value": "RHSA-2026:51603: Red Hat Enterprise Linux AppStream E4S (v.9.2), Red Hat Enterprise Linux BaseOS E4S (v.9.2)"
},
{
"lang": "en",
"value": "RHSA-2026:51746: Red Hat Enterprise Linux AppStream E4S (v.9.4), Red Hat Enterprise Linux BaseOS E4S (v.9.4), Red Hat Enterprise Linux Real Time E4S (v.9.4), Red Hat Enterprise Linux Real Time for NFV E4S (v.9.4)"
},
{
"lang": "en",
"value": "RHSA-2026:49031: Red Hat CodeReady Linux Builder EUS (v.9.6), Red Hat Enterprise Linux AppStream EUS (v.9.6), Red Hat Enterprise Linux BaseOS EUS (v.9.6), Red Hat Enterprise Linux Real Time EUS (v.9.6), Red Hat Enterprise Linux Real Time for NFV EUS (v.9.6)"
},
{
"lang": "en",
"value": "RHSA-2026:36018: Red Hat Enterprise Linux AppStream (v. 9), Red Hat Enterprise Linux BaseOS (v. 9), Red Hat Enterprise Linux CodeReady Linux Builder (v. 9), Red Hat Enterprise Linux Real Time (v. 9), Red Hat Enterprise Linux Real Time for NFV (v. 9)"
},
{
"lang": "en",
"value": "RHSA-2026:36349: Red Hat Enterprise Linux BaseOS (v. 8), Red Hat Enterprise Linux CRB (v. 8)"
},
{
"lang": "en",
"value": "RHSA-2026:47248: Red Hat Enterprise Linux BaseOS AUS (v.8.4), Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.4)"
},
{
"lang": "en",
"value": "RHSA-2026:49033: Red Hat Enterprise Linux BaseOS AUS (v.8.6), Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.6)"
},
{
"lang": "en",
"value": "RHSA-2026:52649: Red Hat Enterprise Linux BaseOS E4S (v.8.8), Red Hat Enterprise Linux BaseOS TUS (v.8.8)"
},
{
"lang": "en",
"value": "RHSA-2026:36348: Red Hat Enterprise Linux NFV (v. 8), Red Hat Enterprise Linux RT (v. 8)"
},
{
"lang": "en",
"value": "RHSA-2026:51604: Red Hat Enterprise Linux Real Time E4S (v.9.2), Red Hat Enterprise Linux Real Time for NFV E4S (v.9.2)"
}
],
"timeline": [
{
"lang": "en",
"time": "2026-06-09T11:01:37.157Z",
"value": "Reported to Red Hat."
},
{
"lang": "en",
"time": "2026-06-09T09:23:18.802Z",
"value": "Made public."
}
],
"title": "kernel: Arm Processors: Privilege escalation or information disclosure via writes to higher exception level resources",
"x_adpType": "supplier",
"x_generator": {
"engine": "sadp-cli 1.0.0"
}
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "C1-Ultra",
"vendor": "Arm",
"versions": [
{
"status": "affected",
"version": "0"
}
]
},
{
"defaultStatus": "unaffected",
"product": "C1-Premium",
"vendor": "Arm",
"versions": [
{
"status": "affected",
"version": "0"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Neoverse V3",
"vendor": "Arm",
"versions": [
{
"status": "affected",
"version": "0"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Neoverse V3AE",
"vendor": "Arm",
"versions": [
{
"status": "affected",
"version": "0"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Neoverse V1",
"vendor": "Arm",
"versions": [
{
"status": "affected",
"version": "0"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Neoverse N2",
"vendor": "Arm",
"versions": [
{
"status": "affected",
"version": "0"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Neoverse N1",
"vendor": "Arm",
"versions": [
{
"status": "affected",
"version": "0"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Cortex-X925",
"vendor": "Arm",
"versions": [
{
"status": "affected",
"version": "0"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Cortex-X4",
"vendor": "Arm",
"versions": [
{
"status": "affected",
"version": "0"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Cortex-X3",
"vendor": "Arm",
"versions": [
{
"status": "affected",
"version": "0"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Cortex-X2",
"vendor": "Arm",
"versions": [
{
"status": "affected",
"version": "0"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Cortex-X1",
"vendor": "Arm",
"versions": [
{
"status": "affected",
"version": "0"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Cortex-X1C",
"vendor": "Arm",
"versions": [
{
"status": "affected",
"version": "0"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Cortex-A710",
"vendor": "Arm",
"versions": [
{
"status": "affected",
"version": "0"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Cortex-A78",
"vendor": "Arm",
"versions": [
{
"status": "affected",
"version": "0"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Cortex-A78AE",
"vendor": "Arm",
"versions": [
{
"status": "affected",
"version": "0"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Cortex-A78C",
"vendor": "Arm",
"versions": [
{
"status": "affected",
"version": "0"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Cortex-A77",
"vendor": "Arm",
"versions": [
{
"status": "affected",
"version": "0"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Cortex-A76",
"vendor": "Arm",
"versions": [
{
"status": "affected",
"version": "0"
}
]
},
{
"defaultStatus": "unaffected",
"product": "Cortex-A76AE",
"vendor": "Arm",
"versions": [
{
"status": "affected",
"version": "0"
}
]
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "Arm C1-Ultra, C1-Premium, Neoverse V3 \u0026amp; V3AE, Neoverse V2, Neoverse V1, Neoverse-N2, Neoverse-N1, Cortex-X925, Cortex-X4, Cortex-X3, Cortex-X2, Cortex-X1 \u0026amp; X1C, Cortex-A710, Cortex-A78, A78AE \u0026amp; A78C, Cortex-A77, Cortex-A76 \u0026amp; A76A may allow writes to resources owned by a higher exception level."
}
],
"value": "Arm C1-Ultra, C1-Premium, Neoverse V3 \u0026 V3AE, Neoverse V2, Neoverse V1, Neoverse-N2, Neoverse-N1, Cortex-X925, Cortex-X4, Cortex-X3, Cortex-X2, Cortex-X1 \u0026 X1C, Cortex-A710, Cortex-A78, A78AE \u0026 A78C, Cortex-A77, Cortex-A76 \u0026 A76A may allow writes to resources owned by a higher exception level."
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-362",
"description": "CWE-362 Concurrent Execution using Shared Resource with Improper Synchronization (\u0027Race Condition\u0027)",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-06-09T09:23:18.802Z",
"orgId": "56a131ea-b967-4a0d-a41e-5f3549952846",
"shortName": "Arm"
},
"references": [
{
"url": "https://developer.arm.com/documentation/112137"
}
],
"source": {
"discovery": "UNKNOWN"
},
"x_generator": {
"engine": "Vulnogram 1.0.2"
}
}
},
"cveMetadata": {
"assignerOrgId": "56a131ea-b967-4a0d-a41e-5f3549952846",
"assignerShortName": "Arm",
"cveId": "CVE-2025-10263",
"datePublished": "2026-06-09T09:23:18.802Z",
"dateReserved": "2025-09-11T08:50:36.018Z",
"dateUpdated": "2026-08-27T12:04:41.369Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-52950 (GCVE-0-2026-52950)
Vulnerability from cvelistv5
Published
2026-06-24 16:28
Modified
2026-08-05 12:31
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
drm/xe/dma-buf: fix UAF with retry loop
Retry doesn't work here, since bo will be freed on error, leading to
UAF. However, now that we do the alloc & init before the attach, we can
now combine this as one unit and have the init do the alloc for us. This
should make the retry safe.
Reported by Sashiko.
v2: Fix up the error unwind (CI)
(cherry picked from commit 479669418253e0f27f8cf5db01a731352ea592e7)
References
Impacted products
{
"containers": {
"adp": [
{
"affected": [
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:10.2"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 10",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:6.12.0-211.37.1.el10_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:9",
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-687.30.1.el9_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:6"
],
"defaultStatus": "unaffected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 6",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "unaffected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "unaffected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:8"
],
"defaultStatus": "unaffected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:8"
],
"defaultStatus": "unaffected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat"
}
],
"datePublic": "2026-06-24T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A flaw was found in the Linux kernel, specifically within the drm/xe/dma-buf component. This Use-After-Free (UAF) vulnerability occurs due to an issue in a retry loop, where a buffer object is prematurely freed on error. An attacker could potentially exploit this to cause memory corruption, leading to system instability or, in some cases, arbitrary code execution."
}
],
"metrics": [
{
"other": {
"content": {
"namespace": "https://access.redhat.com/security/updates/classification/",
"value": "Important"
},
"type": "Red Hat severity rating"
}
},
{
"cvssV3_1": {
"attackComplexity": "HIGH",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 7,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-825",
"description": "Expired Pointer Dereference",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-27T12:05:31.494Z",
"orgId": "0b0ca135-0b70-47e7-9f44-1890c2a1c46c",
"shortName": "redhat-SADP"
},
"references": [
{
"tags": [
"vdb-entry",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/security/cve/CVE-2026-52950"
},
{
"name": "RHBZ#2492318",
"tags": [
"issue-tracking",
"x_refsource_REDHAT"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=2492318"
},
{
"tags": [
"x_sadp-csaf-vex"
],
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-52950.json"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:42919"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:45192"
}
],
"solutions": [
{
"lang": "en",
"value": "RHSA-2026:42919: Red Hat Enterprise Linux AppStream (v. 10), Red Hat Enterprise Linux BaseOS (v. 10), Red Hat Enterprise Linux CodeReady Linux Builder (v. 10), Red Hat Enterprise Linux Real Time (v. 10), Red Hat Enterprise Linux Real Time for NFV (v. 10)"
},
{
"lang": "en",
"value": "RHSA-2026:45192: Red Hat Enterprise Linux AppStream (v. 9), Red Hat Enterprise Linux BaseOS (v. 9), Red Hat Enterprise Linux CodeReady Linux Builder (v. 9), Red Hat Enterprise Linux Real Time (v. 9), Red Hat Enterprise Linux Real Time for NFV (v. 9)"
}
],
"timeline": [
{
"lang": "en",
"time": "2026-06-24T00:00:00.000Z",
"value": "Reported to Red Hat."
},
{
"lang": "en",
"time": "2026-06-24T00:00:00.000Z",
"value": "Made public."
}
],
"title": "kernel: drm/xe/dma-buf: fix UAF with retry loop",
"x_adpType": "supplier",
"x_generator": {
"engine": "sadp-cli 1.0.0"
}
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/gpu/drm/xe/xe_dma_buf.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "39fdac6be02eb7c3460518c1c4085f75f935c4ce",
"status": "affected",
"version": "eb289a5f6cc668853f9b2ea6aca04afe58ed11c7",
"versionType": "git"
},
{
"lessThan": "827062952ed9bdf4220466c1f05ce452d04bdedf",
"status": "affected",
"version": "eb289a5f6cc668853f9b2ea6aca04afe58ed11c7",
"versionType": "git"
},
{
"lessThan": "155a372a1cc50fa93387c5d3cdfd614a61e1afd1",
"status": "affected",
"version": "eb289a5f6cc668853f9b2ea6aca04afe58ed11c7",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/gpu/drm/xe/xe_dma_buf.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "6.18"
},
{
"lessThan": "6.18",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.33",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.0.*",
"status": "unaffected",
"version": "7.0.10",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.1",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.33",
"versionStartIncluding": "6.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0.10",
"versionStartIncluding": "6.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.1",
"versionStartIncluding": "6.18",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\ndrm/xe/dma-buf: fix UAF with retry loop\n\nRetry doesn\u0027t work here, since bo will be freed on error, leading to\nUAF. However, now that we do the alloc \u0026 init before the attach, we can\nnow combine this as one unit and have the init do the alloc for us. This\nshould make the retry safe.\n\nReported by Sashiko.\n\nv2: Fix up the error unwind (CI)\n\n(cherry picked from commit 479669418253e0f27f8cf5db01a731352ea592e7)"
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 7.8,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:L - Reachable through the local DRM_IOCTL_PRIME_FD_TO_HANDLE ioctl on an Intel Xe DRM device by importing a dma-buf FD into the Xe driver. This is a local syscall/ioctl path, not a network, adjacent, or physical attack surface.\nAC:L - The UAF arises from attacker-triggerable retry/error handling in the dma-buf import path; a local attacker can repeatedly import dma-bufs and create contention/pressure to exercise the retry loop. No condition appears to require an uncontrollable victim action or rare external state.\nPR:L - The ioctl is DRM_RENDER_ALLOW and Xe supports render nodes, with no CAP_SYS_ADMIN, DRM master, or authentication gate in the path. The attacker needs only local access to the DRM render device and a dma-buf FD, so this is low privilege.\nUI:N - No victim user action is required once the attacker has local access to the device node. The attacker can invoke the ioctl and drive the relevant dma-buf operations directly.\nS:U - The bug corrupts kernel DRM/Xe memory from within the same kernel security authority. It does not inherently cross a VM, IOMMU, or other separate security scope boundary.\nC:H - This is a kernel heap use-after-free involving a freed xe_bo/GEM object that can later be reused through cleanup or dma-buf move-notify paths. Such UAF memory corruption is defensibly capable of producing kernel memory disclosure.\nI:H - The stale xe_bo/GEM pointer can be used after free in object/refcount and move-notify handling, giving a plausible kernel heap corruption primitive. Under the requested scoring rule, this supports arbitrary modification or code execution impact.\nA:H - Even without full exploitation, the UAF can dereference or operate on freed/corrupted kernel objects and crash the kernel. Related Xe dma-buf fixes reported NULL dereferences and crashes in similar paths."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-05T12:31:59.874Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/39fdac6be02eb7c3460518c1c4085f75f935c4ce"
},
{
"url": "https://git.kernel.org/stable/c/827062952ed9bdf4220466c1f05ce452d04bdedf"
},
{
"url": "https://git.kernel.org/stable/c/155a372a1cc50fa93387c5d3cdfd614a61e1afd1"
}
],
"title": "drm/xe/dma-buf: fix UAF with retry loop",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-52950",
"datePublished": "2026-06-24T16:28:33.469Z",
"dateReserved": "2026-06-09T07:44:35.372Z",
"dateUpdated": "2026-08-05T12:31:59.874Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-52976 (GCVE-0-2026-52976)
Vulnerability from cvelistv5
Published
2026-06-24 16:28
Modified
2026-08-10 12:05
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl()
Two error handling issues exist in xe_exec_queue_create_ioctl():
1. When xe_hw_engine_group_add_exec_queue() fails, the error path jumps
to put_exec_queue which skips xe_exec_queue_kill(). If the VM is in
preempt fence mode, xe_vm_add_compute_exec_queue() has already added
the queue to the VM's compute exec queue list. Skipping the kill
leaves the queue on that list, leading to a dangling pointer after
the queue is freed.
2. When xa_alloc() fails after xe_hw_engine_group_add_exec_queue() has
succeeded, the error path does not call
xe_hw_engine_group_del_exec_queue() to remove the queue from the hw
engine group list. The queue is then freed while still linked into
the hw engine group, causing a use-after-free.
Fix both by:
- Changing the xe_hw_engine_group_add_exec_queue() failure path to jump
to kill_exec_queue so that xe_exec_queue_kill() properly removes the
queue from the VM's compute list.
- Adding a del_hw_engine_group label before kill_exec_queue for the
xa_alloc() failure path, which removes the queue from the hw engine
group before proceeding with the rest of the cleanup.
(cherry picked from commit 37c831f401746a45d510b312b0ed7a77b1e06ec8)
References
| URL | Tags | |
|---|---|---|
Impacted products
{
"containers": {
"adp": [
{
"affected": [
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:10.2"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 10",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:6.12.0-211.37.1.el10_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:9",
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-687.30.1.el9_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:6"
],
"defaultStatus": "unaffected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 6",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "unaffected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "unaffected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:8"
],
"defaultStatus": "unaffected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:8"
],
"defaultStatus": "unaffected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat"
}
],
"datePublic": "2026-06-24T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A flaw was found in the Linux kernel. Specifically, within the `drm/xe` graphics driver, two error handling issues in the `xe_exec_queue_create_ioctl()` function could lead to memory corruption. This could result in a dangling pointer or a use-after-free vulnerability. A local attacker could potentially exploit these issues to cause a system crash (denial of service) or gain elevated privileges."
}
],
"metrics": [
{
"other": {
"content": {
"namespace": "https://access.redhat.com/security/updates/classification/",
"value": "Important"
},
"type": "Red Hat severity rating"
}
},
{
"cvssV3_1": {
"attackComplexity": "HIGH",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 7,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-825",
"description": "Expired Pointer Dereference",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-10T12:05:53.541Z",
"orgId": "0b0ca135-0b70-47e7-9f44-1890c2a1c46c",
"shortName": "redhat-SADP"
},
"references": [
{
"tags": [
"vdb-entry",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/security/cve/CVE-2026-52976"
},
{
"name": "RHBZ#2492284",
"tags": [
"issue-tracking",
"x_refsource_REDHAT"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=2492284"
},
{
"tags": [
"x_sadp-csaf-vex"
],
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-52976.json"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:52764"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:42919"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:52667"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:45192"
}
],
"solutions": [
{
"lang": "en",
"value": "RHSA-2026:52764: Red Hat Enterprise Linux AppStream EUS (v. 10.0), Red Hat Enterprise Linux BaseOS EUS (v. 10.0), Red Hat Enterprise Linux CodeReady Linux Builder EUS (v. 10.0), Red Hat Enterprise Linux Real Time EUS (v. 10.0), Red Hat Enterprise Linux Real Time for NFV EUS (v. 10.0)"
},
{
"lang": "en",
"value": "RHSA-2026:42919: Red Hat Enterprise Linux AppStream (v. 10), Red Hat Enterprise Linux BaseOS (v. 10), Red Hat Enterprise Linux CodeReady Linux Builder (v. 10), Red Hat Enterprise Linux Real Time (v. 10), Red Hat Enterprise Linux Real Time for NFV (v. 10)"
},
{
"lang": "en",
"value": "RHSA-2026:52667: Red Hat CodeReady Linux Builder EUS (v.9.6), Red Hat Enterprise Linux AppStream EUS (v.9.6), Red Hat Enterprise Linux BaseOS EUS (v.9.6), Red Hat Enterprise Linux Real Time EUS (v.9.6), Red Hat Enterprise Linux Real Time for NFV EUS (v.9.6)"
},
{
"lang": "en",
"value": "RHSA-2026:45192: Red Hat Enterprise Linux AppStream (v. 9), Red Hat Enterprise Linux BaseOS (v. 9), Red Hat Enterprise Linux CodeReady Linux Builder (v. 9), Red Hat Enterprise Linux Real Time (v. 9), Red Hat Enterprise Linux Real Time for NFV (v. 9)"
}
],
"timeline": [
{
"lang": "en",
"time": "2026-06-24T00:00:00.000Z",
"value": "Reported to Red Hat."
},
{
"lang": "en",
"time": "2026-06-24T00:00:00.000Z",
"value": "Made public."
}
],
"title": "kernel: drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl()",
"x_adpType": "supplier",
"x_generator": {
"engine": "sadp-cli 1.0.0"
}
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/gpu/drm/xe/xe_exec_queue.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "f93b00161213a0fe9f7ff1d8498ee5ca9e0a5c43",
"status": "affected",
"version": "7970cb36966c9b9183255dc097ae0446300eebcf",
"versionType": "git"
},
{
"lessThan": "753b149d5a433eb19e0c1b0eb4526a6e26120d1f",
"status": "affected",
"version": "7970cb36966c9b9183255dc097ae0446300eebcf",
"versionType": "git"
},
{
"lessThan": "1be55646d8a2035343b012dcb12210db7bb8b056",
"status": "affected",
"version": "7970cb36966c9b9183255dc097ae0446300eebcf",
"versionType": "git"
},
{
"lessThan": "f3cc22d4df3ed58439ea7e21daa54c3608e03b78",
"status": "affected",
"version": "7970cb36966c9b9183255dc097ae0446300eebcf",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/gpu/drm/xe/xe_exec_queue.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "6.12"
},
{
"lessThan": "6.12",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.91",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.33",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.0.*",
"status": "unaffected",
"version": "7.0.10",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.1",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.91",
"versionStartIncluding": "6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.33",
"versionStartIncluding": "6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0.10",
"versionStartIncluding": "6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.1",
"versionStartIncluding": "6.12",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\ndrm/xe: Fix error cleanup in xe_exec_queue_create_ioctl()\n\nTwo error handling issues exist in xe_exec_queue_create_ioctl():\n\n1. When xe_hw_engine_group_add_exec_queue() fails, the error path jumps\n to put_exec_queue which skips xe_exec_queue_kill(). If the VM is in\n preempt fence mode, xe_vm_add_compute_exec_queue() has already added\n the queue to the VM\u0027s compute exec queue list. Skipping the kill\n leaves the queue on that list, leading to a dangling pointer after\n the queue is freed.\n\n2. When xa_alloc() fails after xe_hw_engine_group_add_exec_queue() has\n succeeded, the error path does not call\n xe_hw_engine_group_del_exec_queue() to remove the queue from the hw\n engine group list. The queue is then freed while still linked into\n the hw engine group, causing a use-after-free.\n\nFix both by:\n- Changing the xe_hw_engine_group_add_exec_queue() failure path to jump\n to kill_exec_queue so that xe_exec_queue_kill() properly removes the\n queue from the VM\u0027s compute list.\n- Adding a del_hw_engine_group label before kill_exec_queue for the\n xa_alloc() failure path, which removes the queue from the hw engine\n group before proceeding with the rest of the cleanup.\n\n(cherry picked from commit 37c831f401746a45d510b312b0ed7a77b1e06ec8)"
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 7.8,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:L - The vulnerable code is reached through the local DRM Xe `XE_EXEC_QUEUE_CREATE` ioctl on a GPU device/render node. It is not reachable by remote network traffic or adjacent/physical input.\nAC:L - The attacker controls the ioctl sequence and can drive the relevant error cleanup paths through local resource pressure or interruptible operations. No uncontrollable race or rare victim state is required for the dangling queue pointer to be created and later exercised.\nPR:L - The ioctl is registered with `DRM_RENDER_ALLOW`, with no root, DRM master, or authentication requirement, so an unprivileged local GPU client that can open the render node can reach it. This is basic local user access, not real administrator privilege.\nUI:N - Exploitation only requires the attacker to issue ioctls from their own process. No victim user action is needed.\nS:U - The bug is within the kernel DRM Xe driver and impacts kernel resources under the same OS security authority. It does not cross a VM, hypervisor, or IOMMU security boundary by itself.\nC:H - The cleanup bug leaves a freed `struct xe_exec_queue` linked into VM or hardware-engine-group lists, creating a use-after-free. Under the required kernel scoring guidance, UAF memory corruption is treated as enabling high confidentiality impact.\nI:H - The stale list entry is later dereferenced through queue fields and operation pointers, making this kernel heap use-after-free potentially exploitable for control-flow or memory corruption. Under the required guidance, UAF implies high integrity impact.\nA:H - The dangling pointer can be reached by later VM or engine-group list traversal and can cause kernel oops, panic, or hang. A local attacker can trigger the condition repeatedly, so availability impact is high."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-05T12:32:18.172Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/f93b00161213a0fe9f7ff1d8498ee5ca9e0a5c43"
},
{
"url": "https://git.kernel.org/stable/c/753b149d5a433eb19e0c1b0eb4526a6e26120d1f"
},
{
"url": "https://git.kernel.org/stable/c/1be55646d8a2035343b012dcb12210db7bb8b056"
},
{
"url": "https://git.kernel.org/stable/c/f3cc22d4df3ed58439ea7e21daa54c3608e03b78"
}
],
"title": "drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl()",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-52976",
"datePublished": "2026-06-24T16:28:53.147Z",
"dateReserved": "2026-06-09T07:44:35.376Z",
"dateUpdated": "2026-08-10T12:05:53.541Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-52923 (GCVE-0-2026-52923)
Vulnerability from cvelistv5
Published
2026-06-24 07:14
Modified
2026-08-28 12:04
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
ipc: limit next_id allocation to the valid ID range
The checkpoint/restore sysctl path can request the next SysV IPC id
through ids->next_id. ipc_idr_alloc() currently forwards that request to
idr_alloc() with an open-ended upper bound.
If the valid tail of the SysV IPC id space is full, the allocation can
spill beyond ipc_mni. The returned SysV IPC id still uses the normal
index encoding, so later lookup and removal can target the wrong slot.
This leaves the real IDR entry behind and breaks the IDR state for the
object.
The bug is in ipc_idr_alloc() in the checkpoint/restore path.
1. ids->next_id is passed to:
idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...)
2. The zero upper bound makes the allocation effectively open-ended.
Once the valid SysV IPC tail is occupied, idr_alloc() can spill past
ipc_mni and allocate an entry beyond the valid IPC id range.
3. The new object id is still encoded with the narrower SysV IPC index
width:
new->id = (new->seq << ipcmni_seq_shift()) + idx
4. Later removal goes through ipc_rmid(), which uses:
ipcid_to_idx(ipcp->id)
That truncates the real IDR index. An object actually stored at a
high index can then be removed as if it lived at a low in-range
index.
5. For shared memory, shm_destroy() frees the current object anyway, but
the real high IDR slot is left behind as a dangling pointer.
6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry
and dereferences freed memory.
Prevent this by bounding the requested allocation to ipc_mni so the
checkpoint/restore path fails once the valid range is exhausted.
References
| URL | Tags | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Linux | Linux |
Version: 03f595668017f1a1fb971c02fc37140bc6e7bb1c Version: 03f595668017f1a1fb971c02fc37140bc6e7bb1c Version: 03f595668017f1a1fb971c02fc37140bc6e7bb1c Version: 03f595668017f1a1fb971c02fc37140bc6e7bb1c Version: 03f595668017f1a1fb971c02fc37140bc6e7bb1c Version: 03f595668017f1a1fb971c02fc37140bc6e7bb1c Version: 03f595668017f1a1fb971c02fc37140bc6e7bb1c Version: 03f595668017f1a1fb971c02fc37140bc6e7bb1c |
||
{
"containers": {
"adp": [
{
"affected": [
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:10.2"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 10",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:6.12.0-211.46.1.el10_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux_eus:10.0"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 10.0 Extended Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:6.12.0-55.95.1.el10_0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:8::nfv"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-553.151.1.rt7.492.el8_10",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:8"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-553.151.1.el8_10",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_aus:8.4"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.4 Advanced Mission Critical Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-305.200.1.el8_4",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_eus_long_life:8.4"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.4 Extended Update Support Long-Life Add-On",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-305.200.1.el8_4",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_tus:8.8"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.8 Telecommunications Update Service",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-477.158.1.el8_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_e4s:8.8"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.8 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-477.158.1.el8_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:9",
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-687.33.1.el9_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_e4s:9.2"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9.2 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-284.186.1.el9_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_e4s:9.2::nfv"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 9.2 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-284.186.1.rt14.471.el9_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_e4s:9.4"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9.4 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-427.141.1.el9_4",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_eus:9.6"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9.6 Extended Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-570.131.1.el9_6",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:6"
],
"defaultStatus": "unknown",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 6",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat"
}
],
"datePublic": "2026-06-24T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A flaw was found in the Linux kernel. The `ipc_idr_alloc()` function, used in the checkpoint/restore path for SysV Inter-Process Communication (IPC) ID allocation, does not properly limit ID allocation to the valid range. This can result in the system attempting to dereference freed memory, leading to a use-after-free vulnerability. This issue could potentially cause system instability or information disclosure."
}
],
"metrics": [
{
"other": {
"content": {
"namespace": "https://access.redhat.com/security/updates/classification/",
"value": "Important"
},
"type": "Red Hat severity rating"
}
},
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 7.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-825",
"description": "Expired Pointer Dereference",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-28T12:04:16.286Z",
"orgId": "0b0ca135-0b70-47e7-9f44-1890c2a1c46c",
"shortName": "redhat-SADP"
},
"references": [
{
"tags": [
"vdb-entry",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/security/cve/CVE-2026-52923"
},
{
"name": "RHBZ#2492094",
"tags": [
"issue-tracking",
"x_refsource_REDHAT"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=2492094"
},
{
"tags": [
"x_sadp-csaf-vex"
],
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-52923.json"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:52764"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:53330"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:51603"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:48386"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:49031"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:49212"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:49857"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:47248"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:52649"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:49851"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:51604"
}
],
"solutions": [
{
"lang": "en",
"value": "RHSA-2026:52764: Red Hat Enterprise Linux AppStream EUS (v. 10.0), Red Hat Enterprise Linux BaseOS EUS (v. 10.0), Red Hat Enterprise Linux CodeReady Linux Builder EUS (v. 10.0), Red Hat Enterprise Linux Real Time EUS (v. 10.0), Red Hat Enterprise Linux Real Time for NFV EUS (v. 10.0)"
},
{
"lang": "en",
"value": "RHSA-2026:53330: Red Hat Enterprise Linux AppStream (v. 10), Red Hat Enterprise Linux BaseOS (v. 10), Red Hat Enterprise Linux CodeReady Linux Builder (v. 10), Red Hat Enterprise Linux Real Time (v. 10), Red Hat Enterprise Linux Real Time for NFV (v. 10)"
},
{
"lang": "en",
"value": "RHSA-2026:51603: Red Hat Enterprise Linux AppStream E4S (v.9.2), Red Hat Enterprise Linux BaseOS E4S (v.9.2)"
},
{
"lang": "en",
"value": "RHSA-2026:48386: Red Hat Enterprise Linux AppStream E4S (v.9.4), Red Hat Enterprise Linux BaseOS E4S (v.9.4), Red Hat Enterprise Linux Real Time E4S (v.9.4), Red Hat Enterprise Linux Real Time for NFV E4S (v.9.4)"
},
{
"lang": "en",
"value": "RHSA-2026:49031: Red Hat CodeReady Linux Builder EUS (v.9.6), Red Hat Enterprise Linux AppStream EUS (v.9.6), Red Hat Enterprise Linux BaseOS EUS (v.9.6), Red Hat Enterprise Linux Real Time EUS (v.9.6), Red Hat Enterprise Linux Real Time for NFV EUS (v.9.6)"
},
{
"lang": "en",
"value": "RHSA-2026:49212: Red Hat Enterprise Linux AppStream (v. 9), Red Hat Enterprise Linux BaseOS (v. 9), Red Hat Enterprise Linux CodeReady Linux Builder (v. 9), Red Hat Enterprise Linux Real Time (v. 9), Red Hat Enterprise Linux Real Time for NFV (v. 9)"
},
{
"lang": "en",
"value": "RHSA-2026:49857: Red Hat Enterprise Linux BaseOS (v. 8), Red Hat Enterprise Linux CRB (v. 8)"
},
{
"lang": "en",
"value": "RHSA-2026:47248: Red Hat Enterprise Linux BaseOS AUS (v.8.4), Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.4)"
},
{
"lang": "en",
"value": "RHSA-2026:52649: Red Hat Enterprise Linux BaseOS E4S (v.8.8), Red Hat Enterprise Linux BaseOS TUS (v.8.8)"
},
{
"lang": "en",
"value": "RHSA-2026:49851: Red Hat Enterprise Linux NFV (v. 8), Red Hat Enterprise Linux RT (v. 8)"
},
{
"lang": "en",
"value": "RHSA-2026:51604: Red Hat Enterprise Linux Real Time E4S (v.9.2), Red Hat Enterprise Linux Real Time for NFV E4S (v.9.2)"
}
],
"timeline": [
{
"lang": "en",
"time": "2026-06-24T00:00:00.000Z",
"value": "Reported to Red Hat."
},
{
"lang": "en",
"time": "2026-06-24T00:00:00.000Z",
"value": "Made public."
}
],
"title": "kernel: ipc: limit next_id allocation to the valid ID range",
"workarounds": [
{
"lang": "en",
"value": "Mitigation for this issue is either not available or the currently available options do not meet the Red Hat Product Security criteria comprising ease of use and deployment, applicability to widespread installation base, or stability."
}
],
"x_adpType": "supplier",
"x_generator": {
"engine": "sadp-cli 1.0.0"
}
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"ipc/util.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "3bbe2bb9111ce6967a951bfac79af142d816fae5",
"status": "affected",
"version": "03f595668017f1a1fb971c02fc37140bc6e7bb1c",
"versionType": "git"
},
{
"lessThan": "8c58a92849175f5e2ab7bc2734b3b89afe79f6ef",
"status": "affected",
"version": "03f595668017f1a1fb971c02fc37140bc6e7bb1c",
"versionType": "git"
},
{
"lessThan": "af24e202b543ded8a34f1d5d3db54eb916173f04",
"status": "affected",
"version": "03f595668017f1a1fb971c02fc37140bc6e7bb1c",
"versionType": "git"
},
{
"lessThan": "157ce2c6836ce0ff19108a819f38df061345425f",
"status": "affected",
"version": "03f595668017f1a1fb971c02fc37140bc6e7bb1c",
"versionType": "git"
},
{
"lessThan": "41058d4c3f63ab64901560a704882e0565f4e456",
"status": "affected",
"version": "03f595668017f1a1fb971c02fc37140bc6e7bb1c",
"versionType": "git"
},
{
"lessThan": "a3cc795129e5ec0f8948653a3bf471e7d8852f5e",
"status": "affected",
"version": "03f595668017f1a1fb971c02fc37140bc6e7bb1c",
"versionType": "git"
},
{
"lessThan": "bd4be70669af55b974860d13680348cfdf50bbed",
"status": "affected",
"version": "03f595668017f1a1fb971c02fc37140bc6e7bb1c",
"versionType": "git"
},
{
"lessThan": "fa0b9b2b7ae3539908d69c2b9ac0d144d9bc5139",
"status": "affected",
"version": "03f595668017f1a1fb971c02fc37140bc6e7bb1c",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"ipc/util.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "3.8"
},
{
"lessThan": "3.8",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.259",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.210",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.176",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.143",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.93",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.35",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.0.*",
"status": "unaffected",
"version": "7.0.12",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.1",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.259",
"versionStartIncluding": "3.8",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.210",
"versionStartIncluding": "3.8",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.176",
"versionStartIncluding": "3.8",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.143",
"versionStartIncluding": "3.8",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.93",
"versionStartIncluding": "3.8",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.35",
"versionStartIncluding": "3.8",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0.12",
"versionStartIncluding": "3.8",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.1",
"versionStartIncluding": "3.8",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nipc: limit next_id allocation to the valid ID range\n\nThe checkpoint/restore sysctl path can request the next SysV IPC id\nthrough ids-\u003enext_id. ipc_idr_alloc() currently forwards that request to\nidr_alloc() with an open-ended upper bound.\n\nIf the valid tail of the SysV IPC id space is full, the allocation can\nspill beyond ipc_mni. The returned SysV IPC id still uses the normal\nindex encoding, so later lookup and removal can target the wrong slot. \nThis leaves the real IDR entry behind and breaks the IDR state for the\nobject.\n\nThe bug is in ipc_idr_alloc() in the checkpoint/restore path.\n\n1. ids-\u003enext_id is passed to:\n\n idr_alloc(\u0026ids-\u003eipcs_idr, new, ipcid_to_idx(next_id), 0, ...)\n\n2. The zero upper bound makes the allocation effectively open-ended.\n Once the valid SysV IPC tail is occupied, idr_alloc() can spill past\n ipc_mni and allocate an entry beyond the valid IPC id range.\n\n3. The new object id is still encoded with the narrower SysV IPC index\n width:\n\n new-\u003eid = (new-\u003eseq \u003c\u003c ipcmni_seq_shift()) + idx\n\n4. Later removal goes through ipc_rmid(), which uses:\n\n ipcid_to_idx(ipcp-\u003eid)\n\n That truncates the real IDR index. An object actually stored at a\n high index can then be removed as if it lived at a low in-range\n index.\n\n5. For shared memory, shm_destroy() frees the current object anyway, but\n the real high IDR slot is left behind as a dangling pointer.\n\n6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry\n and dereferences freed memory.\n\nPrevent this by bounding the requested allocation to ipc_mni so the\ncheckpoint/restore path fails once the valid range is exhausted."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 7.8,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:L - The vulnerable path is reached through local SysV IPC syscalls plus writes to `/proc/sys/kernel/*_next_id`, not through network or physical input.\nAC:L - The attacker controls the sysctl value, IPC allocation pattern, removal, and proc/syscall enumeration needed to trigger the stale IDR pointer; filling the valid ID tail is resource-intensive but deterministic.\nPR:L - A basic local user can reasonably reach this via unprivileged user namespaces by creating a user/IPC namespace and gaining the namespace capabilities needed for the checkpoint/restore sysctls.\nUI:N - No victim action is required after the local attacker runs the sysctl and SysV IPC operations.\nS:U - This is a standard kernel memory corruption/local privilege escalation class issue within the same kernel security authority.\nC:H - The bug leaves a freed SysV IPC object reachable through the IDR, producing a kernel use-after-free; UAFs are scored as high confidentiality impact because reclaimed kernel heap contents can be exposed or used for read primitives.\nI:H - The stale pointer/use-after-free can plausibly be exploited through heap reuse for kernel memory corruption and control-flow or object manipulation, so integrity impact is high.\nA:H - Even without full exploitation, walking `/proc/sysvipc/shm` or related enumeration can dereference freed memory and crash or hang the kernel."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-05T12:31:44.559Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/3bbe2bb9111ce6967a951bfac79af142d816fae5"
},
{
"url": "https://git.kernel.org/stable/c/8c58a92849175f5e2ab7bc2734b3b89afe79f6ef"
},
{
"url": "https://git.kernel.org/stable/c/af24e202b543ded8a34f1d5d3db54eb916173f04"
},
{
"url": "https://git.kernel.org/stable/c/157ce2c6836ce0ff19108a819f38df061345425f"
},
{
"url": "https://git.kernel.org/stable/c/41058d4c3f63ab64901560a704882e0565f4e456"
},
{
"url": "https://git.kernel.org/stable/c/a3cc795129e5ec0f8948653a3bf471e7d8852f5e"
},
{
"url": "https://git.kernel.org/stable/c/bd4be70669af55b974860d13680348cfdf50bbed"
},
{
"url": "https://git.kernel.org/stable/c/fa0b9b2b7ae3539908d69c2b9ac0d144d9bc5139"
}
],
"title": "ipc: limit next_id allocation to the valid ID range",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-52923",
"datePublished": "2026-06-24T07:14:17.849Z",
"dateReserved": "2026-06-09T07:44:35.367Z",
"dateUpdated": "2026-08-28T12:04:16.286Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-43027 (GCVE-0-2026-43027)
Vulnerability from cvelistv5
Published
2026-05-01 14:15
Modified
2026-07-14 12:49
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_helper: pass helper to expect cleanup
nf_conntrack_helper_unregister() calls nf_ct_expect_iterate_destroy()
to remove expectations belonging to the helper being unregistered.
However, it passes NULL instead of the helper pointer as the data
argument, so expect_iter_me() never matches any expectation and all
of them survive the cleanup.
After unregister returns, nfnl_cthelper_del() frees the helper
object immediately. Subsequent expectation dumps or packet-driven
init_conntrack() calls then dereference the freed exp->helper,
causing a use-after-free.
Pass the actual helper pointer so expectations referencing it are
properly destroyed before the helper object is freed.
BUG: KASAN: slab-use-after-free in string+0x38f/0x430
Read of size 1 at addr ffff888003b14d20 by task poc/103
Call Trace:
string+0x38f/0x430
vsnprintf+0x3cc/0x1170
seq_printf+0x17a/0x240
exp_seq_show+0x2e5/0x560
seq_read_iter+0x419/0x1280
proc_reg_read+0x1ac/0x270
vfs_read+0x179/0x930
ksys_read+0xef/0x1c0
Freed by task 103:
The buggy address is located 32 bytes inside of
freed 192-byte region [ffff888003b14d00, ffff888003b14dc0)
References
| URL | Tags | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Linux | Linux |
Version: ac7b848390036dadd4351899d2a23748075916bd Version: ac7b848390036dadd4351899d2a23748075916bd Version: ac7b848390036dadd4351899d2a23748075916bd Version: ac7b848390036dadd4351899d2a23748075916bd Version: ac7b848390036dadd4351899d2a23748075916bd Version: ac7b848390036dadd4351899d2a23748075916bd Version: ac7b848390036dadd4351899d2a23748075916bd Version: ac7b848390036dadd4351899d2a23748075916bd |
||
{
"containers": {
"adp": [
{
"affected": [
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-14T12:49:02.973Z",
"orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"shortName": "siemens-SADP"
},
"references": [
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-082556.html"
},
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-019113.html"
}
],
"x_adpType": "supplier"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"net/netfilter/nf_conntrack_helper.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "5cf28d5c8dcbbe8af6d3b145babe491906d7bad1",
"status": "affected",
"version": "ac7b848390036dadd4351899d2a23748075916bd",
"versionType": "git"
},
{
"lessThan": "504ba4168466c91210c45acdc332479cfd5f2da6",
"status": "affected",
"version": "ac7b848390036dadd4351899d2a23748075916bd",
"versionType": "git"
},
{
"lessThan": "dc1739eff48e34cc71d4e2f03715493fbcebd8af",
"status": "affected",
"version": "ac7b848390036dadd4351899d2a23748075916bd",
"versionType": "git"
},
{
"lessThan": "2cf2737c85a2ba2b52024dafe68ffad2676f97be",
"status": "affected",
"version": "ac7b848390036dadd4351899d2a23748075916bd",
"versionType": "git"
},
{
"lessThan": "2c16e4d64dd91227742dfe196a3e7b0568bef65a",
"status": "affected",
"version": "ac7b848390036dadd4351899d2a23748075916bd",
"versionType": "git"
},
{
"lessThan": "620f3d14c1ef51d425060a3056ad8dbae8f998a3",
"status": "affected",
"version": "ac7b848390036dadd4351899d2a23748075916bd",
"versionType": "git"
},
{
"lessThan": "90bd7e8501349db3006d21fbc09df9ffcb172965",
"status": "affected",
"version": "ac7b848390036dadd4351899d2a23748075916bd",
"versionType": "git"
},
{
"lessThan": "a242a9ae58aa46ff7dae51ce64150a93957abe65",
"status": "affected",
"version": "ac7b848390036dadd4351899d2a23748075916bd",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"net/netfilter/nf_conntrack_helper.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "4.14"
},
{
"lessThan": "4.14",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.253",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.203",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.168",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.134",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.81",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.22",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.19.*",
"status": "unaffected",
"version": "6.19.12",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.0",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.253",
"versionStartIncluding": "4.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.203",
"versionStartIncluding": "4.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.168",
"versionStartIncluding": "4.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.134",
"versionStartIncluding": "4.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.81",
"versionStartIncluding": "4.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.22",
"versionStartIncluding": "4.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.19.12",
"versionStartIncluding": "4.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0",
"versionStartIncluding": "4.14",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnetfilter: nf_conntrack_helper: pass helper to expect cleanup\n\nnf_conntrack_helper_unregister() calls nf_ct_expect_iterate_destroy()\nto remove expectations belonging to the helper being unregistered.\nHowever, it passes NULL instead of the helper pointer as the data\nargument, so expect_iter_me() never matches any expectation and all\nof them survive the cleanup.\n\nAfter unregister returns, nfnl_cthelper_del() frees the helper\nobject immediately. Subsequent expectation dumps or packet-driven\ninit_conntrack() calls then dereference the freed exp-\u003ehelper,\ncausing a use-after-free.\n\nPass the actual helper pointer so expectations referencing it are\nproperly destroyed before the helper object is freed.\n\n BUG: KASAN: slab-use-after-free in string+0x38f/0x430\n Read of size 1 at addr ffff888003b14d20 by task poc/103\n Call Trace:\n string+0x38f/0x430\n vsnprintf+0x3cc/0x1170\n seq_printf+0x17a/0x240\n exp_seq_show+0x2e5/0x560\n seq_read_iter+0x419/0x1280\n proc_reg_read+0x1ac/0x270\n vfs_read+0x179/0x930\n ksys_read+0xef/0x1c0\n Freed by task 103:\n The buggy address is located 32 bytes inside of\n freed 192-byte region [ffff888003b14d00, ffff888003b14dc0)"
}
],
"providerMetadata": {
"dateUpdated": "2026-05-11T22:16:18.081Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/5cf28d5c8dcbbe8af6d3b145babe491906d7bad1"
},
{
"url": "https://git.kernel.org/stable/c/504ba4168466c91210c45acdc332479cfd5f2da6"
},
{
"url": "https://git.kernel.org/stable/c/dc1739eff48e34cc71d4e2f03715493fbcebd8af"
},
{
"url": "https://git.kernel.org/stable/c/2cf2737c85a2ba2b52024dafe68ffad2676f97be"
},
{
"url": "https://git.kernel.org/stable/c/2c16e4d64dd91227742dfe196a3e7b0568bef65a"
},
{
"url": "https://git.kernel.org/stable/c/620f3d14c1ef51d425060a3056ad8dbae8f998a3"
},
{
"url": "https://git.kernel.org/stable/c/90bd7e8501349db3006d21fbc09df9ffcb172965"
},
{
"url": "https://git.kernel.org/stable/c/a242a9ae58aa46ff7dae51ce64150a93957abe65"
}
],
"title": "netfilter: nf_conntrack_helper: pass helper to expect cleanup",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-43027",
"datePublished": "2026-05-01T14:15:28.521Z",
"dateReserved": "2026-05-01T14:12:55.976Z",
"dateUpdated": "2026-07-14T12:49:02.973Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-64530 (GCVE-0-2026-64530)
Vulnerability from cvelistv5
Published
2026-07-26 06:28
Modified
2026-08-17 04:57
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: Handle TC_ACT_CONSUMED in tcf_qevent_handle
tcf_classify() can return TC_ACT_CONSUMED while the skb is held by the
defragmentation engine (e.g. act_ct on out-of-order fragments). When
that happens the skb is no longer owned by the caller and must not be
touched again.
tcf_qevent_handle() did not handle TC_ACT_CONSUMED: it fell through the
switch and returned the skb to the caller as if classification had
passed. The only qdisc that wires up qevents today is RED, via three call sites
(qe_mark on RED_PROB_MARK/HARD_MARK, qe_early_drop on congestion_drop)
red_enqueue() was continuing to operate on an skb it no longer owns in this
case -- enqueueing it, dropping it, or updating statistics. Resulting in a UAF.
tc qdisc add dev eth0 root handle 1: red ... qevent early_drop block 10
tc filter add block 10 ... action ct
(with ct defrag enabled and traffic that produces out-of-order
fragments, e.g. a fragmented UDP stream)
Handle TC_ACT_CONSUMED in tcf_qevent_handle() the same way the ingress
and egress fast paths do: treat it as stolen and return NULL without
touching the skb. Unlike the TC_ACT_STOLEN case, the skb must not be
dropped/freed here, as it is no longer owned by us.
References
| URL | Tags | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|||||||||||||||||||||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Linux | Linux |
Version: 172ba7d46c202e679f3ccb10264c67416aaeb1c4 Version: 0b5b831122fc3789fff75be433ba3e4dd7b779d4 Version: 73f7da5fd124f2cda9161e2e46114915e6e82e97 Version: 3f14b377d01d8357eba032b4cabc8c1149b458b6 Version: 3f14b377d01d8357eba032b4cabc8c1149b458b6 Version: 3f14b377d01d8357eba032b4cabc8c1149b458b6 Version: 3f14b377d01d8357eba032b4cabc8c1149b458b6 Version: f5346df0591d10bc948761ca854b1fae6d2ef441 Version: 5.15.148 ≤ Version: 6.1.75 ≤ Version: 6.6.14 ≤ Version: 6.7.2 ≤ |
||
{
"containers": {
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"net/sched/cls_api.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "5ed3d6f85991656667059d3fa5a1d683ac58c447",
"status": "affected",
"version": "172ba7d46c202e679f3ccb10264c67416aaeb1c4",
"versionType": "git"
},
{
"lessThan": "f42e8134a3a1074b834a574d404352f867ba994a",
"status": "affected",
"version": "0b5b831122fc3789fff75be433ba3e4dd7b779d4",
"versionType": "git"
},
{
"lessThan": "447d493034a9cf7bf13a2abac86d0573d907ec2f",
"status": "affected",
"version": "73f7da5fd124f2cda9161e2e46114915e6e82e97",
"versionType": "git"
},
{
"lessThan": "e1270e69dcf2c3512c453484178f2e9dc0db3f05",
"status": "affected",
"version": "3f14b377d01d8357eba032b4cabc8c1149b458b6",
"versionType": "git"
},
{
"lessThan": "2140c2f3f2e7b066e1ae616ede8856cafd8015e9",
"status": "affected",
"version": "3f14b377d01d8357eba032b4cabc8c1149b458b6",
"versionType": "git"
},
{
"lessThan": "e28aedab9488343924d227b5a896faed67ce84d5",
"status": "affected",
"version": "3f14b377d01d8357eba032b4cabc8c1149b458b6",
"versionType": "git"
},
{
"lessThan": "a8a02897f2b479127db261de05cbf0c28b98d159",
"status": "affected",
"version": "3f14b377d01d8357eba032b4cabc8c1149b458b6",
"versionType": "git"
},
{
"status": "affected",
"version": "f5346df0591d10bc948761ca854b1fae6d2ef441",
"versionType": "git"
},
{
"lessThan": "5.15.212",
"status": "affected",
"version": "5.15.148",
"versionType": "semver"
},
{
"lessThan": "6.1.178",
"status": "affected",
"version": "6.1.75",
"versionType": "semver"
},
{
"lessThan": "6.6.145",
"status": "affected",
"version": "6.6.14",
"versionType": "semver"
},
{
"lessThan": "6.8",
"status": "affected",
"version": "6.7.2",
"versionType": "semver"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"net/sched/cls_api.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "6.8"
},
{
"lessThan": "6.8",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.212",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.178",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.145",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.97",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.40",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.1.*",
"status": "unaffected",
"version": "7.1.5",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.2",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.212",
"versionStartIncluding": "5.15.148",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.178",
"versionStartIncluding": "6.1.75",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.145",
"versionStartIncluding": "6.6.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.97",
"versionStartIncluding": "6.8",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.40",
"versionStartIncluding": "6.8",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.1.5",
"versionStartIncluding": "6.8",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.2",
"versionStartIncluding": "6.8",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "6.7.2",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnet/sched: cls_api: Handle TC_ACT_CONSUMED in tcf_qevent_handle\n\ntcf_classify() can return TC_ACT_CONSUMED while the skb is held by the\ndefragmentation engine (e.g. act_ct on out-of-order fragments). When\nthat happens the skb is no longer owned by the caller and must not be\ntouched again.\n\ntcf_qevent_handle() did not handle TC_ACT_CONSUMED: it fell through the\nswitch and returned the skb to the caller as if classification had\npassed. The only qdisc that wires up qevents today is RED, via three call sites\n(qe_mark on RED_PROB_MARK/HARD_MARK, qe_early_drop on congestion_drop)\nred_enqueue() was continuing to operate on an skb it no longer owns in this\ncase -- enqueueing it, dropping it, or updating statistics. Resulting in a UAF.\n\n tc qdisc add dev eth0 root handle 1: red ... qevent early_drop block 10\n tc filter add block 10 ... action ct\n\n (with ct defrag enabled and traffic that produces out-of-order\n fragments, e.g. a fragmented UDP stream)\n\nHandle TC_ACT_CONSUMED in tcf_qevent_handle() the same way the ingress\nand egress fast paths do: treat it as stolen and return NULL without\ntouching the skb. Unlike the TC_ACT_STOLEN case, the skb must not be\ndropped/freed here, as it is no longer owned by us."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:N - On a transparent bridge or traffic-shaping gateway configured with the RED qevent and act_ct, unauthenticated remote IP fragments reach red_enqueue() through normal receive, bridge-forwarding, and egress-qdisc processing. No local netlink access is required to trigger the deployed configuration.\nAC:L - The attacker controls fragment contents and ordering and can drive RED into deterministic hard-mark or drop conditions with sustained traffic. No race or condition outside the attacker\u0027s control must be won.\nPR:N - CAP_NET_ADMIN is required to create the vulnerable configuration, but a remote attacker sending fragments through an already configured appliance needs no privileges or authentication. Local triggering is also possible with namespaced CAP_NET_ADMIN.\nUI:N - Triggering requires only attacker-generated fragmented traffic and does not depend on a victim performing any action.\nS:U - The corruption occurs within the host kernel and compromises resources governed by that same security authority. This remains unchanged scope even when used for namespace escape or kernel privilege escalation.\nC:H - The reclaimable sk_buff use-after-free and corrupted defragmentation-tree links can be leveraged through attacker-controlled network heap spraying to disclose arbitrary kernel memory.\nI:H - RED overwrites linkage fields that overlap the defragmentation RB node and may free the object while it remains referenced, enabling subsequent writes through freed or attacker-reclaimed kernel objects and potential code execution.\nA:H - The dangling fragment-tree entry can cause immediate or deferred use-after-free, double-free, invalid tree operations, and kernel panic when another fragment arrives or the queue expires. The attacker can trigger this repeatedly with fragmented traffic."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-17T04:57:07.900Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/5ed3d6f85991656667059d3fa5a1d683ac58c447"
},
{
"url": "https://git.kernel.org/stable/c/f42e8134a3a1074b834a574d404352f867ba994a"
},
{
"url": "https://git.kernel.org/stable/c/447d493034a9cf7bf13a2abac86d0573d907ec2f"
},
{
"url": "https://git.kernel.org/stable/c/e1270e69dcf2c3512c453484178f2e9dc0db3f05"
},
{
"url": "https://git.kernel.org/stable/c/2140c2f3f2e7b066e1ae616ede8856cafd8015e9"
},
{
"url": "https://git.kernel.org/stable/c/e28aedab9488343924d227b5a896faed67ce84d5"
},
{
"url": "https://git.kernel.org/stable/c/a8a02897f2b479127db261de05cbf0c28b98d159"
}
],
"title": "net/sched: cls_api: Handle TC_ACT_CONSUMED in tcf_qevent_handle",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-64530",
"datePublished": "2026-07-26T06:28:42.970Z",
"dateReserved": "2026-07-19T15:36:31.794Z",
"dateUpdated": "2026-08-17T04:57:07.900Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-31684 (GCVE-0-2026-31684)
Vulnerability from cvelistv5
Published
2026-04-25 08:47
Modified
2026-06-01 16:13
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
net: sched: act_csum: validate nested VLAN headers
tcf_csum_act() walks nested VLAN headers directly from skb->data when an
skb still carries in-payload VLAN tags. The current code reads
vlan->h_vlan_encapsulated_proto and then pulls VLAN_HLEN bytes without
first ensuring that the full VLAN header is present in the linear area.
If only part of an inner VLAN header is linearized, accessing
h_vlan_encapsulated_proto reads past the linear area, and the following
skb_pull(VLAN_HLEN) may violate skb invariants.
Fix this by requiring pskb_may_pull(skb, VLAN_HLEN) before accessing and
pulling each nested VLAN header. If the header still is not fully
available, drop the packet through the existing error path.
References
| URL | Tags | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Linux | Linux |
Version: 2ecba2d1e45b24620a7c3df9531895cf68d5dec6 Version: 2ecba2d1e45b24620a7c3df9531895cf68d5dec6 Version: 2ecba2d1e45b24620a7c3df9531895cf68d5dec6 Version: 2ecba2d1e45b24620a7c3df9531895cf68d5dec6 Version: 2ecba2d1e45b24620a7c3df9531895cf68d5dec6 Version: 2ecba2d1e45b24620a7c3df9531895cf68d5dec6 Version: 2ecba2d1e45b24620a7c3df9531895cf68d5dec6 Version: 2ecba2d1e45b24620a7c3df9531895cf68d5dec6 Version: 3764bfae5056e95617b6ee074129297e11710886 Version: 4.19.99 ≤ |
||
{
"containers": {
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"net/sched/act_csum.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "0410c619e86551677fb79887a38eccad3f5a0725",
"status": "affected",
"version": "2ecba2d1e45b24620a7c3df9531895cf68d5dec6",
"versionType": "git"
},
{
"lessThan": "886469b6455611a511aa6013e957e15e50577513",
"status": "affected",
"version": "2ecba2d1e45b24620a7c3df9531895cf68d5dec6",
"versionType": "git"
},
{
"lessThan": "46c07ad50fa2f4ba7663ee1b72b75ad7ad45cf09",
"status": "affected",
"version": "2ecba2d1e45b24620a7c3df9531895cf68d5dec6",
"versionType": "git"
},
{
"lessThan": "eb3765b90eb8f2a3d6310a80c14a9e57ec4267a2",
"status": "affected",
"version": "2ecba2d1e45b24620a7c3df9531895cf68d5dec6",
"versionType": "git"
},
{
"lessThan": "a69738efea0996d05a3c7d2178551b891744df1b",
"status": "affected",
"version": "2ecba2d1e45b24620a7c3df9531895cf68d5dec6",
"versionType": "git"
},
{
"lessThan": "ec4930979b3f7bbeb7af5744599fc6603a4dba62",
"status": "affected",
"version": "2ecba2d1e45b24620a7c3df9531895cf68d5dec6",
"versionType": "git"
},
{
"lessThan": "3d165d975305cf76ff0b10a3c798fb31e5f5f9a5",
"status": "affected",
"version": "2ecba2d1e45b24620a7c3df9531895cf68d5dec6",
"versionType": "git"
},
{
"lessThan": "c842743d073bdd683606cb414eb0ca84465dd834",
"status": "affected",
"version": "2ecba2d1e45b24620a7c3df9531895cf68d5dec6",
"versionType": "git"
},
{
"status": "affected",
"version": "3764bfae5056e95617b6ee074129297e11710886",
"versionType": "git"
},
{
"lessThan": "4.20",
"status": "affected",
"version": "4.19.99",
"versionType": "semver"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"net/sched/act_csum.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "5.1"
},
{
"lessThan": "5.1",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.258",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.209",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.175",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.136",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.83",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.24",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.19.*",
"status": "unaffected",
"version": "6.19.14",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.0",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.258",
"versionStartIncluding": "5.1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.209",
"versionStartIncluding": "5.1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.175",
"versionStartIncluding": "5.1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.136",
"versionStartIncluding": "5.1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.83",
"versionStartIncluding": "5.1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.24",
"versionStartIncluding": "5.1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.19.14",
"versionStartIncluding": "5.1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0",
"versionStartIncluding": "5.1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "4.19.99",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnet: sched: act_csum: validate nested VLAN headers\n\ntcf_csum_act() walks nested VLAN headers directly from skb-\u003edata when an\nskb still carries in-payload VLAN tags. The current code reads\nvlan-\u003eh_vlan_encapsulated_proto and then pulls VLAN_HLEN bytes without\nfirst ensuring that the full VLAN header is present in the linear area.\n\nIf only part of an inner VLAN header is linearized, accessing\nh_vlan_encapsulated_proto reads past the linear area, and the following\nskb_pull(VLAN_HLEN) may violate skb invariants.\n\nFix this by requiring pskb_may_pull(skb, VLAN_HLEN) before accessing and\npulling each nested VLAN header. If the header still is not fully\navailable, drop the packet through the existing error path."
}
],
"providerMetadata": {
"dateUpdated": "2026-06-01T16:13:24.352Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/0410c619e86551677fb79887a38eccad3f5a0725"
},
{
"url": "https://git.kernel.org/stable/c/886469b6455611a511aa6013e957e15e50577513"
},
{
"url": "https://git.kernel.org/stable/c/46c07ad50fa2f4ba7663ee1b72b75ad7ad45cf09"
},
{
"url": "https://git.kernel.org/stable/c/eb3765b90eb8f2a3d6310a80c14a9e57ec4267a2"
},
{
"url": "https://git.kernel.org/stable/c/a69738efea0996d05a3c7d2178551b891744df1b"
},
{
"url": "https://git.kernel.org/stable/c/ec4930979b3f7bbeb7af5744599fc6603a4dba62"
},
{
"url": "https://git.kernel.org/stable/c/3d165d975305cf76ff0b10a3c798fb31e5f5f9a5"
},
{
"url": "https://git.kernel.org/stable/c/c842743d073bdd683606cb414eb0ca84465dd834"
}
],
"title": "net: sched: act_csum: validate nested VLAN headers",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-31684",
"datePublished": "2026-04-25T08:47:01.555Z",
"dateReserved": "2026-03-09T15:48:24.130Z",
"dateUpdated": "2026-06-01T16:13:24.352Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-12505 (GCVE-0-2026-12505)
Vulnerability from cvelistv5
Published
2026-06-18 03:34
Modified
2026-08-25 12:05
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-250 - Execution with Unnecessary Privileges
Summary
A flaw was found in the cifs-utils package where the cifs.upcall helper fails to securely drop its root privileges before looking up user information inside a user-controlled environment. A local, low privileged attacker can exploit this by using a crafted request_key payload to trick the root-owned helper into entering a custom environment (namespace) containing a malicious NSS module. This forces the system to load the attacker's controlled NSS Module and configuration, allowing them to execute arbitrary commands as the root user, elevating their privileges and fully compromising the system.
References
| URL | Tags | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|||||||||||||||||||||||
Impacted products
| Vendor | Product | Version | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Red Hat | Red Hat Enterprise Linux 10 |
Unaffected: 0:7.6-1.el10_2 < * cpe:/o:redhat:enterprise_linux:10.2 |
||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-12505",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-06-18T15:50:32.866185Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-06-18T15:50:43.338Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
},
{
"affected": [
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:10.2"
],
"defaultStatus": "affected",
"packageName": "cifs-utils",
"product": "Red Hat Enterprise Linux 10",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:7.6-1.el10_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:8"
],
"defaultStatus": "affected",
"packageName": "cifs-utils",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:7.0-5.el8_10",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:9",
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "cifs-utils",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:7.6-2.el9_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:openshift:4.22::el9"
],
"defaultStatus": "affected",
"packageName": "rhcos",
"product": "Red Hat OpenShift Container Platform 4.22",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "4.22.9.8.202607220526-0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:6"
],
"defaultStatus": "unknown",
"packageName": "cifs-utils",
"product": "Red Hat Enterprise Linux 6",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "unaffected",
"packageName": "cifs-utils",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
}
],
"datePublic": "2026-06-16T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A flaw was found in the cifs-utils package where the cifs.upcall helper fails to securely drop its root privileges before looking up user information inside a user-controlled environment. A local, low privileged attacker can exploit this by using a crafted request_key payload to trick the root-owned helper into entering a custom environment (namespace) containing a malicious NSS module. This forces the system to load the attacker\u0027s controlled NSS Module and configuration, allowing them to execute arbitrary commands as the root user, elevating their privileges and fully compromising the system."
}
],
"metrics": [
{
"other": {
"content": {
"namespace": "https://access.redhat.com/security/updates/classification/",
"value": "Important"
},
"type": "Red Hat severity rating"
}
},
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 7.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-250",
"description": "Execution with Unnecessary Privileges",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-25T12:05:40.874Z",
"orgId": "0b0ca135-0b70-47e7-9f44-1890c2a1c46c",
"shortName": "redhat-SADP"
},
"references": [
{
"tags": [
"vdb-entry",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/security/cve/CVE-2026-12505"
},
{
"name": "RHBZ#2489805",
"tags": [
"issue-tracking",
"x_refsource_REDHAT"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=2489805"
},
{
"tags": [
"x_sadp-csaf-vex"
],
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-12505.json"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:44232"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:32990"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:39576"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:39575"
}
],
"solutions": [
{
"lang": "en",
"value": "RHSA-2026:44232: Red Hat OpenShift Container Platform 4.22"
},
{
"lang": "en",
"value": "RHSA-2026:32990: Red Hat Enterprise Linux AppStream (v. 10), Red Hat Enterprise Linux BaseOS (v. 10), Red Hat Enterprise Linux CodeReady Linux Builder (v. 10)"
},
{
"lang": "en",
"value": "RHSA-2026:39576: Red Hat Enterprise Linux AppStream (v. 9), Red Hat Enterprise Linux BaseOS (v. 9), Red Hat Enterprise Linux CodeReady Linux Builder (v. 9)"
},
{
"lang": "en",
"value": "RHSA-2026:39575: Red Hat Enterprise Linux BaseOS (v. 8), Red Hat Enterprise Linux CRB (v. 8)"
}
],
"timeline": [
{
"lang": "en",
"time": "2026-06-17T00:00:00.000Z",
"value": "Reported to Red Hat."
},
{
"lang": "en",
"time": "2026-06-16T00:00:00.000Z",
"value": "Made public."
}
],
"title": "cifs-utils: local privilege escalation via forged cifs.spnego key description in cifs.upcall",
"workarounds": [
{
"lang": "en",
"value": "Red Hat is not aware of a practical temporary workaround that fully mitigates this issue or meets Red Hat Product Security\u0027s standards for usability, deployment, applicability, or stability. Customers are advised to apply the relevant security updates when they become available."
}
],
"x_adpType": "supplier",
"x_generator": {
"engine": "sadp-cli 1.0.0"
}
}
],
"cna": {
"affected": [
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:10.2"
],
"defaultStatus": "affected",
"packageName": "cifs-utils",
"product": "Red Hat Enterprise Linux 10",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:7.6-1.el10_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:8::crb",
"cpe:/o:redhat:enterprise_linux:8::baseos"
],
"defaultStatus": "affected",
"packageName": "cifs-utils",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:7.0-5.el8_10",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:9::appstream",
"cpe:/a:redhat:enterprise_linux:9::crb",
"cpe:/o:redhat:enterprise_linux:9::baseos"
],
"defaultStatus": "affected",
"packageName": "cifs-utils",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:7.6-2.el9_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:9::appstream",
"cpe:/a:redhat:enterprise_linux:9::crb",
"cpe:/o:redhat:enterprise_linux:9::baseos"
],
"defaultStatus": "affected",
"packageName": "cifs-utils",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:7.6-2.el9_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:openshift:4.22::el9"
],
"defaultStatus": "affected",
"packageName": "rhcos",
"product": "Red Hat OpenShift Container Platform 4.22",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "4.22.9.8.202607220526-0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:6"
],
"defaultStatus": "unknown",
"packageName": "cifs-utils",
"product": "Red Hat Enterprise Linux 6",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "unaffected",
"packageName": "cifs-utils",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
}
],
"datePublic": "2026-06-16T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A flaw was found in the cifs-utils package where the cifs.upcall helper fails to securely drop its root privileges before looking up user information inside a user-controlled environment. A local, low privileged attacker can exploit this by using a crafted request_key payload to trick the root-owned helper into entering a custom environment (namespace) containing a malicious NSS module. This forces the system to load the attacker\u0027s controlled NSS Module and configuration, allowing them to execute arbitrary commands as the root user, elevating their privileges and fully compromising the system."
}
],
"metrics": [
{
"other": {
"content": {
"namespace": "https://access.redhat.com/security/updates/classification/",
"value": "Important"
},
"type": "Red Hat severity rating"
}
},
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 7.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-250",
"description": "Execution with Unnecessary Privileges",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-24T13:01:14.196Z",
"orgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
"shortName": "redhat"
},
"references": [
{
"name": "RHSA-2026:32990",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:32990"
},
{
"name": "RHSA-2026:39575",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:39575"
},
{
"name": "RHSA-2026:39576",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:39576"
},
{
"name": "RHSA-2026:44232",
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:44232"
},
{
"tags": [
"vdb-entry",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/security/cve/CVE-2026-12505"
},
{
"name": "RHBZ#2489805",
"tags": [
"issue-tracking",
"x_refsource_REDHAT"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=2489805"
},
{
"url": "https://git.samba.org/?p=cifs-utils.git;a=commit;h=972c5b5ff95e3e812bc8daa72d0383654ab0dba7"
}
],
"timeline": [
{
"lang": "en",
"time": "2026-06-17T00:00:00.000Z",
"value": "Reported to Red Hat."
},
{
"lang": "en",
"time": "2026-06-16T00:00:00.000Z",
"value": "Made public."
}
],
"title": "Cifs-utils: local privilege escalation via forged cifs.spnego key description in cifs.upcall",
"workarounds": [
{
"lang": "en",
"value": "Red Hat is not aware of a practical temporary workaround that fully mitigates this issue or meets Red Hat Product Security\u0027s standards for usability, deployment, applicability, or stability. Customers are advised to apply the relevant security updates when they become available."
}
],
"x_generator": {
"engine": "cvelib 1.8.0"
},
"x_redhatCweChain": "CWE-250: Execution with Unnecessary Privileges"
}
},
"cveMetadata": {
"assignerOrgId": "53f830b8-0a3f-465b-8143-3b8a9948e749",
"assignerShortName": "redhat",
"cveId": "CVE-2026-12505",
"datePublished": "2026-06-18T03:34:22.719Z",
"dateReserved": "2026-06-17T10:15:14.786Z",
"dateUpdated": "2026-08-25T12:05:40.874Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-43279 (GCVE-0-2026-43279)
Vulnerability from cvelistv5
Published
2026-05-06 11:29
Modified
2026-08-05 12:27
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Add sanity check for OOB writes at silencing
At silencing the playback URB packets in the implicit fb mode before
the actual playback, we blindly assume that the received packets fit
with the buffer size. But when the setup in the capture stream
differs from the playback stream (e.g. due to the USB core limitation
of max packet size), such an inconsistency may lead to OOB writes to
the buffer, resulting in a crash.
For addressing it, add a sanity check of the transfer buffer size at
prepare_silent_urb(), and stop the data copy if the received data
overflows. Also, report back the transfer error properly from there,
too.
Note that this doesn't fix the root cause of the playback error
itself, but this merely covers the kernel Oops.
References
| URL | Tags | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|||||||||||||||||||||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Linux | Linux |
Version: c75a8a7ae565d7cd9baa87a504ba9162e355b4b0 Version: c75a8a7ae565d7cd9baa87a504ba9162e355b4b0 Version: c75a8a7ae565d7cd9baa87a504ba9162e355b4b0 Version: c75a8a7ae565d7cd9baa87a504ba9162e355b4b0 Version: c75a8a7ae565d7cd9baa87a504ba9162e355b4b0 Version: c75a8a7ae565d7cd9baa87a504ba9162e355b4b0 Version: c75a8a7ae565d7cd9baa87a504ba9162e355b4b0 |
||
{
"containers": {
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"sound/usb/endpoint.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "fa01973bb79d70c4736b6a4b2de99fbb2cbc8d1f",
"status": "affected",
"version": "c75a8a7ae565d7cd9baa87a504ba9162e355b4b0",
"versionType": "git"
},
{
"lessThan": "780dc57794a217b49994fa1d0b42465fb10a00aa",
"status": "affected",
"version": "c75a8a7ae565d7cd9baa87a504ba9162e355b4b0",
"versionType": "git"
},
{
"lessThan": "8995fc0e00b3fee9bf7ecb3d836b635b730c1049",
"status": "affected",
"version": "c75a8a7ae565d7cd9baa87a504ba9162e355b4b0",
"versionType": "git"
},
{
"lessThan": "fc9e5af60dc199051dc202ae78e1fe76a9977a5e",
"status": "affected",
"version": "c75a8a7ae565d7cd9baa87a504ba9162e355b4b0",
"versionType": "git"
},
{
"lessThan": "6af16f1b8649df4c00d6ced924bdd8b72c885b6a",
"status": "affected",
"version": "c75a8a7ae565d7cd9baa87a504ba9162e355b4b0",
"versionType": "git"
},
{
"lessThan": "ccaf9296763be4f76b59e2cac377006016c34435",
"status": "affected",
"version": "c75a8a7ae565d7cd9baa87a504ba9162e355b4b0",
"versionType": "git"
},
{
"lessThan": "fba2105a157fffcf19825e4eea498346738c9948",
"status": "affected",
"version": "c75a8a7ae565d7cd9baa87a504ba9162e355b4b0",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"sound/usb/endpoint.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "3.5"
},
{
"lessThan": "3.5",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.202",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.165",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.128",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.75",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.16",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.19.*",
"status": "unaffected",
"version": "6.19.6",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.0",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.202",
"versionStartIncluding": "3.5",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.165",
"versionStartIncluding": "3.5",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.128",
"versionStartIncluding": "3.5",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.75",
"versionStartIncluding": "3.5",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.16",
"versionStartIncluding": "3.5",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.19.6",
"versionStartIncluding": "3.5",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0",
"versionStartIncluding": "3.5",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nALSA: usb-audio: Add sanity check for OOB writes at silencing\n\nAt silencing the playback URB packets in the implicit fb mode before\nthe actual playback, we blindly assume that the received packets fit\nwith the buffer size. But when the setup in the capture stream\ndiffers from the playback stream (e.g. due to the USB core limitation\nof max packet size), such an inconsistency may lead to OOB writes to\nthe buffer, resulting in a crash.\n\nFor addressing it, add a sanity check of the transfer buffer size at\nprepare_silent_urb(), and stop the data copy if the received data\noverflows. Also, report back the transfer error properly from there,\ntoo.\n\nNote that this doesn\u0027t fix the root cause of the playback error\nitself, but this merely covers the kernel Oops."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 7.8,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:L - The vulnerable path is exercised through local ALSA PCM device-file operations such as open, hw_params, prepare, and trigger/write on a USB audio PCM device. It is not network reachable, but a local user can drive the stream path once a susceptible USB audio device is present.\nAC:L - There is no race or hard-to-hit timing condition; the overflow follows deterministically when implicit-feedback packet sizes exceed the playback URB buffer. A malicious or affected device plus chosen stream parameters can repeatedly drive the bad packet-size path.\nPR:L - The ALSA PCM path does not require CAP_SYS_ADMIN or another kernel capability, only permission to access the relevant /dev/snd PCM node as a normal local audio user/session. User namespaces are not needed.\nUI:N - A local attacker with PCM device access can open, configure, and start the stream directly. No separate victim action is required for that local attack path.\nS:U - The corruption occurs within the host kernel USB audio/ALSA subsystem and impacts the same kernel security authority. It is not a VM escape, IOMMU bypass, or cross-scope boundary violation.\nC:H - The bug is an out-of-bounds write into kernel USB transfer-buffer memory, which is kernel memory corruption. Even though the reported symptom is an oops, such corruption can plausibly be leveraged for information disclosure.\nI:H - The vulnerable code writes past the allocated URB transfer buffer while preparing silent playback packets. Out-of-bounds kernel writes are high-integrity impact because they can corrupt adjacent kernel state and potentially enable control-flow or data modification.\nA:H - The commit explicitly describes resulting kernel oops/crash behavior, and the fix only bounds the write to prevent that crash. The trigger can be repeated by starting the affected stream again."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-05T12:27:01.240Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/fa01973bb79d70c4736b6a4b2de99fbb2cbc8d1f"
},
{
"url": "https://git.kernel.org/stable/c/780dc57794a217b49994fa1d0b42465fb10a00aa"
},
{
"url": "https://git.kernel.org/stable/c/8995fc0e00b3fee9bf7ecb3d836b635b730c1049"
},
{
"url": "https://git.kernel.org/stable/c/fc9e5af60dc199051dc202ae78e1fe76a9977a5e"
},
{
"url": "https://git.kernel.org/stable/c/6af16f1b8649df4c00d6ced924bdd8b72c885b6a"
},
{
"url": "https://git.kernel.org/stable/c/ccaf9296763be4f76b59e2cac377006016c34435"
},
{
"url": "https://git.kernel.org/stable/c/fba2105a157fffcf19825e4eea498346738c9948"
}
],
"title": "ALSA: usb-audio: Add sanity check for OOB writes at silencing",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-43279",
"datePublished": "2026-05-06T11:29:00.844Z",
"dateReserved": "2026-05-01T14:12:55.998Z",
"dateUpdated": "2026-08-05T12:27:01.240Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-46189 (GCVE-0-2026-46189)
Vulnerability from cvelistv5
Published
2026-05-28 09:36
Modified
2026-07-30 12:04
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
RDMA/vmw_pvrdma: Fix double free on pvrdma_alloc_ucontext() error path
Sashiko points out that pvrdma_uar_free() is already called within
pvrdma_dealloc_ucontext(), so calling it before triggers a double free.
References
| URL | Tags | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Linux | Linux |
Version: 29c8d9eba550c6d73d17cc1618a9f5f2a7345aa1 Version: 29c8d9eba550c6d73d17cc1618a9f5f2a7345aa1 Version: 29c8d9eba550c6d73d17cc1618a9f5f2a7345aa1 Version: 29c8d9eba550c6d73d17cc1618a9f5f2a7345aa1 Version: 29c8d9eba550c6d73d17cc1618a9f5f2a7345aa1 Version: 29c8d9eba550c6d73d17cc1618a9f5f2a7345aa1 Version: 29c8d9eba550c6d73d17cc1618a9f5f2a7345aa1 Version: 29c8d9eba550c6d73d17cc1618a9f5f2a7345aa1 |
||
{
"containers": {
"adp": [
{
"affected": [
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:10.2"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 10",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:6.12.0-211.29.1.el10_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:8::nfv"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-553.139.1.rt7.480.el8_10",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:8"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-553.139.1.el8_10",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_aus:8.4"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.4 Advanced Mission Critical Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-305.199.1.el8_4",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_eus_long_life:8.4"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.4 Extended Update Support Long-Life Add-On",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-305.199.1.el8_4",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_aus:8.6"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.6 Advanced Mission Critical Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-372.201.1.el8_6",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_eus_long_life:8.6"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.6 Extended Update Support Long-Life Add-On",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-372.201.1.el8_6",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_tus:8.8"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.8 Telecommunications Update Service",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-477.152.1.el8_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_e4s:8.8"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.8 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-477.152.1.el8_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:9",
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-687.19.1.el9_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_e4s:9.2"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9.2 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-284.179.1.el9_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_e4s:9.2::nfv"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 9.2 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-284.179.1.rt14.464.el9_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_e4s:9.4"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9.4 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-427.136.1.el9_4",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_eus:9.6"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9.6 Extended Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-570.127.1.el9_6",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:6"
],
"defaultStatus": "unaffected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 6",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat"
}
],
"datePublic": "2026-05-28T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A flaw was found in the Linux kernel, specifically within the RDMA (Remote Direct Memory Access) vmw_pvrdma module. This vulnerability is a double free, which means the system attempts to release the same memory resource twice. This can occur in an error handling path within the `pvrdma_alloc_ucontext()` function. Exploiting this flaw could lead to memory corruption or cause the system to become unavailable, resulting in a denial of service (DoS)."
}
],
"metrics": [
{
"other": {
"content": {
"namespace": "https://access.redhat.com/security/updates/classification/",
"value": "Important"
},
"type": "Red Hat severity rating"
}
},
{
"cvssV3_1": {
"attackComplexity": "HIGH",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 7,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-1341",
"description": "Multiple Releases of Same Resource or Handle",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-30T12:04:54.139Z",
"orgId": "0b0ca135-0b70-47e7-9f44-1890c2a1c46c",
"shortName": "redhat-SADP"
},
"references": [
{
"tags": [
"vdb-entry",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/security/cve/CVE-2026-46189"
},
{
"name": "RHBZ#2482588",
"tags": [
"issue-tracking",
"x_refsource_REDHAT"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=2482588"
},
{
"tags": [
"x_sadp-csaf-vex"
],
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-46189.json"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:33685"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:36073"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:36767"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:38902"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:30848"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:33743"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:47633"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:40068"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:40760"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:36049"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:35904"
}
],
"solutions": [
{
"lang": "en",
"value": "RHSA-2026:33685: Red Hat Enterprise Linux AppStream (v. 10), Red Hat Enterprise Linux BaseOS (v. 10), Red Hat Enterprise Linux CodeReady Linux Builder (v. 10), Red Hat Enterprise Linux Real Time (v. 10), Red Hat Enterprise Linux Real Time for NFV (v. 10)"
},
{
"lang": "en",
"value": "RHSA-2026:36073: Red Hat Enterprise Linux AppStream E4S (v.9.2), Red Hat Enterprise Linux BaseOS E4S (v.9.2)"
},
{
"lang": "en",
"value": "RHSA-2026:36767: Red Hat Enterprise Linux AppStream E4S (v.9.4), Red Hat Enterprise Linux BaseOS E4S (v.9.4), Red Hat Enterprise Linux Real Time E4S (v.9.4), Red Hat Enterprise Linux Real Time for NFV E4S (v.9.4)"
},
{
"lang": "en",
"value": "RHSA-2026:38902: Red Hat CodeReady Linux Builder EUS (v.9.6), Red Hat Enterprise Linux AppStream EUS (v.9.6), Red Hat Enterprise Linux BaseOS EUS (v.9.6), Red Hat Enterprise Linux Real Time EUS (v.9.6), Red Hat Enterprise Linux Real Time for NFV EUS (v.9.6)"
},
{
"lang": "en",
"value": "RHSA-2026:30848: Red Hat Enterprise Linux AppStream (v. 9), Red Hat Enterprise Linux BaseOS (v. 9), Red Hat Enterprise Linux CodeReady Linux Builder (v. 9), Red Hat Enterprise Linux Real Time (v. 9), Red Hat Enterprise Linux Real Time for NFV (v. 9)"
},
{
"lang": "en",
"value": "RHSA-2026:33743: Red Hat Enterprise Linux BaseOS (v. 8), Red Hat Enterprise Linux CRB (v. 8)"
},
{
"lang": "en",
"value": "RHSA-2026:47633: Red Hat Enterprise Linux BaseOS AUS (v.8.4), Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.4)"
},
{
"lang": "en",
"value": "RHSA-2026:40068: Red Hat Enterprise Linux BaseOS AUS (v.8.6), Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.6)"
},
{
"lang": "en",
"value": "RHSA-2026:40760: Red Hat Enterprise Linux BaseOS E4S (v.8.8), Red Hat Enterprise Linux BaseOS TUS (v.8.8)"
},
{
"lang": "en",
"value": "RHSA-2026:36049: Red Hat Enterprise Linux NFV (v. 8), Red Hat Enterprise Linux RT (v. 8)"
},
{
"lang": "en",
"value": "RHSA-2026:35904: Red Hat Enterprise Linux Real Time E4S (v.9.2), Red Hat Enterprise Linux Real Time for NFV E4S (v.9.2)"
}
],
"timeline": [
{
"lang": "en",
"time": "2026-05-28T00:00:00.000Z",
"value": "Reported to Red Hat."
},
{
"lang": "en",
"time": "2026-05-28T00:00:00.000Z",
"value": "Made public."
}
],
"title": "kernel: RDMA/vmw_pvrdma: Fix double free on pvrdma_alloc_ucontext() error path",
"x_adpType": "supplier",
"x_generator": {
"engine": "sadp-cli 1.0.0"
}
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "269967d7693304e1f06ed2dff4ebbbeeb397cda4",
"status": "affected",
"version": "29c8d9eba550c6d73d17cc1618a9f5f2a7345aa1",
"versionType": "git"
},
{
"lessThan": "1df5711121cdc11e76b889408fdbe459feba1d39",
"status": "affected",
"version": "29c8d9eba550c6d73d17cc1618a9f5f2a7345aa1",
"versionType": "git"
},
{
"lessThan": "3a231c34c5bc3d3cfc850b877758ec9fdaa8a483",
"status": "affected",
"version": "29c8d9eba550c6d73d17cc1618a9f5f2a7345aa1",
"versionType": "git"
},
{
"lessThan": "ecc36a82ecfcfdf3c6606d209f22ec5543c410e0",
"status": "affected",
"version": "29c8d9eba550c6d73d17cc1618a9f5f2a7345aa1",
"versionType": "git"
},
{
"lessThan": "45d25e3ec17900bf5a9d6876ff16ceee31c4c0e0",
"status": "affected",
"version": "29c8d9eba550c6d73d17cc1618a9f5f2a7345aa1",
"versionType": "git"
},
{
"lessThan": "0c63333ff97bd1275294fd12840a0efe9d7a4c59",
"status": "affected",
"version": "29c8d9eba550c6d73d17cc1618a9f5f2a7345aa1",
"versionType": "git"
},
{
"lessThan": "935ee27d0904aa944cbcc979094c20e5ef62eead",
"status": "affected",
"version": "29c8d9eba550c6d73d17cc1618a9f5f2a7345aa1",
"versionType": "git"
},
{
"lessThan": "e38e86995df27f1f854063dab1f0c6a513db3faf",
"status": "affected",
"version": "29c8d9eba550c6d73d17cc1618a9f5f2a7345aa1",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "4.10"
},
{
"lessThan": "4.10",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.258",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.209",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.175",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.140",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.88",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.30",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.0.*",
"status": "unaffected",
"version": "7.0.7",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.1",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.258",
"versionStartIncluding": "4.10",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.209",
"versionStartIncluding": "4.10",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.175",
"versionStartIncluding": "4.10",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.140",
"versionStartIncluding": "4.10",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.88",
"versionStartIncluding": "4.10",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.30",
"versionStartIncluding": "4.10",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0.7",
"versionStartIncluding": "4.10",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.1",
"versionStartIncluding": "4.10",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nRDMA/vmw_pvrdma: Fix double free on pvrdma_alloc_ucontext() error path\n\nSashiko points out that pvrdma_uar_free() is already called within\npvrdma_dealloc_ucontext(), so calling it before triggers a double free."
}
],
"providerMetadata": {
"dateUpdated": "2026-06-14T18:01:23.441Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/269967d7693304e1f06ed2dff4ebbbeeb397cda4"
},
{
"url": "https://git.kernel.org/stable/c/1df5711121cdc11e76b889408fdbe459feba1d39"
},
{
"url": "https://git.kernel.org/stable/c/3a231c34c5bc3d3cfc850b877758ec9fdaa8a483"
},
{
"url": "https://git.kernel.org/stable/c/ecc36a82ecfcfdf3c6606d209f22ec5543c410e0"
},
{
"url": "https://git.kernel.org/stable/c/45d25e3ec17900bf5a9d6876ff16ceee31c4c0e0"
},
{
"url": "https://git.kernel.org/stable/c/0c63333ff97bd1275294fd12840a0efe9d7a4c59"
},
{
"url": "https://git.kernel.org/stable/c/935ee27d0904aa944cbcc979094c20e5ef62eead"
},
{
"url": "https://git.kernel.org/stable/c/e38e86995df27f1f854063dab1f0c6a513db3faf"
}
],
"title": "RDMA/vmw_pvrdma: Fix double free on pvrdma_alloc_ucontext() error path",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-46189",
"datePublished": "2026-05-28T09:36:43.205Z",
"dateReserved": "2026-05-13T15:03:33.104Z",
"dateUpdated": "2026-07-30T12:04:54.139Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2025-38085 (GCVE-0-2025-38085)
Vulnerability from cvelistv5
Published
2025-06-28 07:44
Modified
2026-08-05 11:59
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix huge_pmd_unshare() vs GUP-fast race
huge_pmd_unshare() drops a reference on a page table that may have
previously been shared across processes, potentially turning it into a
normal page table used in another process in which unrelated VMAs can
afterwards be installed.
If this happens in the middle of a concurrent gup_fast(), gup_fast() could
end up walking the page tables of another process. While I don't see any
way in which that immediately leads to kernel memory corruption, it is
really weird and unexpected.
Fix it with an explicit broadcast IPI through tlb_remove_table_sync_one(),
just like we do in khugepaged when removing page tables for a THP
collapse.
References
| URL | Tags | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Linux | Linux |
Version: 39dde65c9940c97fcd178a3d2b1c57ed8b7b68aa Version: 39dde65c9940c97fcd178a3d2b1c57ed8b7b68aa Version: 39dde65c9940c97fcd178a3d2b1c57ed8b7b68aa Version: 39dde65c9940c97fcd178a3d2b1c57ed8b7b68aa Version: 39dde65c9940c97fcd178a3d2b1c57ed8b7b68aa Version: 39dde65c9940c97fcd178a3d2b1c57ed8b7b68aa Version: 39dde65c9940c97fcd178a3d2b1c57ed8b7b68aa |
||
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2025-11-03T17:33:54.315Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "https://lists.debian.org/debian-lts-announce/2025/10/msg00008.html"
},
{
"url": "https://lists.debian.org/debian-lts-announce/2025/10/msg00007.html"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2025-38085",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-06-10T20:41:29.670838Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-06-11T18:44:12.999Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"mm/hugetlb.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "952596b08c74e8fe9e2883d1dc8a8f54a37384ec",
"status": "affected",
"version": "39dde65c9940c97fcd178a3d2b1c57ed8b7b68aa",
"versionType": "git"
},
{
"lessThan": "a3d864c901a300c295692d129159fc3001a56185",
"status": "affected",
"version": "39dde65c9940c97fcd178a3d2b1c57ed8b7b68aa",
"versionType": "git"
},
{
"lessThan": "b7754d3aa7bf9f62218d096c0c8f6c13698fac8b",
"status": "affected",
"version": "39dde65c9940c97fcd178a3d2b1c57ed8b7b68aa",
"versionType": "git"
},
{
"lessThan": "fe684290418ef9ef76630072086ee530b92f02b8",
"status": "affected",
"version": "39dde65c9940c97fcd178a3d2b1c57ed8b7b68aa",
"versionType": "git"
},
{
"lessThan": "034a52b5ef57c9c8225d94e9067f3390bb33922f",
"status": "affected",
"version": "39dde65c9940c97fcd178a3d2b1c57ed8b7b68aa",
"versionType": "git"
},
{
"lessThan": "a6bfeb97941a9187833b526bc6cc4ff5706d0ce9",
"status": "affected",
"version": "39dde65c9940c97fcd178a3d2b1c57ed8b7b68aa",
"versionType": "git"
},
{
"lessThan": "1013af4f585fccc4d3e5c5824d174de2257f7d6d",
"status": "affected",
"version": "39dde65c9940c97fcd178a3d2b1c57ed8b7b68aa",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"mm/hugetlb.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "2.6.20"
},
{
"lessThan": "2.6.20",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.239",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.186",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.142",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.95",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.35",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.15.*",
"status": "unaffected",
"version": "6.15.4",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "6.16",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.239",
"versionStartIncluding": "2.6.20",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.186",
"versionStartIncluding": "2.6.20",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.142",
"versionStartIncluding": "2.6.20",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.95",
"versionStartIncluding": "2.6.20",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.35",
"versionStartIncluding": "2.6.20",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.15.4",
"versionStartIncluding": "2.6.20",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.16",
"versionStartIncluding": "2.6.20",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nmm/hugetlb: fix huge_pmd_unshare() vs GUP-fast race\n\nhuge_pmd_unshare() drops a reference on a page table that may have\npreviously been shared across processes, potentially turning it into a\nnormal page table used in another process in which unrelated VMAs can\nafterwards be installed.\n\nIf this happens in the middle of a concurrent gup_fast(), gup_fast() could\nend up walking the page tables of another process. While I don\u0027t see any\nway in which that immediately leads to kernel memory corruption, it is\nreally weird and unexpected.\n\nFix it with an explicit broadcast IPI through tlb_remove_table_sync_one(),\njust like we do in khugepaged when removing page tables for a THP\ncollapse."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 7.8,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:L - The race is driven entirely through local syscalls \u2014 a PUD-aligned MAP_SHARED hugetlbfs/MAP_HUGETLB mapping plus munmap/mremap/mprotect/fallocate to trigger huge_pmd_unshare(), raced against gup_fast() reached via O_DIRECT, io_uring registered buffers or vmsplice. There is no network-facing path into mm/hugetlb.c.\nAC:L - The attacker controls every participant: one thread issues the GUP-fast pin, a sibling thread issues the unmap that calls huge_pmd_unshare(), and a second attacker process reuses the now-exclusively-owned PMD table, and the whole sequence can be looped indefinitely. The gup_fast() IRQ-disabled window can additionally be widened by requesting a full PUD-sized pin range, since the PUD is latched once at the start of gup_fast_pud_range() while the PMD loop then walks 512 entries.\nPR:L - hugetlb_file_setup() performs no capable() check for MAP_HUGETLB anonymous mappings, and none of huge_pmd_unshare()\u0027s callers or the GUP-fast entry points require any capability, so an ordinary local user account suffices. Only a configured hugepage pool is needed, which is standard on cloud, virtualization, DPDK and database hosts.\nUI:N - Exploitation is fully self-contained \u2014 the attacker forks its own second process to establish PMD sharing and to repurpose the unshared page table. No victim action is required at any point.\nS:U - The defect and its impact are both within the kernel\u0027s own memory-management security authority, with no VM, IOMMU or sandbox boundary crossed. This is a standard kernel memory-safety/privilege-escalation shape, so scope remains Unchanged.\nC:H - A gup_fast() walker that latched the stale PUD proceeds to walk a PMD table that now backs a different process\u0027s address space, pinning and returning struct pages that belong to that other mm. Handing those pages to O_DIRECT or vmsplice yields a direct read primitive against another process\u0027s memory, which on hosts where a hugetlbfs segment is shared across trust boundaries (QEMU/vhost-user, DPDK/SPDK, shared DB segments) discloses privileged data.\nI:H - The same stale walk with FOLL_WRITE returns writable pins on pages mapped by the foreign address space, so an O_DIRECT read or io_uring write into that buffer modifies another process\u0027s memory arbitrarily. It also leaves DMA pins and page reference/mapcount state established behind the back of the owning mm, corrupting page-table and pinning invariants the kernel relies on.\nA:H - GUP-fast traversing page tables of an unrelated address space while that process is concurrently tearing down and re-populating them is exactly the unsynchronized page-table access the kernel elsewhere prevents with tlb_remove_table_sync_one(), and it readily produces inconsistent refcount/mapcount state, VM_WARN/BUG trips, and oops in mm paths. The race can be re-armed in a loop by an unprivileged process."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-05T11:59:23.457Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/952596b08c74e8fe9e2883d1dc8a8f54a37384ec"
},
{
"url": "https://git.kernel.org/stable/c/a3d864c901a300c295692d129159fc3001a56185"
},
{
"url": "https://git.kernel.org/stable/c/b7754d3aa7bf9f62218d096c0c8f6c13698fac8b"
},
{
"url": "https://git.kernel.org/stable/c/fe684290418ef9ef76630072086ee530b92f02b8"
},
{
"url": "https://git.kernel.org/stable/c/034a52b5ef57c9c8225d94e9067f3390bb33922f"
},
{
"url": "https://git.kernel.org/stable/c/a6bfeb97941a9187833b526bc6cc4ff5706d0ce9"
},
{
"url": "https://git.kernel.org/stable/c/1013af4f585fccc4d3e5c5824d174de2257f7d6d"
},
{
"url": "https://project-zero.issues.chromium.org/issues/420715744"
}
],
"title": "mm/hugetlb: fix huge_pmd_unshare() vs GUP-fast race",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2025-38085",
"datePublished": "2025-06-28T07:44:26.178Z",
"dateReserved": "2025-04-16T04:51:23.981Z",
"dateUpdated": "2026-08-05T11:59:23.457Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-31613 (GCVE-0-2026-31613)
Vulnerability from cvelistv5
Published
2026-04-24 14:42
Modified
2026-08-05 12:23
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix OOB reads parsing symlink error response
When a CREATE returns STATUS_STOPPED_ON_SYMLINK, smb2_check_message()
returns success without any length validation, leaving the symlink
parsers as the only defense against an untrusted server.
symlink_data() walks SMB 3.1.1 error contexts with the loop test "p <
end", but reads p->ErrorId at offset 4 and p->ErrorDataLength at offset
0. When the server-controlled ErrorDataLength advances p to within 1-7
bytes of end, the next iteration will read past it. When the matching
context is found, sym->SymLinkErrorTag is read at offset 4 from
p->ErrorContextData with no check that the symlink header itself fits.
smb2_parse_symlink_response() then bounds-checks the substitute name
using SMB2_SYMLINK_STRUCT_SIZE as the offset of PathBuffer from
iov_base. That value is computed as sizeof(smb2_err_rsp) +
sizeof(smb2_symlink_err_rsp), which is correct only when
ErrorContextCount == 0.
With at least one error context the symlink data sits 8 bytes deeper,
and each skipped non-matching context shifts it further by 8 +
ALIGN(ErrorDataLength, 8). The check is too short, allowing the
substitute name read to run past iov_len. The out-of-bound heap bytes
are UTF-16-decoded into the symlink target and returned to userspace via
readlink(2).
Fix this all up by making the loops test require the full context header
to fit, rejecting sym if its header runs past end, and bound the
substitute name against the actual position of sym->PathBuffer rather
than a fixed offset.
Because sub_offs and sub_len are 16bits, the pointer math will not
overflow here with the new greater-than.
References
| URL | Tags | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|||||||||||||||||||||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Linux | Linux |
Version: 76894f3e2f71177747b8b4763fb180e800279585 Version: 76894f3e2f71177747b8b4763fb180e800279585 Version: 76894f3e2f71177747b8b4763fb180e800279585 Version: 76894f3e2f71177747b8b4763fb180e800279585 Version: 76894f3e2f71177747b8b4763fb180e800279585 Version: 76894f3e2f71177747b8b4763fb180e800279585 Version: 76894f3e2f71177747b8b4763fb180e800279585 Version: 2d046892a493d9760c35fdaefc3017f27f91b621 Version: 6.0.16 ≤ |
||
{
"containers": {
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"fs/smb/client/smb2file.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "043834e72337ee7b4e9685859888623ba1504ac7",
"status": "affected",
"version": "76894f3e2f71177747b8b4763fb180e800279585",
"versionType": "git"
},
{
"lessThan": "d65a64755a3df68a2fd19d2a81395e9f723aca23",
"status": "affected",
"version": "76894f3e2f71177747b8b4763fb180e800279585",
"versionType": "git"
},
{
"lessThan": "20ac98f0eb6047edb73c9a27af782bdde08b3757",
"status": "affected",
"version": "76894f3e2f71177747b8b4763fb180e800279585",
"versionType": "git"
},
{
"lessThan": "e0dd90d14cbbf318157ea8e3fb62ee68a28655ed",
"status": "affected",
"version": "76894f3e2f71177747b8b4763fb180e800279585",
"versionType": "git"
},
{
"lessThan": "781902e069f4ecb6c3b83502f181972c1446110a",
"status": "affected",
"version": "76894f3e2f71177747b8b4763fb180e800279585",
"versionType": "git"
},
{
"lessThan": "a66ef2e7ed837325c5600f8617d5ee0a0a149fdd",
"status": "affected",
"version": "76894f3e2f71177747b8b4763fb180e800279585",
"versionType": "git"
},
{
"lessThan": "3df690bba28edec865cf7190be10708ad0ddd67e",
"status": "affected",
"version": "76894f3e2f71177747b8b4763fb180e800279585",
"versionType": "git"
},
{
"status": "affected",
"version": "2d046892a493d9760c35fdaefc3017f27f91b621",
"versionType": "git"
},
{
"lessThan": "6.1",
"status": "affected",
"version": "6.0.16",
"versionType": "semver"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"fs/smb/client/smb2file.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "6.1"
},
{
"lessThan": "6.1",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.175",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.141",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.91",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.24",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.19.*",
"status": "unaffected",
"version": "6.19.14",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.0.*",
"status": "unaffected",
"version": "7.0.1",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.1",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.175",
"versionStartIncluding": "6.1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.141",
"versionStartIncluding": "6.1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.91",
"versionStartIncluding": "6.1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.24",
"versionStartIncluding": "6.1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.19.14",
"versionStartIncluding": "6.1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0.1",
"versionStartIncluding": "6.1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.1",
"versionStartIncluding": "6.1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "6.0.16",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nsmb: client: fix OOB reads parsing symlink error response\n\nWhen a CREATE returns STATUS_STOPPED_ON_SYMLINK, smb2_check_message()\nreturns success without any length validation, leaving the symlink\nparsers as the only defense against an untrusted server.\n\nsymlink_data() walks SMB 3.1.1 error contexts with the loop test \"p \u003c\nend\", but reads p-\u003eErrorId at offset 4 and p-\u003eErrorDataLength at offset\n0. When the server-controlled ErrorDataLength advances p to within 1-7\nbytes of end, the next iteration will read past it. When the matching\ncontext is found, sym-\u003eSymLinkErrorTag is read at offset 4 from\np-\u003eErrorContextData with no check that the symlink header itself fits.\n\nsmb2_parse_symlink_response() then bounds-checks the substitute name\nusing SMB2_SYMLINK_STRUCT_SIZE as the offset of PathBuffer from\niov_base. That value is computed as sizeof(smb2_err_rsp) +\nsizeof(smb2_symlink_err_rsp), which is correct only when\nErrorContextCount == 0.\n\nWith at least one error context the symlink data sits 8 bytes deeper,\nand each skipped non-matching context shifts it further by 8 +\nALIGN(ErrorDataLength, 8). The check is too short, allowing the\nsubstitute name read to run past iov_len. The out-of-bound heap bytes\nare UTF-16-decoded into the symlink target and returned to userspace via\nreadlink(2).\n\nFix this all up by making the loops test require the full context header\nto fit, rejecting sym if its header runs past end, and bound the\nsubstitute name against the actual position of sym-\u003ePathBuffer rather\nthan a fixed offset.\n\nBecause sub_offs and sub_len are 16bits, the pointer math will not\noverflow here with the new greater-than."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 8.1,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:N/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:N - The crafted data is delivered over SMB by a remote SMB server in response to client CREATE/path-info operations. A malicious server can trigger the parser once the victim connects to or uses the share.\nAC:L - The attacker controls the relevant SMB error context fields, offsets, and lengths in a single response. No race or condition outside attacker control is required.\nPR:N - The attacker needs no privileges on the victim system; they only need to operate or impersonate the SMB server endpoint. SMB session setup is victim-side interaction, not attacker privilege.\nUI:R - A victim must mount/connect to the SMB share or access a path on an already-mounted share. The server cannot trigger the vulnerable client path without such client activity.\nS:U - The bug affects the kernel SMB client and exposes or disrupts resources within the same client security authority. It does not cross a VM, IOMMU, or sandbox boundary.\nC:H - The malformed symlink error response can make kernel heap bytes past the received SMB buffer get UTF-16 decoded into the symlink target and returned to userspace. The over-read is not strictly limited to only a few bytes in the error-context case.\nI:N - The bug is an out-of-bounds read, not a write or control-flow primitive. The malicious server already controls symlink response contents, so this adds disclosure and possible crash impact rather than data modification.\nA:H - The unchecked over-read occurs in kernel parsing/conversion paths and can read beyond the allocated receive buffer, which can fault or oops the kernel. A malicious server can also repeatedly trigger the malformed response when the client accesses the path."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-05T12:23:51.182Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/043834e72337ee7b4e9685859888623ba1504ac7"
},
{
"url": "https://git.kernel.org/stable/c/d65a64755a3df68a2fd19d2a81395e9f723aca23"
},
{
"url": "https://git.kernel.org/stable/c/20ac98f0eb6047edb73c9a27af782bdde08b3757"
},
{
"url": "https://git.kernel.org/stable/c/e0dd90d14cbbf318157ea8e3fb62ee68a28655ed"
},
{
"url": "https://git.kernel.org/stable/c/781902e069f4ecb6c3b83502f181972c1446110a"
},
{
"url": "https://git.kernel.org/stable/c/a66ef2e7ed837325c5600f8617d5ee0a0a149fdd"
},
{
"url": "https://git.kernel.org/stable/c/3df690bba28edec865cf7190be10708ad0ddd67e"
}
],
"title": "smb: client: fix OOB reads parsing symlink error response",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-31613",
"datePublished": "2026-04-24T14:42:33.453Z",
"dateReserved": "2026-03-09T15:48:24.123Z",
"dateUpdated": "2026-08-05T12:23:51.182Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-46209 (GCVE-0-2026-46209)
Vulnerability from cvelistv5
Published
2026-05-28 09:40
Modified
2026-08-05 12:30
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
drm/gem: Fix inconsistent plane dimension calculation in drm_gem_fb_init_with_funcs()
drm_gem_fb_init_with_funcs() computes sub-sampled plane dimensions
using plain integer division:
unsigned int width = mode_cmd->width / (i ? info->hsub : 1);
unsigned int height = mode_cmd->height / (i ? info->vsub : 1);
However, the ioctl-level framebuffer_check() in drm_framebuffer.c uses
drm_format_info_plane_width/height() which round up dimensions via
DIV_ROUND_UP(). This inconsistency corrupts the subsequent GEM object
size check for certain pixel format and dimension combinations.
For example, with NV12 (vsub=2) and a 1-pixel-tall framebuffer the
GEM size validation path sees height=0 instead of height=1. The
expression (height - 1) then wraps to UINT_MAX as an unsigned int,
causing min_size to overflow and wrap back to a small value. A tiny
GEM object therefore passes the size guard, yet when the GPU accesses
the chroma plane it will read or write memory beyond the object's
bounds.
Fix by replacing the open-coded divisions with drm_format_info_plane_width()
and drm_format_info_plane_height(), which use DIV_ROUND_UP() and match
the calculation already used in framebuffer_check().
References
| URL | Tags | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Linux | Linux |
Version: 4c3dbb2c312c9fafbac30d98c523b8b1f3455d78 Version: 4c3dbb2c312c9fafbac30d98c523b8b1f3455d78 Version: 4c3dbb2c312c9fafbac30d98c523b8b1f3455d78 Version: 4c3dbb2c312c9fafbac30d98c523b8b1f3455d78 Version: 4c3dbb2c312c9fafbac30d98c523b8b1f3455d78 Version: 4c3dbb2c312c9fafbac30d98c523b8b1f3455d78 Version: 4c3dbb2c312c9fafbac30d98c523b8b1f3455d78 Version: 4c3dbb2c312c9fafbac30d98c523b8b1f3455d78 |
||
{
"containers": {
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/gpu/drm/drm_gem_framebuffer_helper.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "11427ad6c9f0def5ce567982b785da3191946430",
"status": "affected",
"version": "4c3dbb2c312c9fafbac30d98c523b8b1f3455d78",
"versionType": "git"
},
{
"lessThan": "adfc5ba4ef4dd2bca5969f40e8fc7b41fb3902ad",
"status": "affected",
"version": "4c3dbb2c312c9fafbac30d98c523b8b1f3455d78",
"versionType": "git"
},
{
"lessThan": "22922f7dae74409fc4bf0f1142710cb6b8ce8cc2",
"status": "affected",
"version": "4c3dbb2c312c9fafbac30d98c523b8b1f3455d78",
"versionType": "git"
},
{
"lessThan": "6b992591e04f2cce813bcf239b354f375bbf84d3",
"status": "affected",
"version": "4c3dbb2c312c9fafbac30d98c523b8b1f3455d78",
"versionType": "git"
},
{
"lessThan": "1da4ab7189f1064b3b712b388772c008b4d82580",
"status": "affected",
"version": "4c3dbb2c312c9fafbac30d98c523b8b1f3455d78",
"versionType": "git"
},
{
"lessThan": "1a17ea9861e89585361caa8bc231bd22dc6dbe7d",
"status": "affected",
"version": "4c3dbb2c312c9fafbac30d98c523b8b1f3455d78",
"versionType": "git"
},
{
"lessThan": "c5fc49d8470c5ebf3b41607600f277158f159950",
"status": "affected",
"version": "4c3dbb2c312c9fafbac30d98c523b8b1f3455d78",
"versionType": "git"
},
{
"lessThan": "3d4c2268bd7243c3780fe32bf24ff876da272acf",
"status": "affected",
"version": "4c3dbb2c312c9fafbac30d98c523b8b1f3455d78",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/gpu/drm/drm_gem_framebuffer_helper.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "4.14"
},
{
"lessThan": "4.14",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.258",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.209",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.175",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.140",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.90",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.32",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.0.*",
"status": "unaffected",
"version": "7.0.9",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.1",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.258",
"versionStartIncluding": "4.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.209",
"versionStartIncluding": "4.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.175",
"versionStartIncluding": "4.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.140",
"versionStartIncluding": "4.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.90",
"versionStartIncluding": "4.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.32",
"versionStartIncluding": "4.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0.9",
"versionStartIncluding": "4.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.1",
"versionStartIncluding": "4.14",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\ndrm/gem: Fix inconsistent plane dimension calculation in drm_gem_fb_init_with_funcs()\n\ndrm_gem_fb_init_with_funcs() computes sub-sampled plane dimensions\nusing plain integer division:\n\n unsigned int width = mode_cmd-\u003ewidth / (i ? info-\u003ehsub : 1);\n unsigned int height = mode_cmd-\u003eheight / (i ? info-\u003evsub : 1);\n\nHowever, the ioctl-level framebuffer_check() in drm_framebuffer.c uses\ndrm_format_info_plane_width/height() which round up dimensions via\nDIV_ROUND_UP(). This inconsistency corrupts the subsequent GEM object\nsize check for certain pixel format and dimension combinations.\n\nFor example, with NV12 (vsub=2) and a 1-pixel-tall framebuffer the\nGEM size validation path sees height=0 instead of height=1. The\nexpression (height - 1) then wraps to UINT_MAX as an unsigned int,\ncausing min_size to overflow and wrap back to a small value. A tiny\nGEM object therefore passes the size guard, yet when the GPU accesses\nthe chroma plane it will read or write memory beyond the object\u0027s\nbounds.\n\nFix by replacing the open-coded divisions with drm_format_info_plane_width()\nand drm_format_info_plane_height(), which use DIV_ROUND_UP() and match\nthe calculation already used in framebuffer_check()."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 7.8,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:L - Reached only via the local DRM_IOCTL_MODE_ADDFB2 ioctl on /dev/dri/cardN; there is no network path.\nAC:L - The attacker fully controls pixel format, dimensions, pitch, offset, and GEM object size, so the integer underflow and undersized-object bypass are triggered deterministically.\nPR:L - ADDFB2 carries no DRM_MASTER/root flag, so any local unprivileged user with access to the primary DRM node can create the malformed framebuffer and (as session master on their own VT) drive the OOB access.\nUI:N - No victim interaction is required; the attacker creates and uses the framebuffer entirely on their own.\nS:U - The out-of-bounds access stays within the kernel\u0027s own memory authority with no crossing of a security boundary such as a VM or IOMMU domain.\nC:H - GPU access to the undersized chroma plane reads adjacent memory over an attacker-controlled, potentially large span, exposing kernel/GPU-visible memory contents.\nI:H - The same out-of-bounds chroma access can write past the GEM object, corrupting adjacent memory and providing a controllable write primitive.\nA:H - Out-of-bounds reads/writes of GPU-accessible memory readily cause kernel oops/panic, yielding a denial of service."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-05T12:30:30.530Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/11427ad6c9f0def5ce567982b785da3191946430"
},
{
"url": "https://git.kernel.org/stable/c/adfc5ba4ef4dd2bca5969f40e8fc7b41fb3902ad"
},
{
"url": "https://git.kernel.org/stable/c/22922f7dae74409fc4bf0f1142710cb6b8ce8cc2"
},
{
"url": "https://git.kernel.org/stable/c/6b992591e04f2cce813bcf239b354f375bbf84d3"
},
{
"url": "https://git.kernel.org/stable/c/1da4ab7189f1064b3b712b388772c008b4d82580"
},
{
"url": "https://git.kernel.org/stable/c/1a17ea9861e89585361caa8bc231bd22dc6dbe7d"
},
{
"url": "https://git.kernel.org/stable/c/c5fc49d8470c5ebf3b41607600f277158f159950"
},
{
"url": "https://git.kernel.org/stable/c/3d4c2268bd7243c3780fe32bf24ff876da272acf"
}
],
"title": "drm/gem: Fix inconsistent plane dimension calculation in drm_gem_fb_init_with_funcs()",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-46209",
"datePublished": "2026-05-28T09:40:27.092Z",
"dateReserved": "2026-05-13T15:03:33.105Z",
"dateUpdated": "2026-08-05T12:30:30.530Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-53059 (GCVE-0-2026-53059)
Vulnerability from cvelistv5
Published
2026-06-24 16:30
Modified
2026-08-26 12:04
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
dm log: fix out-of-bounds write due to region_count overflow
The local variable region_count in create_log_context() is declared as
unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit).
When a device-mapper target has a sufficiently large ti->len with a small
region_size, the division result can exceed UINT_MAX. The truncated
value is then used to calculate bitset_size, causing clean_bits,
sync_bits, and recovering_bits to be allocated far smaller than needed
for the actual number of regions.
Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use
region indices derived from the full untruncated region space, causing
out-of-bounds writes to kernel heap memory allocated by vmalloc.
This can be reproduced by creating a mirror target whose region_count
overflows 32 bits:
dmsetup create bigzero --table '0 8589934594 zero'
dmsetup create mymirror --table '0 8589934594 mirror \
core 2 2 nosync 2 /dev/mapper/bigzero 0 \
/dev/mapper/bigzero 0'
The status output confirms the truncation (sync_count=1 instead of
4294967297, because 0x100000001 was truncated to 1):
$ dmsetup status mymirror
0 8589934594 mirror 2 254:1 254:1 1/4294967297 ...
This leads to a kernel crash in core_in_sync:
BUG: scheduling while atomic: (udev-worker)/9150/0x00000000
RIP: 0010:core_in_sync+0x14/0x30 [dm_log]
CR2: 0000000000000008
Fixing recursive fault but reboot is needed!
Fix by widening the local region_count to sector_t and adding an
explicit overflow check before the value is assigned to lc->region_count.
References
| URL | Tags | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Linux | Linux |
Version: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Version: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Version: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Version: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Version: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Version: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Version: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Version: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 |
||
{
"containers": {
"adp": [
{
"affected": [
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:10.2"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 10",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:6.12.0-211.39.1.el10_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux_eus:10.0"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 10.0 Extended Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:6.12.0-55.98.1.el10_0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:8::nfv"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-553.147.1.rt7.488.el8_10",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:8"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-553.147.1.el8_10",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_aus:8.4"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.4 Advanced Mission Critical Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-305.200.1.el8_4",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_eus_long_life:8.4"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.4 Extended Update Support Long-Life Add-On",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-305.200.1.el8_4",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_aus:8.6"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.6 Advanced Mission Critical Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-372.206.1.el8_6",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_eus_long_life:8.6"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.6 Extended Update Support Long-Life Add-On",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-372.206.1.el8_6",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_tus:8.8"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.8 Telecommunications Update Service",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-477.158.1.el8_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_e4s:8.8"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.8 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-477.158.1.el8_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:9",
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-687.30.1.el9_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_e4s:9.2"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9.2 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-284.188.1.el9_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_e4s:9.2::nfv"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 9.2 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-284.188.1.rt14.473.el9_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_eus:9.6"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9.6 Extended Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-570.135.1.el9_6",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:6"
],
"defaultStatus": "unknown",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 6",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat"
}
],
"datePublic": "2026-06-24T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A flaw was found in the Linux kernel\u0027s device-mapper log (dm log) component. A local attacker could exploit an integer overflow vulnerability where a 64-bit value is truncated to 32 bits, leading to undersized memory allocations. This allows for out-of-bounds writes to kernel memory during log operations. Successful exploitation of this flaw can cause a kernel crash, resulting in a Denial of Service (DoS) for the affected system."
}
],
"metrics": [
{
"other": {
"content": {
"namespace": "https://access.redhat.com/security/updates/classification/",
"value": "Moderate"
},
"type": "Red Hat severity rating"
}
},
{
"cvssV3_1": {
"attackComplexity": "HIGH",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 6.3,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "HIGH",
"integrityImpact": "NONE",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-190",
"description": "Integer Overflow or Wraparound",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-26T12:04:47.682Z",
"orgId": "0b0ca135-0b70-47e7-9f44-1890c2a1c46c",
"shortName": "redhat-SADP"
},
"references": [
{
"tags": [
"vdb-entry",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/security/cve/CVE-2026-53059"
},
{
"name": "RHBZ#2492277",
"tags": [
"issue-tracking",
"x_refsource_REDHAT"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=2492277"
},
{
"tags": [
"x_sadp-csaf-vex"
],
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-53059.json"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:55445"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:45114"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:59662"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:56574"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:45192"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:45115"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:47248"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:53989"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:52649"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:45116"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:59663"
}
],
"solutions": [
{
"lang": "en",
"value": "RHSA-2026:55445: Red Hat Enterprise Linux AppStream EUS (v. 10.0), Red Hat Enterprise Linux BaseOS EUS (v. 10.0), Red Hat Enterprise Linux CodeReady Linux Builder EUS (v. 10.0), Red Hat Enterprise Linux Real Time EUS (v. 10.0), Red Hat Enterprise Linux Real Time for NFV EUS (v. 10.0)"
},
{
"lang": "en",
"value": "RHSA-2026:45114: Red Hat Enterprise Linux AppStream (v. 10), Red Hat Enterprise Linux BaseOS (v. 10), Red Hat Enterprise Linux CodeReady Linux Builder (v. 10), Red Hat Enterprise Linux Real Time (v. 10), Red Hat Enterprise Linux Real Time for NFV (v. 10)"
},
{
"lang": "en",
"value": "RHSA-2026:59662: Red Hat Enterprise Linux AppStream E4S (v.9.2), Red Hat Enterprise Linux BaseOS E4S (v.9.2)"
},
{
"lang": "en",
"value": "RHSA-2026:56574: Red Hat CodeReady Linux Builder EUS (v.9.6), Red Hat Enterprise Linux AppStream EUS (v.9.6), Red Hat Enterprise Linux BaseOS EUS (v.9.6), Red Hat Enterprise Linux Real Time EUS (v.9.6), Red Hat Enterprise Linux Real Time for NFV EUS (v.9.6)"
},
{
"lang": "en",
"value": "RHSA-2026:45192: Red Hat Enterprise Linux AppStream (v. 9), Red Hat Enterprise Linux BaseOS (v. 9), Red Hat Enterprise Linux CodeReady Linux Builder (v. 9), Red Hat Enterprise Linux Real Time (v. 9), Red Hat Enterprise Linux Real Time for NFV (v. 9)"
},
{
"lang": "en",
"value": "RHSA-2026:45115: Red Hat Enterprise Linux BaseOS (v. 8), Red Hat Enterprise Linux CRB (v. 8)"
},
{
"lang": "en",
"value": "RHSA-2026:47248: Red Hat Enterprise Linux BaseOS AUS (v.8.4), Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.4)"
},
{
"lang": "en",
"value": "RHSA-2026:53989: Red Hat Enterprise Linux BaseOS AUS (v.8.6), Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.6)"
},
{
"lang": "en",
"value": "RHSA-2026:52649: Red Hat Enterprise Linux BaseOS E4S (v.8.8), Red Hat Enterprise Linux BaseOS TUS (v.8.8)"
},
{
"lang": "en",
"value": "RHSA-2026:45116: Red Hat Enterprise Linux NFV (v. 8), Red Hat Enterprise Linux RT (v. 8)"
},
{
"lang": "en",
"value": "RHSA-2026:59663: Red Hat Enterprise Linux Real Time E4S (v.9.2), Red Hat Enterprise Linux Real Time for NFV E4S (v.9.2)"
}
],
"timeline": [
{
"lang": "en",
"time": "2026-06-24T00:00:00.000Z",
"value": "Reported to Red Hat."
},
{
"lang": "en",
"time": "2026-06-24T00:00:00.000Z",
"value": "Made public."
}
],
"title": "kernel: dm log: fix out-of-bounds write due to region_count overflow",
"x_adpType": "supplier",
"x_generator": {
"engine": "sadp-cli 1.0.0"
}
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/md/dm-log.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "44ab8875ae4a2842bde2d756bed195d375e0debb",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "defe483e47173768c227532694dc78cb65db5f09",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "3ec74da927b4e171a6fc0e77b1188ba4d019af51",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "d4ac87567f86a55c3c92e9a5144dcd943a9772a1",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "12bd5b88e91a02785244ff1d20fb157e96e9cdc8",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "b455903eed4558982be0811f5b7f44f6bbc4ff57",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "4ec8323b9f0764a14d532b1ae9b87f8a9fecb867",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
},
{
"lessThan": "c20e36b7631d83e7535877f08af8b0af72c44b1a",
"status": "affected",
"version": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/md/dm-log.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "2.6.12"
},
{
"lessThan": "2.6.12",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.258",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.209",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.175",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.141",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.91",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.33",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.0.*",
"status": "unaffected",
"version": "7.0.10",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.1",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.258",
"versionStartIncluding": "2.6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.209",
"versionStartIncluding": "2.6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.175",
"versionStartIncluding": "2.6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.141",
"versionStartIncluding": "2.6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.91",
"versionStartIncluding": "2.6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.33",
"versionStartIncluding": "2.6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0.10",
"versionStartIncluding": "2.6.12",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.1",
"versionStartIncluding": "2.6.12",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\ndm log: fix out-of-bounds write due to region_count overflow\n\nThe local variable region_count in create_log_context() is declared as\nunsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit).\nWhen a device-mapper target has a sufficiently large ti-\u003elen with a small\nregion_size, the division result can exceed UINT_MAX. The truncated\nvalue is then used to calculate bitset_size, causing clean_bits,\nsync_bits, and recovering_bits to be allocated far smaller than needed\nfor the actual number of regions.\n\nSubsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use\nregion indices derived from the full untruncated region space, causing\nout-of-bounds writes to kernel heap memory allocated by vmalloc.\n\nThis can be reproduced by creating a mirror target whose region_count\noverflows 32 bits:\n\n dmsetup create bigzero --table \u00270 8589934594 zero\u0027\n dmsetup create mymirror --table \u00270 8589934594 mirror \\\n core 2 2 nosync 2 /dev/mapper/bigzero 0 \\\n /dev/mapper/bigzero 0\u0027\n\nThe status output confirms the truncation (sync_count=1 instead of\n4294967297, because 0x100000001 was truncated to 1):\n\n $ dmsetup status mymirror\n 0 8589934594 mirror 2 254:1 254:1 1/4294967297 ...\n\nThis leads to a kernel crash in core_in_sync:\n\n BUG: scheduling while atomic: (udev-worker)/9150/0x00000000\n RIP: 0010:core_in_sync+0x14/0x30 [dm_log]\n CR2: 0000000000000008\n Fixing recursive fault but reboot is needed!\n\nFix by widening the local region_count to sector_t and adding an\nexplicit overflow check before the value is assigned to lc-\u003eregion_count."
}
],
"providerMetadata": {
"dateUpdated": "2026-06-24T16:30:04.210Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/44ab8875ae4a2842bde2d756bed195d375e0debb"
},
{
"url": "https://git.kernel.org/stable/c/defe483e47173768c227532694dc78cb65db5f09"
},
{
"url": "https://git.kernel.org/stable/c/3ec74da927b4e171a6fc0e77b1188ba4d019af51"
},
{
"url": "https://git.kernel.org/stable/c/d4ac87567f86a55c3c92e9a5144dcd943a9772a1"
},
{
"url": "https://git.kernel.org/stable/c/12bd5b88e91a02785244ff1d20fb157e96e9cdc8"
},
{
"url": "https://git.kernel.org/stable/c/b455903eed4558982be0811f5b7f44f6bbc4ff57"
},
{
"url": "https://git.kernel.org/stable/c/4ec8323b9f0764a14d532b1ae9b87f8a9fecb867"
},
{
"url": "https://git.kernel.org/stable/c/c20e36b7631d83e7535877f08af8b0af72c44b1a"
}
],
"title": "dm log: fix out-of-bounds write due to region_count overflow",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-53059",
"datePublished": "2026-06-24T16:30:04.210Z",
"dateReserved": "2026-06-09T07:44:35.382Z",
"dateUpdated": "2026-08-26T12:04:47.682Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-43500 (GCVE-0-2026-43500)
Vulnerability from cvelistv5
Published
2026-05-11 06:26
Modified
2026-08-24 12:07
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Also unshare DATA/RESPONSE packets when paged frags are present
The DATA-packet handler in rxrpc_input_call_event() and the RESPONSE
handler in rxrpc_verify_response() copy the skb to a linear one before
calling into the security ops only when skb_cloned() is true. An skb
that is not cloned but still carries externally-owned paged fragments
(e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via
__ip_append_data, or a chained skb_has_frag_list()) falls through to
the in-place decryption path, which binds the frag pages directly into
the AEAD/skcipher SGL via skb_to_sgvec().
Extend the gate to also unshare when skb_has_frag_list() or
skb_has_shared_frag() is true. This catches the splice-loopback vector
and other externally-shared frag sources while preserving the
zero-copy fast path for skbs whose frags are kernel-private (e.g. NIC
page_pool RX, GRO). The OOM/trace handling already in place is reused.
References
| URL | Tags | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|||||||||||||||||
Impacted products
{
"containers": {
"adp": [
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 7.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-43500",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-05-11T15:51:19.227001Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-787",
"description": "CWE-787 Out-of-bounds Write",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-05-11T15:53:36.563Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"references": [
{
"tags": [
"exploit"
],
"url": "https://github.com/V4bel/dirtyfrag"
}
],
"title": "CISA ADP Vulnrichment"
},
{
"affected": [
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:10"
],
"defaultStatus": "unaffected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 10",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:10"
],
"defaultStatus": "unaffected",
"packageName": "libkrun",
"product": "Red Hat Enterprise Linux 10",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:6"
],
"defaultStatus": "unaffected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 6",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "unaffected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "unaffected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:8"
],
"defaultStatus": "unaffected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:8"
],
"defaultStatus": "unaffected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "unaffected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "unaffected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:openshift:4"
],
"defaultStatus": "unaffected",
"packageName": "openshift/ose-rhel-coreos-9",
"product": "Red Hat OpenShift Container Platform 4",
"vendor": "Red Hat"
}
],
"datePublic": "2026-05-11T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A flaw was found in the Linux kernel\u0027s RxRPC networking subsystem. When a socket buffer carrying a page-cache reference reaches the RxRPC authentication verification path, the kernel performs an in-place decryption directly on the referenced page without first isolating the buffer. A low-privileged local attacker can exploit this behavior to corrupt the page-cache contents of readable files, including sensitive system files such as /etc/passwd, and obtain root privileges. Exploitation does not require unprivileged user or network namespaces, but depends on the RxRPC protocol stack being available on the target system."
}
],
"metrics": [
{
"other": {
"content": {
"namespace": "https://access.redhat.com/security/updates/classification/",
"value": "Important"
},
"type": "Red Hat severity rating"
}
},
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 7.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-123",
"description": "Write-what-where Condition",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-24T12:07:10.966Z",
"orgId": "0b0ca135-0b70-47e7-9f44-1890c2a1c46c",
"shortName": "redhat-SADP"
},
"references": [
{
"tags": [
"vdb-entry",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/security/cve/CVE-2026-43500"
},
{
"name": "RHBZ#2468273",
"tags": [
"issue-tracking",
"x_refsource_REDHAT"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=2468273"
},
{
"tags": [
"x_sadp-csaf-vex"
],
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-43500.json"
}
],
"timeline": [
{
"lang": "en",
"time": "2026-05-11T00:00:00.000Z",
"value": "Reported to Red Hat."
},
{
"lang": "en",
"time": "2026-05-11T00:00:00.000Z",
"value": "Made public."
}
],
"title": "kernel: \"Dirty Frag\" RxRPC variant is a new universal Local Privilege Escalation (LPE) vulnerability in the Linux kernel",
"x_adpType": "supplier",
"x_generator": {
"engine": "sadp-cli 1.0.0"
}
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"net/rxrpc/call_event.c",
"net/rxrpc/conn_event.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "7c504ffab3efce8f7e4f463b314ae31030bdf18b",
"status": "affected",
"version": "d0d5c0cd1e711c98703f3544c1e6fc1372898de5",
"versionType": "git"
},
{
"lessThan": "3711382a77342a9a1c3d2e7330dcfc7ea927f568",
"status": "affected",
"version": "d0d5c0cd1e711c98703f3544c1e6fc1372898de5",
"versionType": "git"
},
{
"lessThan": "3eae0f4f9f7206a4801efa5e0235c25bbd5a412c",
"status": "affected",
"version": "d0d5c0cd1e711c98703f3544c1e6fc1372898de5",
"versionType": "git"
},
{
"lessThan": "d45179f8795222ce858770dc619abe51f9d24411",
"status": "affected",
"version": "d0d5c0cd1e711c98703f3544c1e6fc1372898de5",
"versionType": "git"
},
{
"lessThan": "aa54b1d27fe0c2b78e664a34fd0fdf7cd1960d71",
"status": "affected",
"version": "d0d5c0cd1e711c98703f3544c1e6fc1372898de5",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"net/rxrpc/call_event.c",
"net/rxrpc/conn_event.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "5.3"
},
{
"lessThan": "5.3",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.140",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.88",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.29",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.0.*",
"status": "unaffected",
"version": "7.0.6",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.1",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.140",
"versionStartIncluding": "5.3",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.88",
"versionStartIncluding": "5.3",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.29",
"versionStartIncluding": "5.3",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0.6",
"versionStartIncluding": "5.3",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.1",
"versionStartIncluding": "5.3",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nrxrpc: Also unshare DATA/RESPONSE packets when paged frags are present\n\nThe DATA-packet handler in rxrpc_input_call_event() and the RESPONSE\nhandler in rxrpc_verify_response() copy the skb to a linear one before\ncalling into the security ops only when skb_cloned() is true. An skb\nthat is not cloned but still carries externally-owned paged fragments\n(e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via\n__ip_append_data, or a chained skb_has_frag_list()) falls through to\nthe in-place decryption path, which binds the frag pages directly into\nthe AEAD/skcipher SGL via skb_to_sgvec().\n\nExtend the gate to also unshare when skb_has_frag_list() or\nskb_has_shared_frag() is true. This catches the splice-loopback vector\nand other externally-shared frag sources while preserving the\nzero-copy fast path for skbs whose frags are kernel-private (e.g. NIC\npage_pool RX, GRO). The OOM/trace handling already in place is reused."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 7.8,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:L - The exploitable shared-fragment condition is created locally by sending RxRPC-shaped UDP data with splice/vmsplice/sendfile-backed pages into the local receive path; ordinary remote packets do not provide attacker-owned page frags on the receiver.\nAC:L - No race or hard-to-control timing is required; an attacker can construct the packet shape and encrypted contents needed to reach the in-place decryption path.\nPR:L - The attacker needs local code execution to create sockets and use splice-backed UDP transmission, but AF_RXRPC socket creation and the relevant send path do not require administrative privileges.\nUI:N - After the local attacker runs code, exploitation does not require a victim user to open files, mount filesystems, or take any other action.\nS:U - The vulnerability affects kernel memory/page-cache handling within the same host security authority and is not a VM, IOMMU, or sandbox boundary escape by itself.\nC:H - The bug is a memory/page-cache corruption primitive caused by decrypting directly into externally owned skb fragments, and successful privilege escalation would allow broad disclosure of protected data.\nI:H - The attacker can influence plaintext written by in-place decryption into shared backing pages, making high-impact data modification and privilege escalation defensible.\nA:H - Corrupting shared packet/page backing storage can destabilize kernel consumers or corrupt critical data, making kernel crash or severe service disruption plausible."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-05T12:28:23.115Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/7c504ffab3efce8f7e4f463b314ae31030bdf18b"
},
{
"url": "https://git.kernel.org/stable/c/3711382a77342a9a1c3d2e7330dcfc7ea927f568"
},
{
"url": "https://git.kernel.org/stable/c/3eae0f4f9f7206a4801efa5e0235c25bbd5a412c"
},
{
"url": "https://git.kernel.org/stable/c/d45179f8795222ce858770dc619abe51f9d24411"
},
{
"url": "https://git.kernel.org/stable/c/aa54b1d27fe0c2b78e664a34fd0fdf7cd1960d71"
}
],
"title": "rxrpc: Also unshare DATA/RESPONSE packets when paged frags are present",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-43500",
"datePublished": "2026-05-11T06:26:45.838Z",
"dateReserved": "2026-05-01T14:12:56.014Z",
"dateUpdated": "2026-08-24T12:07:10.966Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2025-68183 (GCVE-0-2025-68183)
Vulnerability from cvelistv5
Published
2025-12-16 13:43
Modified
2026-08-05 12:10
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
ima: don't clear IMA_DIGSIG flag when setting or removing non-IMA xattr
Currently when both IMA and EVM are in fix mode, the IMA signature will
be reset to IMA hash if a program first stores IMA signature in
security.ima and then writes/removes some other security xattr for the
file.
For example, on Fedora, after booting the kernel with "ima_appraise=fix
evm=fix ima_policy=appraise_tcb" and installing rpm-plugin-ima,
installing/reinstalling a package will not make good reference IMA
signature generated. Instead IMA hash is generated,
# getfattr -m - -d -e hex /usr/bin/bash
# file: usr/bin/bash
security.ima=0x0404...
This happens because when setting security.selinux, the IMA_DIGSIG flag
that had been set early was cleared. As a result, IMA hash is generated
when the file is closed.
Similarly, IMA signature can be cleared on file close after removing
security xattr like security.evm or setting/removing ACL.
Prevent replacing the IMA file signature with a file hash, by preventing
the IMA_DIGSIG flag from being reset.
Here's a minimal C reproducer which sets security.selinux as the last
step which can also replaced by removing security.evm or setting ACL,
#include <stdio.h>
#include <sys/xattr.h>
#include <fcntl.h>
#include <unistd.h>
#include <string.h>
#include <stdlib.h>
int main() {
const char* file_path = "/usr/sbin/test_binary";
const char* hex_string = "030204d33204490066306402304";
int length = strlen(hex_string);
char* ima_attr_value;
int fd;
fd = open(file_path, O_WRONLY|O_CREAT|O_EXCL, 0644);
if (fd == -1) {
perror("Error opening file");
return 1;
}
ima_attr_value = (char*)malloc(length / 2 );
for (int i = 0, j = 0; i < length; i += 2, j++) {
sscanf(hex_string + i, "%2hhx", &ima_attr_value[j]);
}
if (fsetxattr(fd, "security.ima", ima_attr_value, length/2, 0) == -1) {
perror("Error setting extended attribute");
close(fd);
return 1;
}
const char* selinux_value= "system_u:object_r:bin_t:s0";
if (fsetxattr(fd, "security.selinux", selinux_value, strlen(selinux_value), 0) == -1) {
perror("Error setting extended attribute");
close(fd);
return 1;
}
close(fd);
return 0;
}
References
| URL | Tags | |
|---|---|---|
Impacted products
{
"containers": {
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"security/integrity/ima/ima_appraise.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "d2993a7e98eb70c737c6f5365a190e79c72b8407",
"status": "affected",
"version": "e3ccfe1ad7d895487977ef64eda3441d16c9851a",
"versionType": "git"
},
{
"lessThan": "edd824eb45e4f7e05ad3ab090dab6dbdb79cd292",
"status": "affected",
"version": "e3ccfe1ad7d895487977ef64eda3441d16c9851a",
"versionType": "git"
},
{
"lessThan": "02aa671c08a4834bef5166743a7b88686fbfa023",
"status": "affected",
"version": "e3ccfe1ad7d895487977ef64eda3441d16c9851a",
"versionType": "git"
},
{
"lessThan": "88b4cbcf6b041ae0f2fc8a34554a5b6a83a2b7cd",
"status": "affected",
"version": "e3ccfe1ad7d895487977ef64eda3441d16c9851a",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"security/integrity/ima/ima_appraise.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "5.14"
},
{
"lessThan": "5.14",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.117",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.58",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.17.*",
"status": "unaffected",
"version": "6.17.8",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "6.18",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.117",
"versionStartIncluding": "5.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.58",
"versionStartIncluding": "5.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.17.8",
"versionStartIncluding": "5.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18",
"versionStartIncluding": "5.14",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nima: don\u0027t clear IMA_DIGSIG flag when setting or removing non-IMA xattr\n\nCurrently when both IMA and EVM are in fix mode, the IMA signature will\nbe reset to IMA hash if a program first stores IMA signature in\nsecurity.ima and then writes/removes some other security xattr for the\nfile.\n\nFor example, on Fedora, after booting the kernel with \"ima_appraise=fix\nevm=fix ima_policy=appraise_tcb\" and installing rpm-plugin-ima,\ninstalling/reinstalling a package will not make good reference IMA\nsignature generated. Instead IMA hash is generated,\n\n # getfattr -m - -d -e hex /usr/bin/bash\n # file: usr/bin/bash\n security.ima=0x0404...\n\nThis happens because when setting security.selinux, the IMA_DIGSIG flag\nthat had been set early was cleared. As a result, IMA hash is generated\nwhen the file is closed.\n\nSimilarly, IMA signature can be cleared on file close after removing\nsecurity xattr like security.evm or setting/removing ACL.\n\nPrevent replacing the IMA file signature with a file hash, by preventing\nthe IMA_DIGSIG flag from being reset.\n\nHere\u0027s a minimal C reproducer which sets security.selinux as the last\nstep which can also replaced by removing security.evm or setting ACL,\n\n #include \u003cstdio.h\u003e\n #include \u003csys/xattr.h\u003e\n #include \u003cfcntl.h\u003e\n #include \u003cunistd.h\u003e\n #include \u003cstring.h\u003e\n #include \u003cstdlib.h\u003e\n\n int main() {\n const char* file_path = \"/usr/sbin/test_binary\";\n const char* hex_string = \"030204d33204490066306402304\";\n int length = strlen(hex_string);\n char* ima_attr_value;\n int fd;\n\n fd = open(file_path, O_WRONLY|O_CREAT|O_EXCL, 0644);\n if (fd == -1) {\n perror(\"Error opening file\");\n return 1;\n }\n\n ima_attr_value = (char*)malloc(length / 2 );\n for (int i = 0, j = 0; i \u003c length; i += 2, j++) {\n sscanf(hex_string + i, \"%2hhx\", \u0026ima_attr_value[j]);\n }\n\n if (fsetxattr(fd, \"security.ima\", ima_attr_value, length/2, 0) == -1) {\n perror(\"Error setting extended attribute\");\n close(fd);\n return 1;\n }\n\n const char* selinux_value= \"system_u:object_r:bin_t:s0\";\n if (fsetxattr(fd, \"security.selinux\", selinux_value, strlen(selinux_value), 0) == -1) {\n perror(\"Error setting extended attribute\");\n close(fd);\n return 1;\n }\n\n close(fd);\n\n return 0;\n }"
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 7.8,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:L - Triggering requires local syscalls against a file on the system \u2014 `setxattr`/`fsetxattr` on an EVM-protected xattr, `setfacl`, or `fremovexattr` \u2014 followed by an open/close of the target file. No network, adjacent-network, or physical path reaches the IMA appraisal hooks.\nAC:L - The commit ships a deterministic reproducer: setting any EVM-protected xattr or a POSIX ACL unconditionally clears IMA_DIGSIG every time, with no memory-layout or timing luck involved. The enforce-mode variant needs a race against `process_measurement()`\u0027s `MAY_WRITE` check, but `ima_reset_appraise_flags()` takes no `iint-\u003emutex`, and the attacker drives both sides (one thread spinning on `setxattr(\"system.posix_acl_access\")`, another on `open(O_WRONLY)`); the required IMA-appraise + EVM configuration is a shipped, supported Fedora/RHEL setup, not a rare build option.\nPR:L - `vfs_set_acl()` invokes `security_inode_set_acl()` \u2192 `ima_inode_set_acl()` \u2192 `ima_reset_appraise_flags(inode, 0)` before `set_posix_acl()` ever reaches its `inode_owner_or_capable()` check, so an unprivileged user with no capabilities and no ownership of the file clears the cached IMA_DIGSIG bit on any signed appraised binary \u2014 the syscall fails with -EPERM only after the flag is already gone. No CAP_SYS_ADMIN is needed for this path, unlike the `security.ima` path guarded by `ima_protect_xattr()`.\nUI:N - The attacker performs the xattr/ACL operation and the file open/close entirely from their own process; no victim must mount a filesystem, open a file, or take any other action for the IMA_DIGSIG flag to be cleared and the signature to be replaced.\nS:U - The defeated control (IMA appraisal) and the affected resources (files and their security xattrs) live in the same kernel security authority; no VM, hypervisor, IOMMU, or sandbox boundary is crossed.\nC:H - Clearing IMA_DIGSIG both drops the \"signed files cannot be opened for write\" enforcement at `ima_main.c:472` and lets `ima_update_xattr()` re-bless the modified content with a fresh hash plus EVM HMAC, so attacker-substituted content in an appraised executable passes appraisal and subsequently runs \u2014 typically in a privileged/service context \u2014 yielding full disclosure of data reachable by that code. This is the standard treatment of a code-integrity/signature-verification bypass; the bug itself contains no direct memory-read primitive.\nI:H - The file\u0027s IMA digital signature \u2014 the one integrity artifact a local attacker cannot forge, since it is verified against the trusted IMA keyring \u2014 is silently destroyed and replaced by a locally computed hash written through `__vfs_setxattr_noperm()`, which bypasses the `CAP_SYS_ADMIN` gate in `ima_protect_xattr()`. Combined with the lost write-block, this converts \"signed and immutable\" into \"mutable and re-blessed on close\", a complete integrity bypass of IMA appraisal for the affected file.\nA:H - Once a signature is replaced by a plain hash, any policy carrying IMA_DIGSIG_REQUIRED (`appraise_type=imasig`) rejects that file in enforce mode, so appraised binaries become permanently unexecutable \u2014 applied to system-critical files such as init, sshd, or libc consumers this denies service and can leave the system unbootable, and the corrupted xattr persists on disk until the file is re-signed out of band."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-05T12:10:06.378Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/d2993a7e98eb70c737c6f5365a190e79c72b8407"
},
{
"url": "https://git.kernel.org/stable/c/edd824eb45e4f7e05ad3ab090dab6dbdb79cd292"
},
{
"url": "https://git.kernel.org/stable/c/02aa671c08a4834bef5166743a7b88686fbfa023"
},
{
"url": "https://git.kernel.org/stable/c/88b4cbcf6b041ae0f2fc8a34554a5b6a83a2b7cd"
}
],
"title": "ima: don\u0027t clear IMA_DIGSIG flag when setting or removing non-IMA xattr",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2025-68183",
"datePublished": "2025-12-16T13:43:01.178Z",
"dateReserved": "2025-12-16T13:41:40.252Z",
"dateUpdated": "2026-08-05T12:10:06.378Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-43037 (GCVE-0-2026-43037)
Vulnerability from cvelistv5
Published
2026-05-01 14:15
Modified
2026-08-24 12:07
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
ip6_tunnel: clear skb2->cb[] in ip4ip6_err()
Oskar Kjos reported the following problem.
ip4ip6_err() calls icmp_send() on a cloned skb whose cb[] was written
by the IPv6 receive path as struct inet6_skb_parm. icmp_send() passes
IPCB(skb2) to __ip_options_echo(), which interprets that cb[] region
as struct inet_skb_parm (IPv4). The layouts differ: inet6_skb_parm.nhoff
at offset 14 overlaps inet_skb_parm.opt.rr, producing a non-zero rr
value. __ip_options_echo() then reads optlen from attacker-controlled
packet data at sptr[rr+1] and copies that many bytes into dopt->__data,
a fixed 40-byte stack buffer (IP_OPTIONS_DATA_FIXED_SIZE).
To fix this we clear skb2->cb[], as suggested by Oskar Kjos.
Also add minimal IPv4 header validation (version == 4, ihl >= 5).
References
| URL | Tags | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Linux | Linux |
Version: c4d3efafcc933fd2ffd169d7dc4f980393a13796 Version: c4d3efafcc933fd2ffd169d7dc4f980393a13796 Version: c4d3efafcc933fd2ffd169d7dc4f980393a13796 Version: c4d3efafcc933fd2ffd169d7dc4f980393a13796 Version: c4d3efafcc933fd2ffd169d7dc4f980393a13796 Version: c4d3efafcc933fd2ffd169d7dc4f980393a13796 Version: c4d3efafcc933fd2ffd169d7dc4f980393a13796 Version: c4d3efafcc933fd2ffd169d7dc4f980393a13796 |
||
{
"containers": {
"adp": [
{
"affected": [
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux_nvidia:10::el10"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "NVIDIA for RHEL 10",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:6.12.0-212.10.el10nv",
"versionType": "rpm"
},
{
"lessThan": "*",
"status": "unaffected",
"version": "0:6.12.0-231.12.el10nv",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:10.2"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 10",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:6.12.0-211.22.1.el10_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:10.2"
],
"defaultStatus": "unaffected",
"packageName": "kpatch-patch",
"product": "Red Hat Enterprise Linux 10",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux_eus:10.0"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 10.0 Extended Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:6.12.0-55.77.1.el10_0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_els:6"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 6 Extended Lifecycle Support - EXTENSION",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:2.6.32-754.61.1.el6",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_extras_rt_els:7"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 7 Extended Lifecycle Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:3.10.0-1160.155.1.rt56.1307.el7",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_els:7"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 7 Extended Lifecycle Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:3.10.0-1160.153.1.el7",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:8::nfv"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-553.132.1.rt7.473.el8_10",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:8"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-553.132.1.el8_10",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:8"
],
"defaultStatus": "unaffected",
"packageName": "kpatch-patch",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_aus:8.4"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.4 Advanced Mission Critical Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-305.194.1.el8_4",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_eus_long_life:8.4"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.4 Extended Update Support Long-Life Add-On",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-305.194.1.el8_4",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_aus:8.6"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.6 Advanced Mission Critical Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-372.195.1.el8_6",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_eus_long_life:8.6"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.6 Extended Update Support Long-Life Add-On",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-372.195.1.el8_6",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_tus:8.8"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.8 Telecommunications Update Service",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-477.145.1.el8_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_e4s:8.8"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.8 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-477.145.1.el8_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_e4s:8.8"
],
"defaultStatus": "unaffected",
"packageName": "kpatch-patch",
"product": "Red Hat Enterprise Linux 8.8 Update Services for SAP Solutions",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:9",
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-687.15.1.el9_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "unaffected",
"packageName": "kpatch-patch",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_e4s:9.2"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9.2 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-284.174.1.el9_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_e4s:9.2::nfv"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 9.2 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-284.174.1.rt14.459.el9_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_e4s:9.2"
],
"defaultStatus": "unaffected",
"packageName": "kpatch-patch",
"product": "Red Hat Enterprise Linux 9.2 Update Services for SAP Solutions",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_e4s:9.4"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9.4 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-427.129.1.el9_4",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_e4s:9.4"
],
"defaultStatus": "unaffected",
"packageName": "kpatch-patch",
"product": "Red Hat Enterprise Linux 9.4 Update Services for SAP Solutions",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_eus:9.6"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9.6 Extended Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-570.119.1.el9_6",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_eus:9.6"
],
"defaultStatus": "unaffected",
"packageName": "kpatch-patch",
"product": "Red Hat Enterprise Linux 9.6 Extended Update Support",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:openshift:4.12::el8"
],
"defaultStatus": "affected",
"packageName": "rhcos",
"product": "Red Hat OpenShift Container Platform 4.12",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "412.86.202606140301-0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:openshift:4.13::el9"
],
"defaultStatus": "affected",
"packageName": "rhcos",
"product": "Red Hat OpenShift Container Platform 4.13",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "413.92.202606160406-0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:openshift:4.14::el9"
],
"defaultStatus": "affected",
"packageName": "rhcos",
"product": "Red Hat OpenShift Container Platform 4.14",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "414.92.202606231112-0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:openshift:4.15::el9"
],
"defaultStatus": "affected",
"packageName": "rhcos",
"product": "Red Hat OpenShift Container Platform 4.15",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "415.92.202606200237-0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:openshift:4.16::el9"
],
"defaultStatus": "affected",
"packageName": "rhcos",
"product": "Red Hat OpenShift Container Platform 4.16",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "416.94.202606051757-0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:openshift:4.17::el9"
],
"defaultStatus": "affected",
"packageName": "rhcos",
"product": "Red Hat OpenShift Container Platform 4.17",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "417.94.202606250942-0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:openshift:4.18::el9"
],
"defaultStatus": "affected",
"packageName": "rhcos",
"product": "Red Hat OpenShift Container Platform 4.18",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "418.94.202606051320-0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:openshift:4.19::el9"
],
"defaultStatus": "affected",
"packageName": "rhcos",
"product": "Red Hat OpenShift Container Platform 4.19",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "4.19.9.6.202606100451-0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:openshift:4.20::el9"
],
"defaultStatus": "affected",
"packageName": "rhcos",
"product": "Red Hat OpenShift Container Platform 4.20",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "4.20.9.6.202606101223-0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:openshift:4.21::el9"
],
"defaultStatus": "affected",
"packageName": "rhcos",
"product": "Red Hat OpenShift Container Platform 4.21",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "4.21.9.6.202606101139-0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:openshift:4.22::el9"
],
"defaultStatus": "affected",
"packageName": "rhcos",
"product": "Red Hat OpenShift Container Platform 4.22",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "4.22.9.8.202607220526-0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:10"
],
"defaultStatus": "unaffected",
"packageName": "libkrun",
"product": "Red Hat Enterprise Linux 10",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat"
}
],
"datePublic": "2026-05-01T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A flaw was found in the Linux kernel\u0027s IPv6 tunnel implementation. A remote attacker could exploit this flaw by sending malicious ICMPv6 error messages to cause a stack-based buffer overflow in the kernel\u0027s IPv4-over-IPv6 tunnel error handling code. This could result in a kernel crash (denial of service) or potentially allow arbitrary code execution with kernel privileges."
}
],
"metrics": [
{
"other": {
"content": {
"namespace": "https://access.redhat.com/security/updates/classification/",
"value": "Critical"
},
"type": "Red Hat severity rating"
}
},
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 8.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-843",
"description": "Access of Resource Using Incompatible Type (\u0027Type Confusion\u0027)",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-24T12:07:11.732Z",
"orgId": "0b0ca135-0b70-47e7-9f44-1890c2a1c46c",
"shortName": "redhat-SADP"
},
"references": [
{
"tags": [
"vdb-entry",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/security/cve/CVE-2026-43037"
},
{
"name": "RHBZ#2464351",
"tags": [
"issue-tracking",
"x_refsource_REDHAT"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=2464351"
},
{
"tags": [
"x_sadp-csaf-vex"
],
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-43037.json"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:25534"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:33486"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:27719"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:27729"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:41236"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:26528"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:26542"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:28887"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:28962"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:25044"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:34098"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:25181"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:25200"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:25193"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:25186"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:44232"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:24343"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:25191"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:22940"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:23237"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:23224"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:25217"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:28742"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:25121"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:28749"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:26535"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:25533"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:22964"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:28748"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:28750"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:28738"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:28740"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:28741"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:25120"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:22900"
}
],
"solutions": [
{
"lang": "en",
"value": "RHSA-2026:25534: NVIDIA for RHEL 10"
},
{
"lang": "en",
"value": "RHSA-2026:33486: NVIDIA for RHEL 10"
},
{
"lang": "en",
"value": "RHSA-2026:27719: Red Hat Enterprise Linux Server -EXTENSION(v. 6 ELS-EXTENSION), Red Hat Enterprise Linux Server Optional -EXTENSION (v. 6 ELS -EXTENSION)"
},
{
"lang": "en",
"value": "RHSA-2026:27729: Red Hat Enterprise Linux Server (v. 7 ELS), Red Hat Enterprise Linux Server Optional (v. 7 ELS)"
},
{
"lang": "en",
"value": "RHSA-2026:41236: Red Hat Enterprise Linux for Real Time (v. 7 ELS)"
},
{
"lang": "en",
"value": "RHSA-2026:26528: Red Hat OpenShift Container Platform 4.12"
},
{
"lang": "en",
"value": "RHSA-2026:26542: Red Hat OpenShift Container Platform 4.13"
},
{
"lang": "en",
"value": "RHSA-2026:28887: Red Hat OpenShift Container Platform 4.14"
},
{
"lang": "en",
"value": "RHSA-2026:28962: Red Hat OpenShift Container Platform 4.15"
},
{
"lang": "en",
"value": "RHSA-2026:25044: Red Hat OpenShift Container Platform 4.16"
},
{
"lang": "en",
"value": "RHSA-2026:34098: Red Hat OpenShift Container Platform 4.17"
},
{
"lang": "en",
"value": "RHSA-2026:25181: Red Hat OpenShift Container Platform 4.18"
},
{
"lang": "en",
"value": "RHSA-2026:25200: Red Hat OpenShift Container Platform 4.19"
},
{
"lang": "en",
"value": "RHSA-2026:25193: Red Hat OpenShift Container Platform 4.20"
},
{
"lang": "en",
"value": "RHSA-2026:25186: Red Hat OpenShift Container Platform 4.21"
},
{
"lang": "en",
"value": "RHSA-2026:44232: Red Hat OpenShift Container Platform 4.22"
},
{
"lang": "en",
"value": "RHSA-2026:24343: Red Hat Enterprise Linux AppStream EUS (v. 10.0), Red Hat Enterprise Linux BaseOS EUS (v. 10.0), Red Hat Enterprise Linux CodeReady Linux Builder EUS (v. 10.0), Red Hat Enterprise Linux Real Time EUS (v. 10.0), Red Hat Enterprise Linux Real Time for NFV EUS (v. 10.0)"
},
{
"lang": "en",
"value": "RHSA-2026:25191: Red Hat Enterprise Linux AppStream (v. 10), Red Hat Enterprise Linux BaseOS (v. 10), Red Hat Enterprise Linux CodeReady Linux Builder (v. 10), Red Hat Enterprise Linux Real Time (v. 10), Red Hat Enterprise Linux Real Time for NFV (v. 10)"
},
{
"lang": "en",
"value": "RHSA-2026:22940: Red Hat Enterprise Linux AppStream E4S (v.9.2), Red Hat Enterprise Linux BaseOS E4S (v.9.2)"
},
{
"lang": "en",
"value": "RHSA-2026:23237: Red Hat Enterprise Linux AppStream E4S (v.9.4), Red Hat Enterprise Linux BaseOS E4S (v.9.4), Red Hat Enterprise Linux Real Time E4S (v.9.4), Red Hat Enterprise Linux Real Time for NFV E4S (v.9.4)"
},
{
"lang": "en",
"value": "RHSA-2026:23224: Red Hat CodeReady Linux Builder EUS (v.9.6), Red Hat Enterprise Linux AppStream EUS (v.9.6), Red Hat Enterprise Linux BaseOS EUS (v.9.6), Red Hat Enterprise Linux Real Time EUS (v.9.6), Red Hat Enterprise Linux Real Time for NFV EUS (v.9.6)"
},
{
"lang": "en",
"value": "RHSA-2026:25217: Red Hat Enterprise Linux AppStream (v. 9), Red Hat Enterprise Linux BaseOS (v. 9), Red Hat Enterprise Linux CodeReady Linux Builder (v. 9), Red Hat Enterprise Linux Real Time (v. 9), Red Hat Enterprise Linux Real Time for NFV (v. 9)"
},
{
"lang": "en",
"value": "RHSA-2026:28742: Red Hat Enterprise Linux BaseOS (v. 10)"
},
{
"lang": "en",
"value": "RHSA-2026:25121: Red Hat Enterprise Linux BaseOS (v. 8), Red Hat Enterprise Linux CRB (v. 8)"
},
{
"lang": "en",
"value": "RHSA-2026:28749: Red Hat Enterprise Linux BaseOS (v. 8)"
},
{
"lang": "en",
"value": "RHSA-2026:26535: Red Hat Enterprise Linux BaseOS AUS (v.8.4), Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.4)"
},
{
"lang": "en",
"value": "RHSA-2026:25533: Red Hat Enterprise Linux BaseOS AUS (v.8.6), Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.6)"
},
{
"lang": "en",
"value": "RHSA-2026:22964: Red Hat Enterprise Linux BaseOS E4S (v.8.8), Red Hat Enterprise Linux BaseOS TUS (v.8.8)"
},
{
"lang": "en",
"value": "RHSA-2026:28748: Red Hat Enterprise Linux BaseOS E4S (v.8.8)"
},
{
"lang": "en",
"value": "RHSA-2026:28750: Red Hat Enterprise Linux BaseOS E4S (v.9.2)"
},
{
"lang": "en",
"value": "RHSA-2026:28738: Red Hat Enterprise Linux BaseOS E4S (v.9.4)"
},
{
"lang": "en",
"value": "RHSA-2026:28740: Red Hat Enterprise Linux BaseOS EUS (v.9.6)"
},
{
"lang": "en",
"value": "RHSA-2026:28741: Red Hat Enterprise Linux BaseOS (v. 9)"
},
{
"lang": "en",
"value": "RHSA-2026:25120: Red Hat Enterprise Linux NFV (v. 8), Red Hat Enterprise Linux RT (v. 8)"
},
{
"lang": "en",
"value": "RHSA-2026:22900: Red Hat Enterprise Linux Real Time E4S (v.9.2), Red Hat Enterprise Linux Real Time for NFV E4S (v.9.2)"
}
],
"timeline": [
{
"lang": "en",
"time": "2026-05-01T00:00:00.000Z",
"value": "Reported to Red Hat."
},
{
"lang": "en",
"time": "2026-05-01T00:00:00.000Z",
"value": "Made public."
}
],
"title": "kernel: ip6_tunnel: clear skb2-\u003ecb[] in ip4ip6_err()",
"workarounds": [
{
"lang": "en",
"value": "Mitigation for this issue is to skip loading the affected module `ip6_tunnel` onto the system till we have a fix available, this can be done by a blacklist mechanism, this will ensure the driver is not loaded at the boot time.\n~~~\nHow do I blacklist a kernel module to prevent it from loading automatically? \nhttps://access.redhat.com/solutions/41278 \n~~~\n\nWe may also want to detection and monitoring an affected system as below:\n~~~\nMonitor for exploitation attempts:\n\n# Enable kernel audit for IPv6 tunnel operations\nauditctl -a always,exit -F arch=b64 -S socket -F a0=10 -F a1=3 -k ipv6_tunnel\n\n# Monitor system logs for kernel panics/crashes\njournalctl -k -p err -f | grep -i \"ip6_tunnel\\|icmp\\|stack\"\n~~~"
}
],
"x_adpType": "supplier",
"x_generator": {
"engine": "sadp-cli 1.0.0"
}
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"net/ipv6/ip6_tunnel.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "ea9f65b27c8404e164848ebff1443310fd187629",
"status": "affected",
"version": "c4d3efafcc933fd2ffd169d7dc4f980393a13796",
"versionType": "git"
},
{
"lessThan": "d6621f60192fe10c047a4487be42a6f4c150707f",
"status": "affected",
"version": "c4d3efafcc933fd2ffd169d7dc4f980393a13796",
"versionType": "git"
},
{
"lessThan": "2cc6e3b0fe0f0242d1f530a93a4924f48ab85ba5",
"status": "affected",
"version": "c4d3efafcc933fd2ffd169d7dc4f980393a13796",
"versionType": "git"
},
{
"lessThan": "a0c4ce9900a108eaf55d0f3b399cb55999647d39",
"status": "affected",
"version": "c4d3efafcc933fd2ffd169d7dc4f980393a13796",
"versionType": "git"
},
{
"lessThan": "1063515ce15ff31065c4e7f8265f4c2fd3c54876",
"status": "affected",
"version": "c4d3efafcc933fd2ffd169d7dc4f980393a13796",
"versionType": "git"
},
{
"lessThan": "590f622669b97eaf7b57a1de7b0a6e68c5d8b2c3",
"status": "affected",
"version": "c4d3efafcc933fd2ffd169d7dc4f980393a13796",
"versionType": "git"
},
{
"lessThan": "4a622658f384b03560834cbe8ffcfe69a278f7c8",
"status": "affected",
"version": "c4d3efafcc933fd2ffd169d7dc4f980393a13796",
"versionType": "git"
},
{
"lessThan": "2edfa31769a4add828a7e604b21cb82aaaa05925",
"status": "affected",
"version": "c4d3efafcc933fd2ffd169d7dc4f980393a13796",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"net/ipv6/ip6_tunnel.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "2.6.22"
},
{
"lessThan": "2.6.22",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.253",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.203",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.168",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.134",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.81",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.22",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.19.*",
"status": "unaffected",
"version": "6.19.12",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.0",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.253",
"versionStartIncluding": "2.6.22",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.203",
"versionStartIncluding": "2.6.22",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.168",
"versionStartIncluding": "2.6.22",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.134",
"versionStartIncluding": "2.6.22",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.81",
"versionStartIncluding": "2.6.22",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.22",
"versionStartIncluding": "2.6.22",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.19.12",
"versionStartIncluding": "2.6.22",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0",
"versionStartIncluding": "2.6.22",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nip6_tunnel: clear skb2-\u003ecb[] in ip4ip6_err()\n\nOskar Kjos reported the following problem.\n\nip4ip6_err() calls icmp_send() on a cloned skb whose cb[] was written\nby the IPv6 receive path as struct inet6_skb_parm. icmp_send() passes\nIPCB(skb2) to __ip_options_echo(), which interprets that cb[] region\nas struct inet_skb_parm (IPv4). The layouts differ: inet6_skb_parm.nhoff\nat offset 14 overlaps inet_skb_parm.opt.rr, producing a non-zero rr\nvalue. __ip_options_echo() then reads optlen from attacker-controlled\npacket data at sptr[rr+1] and copies that many bytes into dopt-\u003e__data,\na fixed 40-byte stack buffer (IP_OPTIONS_DATA_FIXED_SIZE).\n\nTo fix this we clear skb2-\u003ecb[], as suggested by Oskar Kjos.\n\nAlso add minimal IPv4 header validation (version == 4, ihl \u003e= 5)."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:N - A remote IPv6 peer can send a crafted ICMPv6 error packet to an IPv6 tunnel endpoint and reach `icmpv6_rcv()` -\u003e `icmpv6_notify()` -\u003e `tunnel46_err()` -\u003e `ip4ip6_err()` without local execution. The vulnerable code processes network packet contents in the kernel network stack.\nAC:L - Triggering is deterministic once an IPv4-over-IPv6 tunnel endpoint exists: the attacker controls the ICMPv6 error, IPv6 extension-header-derived control block state, and quoted inner IPv4 bytes used by `__ip_options_echo()`. There is no race or hard-to-influence condition.\nPR:N - The exploit packet is unauthenticated network input and does not require the attacker to have an account or capabilities on the target. Tunnel configuration requires administration, but exploitation of an already deployed tunnel endpoint does not.\nUI:N - No victim user action is required; receipt and processing of the crafted ICMPv6 packet is enough. The path is normal kernel packet handling.\nS:U - The corruption occurs inside the kernel network stack and impacts the same kernel security authority. This is not a VM escape or cross-scope boundary bypass.\nC:H - The bug is an attacker-controlled kernel stack buffer overflow in `__ip_options_echo()` via a bogus IPv4 option length copied into a fixed 40-byte buffer. Kernel memory corruption of this kind can plausibly be leveraged for high-impact information disclosure.\nI:H - The overflow copies attacker-controlled packet data onto the kernel stack and can plausibly corrupt control data or adjacent state. Under the required higher-severity rule, this supports high integrity impact.\nA:H - Even without full code execution, the kernel stack overflow can trigger an oops, panic, or other fatal corruption. The crafted packet can be sent remotely and repeatedly against a vulnerable tunnel endpoint."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-05T12:25:27.160Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/ea9f65b27c8404e164848ebff1443310fd187629"
},
{
"url": "https://git.kernel.org/stable/c/d6621f60192fe10c047a4487be42a6f4c150707f"
},
{
"url": "https://git.kernel.org/stable/c/2cc6e3b0fe0f0242d1f530a93a4924f48ab85ba5"
},
{
"url": "https://git.kernel.org/stable/c/a0c4ce9900a108eaf55d0f3b399cb55999647d39"
},
{
"url": "https://git.kernel.org/stable/c/1063515ce15ff31065c4e7f8265f4c2fd3c54876"
},
{
"url": "https://git.kernel.org/stable/c/590f622669b97eaf7b57a1de7b0a6e68c5d8b2c3"
},
{
"url": "https://git.kernel.org/stable/c/4a622658f384b03560834cbe8ffcfe69a278f7c8"
},
{
"url": "https://git.kernel.org/stable/c/2edfa31769a4add828a7e604b21cb82aaaa05925"
}
],
"title": "ip6_tunnel: clear skb2-\u003ecb[] in ip4ip6_err()",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-43037",
"datePublished": "2026-05-01T14:15:35.314Z",
"dateReserved": "2026-05-01T14:12:55.978Z",
"dateUpdated": "2026-08-24T12:07:11.732Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2025-68724 (GCVE-0-2025-68724)
Vulnerability from cvelistv5
Published
2025-12-24 10:33
Modified
2026-08-05 12:11
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
crypto: asymmetric_keys - prevent overflow in asymmetric_key_generate_id
Use check_add_overflow() to guard against potential integer overflows
when adding the binary blob lengths and the size of an asymmetric_key_id
structure and return ERR_PTR(-EOVERFLOW) accordingly. This prevents a
possible buffer overflow when copying data from potentially malicious
X.509 certificate fields that can be arbitrarily large, such as ASN.1
INTEGER serial numbers, issuer names, etc.
References
| URL | Tags | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Linux | Linux |
Version: 7901c1a8effbe5f89673bfc09d6e37b8f334f1a7 Version: 7901c1a8effbe5f89673bfc09d6e37b8f334f1a7 Version: 7901c1a8effbe5f89673bfc09d6e37b8f334f1a7 Version: 7901c1a8effbe5f89673bfc09d6e37b8f334f1a7 Version: 7901c1a8effbe5f89673bfc09d6e37b8f334f1a7 Version: 7901c1a8effbe5f89673bfc09d6e37b8f334f1a7 Version: 7901c1a8effbe5f89673bfc09d6e37b8f334f1a7 Version: 7901c1a8effbe5f89673bfc09d6e37b8f334f1a7 |
||
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2025-68724",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-06-16T19:22:49.497362Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-06-16T19:22:59.107Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
},
{
"affected": [
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-14T12:44:06.547Z",
"orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"shortName": "siemens-SADP"
},
"references": [
{
"url": "https://cert-portal.siemens.com/productcert/html/ssa-019113.html"
}
],
"x_adpType": "supplier"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"crypto/asymmetric_keys/asymmetric_type.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "60a7be5ee74408147e439164ac067e418ca74bb4",
"status": "affected",
"version": "7901c1a8effbe5f89673bfc09d6e37b8f334f1a7",
"versionType": "git"
},
{
"lessThan": "c13c6e9de91d7f1dd7df756b1fa5a1f968839d76",
"status": "affected",
"version": "7901c1a8effbe5f89673bfc09d6e37b8f334f1a7",
"versionType": "git"
},
{
"lessThan": "dfc1613961828745165aec6552c3818fa14ab725",
"status": "affected",
"version": "7901c1a8effbe5f89673bfc09d6e37b8f334f1a7",
"versionType": "git"
},
{
"lessThan": "5b8ac617c8dab5cad3c4dc8d84d0987808a0f99c",
"status": "affected",
"version": "7901c1a8effbe5f89673bfc09d6e37b8f334f1a7",
"versionType": "git"
},
{
"lessThan": "c73be4f51eed98fa0c7c189db8f279e1c86bfbf7",
"status": "affected",
"version": "7901c1a8effbe5f89673bfc09d6e37b8f334f1a7",
"versionType": "git"
},
{
"lessThan": "6af753ac5205115e6c310c8c4236c01b59a1c44f",
"status": "affected",
"version": "7901c1a8effbe5f89673bfc09d6e37b8f334f1a7",
"versionType": "git"
},
{
"lessThan": "b7090a5c153105b9fd221a5a81459ee8cd5babd6",
"status": "affected",
"version": "7901c1a8effbe5f89673bfc09d6e37b8f334f1a7",
"versionType": "git"
},
{
"lessThan": "df0845cf447ae1556c3440b8b155de0926cbaa56",
"status": "affected",
"version": "7901c1a8effbe5f89673bfc09d6e37b8f334f1a7",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"crypto/asymmetric_keys/asymmetric_type.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "3.18"
},
{
"lessThan": "3.18",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.248",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.198",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.160",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.120",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.63",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.17.*",
"status": "unaffected",
"version": "6.17.13",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.2",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "6.19",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.248",
"versionStartIncluding": "3.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.198",
"versionStartIncluding": "3.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.160",
"versionStartIncluding": "3.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.120",
"versionStartIncluding": "3.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.63",
"versionStartIncluding": "3.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.17.13",
"versionStartIncluding": "3.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.2",
"versionStartIncluding": "3.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.19",
"versionStartIncluding": "3.18",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\ncrypto: asymmetric_keys - prevent overflow in asymmetric_key_generate_id\n\nUse check_add_overflow() to guard against potential integer overflows\nwhen adding the binary blob lengths and the size of an asymmetric_key_id\nstructure and return ERR_PTR(-EOVERFLOW) accordingly. This prevents a\npossible buffer overflow when copying data from potentially malicious\nX.509 certificate fields that can be arbitrarily large, such as ASN.1\nINTEGER serial numbers, issuer names, etc."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 7.8,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:L - The vulnerable X.509 parsing path is reached through the local add_key syscall and related local PKCS#7 consumers, not directly through network packet processing.\nAC:L - The overflow is deterministic from attacker-controlled certificate field lengths and requires no race, victim-controlled state, or unpredictable condition.\nPR:L - An ordinary unprivileged user can submit an asymmetric key to a writable process or session keyring without capabilities. Parsing occurs before certificate trust and keyring restriction checks.\nUI:N - The attacker directly invokes the keyring interface with the crafted certificate, requiring no action by another user.\nS:U - Exploitation compromises the kernel within the same host security authority and does not inherently cross a VM, IOMMU, or other distinct security boundary.\nC:H - The undersized allocation followed by oversized memcpy operations can corrupt kernel heap objects and potentially enable kernel code execution with arbitrary memory disclosure.\nI:H - The heap out-of-bounds writes can overwrite adjacent objects, function pointers, or credentials, potentially enabling arbitrary kernel writes and control-flow hijacking.\nA:H - The overflow can immediately produce an oops or kernel panic and can be triggered repeatedly by an unprivileged local attacker."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-05T12:11:08.219Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/60a7be5ee74408147e439164ac067e418ca74bb4"
},
{
"url": "https://git.kernel.org/stable/c/c13c6e9de91d7f1dd7df756b1fa5a1f968839d76"
},
{
"url": "https://git.kernel.org/stable/c/dfc1613961828745165aec6552c3818fa14ab725"
},
{
"url": "https://git.kernel.org/stable/c/5b8ac617c8dab5cad3c4dc8d84d0987808a0f99c"
},
{
"url": "https://git.kernel.org/stable/c/c73be4f51eed98fa0c7c189db8f279e1c86bfbf7"
},
{
"url": "https://git.kernel.org/stable/c/6af753ac5205115e6c310c8c4236c01b59a1c44f"
},
{
"url": "https://git.kernel.org/stable/c/b7090a5c153105b9fd221a5a81459ee8cd5babd6"
},
{
"url": "https://git.kernel.org/stable/c/df0845cf447ae1556c3440b8b155de0926cbaa56"
}
],
"title": "crypto: asymmetric_keys - prevent overflow in asymmetric_key_generate_id",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2025-68724",
"datePublished": "2025-12-24T10:33:08.932Z",
"dateReserved": "2025-12-24T10:30:51.027Z",
"dateUpdated": "2026-08-05T12:11:08.219Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-31787 (GCVE-0-2026-31787)
Vulnerability from cvelistv5
Published
2026-04-30 10:31
Modified
2026-06-14 17:44
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
xen/privcmd: fix double free via VMA splitting
privcmd_vm_ops defines .close (privcmd_close), but neither .may_split
nor .open. When userspace does a partial munmap() on a privcmd mapping,
the kernel splits the VMA via __split_vma(). Since may_split is NULL,
the split is allowed. vm_area_dup() copies vm_private_data (a pages
array allocated in alloc_empty_pages()) into the new VMA without any
fixup, because there is no .open callback.
Both VMAs now point to the same pages array. When the unmapped portion
is closed, privcmd_close() calls:
- xen_unmap_domain_gfn_range()
- xen_free_unpopulated_pages()
- kvfree(pages)
The surviving VMA still holds the dangling pointer. When it is later
destroyed, the same sequence runs again, which leads to a double free.
Fix this issue by adding a .may_split callback denying the VMA split.
This is XSA-487 / CVE-2026-31787
References
| URL | Tags | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Linux | Linux |
Version: d71f513985c22f1050295d1a7e4327cf9fb060da Version: d71f513985c22f1050295d1a7e4327cf9fb060da Version: d71f513985c22f1050295d1a7e4327cf9fb060da Version: d71f513985c22f1050295d1a7e4327cf9fb060da Version: d71f513985c22f1050295d1a7e4327cf9fb060da Version: d71f513985c22f1050295d1a7e4327cf9fb060da Version: d71f513985c22f1050295d1a7e4327cf9fb060da Version: d71f513985c22f1050295d1a7e4327cf9fb060da |
||
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2026-04-30T10:39:37.622Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/04/28/14"
},
{
"url": "http://xenbits.xen.org/xsa/advisory-487.html"
}
],
"title": "CVE Program Container"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/xen/privcmd.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "dbf862ce9f009128ab86b234d91413a3e450beb4",
"status": "affected",
"version": "d71f513985c22f1050295d1a7e4327cf9fb060da",
"versionType": "git"
},
{
"lessThan": "2b985d3a024b9e8c24e21671b34e855569763808",
"status": "affected",
"version": "d71f513985c22f1050295d1a7e4327cf9fb060da",
"versionType": "git"
},
{
"lessThan": "1576ff3869cbd3620717195f971c85b7d7fd62b5",
"status": "affected",
"version": "d71f513985c22f1050295d1a7e4327cf9fb060da",
"versionType": "git"
},
{
"lessThan": "402d84ad9e89bd4cbfd07ca8598532b7021daf95",
"status": "affected",
"version": "d71f513985c22f1050295d1a7e4327cf9fb060da",
"versionType": "git"
},
{
"lessThan": "2894a351fe2ea8684919d36df3188b9a35e3926f",
"status": "affected",
"version": "d71f513985c22f1050295d1a7e4327cf9fb060da",
"versionType": "git"
},
{
"lessThan": "446ee446d9ae66f36e95c3c90bbcc4e56b94cde0",
"status": "affected",
"version": "d71f513985c22f1050295d1a7e4327cf9fb060da",
"versionType": "git"
},
{
"lessThan": "71bf829800758a6e3889096e4754ef47ba7fc850",
"status": "affected",
"version": "d71f513985c22f1050295d1a7e4327cf9fb060da",
"versionType": "git"
},
{
"lessThan": "24daca4fc07f3ff8cd0e3f629cd982187f48436a",
"status": "affected",
"version": "d71f513985c22f1050295d1a7e4327cf9fb060da",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/xen/privcmd.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "3.8"
},
{
"lessThan": "3.8",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.254",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.204",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.170",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.137",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.85",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.26",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.0.*",
"status": "unaffected",
"version": "7.0.3",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.1",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.254",
"versionStartIncluding": "3.8",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.204",
"versionStartIncluding": "3.8",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.170",
"versionStartIncluding": "3.8",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.137",
"versionStartIncluding": "3.8",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.85",
"versionStartIncluding": "3.8",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.26",
"versionStartIncluding": "3.8",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0.3",
"versionStartIncluding": "3.8",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.1",
"versionStartIncluding": "3.8",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nxen/privcmd: fix double free via VMA splitting\n\nprivcmd_vm_ops defines .close (privcmd_close), but neither .may_split\nnor .open. When userspace does a partial munmap() on a privcmd mapping,\nthe kernel splits the VMA via __split_vma(). Since may_split is NULL,\nthe split is allowed. vm_area_dup() copies vm_private_data (a pages\narray allocated in alloc_empty_pages()) into the new VMA without any\nfixup, because there is no .open callback.\n\nBoth VMAs now point to the same pages array. When the unmapped portion\nis closed, privcmd_close() calls:\n - xen_unmap_domain_gfn_range()\n - xen_free_unpopulated_pages()\n - kvfree(pages)\n\nThe surviving VMA still holds the dangling pointer. When it is later\ndestroyed, the same sequence runs again, which leads to a double free.\n\nFix this issue by adding a .may_split callback denying the VMA split.\n\nThis is XSA-487 / CVE-2026-31787"
}
],
"providerMetadata": {
"dateUpdated": "2026-06-14T17:44:41.402Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/dbf862ce9f009128ab86b234d91413a3e450beb4"
},
{
"url": "https://git.kernel.org/stable/c/2b985d3a024b9e8c24e21671b34e855569763808"
},
{
"url": "https://git.kernel.org/stable/c/1576ff3869cbd3620717195f971c85b7d7fd62b5"
},
{
"url": "https://git.kernel.org/stable/c/402d84ad9e89bd4cbfd07ca8598532b7021daf95"
},
{
"url": "https://git.kernel.org/stable/c/2894a351fe2ea8684919d36df3188b9a35e3926f"
},
{
"url": "https://git.kernel.org/stable/c/446ee446d9ae66f36e95c3c90bbcc4e56b94cde0"
},
{
"url": "https://git.kernel.org/stable/c/71bf829800758a6e3889096e4754ef47ba7fc850"
},
{
"url": "https://git.kernel.org/stable/c/24daca4fc07f3ff8cd0e3f629cd982187f48436a"
}
],
"title": "xen/privcmd: fix double free via VMA splitting",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-31787",
"datePublished": "2026-04-30T10:31:28.992Z",
"dateReserved": "2026-03-09T15:48:24.141Z",
"dateUpdated": "2026-06-14T17:44:41.402Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-46086 (GCVE-0-2026-46086)
Vulnerability from cvelistv5
Published
2026-05-27 12:58
Modified
2026-06-19 11:59
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
net: bridge: use a stable FDB dst snapshot in RCU readers
Local FDB entries can be rewritten in place by `fdb_delete_local()`, which
updates `f->dst` to another port or to `NULL` while keeping the entry
alive. Several bridge RCU readers inspect `f->dst`, including
`br_fdb_fillbuf()` through the `brforward_read()` sysfs path.
These readers currently load `f->dst` multiple times and can therefore
observe inconsistent values across the check and later dereference.
In `br_fdb_fillbuf()`, this means a concurrent local-FDB update can change
`f->dst` after the NULL check and before the `port_no` dereference,
leading to a NULL-ptr-deref.
Fix this by taking a single `READ_ONCE()` snapshot of `f->dst` in each
affected RCU reader and using that snapshot for the rest of the access
sequence. Also publish the in-place `f->dst` updates in `fdb_delete_local()`
with `WRITE_ONCE()` so the readers and writer use matching access patterns.
References
| URL | Tags | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Linux | Linux |
Version: 960b589f86c74ce582922fcb996103271081f4de Version: 960b589f86c74ce582922fcb996103271081f4de Version: 960b589f86c74ce582922fcb996103271081f4de Version: 960b589f86c74ce582922fcb996103271081f4de Version: 960b589f86c74ce582922fcb996103271081f4de Version: 960b589f86c74ce582922fcb996103271081f4de Version: 960b589f86c74ce582922fcb996103271081f4de Version: 960b589f86c74ce582922fcb996103271081f4de |
||
{
"containers": {
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"net/bridge/br_arp_nd_proxy.c",
"net/bridge/br_fdb.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "c502fa9f094cb03d1d1685c71e2105ab359bc2b8",
"status": "affected",
"version": "960b589f86c74ce582922fcb996103271081f4de",
"versionType": "git"
},
{
"lessThan": "a6ae4511c07b91f597e461406c6330f0d4ff810e",
"status": "affected",
"version": "960b589f86c74ce582922fcb996103271081f4de",
"versionType": "git"
},
{
"lessThan": "1406c4e0ed1eaf8a29801ab1163d00fb7ee4359a",
"status": "affected",
"version": "960b589f86c74ce582922fcb996103271081f4de",
"versionType": "git"
},
{
"lessThan": "0b9e4bbfb7c949151e3acd44ed4aa33614d2e110",
"status": "affected",
"version": "960b589f86c74ce582922fcb996103271081f4de",
"versionType": "git"
},
{
"lessThan": "81af4137a30c4c2dc694dea8cacb180bd66000ef",
"status": "affected",
"version": "960b589f86c74ce582922fcb996103271081f4de",
"versionType": "git"
},
{
"lessThan": "5424e678f9b304e148cf5dcc047cffc7a56a3bb5",
"status": "affected",
"version": "960b589f86c74ce582922fcb996103271081f4de",
"versionType": "git"
},
{
"lessThan": "9a2d9d4e657b23dc21f24cf139e3aeff0b61341f",
"status": "affected",
"version": "960b589f86c74ce582922fcb996103271081f4de",
"versionType": "git"
},
{
"lessThan": "df4601653201de21b487c3e7fffd464790cab808",
"status": "affected",
"version": "960b589f86c74ce582922fcb996103271081f4de",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"net/bridge/br_arp_nd_proxy.c",
"net/bridge/br_fdb.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "3.14"
},
{
"lessThan": "3.14",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.259",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.210",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.176",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.140",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.86",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.27",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.0.*",
"status": "unaffected",
"version": "7.0.4",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.1",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.259",
"versionStartIncluding": "3.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.210",
"versionStartIncluding": "3.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.176",
"versionStartIncluding": "3.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.140",
"versionStartIncluding": "3.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.86",
"versionStartIncluding": "3.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.27",
"versionStartIncluding": "3.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0.4",
"versionStartIncluding": "3.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.1",
"versionStartIncluding": "3.14",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnet: bridge: use a stable FDB dst snapshot in RCU readers\n\nLocal FDB entries can be rewritten in place by `fdb_delete_local()`, which\nupdates `f-\u003edst` to another port or to `NULL` while keeping the entry\nalive. Several bridge RCU readers inspect `f-\u003edst`, including\n`br_fdb_fillbuf()` through the `brforward_read()` sysfs path.\n\nThese readers currently load `f-\u003edst` multiple times and can therefore\nobserve inconsistent values across the check and later dereference.\nIn `br_fdb_fillbuf()`, this means a concurrent local-FDB update can change\n`f-\u003edst` after the NULL check and before the `port_no` dereference,\nleading to a NULL-ptr-deref.\n\nFix this by taking a single `READ_ONCE()` snapshot of `f-\u003edst` in each\naffected RCU reader and using that snapshot for the rest of the access\nsequence. Also publish the in-place `f-\u003edst` updates in `fdb_delete_local()`\nwith `WRITE_ONCE()` so the readers and writer use matching access patterns."
}
],
"providerMetadata": {
"dateUpdated": "2026-06-19T11:59:23.674Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/c502fa9f094cb03d1d1685c71e2105ab359bc2b8"
},
{
"url": "https://git.kernel.org/stable/c/a6ae4511c07b91f597e461406c6330f0d4ff810e"
},
{
"url": "https://git.kernel.org/stable/c/1406c4e0ed1eaf8a29801ab1163d00fb7ee4359a"
},
{
"url": "https://git.kernel.org/stable/c/0b9e4bbfb7c949151e3acd44ed4aa33614d2e110"
},
{
"url": "https://git.kernel.org/stable/c/81af4137a30c4c2dc694dea8cacb180bd66000ef"
},
{
"url": "https://git.kernel.org/stable/c/5424e678f9b304e148cf5dcc047cffc7a56a3bb5"
},
{
"url": "https://git.kernel.org/stable/c/9a2d9d4e657b23dc21f24cf139e3aeff0b61341f"
},
{
"url": "https://git.kernel.org/stable/c/df4601653201de21b487c3e7fffd464790cab808"
}
],
"title": "net: bridge: use a stable FDB dst snapshot in RCU readers",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-46086",
"datePublished": "2026-05-27T12:58:28.137Z",
"dateReserved": "2026-05-13T15:03:33.096Z",
"dateUpdated": "2026-06-19T11:59:23.674Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-52993 (GCVE-0-2026-52993)
Vulnerability from cvelistv5
Published
2026-06-24 16:29
Modified
2026-08-05 12:32
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
tipc: fix double-free in tipc_buf_append()
tipc_msg_validate() can potentially reallocate the skb it is validating,
freeing the old one. In tipc_buf_append(), it was being called with a
pointer to a local variable which was a copy of the caller's skb
pointer.
If the skb was reallocated and validation subsequently failed, the error
handling path would free the original skb pointer, which had already
been freed, leading to double-free.
Fix this by checking if head now points to a newly allocated reassembled
skb. If it does, reassign *headbuf for later freeing operations.
References
| URL | Tags | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Linux | Linux |
Version: d618d09a68e4eed7a435beb2e355250f6f40664a Version: d618d09a68e4eed7a435beb2e355250f6f40664a Version: d618d09a68e4eed7a435beb2e355250f6f40664a Version: d618d09a68e4eed7a435beb2e355250f6f40664a Version: d618d09a68e4eed7a435beb2e355250f6f40664a Version: d618d09a68e4eed7a435beb2e355250f6f40664a Version: d618d09a68e4eed7a435beb2e355250f6f40664a Version: d618d09a68e4eed7a435beb2e355250f6f40664a |
||
{
"containers": {
"adp": [
{
"affected": [
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:10.2"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 10",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:6.12.0-211.40.1.el10_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:8::nfv"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-553.147.1.rt7.488.el8_10",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:8"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-553.147.1.el8_10",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:9",
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-687.33.1.el9_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:6"
],
"defaultStatus": "unaffected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 6",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "unaffected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "unaffected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat"
}
],
"datePublic": "2026-06-24T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A flaw was found in the Linux kernel\u0027s Transparent Inter-Process Communication (TIPC) module. This vulnerability, a double-free, occurs when the `tipc_buf_append()` function incorrectly handles memory after a socket buffer (skb) reallocation. An attacker could potentially exploit this to cause system instability or a denial of service. In some scenarios, this type of memory corruption could also lead to arbitrary code execution."
}
],
"metrics": [
{
"other": {
"content": {
"namespace": "https://access.redhat.com/security/updates/classification/",
"value": "Important"
},
"type": "Red Hat severity rating"
}
},
{
"cvssV3_1": {
"attackComplexity": "HIGH",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 7,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-763",
"description": "Release of Invalid Pointer or Reference",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-03T12:05:48.382Z",
"orgId": "0b0ca135-0b70-47e7-9f44-1890c2a1c46c",
"shortName": "redhat-SADP"
},
"references": [
{
"tags": [
"vdb-entry",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/security/cve/CVE-2026-52993"
},
{
"name": "RHBZ#2492437",
"tags": [
"issue-tracking",
"x_refsource_REDHAT"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=2492437"
},
{
"tags": [
"x_sadp-csaf-vex"
],
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-52993.json"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:47017"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:49212"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:45115"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:45116"
}
],
"solutions": [
{
"lang": "en",
"value": "RHSA-2026:47017: Red Hat Enterprise Linux AppStream (v. 10), Red Hat Enterprise Linux BaseOS (v. 10), Red Hat Enterprise Linux CodeReady Linux Builder (v. 10), Red Hat Enterprise Linux Real Time (v. 10), Red Hat Enterprise Linux Real Time for NFV (v. 10)"
},
{
"lang": "en",
"value": "RHSA-2026:49212: Red Hat Enterprise Linux AppStream (v. 9), Red Hat Enterprise Linux BaseOS (v. 9), Red Hat Enterprise Linux CodeReady Linux Builder (v. 9), Red Hat Enterprise Linux Real Time (v. 9), Red Hat Enterprise Linux Real Time for NFV (v. 9)"
},
{
"lang": "en",
"value": "RHSA-2026:45115: Red Hat Enterprise Linux BaseOS (v. 8), Red Hat Enterprise Linux CRB (v. 8)"
},
{
"lang": "en",
"value": "RHSA-2026:45116: Red Hat Enterprise Linux NFV (v. 8), Red Hat Enterprise Linux RT (v. 8)"
}
],
"timeline": [
{
"lang": "en",
"time": "2026-06-24T00:00:00.000Z",
"value": "Reported to Red Hat."
},
{
"lang": "en",
"time": "2026-06-24T00:00:00.000Z",
"value": "Made public."
}
],
"title": "kernel: tipc: fix double-free in tipc_buf_append()",
"x_adpType": "supplier",
"x_generator": {
"engine": "sadp-cli 1.0.0"
}
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"net/tipc/msg.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "a438975a6dcdbd70865978c021650d1485586f0b",
"status": "affected",
"version": "d618d09a68e4eed7a435beb2e355250f6f40664a",
"versionType": "git"
},
{
"lessThan": "4ee4deadaae7cb2e3d53af0fc889cf92a73413c0",
"status": "affected",
"version": "d618d09a68e4eed7a435beb2e355250f6f40664a",
"versionType": "git"
},
{
"lessThan": "d3556656c6daebf8def751c7e71d11dd0a180d24",
"status": "affected",
"version": "d618d09a68e4eed7a435beb2e355250f6f40664a",
"versionType": "git"
},
{
"lessThan": "0274f24485fc38032d4093e463dc3ff5c7a667c9",
"status": "affected",
"version": "d618d09a68e4eed7a435beb2e355250f6f40664a",
"versionType": "git"
},
{
"lessThan": "4d104882bc815d4ec666ace9155f5f52715879a6",
"status": "affected",
"version": "d618d09a68e4eed7a435beb2e355250f6f40664a",
"versionType": "git"
},
{
"lessThan": "1d5e589055880fae229e229e1929e087dbe08cf3",
"status": "affected",
"version": "d618d09a68e4eed7a435beb2e355250f6f40664a",
"versionType": "git"
},
{
"lessThan": "29940fff14110ca48c5ccc168d121665b51bb778",
"status": "affected",
"version": "d618d09a68e4eed7a435beb2e355250f6f40664a",
"versionType": "git"
},
{
"lessThan": "d293ca716e7d5dffdaecaf6b9b2f857a33dc3d3a",
"status": "affected",
"version": "d618d09a68e4eed7a435beb2e355250f6f40664a",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"net/tipc/msg.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "4.15"
},
{
"lessThan": "4.15",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.258",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.209",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.175",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.141",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.91",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.33",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.0.*",
"status": "unaffected",
"version": "7.0.10",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.1",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.258",
"versionStartIncluding": "4.15",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.209",
"versionStartIncluding": "4.15",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.175",
"versionStartIncluding": "4.15",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.141",
"versionStartIncluding": "4.15",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.91",
"versionStartIncluding": "4.15",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.33",
"versionStartIncluding": "4.15",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0.10",
"versionStartIncluding": "4.15",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.1",
"versionStartIncluding": "4.15",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\ntipc: fix double-free in tipc_buf_append()\n\ntipc_msg_validate() can potentially reallocate the skb it is validating,\nfreeing the old one. In tipc_buf_append(), it was being called with a\npointer to a local variable which was a copy of the caller\u0027s skb\npointer.\n\nIf the skb was reallocated and validation subsequently failed, the error\nhandling path would free the original skb pointer, which had already\nbeen freed, leading to double-free.\n\nFix this by checking if head now points to a newly allocated reassembled\nskb. If it does, reassign *headbuf for later freeing operations."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:N - TIPC fragment reassembly is reachable from off-node packets via configured TIPC bearers, including the UDP media path over IP. The most severe reasonable deployment is a TIPC UDP cluster service reachable over a network.\nAC:L - A malicious TIPC peer can craft the fragment sequence to inflate the reassembled skb truesize and make the copied inner message fail validation. No attacker-uncontrolled race or rare condition is required.\nPR:N - No target credentials or local account are required to send TIPC packets to an exposed bearer and establish/use the link path. The checks are TIPC discovery/link state checks, not user authentication.\nUI:N - Exploitation is packet-driven and does not require a victim user to open a file, mount anything, or take any other action.\nS:U - The bug corrupts kernel networking memory within the same kernel security authority. It does not cross a separate scope such as guest-to-host or an IOMMU boundary.\nC:H - The double-free of an skb is kernel heap memory corruption and can be leveraged as a use-after-free primitive. Conservatively, this supports high confidentiality impact.\nI:H - The double-free/use-after-free condition can be shaped into kernel memory corruption and potential control-flow or data modification primitives. Conservatively, this supports high integrity impact.\nA:H - Even without full exploitation, double-free of a kernel skb can trigger kernel heap corruption, oops, panic, or networking stack crash. This is high availability impact."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-05T12:32:27.877Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/a438975a6dcdbd70865978c021650d1485586f0b"
},
{
"url": "https://git.kernel.org/stable/c/4ee4deadaae7cb2e3d53af0fc889cf92a73413c0"
},
{
"url": "https://git.kernel.org/stable/c/d3556656c6daebf8def751c7e71d11dd0a180d24"
},
{
"url": "https://git.kernel.org/stable/c/0274f24485fc38032d4093e463dc3ff5c7a667c9"
},
{
"url": "https://git.kernel.org/stable/c/4d104882bc815d4ec666ace9155f5f52715879a6"
},
{
"url": "https://git.kernel.org/stable/c/1d5e589055880fae229e229e1929e087dbe08cf3"
},
{
"url": "https://git.kernel.org/stable/c/29940fff14110ca48c5ccc168d121665b51bb778"
},
{
"url": "https://git.kernel.org/stable/c/d293ca716e7d5dffdaecaf6b9b2f857a33dc3d3a"
}
],
"title": "tipc: fix double-free in tipc_buf_append()",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-52993",
"datePublished": "2026-06-24T16:29:06.475Z",
"dateReserved": "2026-06-09T07:44:35.377Z",
"dateUpdated": "2026-08-05T12:32:27.877Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-53006 (GCVE-0-2026-53006)
Vulnerability from cvelistv5
Published
2026-06-24 16:29
Modified
2026-08-05 12:32
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible UAF in icmpv6_rcv()
Caching saddr and daddr before pskb_pull() is problematic
since skb->head can change.
Remove these temporary variables:
- We only access &ipv6_hdr(skb)->saddr and &ipv6_hdr(skb)->daddr
when net_dbg_ratelimited() is called in the slow path.
- Avoid potential future misuse after pskb_pull() call.
References
| URL | Tags | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Linux | Linux |
Version: 4b3418fba0fe819197e3359d5ddbef84ba2c59de Version: 4b3418fba0fe819197e3359d5ddbef84ba2c59de Version: 4b3418fba0fe819197e3359d5ddbef84ba2c59de Version: 4b3418fba0fe819197e3359d5ddbef84ba2c59de Version: 4b3418fba0fe819197e3359d5ddbef84ba2c59de Version: 4b3418fba0fe819197e3359d5ddbef84ba2c59de Version: 4b3418fba0fe819197e3359d5ddbef84ba2c59de Version: 4b3418fba0fe819197e3359d5ddbef84ba2c59de |
||
{
"containers": {
"adp": [
{
"affected": [
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:10.2"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 10",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:6.12.0-211.40.1.el10_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:8::nfv"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-553.148.1.rt7.489.el8_10",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:8"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-553.148.1.el8_10",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:9",
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-687.30.1.el9_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:6"
],
"defaultStatus": "unaffected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 6",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "unaffected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "unaffected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat"
}
],
"datePublic": "2026-06-24T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A flaw was found in the Linux kernel\u0027s IPv6 (Internet Protocol version 6) implementation. This vulnerability, a Use-After-Free (UAF) error, occurs due to incorrect caching of network packet addresses before a memory operation. An attacker could potentially exploit this flaw to cause memory corruption, which may lead to a denial of service or, in some scenarios, arbitrary code execution."
}
],
"metrics": [
{
"other": {
"content": {
"namespace": "https://access.redhat.com/security/updates/classification/",
"value": "Important"
},
"type": "Red Hat severity rating"
}
},
{
"cvssV3_1": {
"attackComplexity": "HIGH",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 7,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-825",
"description": "Expired Pointer Dereference",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-28T12:04:41.905Z",
"orgId": "0b0ca135-0b70-47e7-9f44-1890c2a1c46c",
"shortName": "redhat-SADP"
},
"references": [
{
"tags": [
"vdb-entry",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/security/cve/CVE-2026-53006"
},
{
"name": "RHBZ#2492363",
"tags": [
"issue-tracking",
"x_refsource_REDHAT"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=2492363"
},
{
"tags": [
"x_sadp-csaf-vex"
],
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-53006.json"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:47017"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:45192"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:47011"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:47010"
}
],
"solutions": [
{
"lang": "en",
"value": "RHSA-2026:47017: Red Hat Enterprise Linux AppStream (v. 10), Red Hat Enterprise Linux BaseOS (v. 10), Red Hat Enterprise Linux CodeReady Linux Builder (v. 10), Red Hat Enterprise Linux Real Time (v. 10), Red Hat Enterprise Linux Real Time for NFV (v. 10)"
},
{
"lang": "en",
"value": "RHSA-2026:45192: Red Hat Enterprise Linux AppStream (v. 9), Red Hat Enterprise Linux BaseOS (v. 9), Red Hat Enterprise Linux CodeReady Linux Builder (v. 9), Red Hat Enterprise Linux Real Time (v. 9), Red Hat Enterprise Linux Real Time for NFV (v. 9)"
},
{
"lang": "en",
"value": "RHSA-2026:47011: Red Hat Enterprise Linux BaseOS (v. 8), Red Hat Enterprise Linux CRB (v. 8)"
},
{
"lang": "en",
"value": "RHSA-2026:47010: Red Hat Enterprise Linux NFV (v. 8), Red Hat Enterprise Linux RT (v. 8)"
}
],
"timeline": [
{
"lang": "en",
"time": "2026-06-24T00:00:00.000Z",
"value": "Reported to Red Hat."
},
{
"lang": "en",
"time": "2026-06-24T00:00:00.000Z",
"value": "Made public."
}
],
"title": "kernel: ipv6: fix possible UAF in icmpv6_rcv()",
"x_adpType": "supplier",
"x_generator": {
"engine": "sadp-cli 1.0.0"
}
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"net/ipv6/icmp.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "7bff2c8fe5c35ae58bf73104f53db3676e6e5d94",
"status": "affected",
"version": "4b3418fba0fe819197e3359d5ddbef84ba2c59de",
"versionType": "git"
},
{
"lessThan": "aff0f28f5be803de2452ce702631c021fcd9ce8a",
"status": "affected",
"version": "4b3418fba0fe819197e3359d5ddbef84ba2c59de",
"versionType": "git"
},
{
"lessThan": "38bdbc897c0d83a3e2b925a51b69420f1feba29a",
"status": "affected",
"version": "4b3418fba0fe819197e3359d5ddbef84ba2c59de",
"versionType": "git"
},
{
"lessThan": "0069813e6ca9309eca78022bcb3aeb1e9ef90a12",
"status": "affected",
"version": "4b3418fba0fe819197e3359d5ddbef84ba2c59de",
"versionType": "git"
},
{
"lessThan": "1e1f0f89ee4692a64be3f3707ff8ac1ae57b03e7",
"status": "affected",
"version": "4b3418fba0fe819197e3359d5ddbef84ba2c59de",
"versionType": "git"
},
{
"lessThan": "7c66b368c6ff453f99cb39d84af93e908e51eef2",
"status": "affected",
"version": "4b3418fba0fe819197e3359d5ddbef84ba2c59de",
"versionType": "git"
},
{
"lessThan": "085e31a811ef234ef8c3e219c4636dfebfe7e10f",
"status": "affected",
"version": "4b3418fba0fe819197e3359d5ddbef84ba2c59de",
"versionType": "git"
},
{
"lessThan": "f996edd7615e686ada141b7f3395025729ff8ccb",
"status": "affected",
"version": "4b3418fba0fe819197e3359d5ddbef84ba2c59de",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"net/ipv6/icmp.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "4.4"
},
{
"lessThan": "4.4",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.258",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.209",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.175",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.141",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.91",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.33",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.0.*",
"status": "unaffected",
"version": "7.0.10",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.1",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.258",
"versionStartIncluding": "4.4",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.209",
"versionStartIncluding": "4.4",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.175",
"versionStartIncluding": "4.4",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.141",
"versionStartIncluding": "4.4",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.91",
"versionStartIncluding": "4.4",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.33",
"versionStartIncluding": "4.4",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0.10",
"versionStartIncluding": "4.4",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.1",
"versionStartIncluding": "4.4",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nipv6: fix possible UAF in icmpv6_rcv()\n\nCaching saddr and daddr before pskb_pull() is problematic\nsince skb-\u003ehead can change.\n\nRemove these temporary variables:\n\n- We only access \u0026ipv6_hdr(skb)-\u003esaddr and \u0026ipv6_hdr(skb)-\u003edaddr\n when net_dbg_ratelimited() is called in the slow path.\n\n- Avoid potential future misuse after pskb_pull() call."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:N - icmpv6_rcv() is reached by inbound IPv6 ICMPv6 packets through the normal network receive path. A remote IPv6 peer can send crafted ICMPv6 packets to a reachable host without local access.\nAC:L - The attacker can craft the ICMPv6 type, checksum, and fragmentation/non-linear skb layout needed to reach the stale-pointer path after pskb_pull(). There is no attacker-uncontrolled race required.\nPR:N - Inbound ICMPv6 processing occurs before any user authentication or privilege check. No local account or kernel capability is required to send the triggering packets.\nUI:N - No victim user action is required. The kernel processes the packets automatically on receive.\nS:U - The impact is within the vulnerable kernel/network stack security authority. This is not a guest-to-host escape or other cross-scope boundary bypass.\nC:H - The bug is a use-after-free of IPv6 address pointers into skb-\u003ehead after pskb_pull() can reallocate and free that buffer. Under the required conservative kernel guidance, UAF is treated as high confidentiality impact due potential freed-kernel-memory disclosure.\nI:H - This is a kernel heap use-after-free in a remote packet-processing path. Under the required conservative kernel guidance, UAF is treated as high integrity impact because heap reuse/spraying can make UAFs exploitable beyond the immediate stale read.\nA:H - A remotely triggerable kernel UAF can produce an oops/panic or repeated fault, especially in debug/KASAN or hardened deployments. Repeated crafted packets can therefore cause high availability impact."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-05T12:32:35.427Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/7bff2c8fe5c35ae58bf73104f53db3676e6e5d94"
},
{
"url": "https://git.kernel.org/stable/c/aff0f28f5be803de2452ce702631c021fcd9ce8a"
},
{
"url": "https://git.kernel.org/stable/c/38bdbc897c0d83a3e2b925a51b69420f1feba29a"
},
{
"url": "https://git.kernel.org/stable/c/0069813e6ca9309eca78022bcb3aeb1e9ef90a12"
},
{
"url": "https://git.kernel.org/stable/c/1e1f0f89ee4692a64be3f3707ff8ac1ae57b03e7"
},
{
"url": "https://git.kernel.org/stable/c/7c66b368c6ff453f99cb39d84af93e908e51eef2"
},
{
"url": "https://git.kernel.org/stable/c/085e31a811ef234ef8c3e219c4636dfebfe7e10f"
},
{
"url": "https://git.kernel.org/stable/c/f996edd7615e686ada141b7f3395025729ff8ccb"
}
],
"title": "ipv6: fix possible UAF in icmpv6_rcv()",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-53006",
"datePublished": "2026-06-24T16:29:17.691Z",
"dateReserved": "2026-06-09T07:44:35.377Z",
"dateUpdated": "2026-08-05T12:32:35.427Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-46135 (GCVE-0-2026-46135)
Vulnerability from cvelistv5
Published
2026-05-28 09:35
Modified
2026-08-05 12:29
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: fix race between ICReq handling and queue teardown
nvmet_tcp_handle_icreq() updates queue->state after sending an
Initialization Connection Response (ICResp), but it does so without
serializing against target-side queue teardown.
If an NVMe/TCP host sends an Initialization Connection Request
(ICReq) and immediately closes the connection, target-side teardown
may start in softirq context before io_work drains the already
buffered ICReq. In that case, nvmet_tcp_schedule_release_queue()
sets queue->state to NVMET_TCP_Q_DISCONNECTING and drops the queue
reference under state_lock.
If io_work later processes that ICReq, nvmet_tcp_handle_icreq() can
still overwrite the state back to NVMET_TCP_Q_LIVE. That defeats the
DISCONNECTING-state guard in nvmet_tcp_schedule_release_queue() and
allows a later socket state change to re-enter teardown and issue a
second kref_put() on an already released queue.
The ICResp send failure path has the same problem. If teardown has
already moved the queue to DISCONNECTING, a send error can still
overwrite the state with NVMET_TCP_Q_FAILED, again reopening the
window for a second teardown path to drop the queue reference.
Fix this by serializing both post-send state transitions with
state_lock and bailing out if teardown has already started.
Use -ESHUTDOWN as an internal sentinel for that bail-out path rather
than propagating it as a transport error like -ECONNRESET. Keep
nvmet_tcp_socket_error() setting rcv_state to NVMET_TCP_RECV_ERR before
honoring that sentinel so receive-side parsing stays quiesced until the
existing release path completes.
References
| URL | Tags | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Linux | Linux |
Version: 872d26a391da92ed8f0c0f5cb5fef428067b7f30 Version: 872d26a391da92ed8f0c0f5cb5fef428067b7f30 Version: 872d26a391da92ed8f0c0f5cb5fef428067b7f30 Version: 872d26a391da92ed8f0c0f5cb5fef428067b7f30 Version: 872d26a391da92ed8f0c0f5cb5fef428067b7f30 Version: 872d26a391da92ed8f0c0f5cb5fef428067b7f30 Version: 872d26a391da92ed8f0c0f5cb5fef428067b7f30 Version: 872d26a391da92ed8f0c0f5cb5fef428067b7f30 |
||
{
"containers": {
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/nvme/target/tcp.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "b7dd4d27aa70bd98bb10572310e913668baf6a65",
"status": "affected",
"version": "872d26a391da92ed8f0c0f5cb5fef428067b7f30",
"versionType": "git"
},
{
"lessThan": "9c63cf80895a70eb4fcfcaa725bb1ac9ae76f02b",
"status": "affected",
"version": "872d26a391da92ed8f0c0f5cb5fef428067b7f30",
"versionType": "git"
},
{
"lessThan": "6f96dea4819d122737b217ea16660d255abbf8c6",
"status": "affected",
"version": "872d26a391da92ed8f0c0f5cb5fef428067b7f30",
"versionType": "git"
},
{
"lessThan": "5f0b95ef68ab9afba75b20eebf436130f80c161a",
"status": "affected",
"version": "872d26a391da92ed8f0c0f5cb5fef428067b7f30",
"versionType": "git"
},
{
"lessThan": "49891c8fe0cb43fbbe480da1cdccfbbaeb820cb3",
"status": "affected",
"version": "872d26a391da92ed8f0c0f5cb5fef428067b7f30",
"versionType": "git"
},
{
"lessThan": "67e1aaf93b495c2f10bc8a5fbba575fbb7f449b6",
"status": "affected",
"version": "872d26a391da92ed8f0c0f5cb5fef428067b7f30",
"versionType": "git"
},
{
"lessThan": "dcfe4d1f7960e7d1c01642318f3aae1a604f8508",
"status": "affected",
"version": "872d26a391da92ed8f0c0f5cb5fef428067b7f30",
"versionType": "git"
},
{
"lessThan": "5293a8882c549fab4a878bc76b0b6c951f980a61",
"status": "affected",
"version": "872d26a391da92ed8f0c0f5cb5fef428067b7f30",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/nvme/target/tcp.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "5.0"
},
{
"lessThan": "5.0",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.261",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.212",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.178",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.144",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.88",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.30",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.0.*",
"status": "unaffected",
"version": "7.0.7",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.1",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.261",
"versionStartIncluding": "5.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.212",
"versionStartIncluding": "5.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.178",
"versionStartIncluding": "5.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.144",
"versionStartIncluding": "5.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.88",
"versionStartIncluding": "5.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.30",
"versionStartIncluding": "5.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0.7",
"versionStartIncluding": "5.0",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.1",
"versionStartIncluding": "5.0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnvmet-tcp: fix race between ICReq handling and queue teardown\n\nnvmet_tcp_handle_icreq() updates queue-\u003estate after sending an\nInitialization Connection Response (ICResp), but it does so without\nserializing against target-side queue teardown.\n\nIf an NVMe/TCP host sends an Initialization Connection Request\n(ICReq) and immediately closes the connection, target-side teardown\nmay start in softirq context before io_work drains the already\nbuffered ICReq. In that case, nvmet_tcp_schedule_release_queue()\nsets queue-\u003estate to NVMET_TCP_Q_DISCONNECTING and drops the queue\nreference under state_lock.\n\nIf io_work later processes that ICReq, nvmet_tcp_handle_icreq() can\nstill overwrite the state back to NVMET_TCP_Q_LIVE. That defeats the\nDISCONNECTING-state guard in nvmet_tcp_schedule_release_queue() and\nallows a later socket state change to re-enter teardown and issue a\nsecond kref_put() on an already released queue.\n\nThe ICResp send failure path has the same problem. If teardown has\nalready moved the queue to DISCONNECTING, a send error can still\noverwrite the state with NVMET_TCP_Q_FAILED, again reopening the\nwindow for a second teardown path to drop the queue reference.\n\nFix this by serializing both post-send state transitions with\nstate_lock and bailing out if teardown has already started.\n\nUse -ESHUTDOWN as an internal sentinel for that bail-out path rather\nthan propagating it as a transport error like -ECONNRESET. Keep\nnvmet_tcp_socket_error() setting rcv_state to NVMET_TCP_RECV_ERR before\nhonoring that sentinel so receive-side parsing stays quiesced until the\nexisting release path completes."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:N - The bug is in the NVMe-over-TCP target driver, which processes PDUs from remote network peers on a listening TCP port (default 4420); the race is triggered by sending an ICReq and closing the connection \u2014 purely remote network operations.\nAC:L - The attacker controls both sides of the race (sends the ICReq, then immediately closes the connection) and can open unlimited connections to reliably win the timing window between softirq teardown and io_work processing, so success does not depend on conditions beyond the attacker\u0027s control.\nPR:N - The ICReq is the first PDU of the NVMe/TCP connection handshake and is handled entirely pre-authentication; an unauthenticated remote attacker need only connect and send an ICReq, with no credentials required in the default non-TLS configuration.\nUI:N - The attacker initiates the connection and triggers the race entirely on their own; no action from any local user or victim is required.\nS:U - The corruption is confined to the kernel\u0027s own memory and security authority; there is no crossing of a VM, IOMMU, or sandbox boundary.\nC:H - The double kref_put produces a use-after-free of the queue object, and per kernel UAF guidance this gives the attacker control over freed object contents, enabling arbitrary kernel memory disclosure.\nI:H - The use-after-free / double-free enables heap spraying to reclaim the freed allocation, providing a write primitive and potential control-flow hijack, so integrity impact is high.\nA:H - The refcount underflow and resulting use-after-free reliably cause kernel oops/panic, taking down the target system."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-05T12:29:58.184Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/b7dd4d27aa70bd98bb10572310e913668baf6a65"
},
{
"url": "https://git.kernel.org/stable/c/9c63cf80895a70eb4fcfcaa725bb1ac9ae76f02b"
},
{
"url": "https://git.kernel.org/stable/c/6f96dea4819d122737b217ea16660d255abbf8c6"
},
{
"url": "https://git.kernel.org/stable/c/5f0b95ef68ab9afba75b20eebf436130f80c161a"
},
{
"url": "https://git.kernel.org/stable/c/49891c8fe0cb43fbbe480da1cdccfbbaeb820cb3"
},
{
"url": "https://git.kernel.org/stable/c/67e1aaf93b495c2f10bc8a5fbba575fbb7f449b6"
},
{
"url": "https://git.kernel.org/stable/c/dcfe4d1f7960e7d1c01642318f3aae1a604f8508"
},
{
"url": "https://git.kernel.org/stable/c/5293a8882c549fab4a878bc76b0b6c951f980a61"
}
],
"title": "nvmet-tcp: fix race between ICReq handling and queue teardown",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-46135",
"datePublished": "2026-05-28T09:35:49.828Z",
"dateReserved": "2026-05-13T15:03:33.099Z",
"dateUpdated": "2026-08-05T12:29:58.184Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-57231 (GCVE-0-2026-57231)
Vulnerability from cvelistv5
Published
2026-06-26 16:29
Modified
2026-06-27 02:41
Severity ?
VLAI Severity ?
EPSS score ?
CWE
Summary
Podman is a tool for managing OCI containers and pods. From 1.8.1 until 5.8.4, a container image that contains a environment variable with just a key and no value can trick podman into passing that variable from the host into the container. This is made worse by the fact that using an asterisk (*) will cause podman to pass all host variables into the container. So essentially a malicious image can exfiltrate all podman environment variables that are set in the session from where the container is launched. This vulnerability is fixed in 5.8.4 and 6.0.0.
References
| URL | Tags | |
|---|---|---|
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| podman-container-tools | podman |
Version: >= 1.8.1, < 5.8.4 |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-57231",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-06-27T02:41:47.348825Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-06-27T02:41:58.574Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"product": "podman",
"vendor": "podman-container-tools",
"versions": [
{
"status": "affected",
"version": "\u003e= 1.8.1, \u003c 5.8.4"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "Podman is a tool for managing OCI containers and pods. From 1.8.1 until 5.8.4, a container image that contains a environment variable with just a key and no value can trick podman into passing that variable from the host into the container. This is made worse by the fact that using an asterisk (*) will cause podman to pass all host variables into the container. So essentially a malicious image can exfiltrate all podman environment variables that are set in the session from where the container is launched. This vulnerability is fixed in 5.8.4 and 6.0.0."
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "NONE",
"baseScore": 7.5,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N",
"version": "3.1"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-200",
"description": "CWE-200: Exposure of Sensitive Information to an Unauthorized Actor",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-668",
"description": "CWE-668: Exposure of Resource to Wrong Sphere",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-06-26T16:29:02.092Z",
"orgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"shortName": "GitHub_M"
},
"references": [
{
"name": "https://github.com/podman-container-tools/podman/security/advisories/GHSA-4hq8-gpf5-8p68",
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://github.com/podman-container-tools/podman/security/advisories/GHSA-4hq8-gpf5-8p68"
},
{
"name": "https://github.com/podman-container-tools/podman/commit/6c431b73dbf8e4b20b778644d7a80caebdb75050",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/podman-container-tools/podman/commit/6c431b73dbf8e4b20b778644d7a80caebdb75050"
}
],
"source": {
"advisory": "GHSA-4hq8-gpf5-8p68",
"discovery": "UNKNOWN"
},
"title": "Podman: Malformed Image can trick podman run into leaking host environment variables into the container"
}
},
"cveMetadata": {
"assignerOrgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"assignerShortName": "GitHub_M",
"cveId": "CVE-2026-57231",
"datePublished": "2026-06-26T16:29:02.092Z",
"dateReserved": "2026-06-24T02:21:33.811Z",
"dateUpdated": "2026-06-27T02:41:58.574Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-46116 (GCVE-0-2026-46116)
Vulnerability from cvelistv5
Published
2026-05-28 09:35
Modified
2026-08-25 12:05
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete
KASAN reproduces a slab-use-after-free in __xfrm_state_delete()'s
hlist_del_rcu calls under syzkaller load on linux-6.12.y stable
(reproduced on 6.12.47, also reachable via the same code path on
torvalds/master and on the ipsec tree). Nine unique signatures cluster
in the xfrm_state lifecycle, the load-bearing one being:
BUG: KASAN: slab-use-after-free in __hlist_del include/linux/list.h:990 [inline]
BUG: KASAN: slab-use-after-free in hlist_del_rcu include/linux/rculist.h:516 [inline]
BUG: KASAN: slab-use-after-free in __xfrm_state_delete net/xfrm/xfrm_state.c
Write of size 8 at addr ffff8881198bcb70 by task kworker/u8:9/435
Workqueue: netns cleanup_net
Call Trace:
__hlist_del / hlist_del_rcu
__xfrm_state_delete
xfrm_state_delete
xfrm_state_flush
xfrm_state_fini
ops_exit_list
cleanup_net
The other observed signatures hit the same slab object from
__xfrm_state_lookup, xfrm_alloc_spi, __xfrm_state_insert and an OOB
write variant of __xfrm_state_delete, all on the byseq/byspi
hash chains.
__xfrm_state_delete() guards its byseq and byspi unhashes with
value-based predicates:
if (x->km.seq)
hlist_del_rcu(&x->byseq);
if (x->id.spi)
hlist_del_rcu(&x->byspi);
while everywhere else in the file (e.g. state_cache, state_cache_input)
the safer hlist_unhashed() check is used. xfrm_alloc_spi() sets
x->id.spi = newspi inside xfrm_state_lock and then immediately inserts
into byspi, but a path that observes x->id.spi != 0 outside of
xfrm_state_lock can still skip-or-hit the byspi unhash inconsistently
with whether x is actually on the list. The same holds for x->km.seq
versus byseq, and the bydst/bysrc unhashes have no predicate at all,
so a second __xfrm_state_delete() on the same object writes through
LIST_POISON pprev.
The defensive change here:
- Use hlist_del_init_rcu() instead of hlist_del_rcu() on bydst,
bysrc, byseq and byspi so a second deletion is a no-op rather
than a write through LIST_POISON pprev. The byseq/byspi nodes
are already initialised in xfrm_state_alloc().
- Test hlist_unhashed() rather than the value predicate for
byseq/byspi, so the unhash decision tracks list state rather than
mutable scalar fields.
Empirical verification: applied this patch on top of v6.12.47, rebuilt,
and re-ran the same syzkaller harness for 1h16m on a previously-crashy
configuration that produced ~100 hits each of slab-use-after-free
Read in xfrm_alloc_spi / Read in __xfrm_state_lookup / Write in
__xfrm_state_delete. After the patch, 7.1M execs across 32 VMs at
~1550 exec/sec produced zero xfrm_state UAF/OOB hits. /proc/slabinfo
confirms the xfrm_state slab is actively allocated and freed during
the run (~143 KiB resident), so the fuzzer is still exercising those
code paths -- they just no longer crash.
Reproduction:
- Linux 6.12.47 x86_64 + KASAN_GENERIC + KASAN_INLINE + KCOV
- syzkaller @ 746545b8b1e4c3a128db8652b340d3df90ce61db
- 32 QEMU/KVM VMs x 2 vCPU on AWS c5.metal bare metal
- 9 unique signatures collected in ~9h, all within xfrm_state
lifecycle
References
| URL | Tags | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Linux | Linux |
Version: 7b4dc3600e4877178ba94c7fbf7e520421378aa6 Version: 7b4dc3600e4877178ba94c7fbf7e520421378aa6 Version: 7b4dc3600e4877178ba94c7fbf7e520421378aa6 Version: 7b4dc3600e4877178ba94c7fbf7e520421378aa6 Version: 7b4dc3600e4877178ba94c7fbf7e520421378aa6 Version: 7b4dc3600e4877178ba94c7fbf7e520421378aa6 Version: 7b4dc3600e4877178ba94c7fbf7e520421378aa6 Version: 7b4dc3600e4877178ba94c7fbf7e520421378aa6 |
||
{
"containers": {
"adp": [
{
"affected": [
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:10.2"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 10",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:6.12.0-211.37.1.el10_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux_eus:10.0"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 10.0 Extended Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:6.12.0-55.88.1.el10_0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_extras_rt_els:7"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 7 Extended Lifecycle Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:3.10.0-1160.156.1.rt56.1308.el7",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_els:7"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 7 Extended Lifecycle Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:3.10.0-1160.156.1.el7",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:8::nfv"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-553.144.1.rt7.485.el8_10",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:8"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-553.144.1.el8_10",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_aus:8.4"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.4 Advanced Mission Critical Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-305.199.1.el8_4",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_eus_long_life:8.4"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.4 Extended Update Support Long-Life Add-On",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-305.199.1.el8_4",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_aus:8.6"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.6 Advanced Mission Critical Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-372.204.1.el8_6",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_eus_long_life:8.6"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.6 Extended Update Support Long-Life Add-On",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-372.204.1.el8_6",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_tus:8.8"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.8 Telecommunications Update Service",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-477.156.1.el8_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_e4s:8.8"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.8 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-477.156.1.el8_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:9",
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-687.22.1.el9_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_e4s:9.2"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9.2 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-284.183.1.el9_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_e4s:9.2::nfv"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 9.2 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-284.183.1.rt14.468.el9_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_e4s:9.4"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9.4 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-427.139.1.el9_4",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_eus:9.6"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9.6 Extended Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-570.129.1.el9_6",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:6"
],
"defaultStatus": "unknown",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 6",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat"
}
],
"datePublic": "2026-05-28T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A flaw was found in the Linux kernel\u0027s `xfrm` (IPSec framework) subsystem. This vulnerability, a use-after-free, occurs when the system incorrectly manages memory related to security policies, specifically during the deletion of `xfrm_state` lists. An attacker with local access could exploit this flaw by triggering specific operations, leading to memory corruption. This could cause the system to become unstable, resulting in crashes or a Denial of Service (DoS), and potentially allow for unauthorized access to sensitive information or increased privileges."
}
],
"metrics": [
{
"other": {
"content": {
"namespace": "https://access.redhat.com/security/updates/classification/",
"value": "Important"
},
"type": "Red Hat severity rating"
}
},
{
"cvssV3_1": {
"attackComplexity": "HIGH",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 7,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-763",
"description": "Release of Invalid Pointer or Reference",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-25T12:05:58.654Z",
"orgId": "0b0ca135-0b70-47e7-9f44-1890c2a1c46c",
"shortName": "redhat-SADP"
},
"references": [
{
"tags": [
"vdb-entry",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/security/cve/CVE-2026-46116"
},
{
"name": "RHBZ#2482523",
"tags": [
"issue-tracking",
"x_refsource_REDHAT"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=2482523"
},
{
"tags": [
"x_sadp-csaf-vex"
],
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-46116.json"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:41235"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:41234"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:39371"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:42919"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:47739"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:43231"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:44385"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:36018"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:59143"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:39179"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:59146"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:47633"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:49033"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:47869"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:59142"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:59147"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:59145"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:59148"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:59149"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:39180"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:47632"
}
],
"solutions": [
{
"lang": "en",
"value": "RHSA-2026:41235: Red Hat Enterprise Linux Server (v. 7 ELS), Red Hat Enterprise Linux Server Optional (v. 7 ELS)"
},
{
"lang": "en",
"value": "RHSA-2026:41234: Red Hat Enterprise Linux for Real Time (v. 7 ELS)"
},
{
"lang": "en",
"value": "RHSA-2026:39371: Red Hat Enterprise Linux AppStream EUS (v. 10.0), Red Hat Enterprise Linux BaseOS EUS (v. 10.0), Red Hat Enterprise Linux CodeReady Linux Builder EUS (v. 10.0), Red Hat Enterprise Linux Real Time EUS (v. 10.0), Red Hat Enterprise Linux Real Time for NFV EUS (v. 10.0)"
},
{
"lang": "en",
"value": "RHSA-2026:42919: Red Hat Enterprise Linux AppStream (v. 10), Red Hat Enterprise Linux BaseOS (v. 10), Red Hat Enterprise Linux CodeReady Linux Builder (v. 10), Red Hat Enterprise Linux Real Time (v. 10), Red Hat Enterprise Linux Real Time for NFV (v. 10)"
},
{
"lang": "en",
"value": "RHSA-2026:47739: Red Hat Enterprise Linux AppStream E4S (v.9.2), Red Hat Enterprise Linux BaseOS E4S (v.9.2)"
},
{
"lang": "en",
"value": "RHSA-2026:43231: Red Hat Enterprise Linux AppStream E4S (v.9.4), Red Hat Enterprise Linux BaseOS E4S (v.9.4), Red Hat Enterprise Linux Real Time E4S (v.9.4), Red Hat Enterprise Linux Real Time for NFV E4S (v.9.4)"
},
{
"lang": "en",
"value": "RHSA-2026:44385: Red Hat CodeReady Linux Builder EUS (v.9.6), Red Hat Enterprise Linux AppStream EUS (v.9.6), Red Hat Enterprise Linux BaseOS EUS (v.9.6), Red Hat Enterprise Linux Real Time EUS (v.9.6), Red Hat Enterprise Linux Real Time for NFV EUS (v.9.6)"
},
{
"lang": "en",
"value": "RHSA-2026:36018: Red Hat Enterprise Linux AppStream (v. 9), Red Hat Enterprise Linux BaseOS (v. 9), Red Hat Enterprise Linux CodeReady Linux Builder (v. 9), Red Hat Enterprise Linux Real Time (v. 9), Red Hat Enterprise Linux Real Time for NFV (v. 9)"
},
{
"lang": "en",
"value": "RHSA-2026:59143: Red Hat Enterprise Linux BaseOS (v. 10)"
},
{
"lang": "en",
"value": "RHSA-2026:39179: Red Hat Enterprise Linux BaseOS (v. 8), Red Hat Enterprise Linux CRB (v. 8)"
},
{
"lang": "en",
"value": "RHSA-2026:59146: Red Hat Enterprise Linux BaseOS (v. 8)"
},
{
"lang": "en",
"value": "RHSA-2026:47633: Red Hat Enterprise Linux BaseOS AUS (v.8.4), Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.4)"
},
{
"lang": "en",
"value": "RHSA-2026:49033: Red Hat Enterprise Linux BaseOS AUS (v.8.6), Red Hat Enterprise Linux BaseOS EUS EXTENSION (v.8.6)"
},
{
"lang": "en",
"value": "RHSA-2026:47869: Red Hat Enterprise Linux BaseOS E4S (v.8.8), Red Hat Enterprise Linux BaseOS TUS (v.8.8)"
},
{
"lang": "en",
"value": "RHSA-2026:59142: Red Hat Enterprise Linux BaseOS E4S (v.8.8)"
},
{
"lang": "en",
"value": "RHSA-2026:59147: Red Hat Enterprise Linux BaseOS E4S (v.9.2)"
},
{
"lang": "en",
"value": "RHSA-2026:59145: Red Hat Enterprise Linux BaseOS E4S (v.9.4)"
},
{
"lang": "en",
"value": "RHSA-2026:59148: Red Hat Enterprise Linux BaseOS EUS (v.9.6)"
},
{
"lang": "en",
"value": "RHSA-2026:59149: Red Hat Enterprise Linux BaseOS (v. 9)"
},
{
"lang": "en",
"value": "RHSA-2026:39180: Red Hat Enterprise Linux NFV (v. 8), Red Hat Enterprise Linux RT (v. 8)"
},
{
"lang": "en",
"value": "RHSA-2026:47632: Red Hat Enterprise Linux Real Time E4S (v.9.2), Red Hat Enterprise Linux Real Time for NFV E4S (v.9.2)"
}
],
"timeline": [
{
"lang": "en",
"time": "2026-05-28T00:00:00.000Z",
"value": "Reported to Red Hat."
},
{
"lang": "en",
"time": "2026-05-28T00:00:00.000Z",
"value": "Made public."
}
],
"title": "kernel: xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete",
"x_adpType": "supplier",
"x_generator": {
"engine": "sadp-cli 1.0.0"
}
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"net/xfrm/xfrm_state.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "6b4dc3181b4bfc5f5fc33ab33b1dc6e15759f4b6",
"status": "affected",
"version": "7b4dc3600e4877178ba94c7fbf7e520421378aa6",
"versionType": "git"
},
{
"lessThan": "3943fcad7694a7d0b15aeabe7d3cc2a2eb8e92e8",
"status": "affected",
"version": "7b4dc3600e4877178ba94c7fbf7e520421378aa6",
"versionType": "git"
},
{
"lessThan": "2c617848ae6e4f07a3e397f604208c293bbecacc",
"status": "affected",
"version": "7b4dc3600e4877178ba94c7fbf7e520421378aa6",
"versionType": "git"
},
{
"lessThan": "b4a53add2fa8f1b5aa17d4c5686c320785fab182",
"status": "affected",
"version": "7b4dc3600e4877178ba94c7fbf7e520421378aa6",
"versionType": "git"
},
{
"lessThan": "26edb0a3c99f9d958c212be68b21f1221614dcf0",
"status": "affected",
"version": "7b4dc3600e4877178ba94c7fbf7e520421378aa6",
"versionType": "git"
},
{
"lessThan": "4980162de555cb838f1a189ce7d2cbf5d2e7b050",
"status": "affected",
"version": "7b4dc3600e4877178ba94c7fbf7e520421378aa6",
"versionType": "git"
},
{
"lessThan": "a2e2d08fb070fab4947447171f1c4e3ca5a188e5",
"status": "affected",
"version": "7b4dc3600e4877178ba94c7fbf7e520421378aa6",
"versionType": "git"
},
{
"lessThan": "14acf9652e5690de3c7486c6db5fb8dafd0a32a3",
"status": "affected",
"version": "7b4dc3600e4877178ba94c7fbf7e520421378aa6",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"net/xfrm/xfrm_state.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "2.6.19"
},
{
"lessThan": "2.6.19",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.261",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.210",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.176",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.140",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.88",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.30",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.0.*",
"status": "unaffected",
"version": "7.0.7",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.1",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.10.261",
"versionStartIncluding": "2.6.19",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "5.15.210",
"versionStartIncluding": "2.6.19",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.176",
"versionStartIncluding": "2.6.19",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.140",
"versionStartIncluding": "2.6.19",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.88",
"versionStartIncluding": "2.6.19",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.30",
"versionStartIncluding": "2.6.19",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0.7",
"versionStartIncluding": "2.6.19",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.1",
"versionStartIncluding": "2.6.19",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nxfrm: defensively unhash xfrm_state lists in __xfrm_state_delete\n\nKASAN reproduces a slab-use-after-free in __xfrm_state_delete()\u0027s\nhlist_del_rcu calls under syzkaller load on linux-6.12.y stable\n(reproduced on 6.12.47, also reachable via the same code path on\ntorvalds/master and on the ipsec tree). Nine unique signatures cluster\nin the xfrm_state lifecycle, the load-bearing one being:\n\n BUG: KASAN: slab-use-after-free in __hlist_del include/linux/list.h:990 [inline]\n BUG: KASAN: slab-use-after-free in hlist_del_rcu include/linux/rculist.h:516 [inline]\n BUG: KASAN: slab-use-after-free in __xfrm_state_delete net/xfrm/xfrm_state.c\n Write of size 8 at addr ffff8881198bcb70 by task kworker/u8:9/435\n\n Workqueue: netns cleanup_net\n Call Trace:\n __hlist_del / hlist_del_rcu\n __xfrm_state_delete\n xfrm_state_delete\n xfrm_state_flush\n xfrm_state_fini\n ops_exit_list\n cleanup_net\n\nThe other observed signatures hit the same slab object from\n__xfrm_state_lookup, xfrm_alloc_spi, __xfrm_state_insert and an OOB\nwrite variant of __xfrm_state_delete, all on the byseq/byspi\nhash chains.\n\n__xfrm_state_delete() guards its byseq and byspi unhashes with\nvalue-based predicates:\n\n\tif (x-\u003ekm.seq)\n\t\thlist_del_rcu(\u0026x-\u003ebyseq);\n\tif (x-\u003eid.spi)\n\t\thlist_del_rcu(\u0026x-\u003ebyspi);\n\nwhile everywhere else in the file (e.g. state_cache, state_cache_input)\nthe safer hlist_unhashed() check is used. xfrm_alloc_spi() sets\nx-\u003eid.spi = newspi inside xfrm_state_lock and then immediately inserts\ninto byspi, but a path that observes x-\u003eid.spi != 0 outside of\nxfrm_state_lock can still skip-or-hit the byspi unhash inconsistently\nwith whether x is actually on the list. The same holds for x-\u003ekm.seq\nversus byseq, and the bydst/bysrc unhashes have no predicate at all,\nso a second __xfrm_state_delete() on the same object writes through\nLIST_POISON pprev.\n\nThe defensive change here:\n\n - Use hlist_del_init_rcu() instead of hlist_del_rcu() on bydst,\n bysrc, byseq and byspi so a second deletion is a no-op rather\n than a write through LIST_POISON pprev. The byseq/byspi nodes\n are already initialised in xfrm_state_alloc().\n - Test hlist_unhashed() rather than the value predicate for\n byseq/byspi, so the unhash decision tracks list state rather than\n mutable scalar fields.\n\nEmpirical verification: applied this patch on top of v6.12.47, rebuilt,\nand re-ran the same syzkaller harness for 1h16m on a previously-crashy\nconfiguration that produced ~100 hits each of slab-use-after-free\nRead in xfrm_alloc_spi / Read in __xfrm_state_lookup / Write in\n__xfrm_state_delete. After the patch, 7.1M execs across 32 VMs at\n~1550 exec/sec produced zero xfrm_state UAF/OOB hits. /proc/slabinfo\nconfirms the xfrm_state slab is actively allocated and freed during\nthe run (~143 KiB resident), so the fuzzer is still exercising those\ncode paths -- they just no longer crash.\n\nReproduction:\n\n - Linux 6.12.47 x86_64 + KASAN_GENERIC + KASAN_INLINE + KCOV\n - syzkaller @ 746545b8b1e4c3a128db8652b340d3df90ce61db\n - 32 QEMU/KVM VMs x 2 vCPU on AWS c5.metal bare metal\n - 9 unique signatures collected in ~9h, all within xfrm_state\n lifecycle"
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 7.8,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:L - The xfrm_state lifecycle is reached through the NETLINK_XFRM and PF_KEY socket interfaces (local syscalls); the freed object and the race are set up by the attacker\u0027s local state-management operations, not by remote packets.\nAC:L - Although it is a race/double-free, the attacker controls all racing actors (concurrent DELSA/ALLOCSPI/FLUSHSA threads plus namespace teardown they trigger) and can repeat indefinitely; syzkaller hit it ~100 times per hour, so a targeted trigger is reliable.\nPR:L - All xfrm operations require CAP_NET_ADMIN, but the check is against the netns user namespace, so an unprivileged user obtains it via `unshare -Urn` and exercises the per-netns xfrm_state path.\nUI:N - The attacker performs all state creation, deletion and namespace teardown itself; no victim action is required.\nS:U - The corruption is confined to the kernel\u0027s own slab memory within the same security authority; it is not a hypervisor or IOMMU boundary crossing.\nC:H - The slab-use-after-free gives the attacker control over freed xfrm_state contents and read-UAF sites (xfrm_alloc_spi/__xfrm_state_lookup), enabling arbitrary kernel memory disclosure.\nI:H - The UAF/OOB writes an attacker-influenced 8-byte list pointer into freed/adjacent slab memory, providing a heap write primitive leveragable for arbitrary write and control-flow hijack.\nA:H - The slab-use-after-free and out-of-bounds writes corrupt kernel hash chains, reliably causing oops/panic and bringing the kernel down."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-05T12:29:48.359Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/6b4dc3181b4bfc5f5fc33ab33b1dc6e15759f4b6"
},
{
"url": "https://git.kernel.org/stable/c/3943fcad7694a7d0b15aeabe7d3cc2a2eb8e92e8"
},
{
"url": "https://git.kernel.org/stable/c/2c617848ae6e4f07a3e397f604208c293bbecacc"
},
{
"url": "https://git.kernel.org/stable/c/b4a53add2fa8f1b5aa17d4c5686c320785fab182"
},
{
"url": "https://git.kernel.org/stable/c/26edb0a3c99f9d958c212be68b21f1221614dcf0"
},
{
"url": "https://git.kernel.org/stable/c/4980162de555cb838f1a189ce7d2cbf5d2e7b050"
},
{
"url": "https://git.kernel.org/stable/c/a2e2d08fb070fab4947447171f1c4e3ca5a188e5"
},
{
"url": "https://git.kernel.org/stable/c/14acf9652e5690de3c7486c6db5fb8dafd0a32a3"
}
],
"title": "xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-46116",
"datePublished": "2026-05-28T09:35:30.689Z",
"dateReserved": "2026-05-13T15:03:33.098Z",
"dateUpdated": "2026-08-25T12:05:58.654Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-31488 (GCVE-0-2026-31488)
Vulnerability from cvelistv5
Published
2026-04-22 13:54
Modified
2026-08-17 12:04
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Do not skip unrelated mode changes in DSC validation
Starting with commit 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in
atomic check"), amdgpu resets the CRTC state mode_changed flag to false when
recomputing the DSC configuration results in no timing change for a particular
stream.
However, this is incorrect in scenarios where a change in MST/DSC configuration
happens in the same KMS commit as another (unrelated) mode change. For example,
the integrated panel of a laptop may be configured differently (e.g., HDR
enabled/disabled) depending on whether external screens are attached. In this
case, plugging in external DP-MST screens may result in the mode_changed flag
being dropped incorrectly for the integrated panel if its DSC configuration
did not change during precomputation in pre_validate_dsc().
At this point, however, dm_update_crtc_state() has already created new streams
for CRTCs with DSC-independent mode changes. In turn,
amdgpu_dm_commit_streams() will never release the old stream, resulting in a
memory leak. amdgpu_dm_atomic_commit_tail() will never acquire a reference to
the new stream either, which manifests as a use-after-free when the stream gets
disabled later on:
BUG: KASAN: use-after-free in dc_stream_release+0x25/0x90 [amdgpu]
Write of size 4 at addr ffff88813d836524 by task kworker/9:9/29977
Workqueue: events drm_mode_rmfb_work_fn
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0xa0
print_address_description.constprop.0+0x88/0x320
? dc_stream_release+0x25/0x90 [amdgpu]
print_report+0xfc/0x1ff
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x225/0x4e0
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_report+0xe1/0x180
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_check_range+0x125/0x200
dc_stream_release+0x25/0x90 [amdgpu]
dc_state_destruct+0x14d/0x5c0 [amdgpu]
dc_state_release.part.0+0x4e/0x130 [amdgpu]
dm_atomic_destroy_state+0x3f/0x70 [amdgpu]
drm_atomic_state_default_clear+0x8ee/0xf30
? drm_mode_object_put.part.0+0xb1/0x130
__drm_atomic_state_free+0x15c/0x2d0
atomic_remove_fb+0x67e/0x980
Since there is no reliable way of figuring out whether a CRTC has unrelated
mode changes pending at the time of DSC validation, remember the value of the
mode_changed flag from before the point where a CRTC was marked as potentially
affected by a change in DSC configuration. Reset the mode_changed flag to this
earlier value instead in pre_validate_dsc().
(cherry picked from commit cc7c7121ae082b7b82891baa7280f1ff2608f22b)
References
| URL | Tags | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Linux | Linux |
Version: 17ce8a6907f77b7ac97ddaa071d8a1f6e06ce85b Version: 17ce8a6907f77b7ac97ddaa071d8a1f6e06ce85b Version: 17ce8a6907f77b7ac97ddaa071d8a1f6e06ce85b Version: 17ce8a6907f77b7ac97ddaa071d8a1f6e06ce85b Version: 17ce8a6907f77b7ac97ddaa071d8a1f6e06ce85b Version: 17ce8a6907f77b7ac97ddaa071d8a1f6e06ce85b |
||
{
"containers": {
"adp": [
{
"affected": [
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:10.2"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 10",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:6.12.0-211.46.1.el10_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux_eus:10.0"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 10.0 Extended Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:6.12.0-55.98.1.el10_0",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:8::nfv"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-553.136.1.rt7.477.el8_10",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:8"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-553.136.1.el8_10",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_tus:8.8"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.8 Telecommunications Update Service",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-477.156.1.el8_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:rhel_e4s:8.8"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8.8 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:4.18.0-477.156.1.el8_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:9",
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-687.19.1.el9_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_e4s:9.2"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9.2 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-284.183.1.el9_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_e4s:9.2::nfv"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 9.2 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-284.183.1.rt14.468.el9_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_e4s:9.4"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9.4 Update Services for SAP Solutions",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-427.139.1.el9_4",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:rhel_eus:9.6"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9.6 Extended Update Support",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-570.129.1.el9_6",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:6"
],
"defaultStatus": "unaffected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 6",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "unaffected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "unaffected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat"
}
],
"datePublic": "2026-04-22T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A flaw was found in the Linux kernel\u0027s AMD display component. This vulnerability arises from incorrect validation of display mode changes during Display Stream Compression (DSC) processing. A local attacker could exploit this by initiating specific display configuration changes, which may lead to a memory leak and a use-after-free error. This could result in system crashes, denial of service, or potentially allow the attacker to gain elevated privileges."
}
],
"metrics": [
{
"other": {
"content": {
"namespace": "https://access.redhat.com/security/updates/classification/",
"value": "Important"
},
"type": "Red Hat severity rating"
}
},
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 7.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-1288",
"description": "Improper Validation of Consistency within Input",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-17T12:04:49.431Z",
"orgId": "0b0ca135-0b70-47e7-9f44-1890c2a1c46c",
"shortName": "redhat-SADP"
},
"references": [
{
"tags": [
"vdb-entry",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/security/cve/CVE-2026-31488"
},
{
"name": "RHBZ#2460619",
"tags": [
"issue-tracking",
"x_refsource_REDHAT"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=2460619"
},
{
"tags": [
"x_sadp-csaf-vex"
],
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-31488.json"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:55445"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:53330"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:47739"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:43231"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:44385"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:30848"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:27353"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:47869"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:27354"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:47632"
}
],
"solutions": [
{
"lang": "en",
"value": "RHSA-2026:55445: Red Hat Enterprise Linux AppStream EUS (v. 10.0), Red Hat Enterprise Linux BaseOS EUS (v. 10.0), Red Hat Enterprise Linux CodeReady Linux Builder EUS (v. 10.0), Red Hat Enterprise Linux Real Time EUS (v. 10.0), Red Hat Enterprise Linux Real Time for NFV EUS (v. 10.0)"
},
{
"lang": "en",
"value": "RHSA-2026:53330: Red Hat Enterprise Linux AppStream (v. 10), Red Hat Enterprise Linux BaseOS (v. 10), Red Hat Enterprise Linux CodeReady Linux Builder (v. 10), Red Hat Enterprise Linux Real Time (v. 10), Red Hat Enterprise Linux Real Time for NFV (v. 10)"
},
{
"lang": "en",
"value": "RHSA-2026:47739: Red Hat Enterprise Linux AppStream E4S (v.9.2), Red Hat Enterprise Linux BaseOS E4S (v.9.2)"
},
{
"lang": "en",
"value": "RHSA-2026:43231: Red Hat Enterprise Linux AppStream E4S (v.9.4), Red Hat Enterprise Linux BaseOS E4S (v.9.4), Red Hat Enterprise Linux Real Time E4S (v.9.4), Red Hat Enterprise Linux Real Time for NFV E4S (v.9.4)"
},
{
"lang": "en",
"value": "RHSA-2026:44385: Red Hat CodeReady Linux Builder EUS (v.9.6), Red Hat Enterprise Linux AppStream EUS (v.9.6), Red Hat Enterprise Linux BaseOS EUS (v.9.6), Red Hat Enterprise Linux Real Time EUS (v.9.6), Red Hat Enterprise Linux Real Time for NFV EUS (v.9.6)"
},
{
"lang": "en",
"value": "RHSA-2026:30848: Red Hat Enterprise Linux AppStream (v. 9), Red Hat Enterprise Linux BaseOS (v. 9), Red Hat Enterprise Linux CodeReady Linux Builder (v. 9), Red Hat Enterprise Linux Real Time (v. 9), Red Hat Enterprise Linux Real Time for NFV (v. 9)"
},
{
"lang": "en",
"value": "RHSA-2026:27353: Red Hat Enterprise Linux BaseOS (v. 8), Red Hat Enterprise Linux CRB (v. 8)"
},
{
"lang": "en",
"value": "RHSA-2026:47869: Red Hat Enterprise Linux BaseOS E4S (v.8.8), Red Hat Enterprise Linux BaseOS TUS (v.8.8)"
},
{
"lang": "en",
"value": "RHSA-2026:27354: Red Hat Enterprise Linux NFV (v. 8), Red Hat Enterprise Linux RT (v. 8)"
},
{
"lang": "en",
"value": "RHSA-2026:47632: Red Hat Enterprise Linux Real Time E4S (v.9.2), Red Hat Enterprise Linux Real Time for NFV E4S (v.9.2)"
}
],
"timeline": [
{
"lang": "en",
"time": "2026-04-22T00:00:00.000Z",
"value": "Reported to Red Hat."
},
{
"lang": "en",
"time": "2026-04-22T00:00:00.000Z",
"value": "Made public."
}
],
"title": "kernel: drm/amd/display: Do not skip unrelated mode changes in DSC validation",
"workarounds": [
{
"lang": "en",
"value": "Mitigation for this issue is either not available or the currently available options do not meet the Red Hat Product Security criteria comprising ease of use and deployment, applicability to widespread installation base, or stability."
}
],
"x_adpType": "supplier",
"x_generator": {
"engine": "sadp-cli 1.0.0"
}
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c",
"drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h",
"drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "da1d0ed31e9802fd99384f43cc63678a5a11cb41",
"status": "affected",
"version": "17ce8a6907f77b7ac97ddaa071d8a1f6e06ce85b",
"versionType": "git"
},
{
"lessThan": "21159d8b335a6b9f44cbb506733013a902ae2da4",
"status": "affected",
"version": "17ce8a6907f77b7ac97ddaa071d8a1f6e06ce85b",
"versionType": "git"
},
{
"lessThan": "10862e344b4d6434642a48c87d765813fc0b0ba7",
"status": "affected",
"version": "17ce8a6907f77b7ac97ddaa071d8a1f6e06ce85b",
"versionType": "git"
},
{
"lessThan": "8a5edc97fd9c6415ff2eff872748439a97e3c3d8",
"status": "affected",
"version": "17ce8a6907f77b7ac97ddaa071d8a1f6e06ce85b",
"versionType": "git"
},
{
"lessThan": "111208b5b7ebcdadb3f922cc52d8425f0fa91b33",
"status": "affected",
"version": "17ce8a6907f77b7ac97ddaa071d8a1f6e06ce85b",
"versionType": "git"
},
{
"lessThan": "aed3d041ab061ec8a64f50a3edda0f4db7280025",
"status": "affected",
"version": "17ce8a6907f77b7ac97ddaa071d8a1f6e06ce85b",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c",
"drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h",
"drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "5.18"
},
{
"lessThan": "5.18",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.175",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.140",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.80",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.21",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.19.*",
"status": "unaffected",
"version": "6.19.11",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.0",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.1.175",
"versionStartIncluding": "5.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.6.140",
"versionStartIncluding": "5.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.12.80",
"versionStartIncluding": "5.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.21",
"versionStartIncluding": "5.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.19.11",
"versionStartIncluding": "5.18",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0",
"versionStartIncluding": "5.18",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\ndrm/amd/display: Do not skip unrelated mode changes in DSC validation\n\nStarting with commit 17ce8a6907f7 (\"drm/amd/display: Add dsc pre-validation in\natomic check\"), amdgpu resets the CRTC state mode_changed flag to false when\nrecomputing the DSC configuration results in no timing change for a particular\nstream.\n\nHowever, this is incorrect in scenarios where a change in MST/DSC configuration\nhappens in the same KMS commit as another (unrelated) mode change. For example,\nthe integrated panel of a laptop may be configured differently (e.g., HDR\nenabled/disabled) depending on whether external screens are attached. In this\ncase, plugging in external DP-MST screens may result in the mode_changed flag\nbeing dropped incorrectly for the integrated panel if its DSC configuration\ndid not change during precomputation in pre_validate_dsc().\n\nAt this point, however, dm_update_crtc_state() has already created new streams\nfor CRTCs with DSC-independent mode changes. In turn,\namdgpu_dm_commit_streams() will never release the old stream, resulting in a\nmemory leak. amdgpu_dm_atomic_commit_tail() will never acquire a reference to\nthe new stream either, which manifests as a use-after-free when the stream gets\ndisabled later on:\n\nBUG: KASAN: use-after-free in dc_stream_release+0x25/0x90 [amdgpu]\nWrite of size 4 at addr ffff88813d836524 by task kworker/9:9/29977\n\nWorkqueue: events drm_mode_rmfb_work_fn\nCall Trace:\n \u003cTASK\u003e\n dump_stack_lvl+0x6e/0xa0\n print_address_description.constprop.0+0x88/0x320\n ? dc_stream_release+0x25/0x90 [amdgpu]\n print_report+0xfc/0x1ff\n ? srso_alias_return_thunk+0x5/0xfbef5\n ? __virt_addr_valid+0x225/0x4e0\n ? dc_stream_release+0x25/0x90 [amdgpu]\n kasan_report+0xe1/0x180\n ? dc_stream_release+0x25/0x90 [amdgpu]\n kasan_check_range+0x125/0x200\n dc_stream_release+0x25/0x90 [amdgpu]\n dc_state_destruct+0x14d/0x5c0 [amdgpu]\n dc_state_release.part.0+0x4e/0x130 [amdgpu]\n dm_atomic_destroy_state+0x3f/0x70 [amdgpu]\n drm_atomic_state_default_clear+0x8ee/0xf30\n ? drm_mode_object_put.part.0+0xb1/0x130\n __drm_atomic_state_free+0x15c/0x2d0\n atomic_remove_fb+0x67e/0x980\n\nSince there is no reliable way of figuring out whether a CRTC has unrelated\nmode changes pending at the time of DSC validation, remember the value of the\nmode_changed flag from before the point where a CRTC was marked as potentially\naffected by a change in DSC configuration. Reset the mode_changed flag to this\nearlier value instead in pre_validate_dsc().\n\n(cherry picked from commit cc7c7121ae082b7b82891baa7280f1ff2608f22b)"
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 7.8,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:L - The vulnerable path is reached through local DRM/KMS ioctls, especially DRM_IOCTL_MODE_ATOMIC on an amdgpu primary device, not through network input.\nAC:L - On an affected AMD display setup with DSC/MST-capable outputs, the bad state transition is deterministically triggered by a crafted atomic modeset combining MST/DSC changes with an unrelated mode change.\nPR:L - The attacker must be a local DRM client with access to the primary node and current DRM master capability; this is attainable by an unprivileged graphical-session user and does not require real root.\nUI:N - Once the attacker has the local DRM access, exploitation is driven by ioctls and later framebuffer/CRTC teardown without requiring a separate victim action.\nS:U - The corruption occurs within the kernel display driver and affects the same kernel security authority, with no VM escape or cross-scope boundary involved.\nC:H - The bug creates a use-after-free of a kernel dc_stream_state object, and kernel UAF memory corruption is defensibly capable of exposing arbitrary kernel memory.\nI:H - The observed failure is a write through kref_put to a freed object, and a reclaimable kernel UAF write can be shaped into memory corruption or control-flow compromise.\nA:H - The commit documents a KASAN use-after-free in dc_stream_release, and this class of kernel memory corruption can reliably crash or destabilize the system."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-05T12:23:01.480Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/da1d0ed31e9802fd99384f43cc63678a5a11cb41"
},
{
"url": "https://git.kernel.org/stable/c/21159d8b335a6b9f44cbb506733013a902ae2da4"
},
{
"url": "https://git.kernel.org/stable/c/10862e344b4d6434642a48c87d765813fc0b0ba7"
},
{
"url": "https://git.kernel.org/stable/c/8a5edc97fd9c6415ff2eff872748439a97e3c3d8"
},
{
"url": "https://git.kernel.org/stable/c/111208b5b7ebcdadb3f922cc52d8425f0fa91b33"
},
{
"url": "https://git.kernel.org/stable/c/aed3d041ab061ec8a64f50a3edda0f4db7280025"
}
],
"title": "drm/amd/display: Do not skip unrelated mode changes in DSC validation",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-31488",
"datePublished": "2026-04-22T13:54:12.963Z",
"dateReserved": "2026-03-09T15:48:24.101Z",
"dateUpdated": "2026-08-17T12:04:49.431Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-53281 (GCVE-0-2026-53281)
Vulnerability from cvelistv5
Published
2026-06-26 19:40
Modified
2026-08-05 12:34
Severity ?
VLAI Severity ?
EPSS score ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Avoid NULL pointer dereference or refcount corruption
Commit 60f030f7418d ("iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE")
fixed a NULL pointer dereference in an unlikely situation partly.
If dev_pasid is not found in the dev_pasids list, it remains NULL.
However, the teardown operations are executed unconditionally, this lead
to a NULL pointer dereference or refcount corruption.
If the domain was never attached to this IOMMU, info will be NULL, which
would cause an immediate dereference when checking --info->refcnt.
Even if info is not NULL, decrementing the refcount without having removed
a valid PASID might unbalance the count. This could lead to premature
dropping of the refcount to 0, potentially causing a use-after-free for the
remaining active devices sharing the domain.
Fix it by returning early if dev_pasid is NULL, before executing the
teardown operations.
Issue found by AI review and suggested by Kevin Tian.
https://sashiko.dev/#/patchset/20260421031347.1408890-1-zhenzhong.duan%40intel.com
References
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Linux | Linux |
Version: 60f030f7418d3f1d94f2fb207fe3080e1844630b Version: 60f030f7418d3f1d94f2fb207fe3080e1844630b Version: 60f030f7418d3f1d94f2fb207fe3080e1844630b Version: 68ec78beb4a3fb0877cbaaf49758c85410c05977 Version: df96876be3b064aefc493f760e0639765d13ed0d Version: 6.12.57 ≤ Version: 6.13.3 ≤ |
||
{
"containers": {
"adp": [
{
"affected": [
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:10.2"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 10",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:6.12.0-211.40.1.el10_2",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/a:redhat:enterprise_linux:9",
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat",
"versions": [
{
"lessThan": "*",
"status": "unaffected",
"version": "0:5.14.0-687.31.1.el9_8",
"versionType": "rpm"
}
]
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:6"
],
"defaultStatus": "unaffected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 6",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "unaffected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:7"
],
"defaultStatus": "unaffected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 7",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:8"
],
"defaultStatus": "unaffected",
"packageName": "kernel",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:8"
],
"defaultStatus": "unaffected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 8",
"vendor": "Red Hat"
},
{
"collectionURL": "https://access.redhat.com/downloads/content/package-browser/",
"cpes": [
"cpe:/o:redhat:enterprise_linux:9"
],
"defaultStatus": "affected",
"packageName": "kernel-rt",
"product": "Red Hat Enterprise Linux 9",
"vendor": "Red Hat"
}
],
"datePublic": "2026-06-26T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "A flaw was found in the Linux kernel\u0027s Input-Output Memory Management Unit (IOMMU) virtualized direct memory access (VT-d) component. This vulnerability occurs when the system attempts to perform cleanup operations without a valid device identifier, leading to a null pointer dereference or incorrect management of resource references. An attacker with local access could exploit this to cause a system crash, resulting in a denial of service (DoS)."
}
],
"metrics": [
{
"other": {
"content": {
"namespace": "https://access.redhat.com/security/updates/classification/",
"value": "Moderate"
},
"type": "Red Hat severity rating"
}
},
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 5.5,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-476",
"description": "NULL Pointer Dereference",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-29T12:04:49.598Z",
"orgId": "0b0ca135-0b70-47e7-9f44-1890c2a1c46c",
"shortName": "redhat-SADP"
},
"references": [
{
"tags": [
"vdb-entry",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/security/cve/CVE-2026-53281"
},
{
"name": "RHBZ#2493728",
"tags": [
"issue-tracking",
"x_refsource_REDHAT"
],
"url": "https://bugzilla.redhat.com/show_bug.cgi?id=2493728"
},
{
"tags": [
"x_sadp-csaf-vex"
],
"url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-53281.json"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:47017"
},
{
"tags": [
"vendor-advisory",
"x_refsource_REDHAT"
],
"url": "https://access.redhat.com/errata/RHSA-2026:47040"
}
],
"solutions": [
{
"lang": "en",
"value": "RHSA-2026:47017: Red Hat Enterprise Linux AppStream (v. 10), Red Hat Enterprise Linux BaseOS (v. 10), Red Hat Enterprise Linux CodeReady Linux Builder (v. 10), Red Hat Enterprise Linux Real Time (v. 10), Red Hat Enterprise Linux Real Time for NFV (v. 10)"
},
{
"lang": "en",
"value": "RHSA-2026:47040: Red Hat Enterprise Linux AppStream (v. 9), Red Hat Enterprise Linux BaseOS (v. 9), Red Hat Enterprise Linux CodeReady Linux Builder (v. 9), Red Hat Enterprise Linux Real Time (v. 9), Red Hat Enterprise Linux Real Time for NFV (v. 9)"
}
],
"timeline": [
{
"lang": "en",
"time": "2026-06-26T00:00:00.000Z",
"value": "Reported to Red Hat."
},
{
"lang": "en",
"time": "2026-06-26T00:00:00.000Z",
"value": "Made public."
}
],
"title": "kernel: iommu/vt-d: Avoid NULL pointer dereference or refcount corruption",
"workarounds": [
{
"lang": "en",
"value": "Mitigation for this issue is either not available or the currently available options do not meet the Red Hat Product Security criteria comprising ease of use and deployment, applicability to widespread installation base, or stability."
}
],
"x_adpType": "supplier",
"x_generator": {
"engine": "sadp-cli 1.0.0"
}
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/iommu/intel/iommu.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "9022cb9ac0c2a72a57fa8ebf92ac74f953ca0153",
"status": "affected",
"version": "60f030f7418d3f1d94f2fb207fe3080e1844630b",
"versionType": "git"
},
{
"lessThan": "cdfe3c9f2c9e28a8651ee463c88ad191ced2f840",
"status": "affected",
"version": "60f030f7418d3f1d94f2fb207fe3080e1844630b",
"versionType": "git"
},
{
"lessThan": "79ea2feb917b05366b49d85573c9c5331f043b2c",
"status": "affected",
"version": "60f030f7418d3f1d94f2fb207fe3080e1844630b",
"versionType": "git"
},
{
"status": "affected",
"version": "68ec78beb4a3fb0877cbaaf49758c85410c05977",
"versionType": "git"
},
{
"status": "affected",
"version": "df96876be3b064aefc493f760e0639765d13ed0d",
"versionType": "git"
},
{
"lessThan": "6.13",
"status": "affected",
"version": "6.12.57",
"versionType": "semver"
},
{
"lessThan": "6.14",
"status": "affected",
"version": "6.13.3",
"versionType": "semver"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/iommu/intel/iommu.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "6.14"
},
{
"lessThan": "6.14",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.33",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.0.*",
"status": "unaffected",
"version": "7.0.10",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.1",
"versionType": "original_commit_for_fix"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "6.18.33",
"versionStartIncluding": "6.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.0.10",
"versionStartIncluding": "6.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionEndExcluding": "7.1",
"versionStartIncluding": "6.14",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "6.12.57",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"versionStartIncluding": "6.13.3",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\niommu/vt-d: Avoid NULL pointer dereference or refcount corruption\n\nCommit 60f030f7418d (\"iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE\")\nfixed a NULL pointer dereference in an unlikely situation partly.\n\nIf dev_pasid is not found in the dev_pasids list, it remains NULL.\nHowever, the teardown operations are executed unconditionally, this lead\nto a NULL pointer dereference or refcount corruption.\n\nIf the domain was never attached to this IOMMU, info will be NULL, which\nwould cause an immediate dereference when checking --info-\u003erefcnt.\n\nEven if info is not NULL, decrementing the refcount without having removed\na valid PASID might unbalance the count. This could lead to premature\ndropping of the refcount to 0, potentially causing a use-after-free for the\nremaining active devices sharing the domain.\n\nFix it by returning early if dev_pasid is NULL, before executing the\nteardown operations.\n\nIssue found by AI review and suggested by Kevin Tian.\nhttps://sashiko.dev/#/patchset/20260421031347.1408890-1-zhenzhong.duan%40intel.com"
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 8.8,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H",
"version": "3.1"
},
"scenarios": [
{
"lang": "en",
"value": "AV:L - The vulnerable VT-d PASID teardown path is reached through local IOMMU/VFIO/SVA device-management operations such as iommufd/VFIO PASID attach, detach, replace, or device reset recovery. It is not reachable by network packets or adjacent radio protocols.\nAC:L - The relevant paths are normal serialized attach/detach/reset flows and do not require winning an attacker-uncontrolled race. A PASID-capable Intel IOMMU device and suitable VFIO/SVA setup are prerequisites for the affected subsystem, but triggering the vulnerable teardown is otherwise straightforward in that environment.\nPR:L - The attacker needs local access to a PASID-capable VFIO/iommufd or SVA-capable accelerator device node, which can be delegated to an unprivileged userspace process such as QEMU or accelerator clients. It does not inherently require real root in the initial namespace once device access is granted.\nUI:N - No separate victim action is required after the attacker controls the local device-management file descriptors. The attacker can initiate the attach/detach/close/reset-triggering sequence directly.\nS:C - The corruption is in IOMMU/PASID domain bookkeeping that enforces DMA isolation for devices. Premature domain refcount teardown can affect resources outside the intended device/DMA translation boundary.\nC:H - Although one failure mode is a NULL dereference, the fix explicitly identifies refcount corruption that can prematurely free domain metadata and create a use-after-free for remaining active devices. Under the required conservative scoring rule, that memory corruption is treated as capable of enabling high-impact information disclosure.\nI:H - The same refcount corruption/use-after-free in IOMMU domain metadata can plausibly be exploited for kernel memory corruption or DMA isolation manipulation. Under the required conservative scoring rule, this supports high integrity impact.\nA:H - If the domain was never attached to the IOMMU, `domain_detach_iommu()` can immediately dereference NULL and crash the kernel. The refcount corruption path can also lead to use-after-free crashes, so availability impact is high."
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-05T12:34:54.806Z",
"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"shortName": "Linux"
},
"references": [
{
"url": "https://git.kernel.org/stable/c/9022cb9ac0c2a72a57fa8ebf92ac74f953ca0153"
},
{
"url": "https://git.kernel.org/stable/c/cdfe3c9f2c9e28a8651ee463c88ad191ced2f840"
},
{
"url": "https://git.kernel.org/stable/c/79ea2feb917b05366b49d85573c9c5331f043b2c"
}
],
"title": "iommu/vt-d: Avoid NULL pointer dereference or refcount corruption",
"x_generator": {
"engine": "bippy-1.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"assignerShortName": "Linux",
"cveId": "CVE-2026-53281",
"datePublished": "2026-06-26T19:40:43.040Z",
"dateReserved": "2026-06-09T07:44:35.396Z",
"dateUpdated": "2026-08-05T12:34:54.806Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
Loading…
Loading…
Sightings
| Author | Source | Type | Date |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
- Confirmed: The vulnerability is confirmed from an analyst perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
- Patched: This vulnerability was successfully patched by the user reporting the sighting.
- Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
- Not confirmed: The user expresses doubt about the veracity of the vulnerability.
- Not patched: This vulnerability was not successfully patched by the user reporting the sighting.
Loading…
Loading…