CVE-2024-50226 (GCVE-0-2024-50226)

Vulnerability from cvelistv5 – Published: 2024-11-09 10:14 – Updated: 2026-10-30 12:19
VLAI
Title
cxl/port: Fix use-after-free, permit out-of-order decoder shutdown
Summary
In the Linux kernel, the following vulnerability has been resolved: cxl/port: Fix use-after-free, permit out-of-order decoder shutdown In support of investigating an initialization failure report [1], cxl_test was updated to register mock memory-devices after the mock root-port/bus device had been registered. That led to cxl_test crashing with a use-after-free bug with the following signature: cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1 cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1 cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0 1) cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1 [..] cxld_unregister: cxl decoder14.0: cxl_region_decode_reset: cxl_region region3: mock_decoder_reset: cxl_port port3: decoder3.0 reset 2) mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1 cxl_endpoint_decoder_release: cxl decoder14.0: [..] cxld_unregister: cxl decoder7.0: 3) cxl_region_decode_reset: cxl_region region3: Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI [..] RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core] [..] Call Trace: <TASK> cxl_region_decode_reset+0x69/0x190 [cxl_core] cxl_region_detach+0xe8/0x210 [cxl_core] cxl_decoder_kill_region+0x27/0x40 [cxl_core] cxld_unregister+0x5d/0x60 [cxl_core] At 1) a region has been established with 2 endpoint decoders (7.0 and 14.0). Those endpoints share a common switch-decoder in the topology (3.0). At teardown, 2), decoder14.0 is the first to be removed and hits the "out of order reset case" in the switch decoder. The effect though is that region3 cleanup is aborted leaving it in-tact and referencing decoder14.0. At 3) the second attempt to teardown region3 trips over the stale decoder14.0 object which has long since been deleted. The fix here is to recognize that the CXL specification places no mandate on in-order shutdown of switch-decoders, the driver enforces in-order allocation, and hardware enforces in-order commit. So, rather than fail and leave objects dangling, always remove them. In support of making cxl_region_decode_reset() always succeed, cxl_region_invalidate_memregion() failures are turned into warnings. Crashing the kernel is ok there since system integrity is at risk if caches cannot be managed around physical address mutation events like CXL region destruction. A new device_for_each_child_reverse_from() is added to cleanup port->commit_end after all dependent decoders have been disabled. In other words if decoders are allocated 0->1->2 and disabled 1->2->0 then port->commit_end only decrements from 2 after 2 has been disabled, and it decrements all the way to zero since 1 was disabled previously.
SSVC
Exploitation: none Automatable: no Technical Impact: total
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2024-12-11 14:28 UTC
CWE
Assigner
Linux CNA
Impacted products
Vendor Product Version
Linux Linux Affected: 176baefb2eb5d7a3ddebe3ff803db1fce44574b5 , < 3ecd2b229f5e42b36b5acf0e82510a70a632f041 (git)
Affected: 176baefb2eb5d7a3ddebe3ff803db1fce44574b5 , < 8e1b52c15c81106456437f8e49575040e489e355 (git)
Affected: 176baefb2eb5d7a3ddebe3ff803db1fce44574b5 , < 78c8454fdce0eeee962be004eb6d99860c80dad1 (git)
Affected: 176baefb2eb5d7a3ddebe3ff803db1fce44574b5 , < 101c268bd2f37e965a5468353e62d154db38838e (git)
Create a notification for this product.
Linux Linux Affected: 6.0
Unaffected: 0 , < 6.0 (semver)
Unaffected: 6.1.191 , ≤ 6.1.* (semver)
Unaffected: 6.6.60 , ≤ 6.6.* (semver)
Unaffected: 6.11.7 , ≤ 6.11.* (semver)
Unaffected: 6.12 , ≤ * (original_commit_for_fix)
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "cvssV3_1": {
              "attackComplexity": "LOW",
              "attackVector": "LOCAL",
              "availabilityImpact": "HIGH",
              "baseScore": 7.8,
              "baseSeverity": "HIGH",
              "confidentialityImpact": "HIGH",
              "integrityImpact": "HIGH",
              "privilegesRequired": "LOW",
              "scope": "UNCHANGED",
              "userInteraction": "NONE",
              "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
              "version": "3.1"
            }
          },
          {
            "other": {
              "content": {
                "id": "CVE-2024-50226",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "total"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2024-12-11T14:28:17.687131Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "problemTypes": [
          {
            "descriptions": [
              {
                "cweId": "CWE-416",
                "description": "CWE-416 Use After Free",
                "lang": "en",
                "type": "CWE"
              }
            ]
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2024-12-11T14:58:32.714Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/base/core.c",
            "drivers/cxl/core/hdm.c",
            "drivers/cxl/core/region.c",
            "drivers/cxl/cxl.h",
            "include/linux/device.h",
            "tools/testing/cxl/test/cxl.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "3ecd2b229f5e42b36b5acf0e82510a70a632f041",
              "status": "affected",
              "version": "176baefb2eb5d7a3ddebe3ff803db1fce44574b5",
              "versionType": "git"
            },
            {
              "lessThan": "8e1b52c15c81106456437f8e49575040e489e355",
              "status": "affected",
              "version": "176baefb2eb5d7a3ddebe3ff803db1fce44574b5",
              "versionType": "git"
            },
            {
              "lessThan": "78c8454fdce0eeee962be004eb6d99860c80dad1",
              "status": "affected",
              "version": "176baefb2eb5d7a3ddebe3ff803db1fce44574b5",
              "versionType": "git"
            },
            {
              "lessThan": "101c268bd2f37e965a5468353e62d154db38838e",
              "status": "affected",
              "version": "176baefb2eb5d7a3ddebe3ff803db1fce44574b5",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/base/core.c",
            "drivers/cxl/core/hdm.c",
            "drivers/cxl/core/region.c",
            "drivers/cxl/cxl.h",
            "include/linux/device.h",
            "tools/testing/cxl/test/cxl.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.0"
            },
            {
              "lessThan": "6.0",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.1.*",
              "status": "unaffected",
              "version": "6.1.191",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.6.*",
              "status": "unaffected",
              "version": "6.6.60",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.11.*",
              "status": "unaffected",
              "version": "6.11.7",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "6.12",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.1.191",
                  "versionStartIncluding": "6.0",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.6.60",
                  "versionStartIncluding": "6.0",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.11.7",
                  "versionStartIncluding": "6.0",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.12",
                  "versionStartIncluding": "6.0",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\ncxl/port: Fix use-after-free, permit out-of-order decoder shutdown\n\nIn support of investigating an initialization failure report [1],\ncxl_test was updated to register mock memory-devices after the mock\nroot-port/bus device had been registered. That led to cxl_test crashing\nwith a use-after-free bug with the following signature:\n\n    cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1\n    cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1\n    cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0\n1)  cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1\n    [..]\n    cxld_unregister: cxl decoder14.0:\n    cxl_region_decode_reset: cxl_region region3:\n    mock_decoder_reset: cxl_port port3: decoder3.0 reset\n2)  mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1\n    cxl_endpoint_decoder_release: cxl decoder14.0:\n    [..]\n    cxld_unregister: cxl decoder7.0:\n3)  cxl_region_decode_reset: cxl_region region3:\n    Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI\n    [..]\n    RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core]\n    [..]\n    Call Trace:\n     \u003cTASK\u003e\n     cxl_region_decode_reset+0x69/0x190 [cxl_core]\n     cxl_region_detach+0xe8/0x210 [cxl_core]\n     cxl_decoder_kill_region+0x27/0x40 [cxl_core]\n     cxld_unregister+0x5d/0x60 [cxl_core]\n\nAt 1) a region has been established with 2 endpoint decoders (7.0 and\n14.0). Those endpoints share a common switch-decoder in the topology\n(3.0). At teardown, 2), decoder14.0 is the first to be removed and hits\nthe \"out of order reset case\" in the switch decoder. The effect though\nis that region3 cleanup is aborted leaving it in-tact and\nreferencing decoder14.0. At 3) the second attempt to teardown region3\ntrips over the stale decoder14.0 object which has long since been\ndeleted.\n\nThe fix here is to recognize that the CXL specification places no\nmandate on in-order shutdown of switch-decoders, the driver enforces\nin-order allocation, and hardware enforces in-order commit. So, rather\nthan fail and leave objects dangling, always remove them.\n\nIn support of making cxl_region_decode_reset() always succeed,\ncxl_region_invalidate_memregion() failures are turned into warnings.\nCrashing the kernel is ok there since system integrity is at risk if\ncaches cannot be managed around physical address mutation events like\nCXL region destruction.\n\nA new device_for_each_child_reverse_from() is added to cleanup\nport-\u003ecommit_end after all dependent decoders have been disabled. In\nother words if decoders are allocated 0-\u003e1-\u003e2 and disabled 1-\u003e2-\u003e0 then\nport-\u003ecommit_end only decrements from 2 after 2 has been disabled, and\nit decrements all the way to zero since 1 was disabled previously."
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-10-30T12:19:50.433Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/3ecd2b229f5e42b36b5acf0e82510a70a632f041"
        },
        {
          "url": "https://git.kernel.org/stable/c/8e1b52c15c81106456437f8e49575040e489e355"
        },
        {
          "url": "https://git.kernel.org/stable/c/78c8454fdce0eeee962be004eb6d99860c80dad1"
        },
        {
          "url": "https://git.kernel.org/stable/c/101c268bd2f37e965a5468353e62d154db38838e"
        }
      ],
      "title": "cxl/port: Fix use-after-free, permit out-of-order decoder shutdown",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2024-50226",
    "datePublished": "2024-11-09T10:14:37.003Z",
    "dateReserved": "2024-10-21T19:36:19.973Z",
    "dateUpdated": "2026-10-30T12:19:50.433Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2024-50226",
      "date": "2026-11-19",
      "epss": "0.0024",
      "percentile": "0.15313"
    },
    "microsoft_vex": {
      "current_release_date": "2026-02-18T14:25:28.000Z",
      "cve": "CVE-2024-50226",
      "id": "msrc_CVE-2024-50226",
      "initial_release_date": "2025-01-29T00:00:00.000Z",
      "product_status:known_not_affected": "1",
      "source": "Microsoft CSAF VEX",
      "status": "final",
      "title": "cxl/port: Fix use-after-free, permit out-of-order decoder shutdown",
      "url": "https://msrc.microsoft.com/csaf/vex/2025/msrc_cve-2024-50226.json",
      "version": "2"
    },
    "redhat_vex": {
      "aggregate_severity": "Moderate",
      "current_release_date": "2026-11-05T13:46:45+00:00",
      "cve": "CVE-2024-50226",
      "id": "CVE-2024-50226",
      "initial_release_date": "2024-11-09T00:00:00+00:00",
      "product_status:fixed": "280",
      "product_status:known_affected": "42",
      "product_status:known_not_affected": "48",
      "source": "Red Hat CSAF VEX",
      "status": "final",
      "title": "kernel: cxl/port: Fix use-after-free, permit out-of-order decoder shutdown",
      "url": "https://security.access.redhat.com/data/csaf/v2/vex/2024/cve-2024-50226.json",
      "version": "3"
    },
    "vulnrichment": {
      "containers": {
        "adp": [
          {
            "metrics": [
              {
                "cvssV3_1": {
                  "attackComplexity": "LOW",
                  "attackVector": "LOCAL",
                  "availabilityImpact": "HIGH",
                  "baseScore": 7.8,
                  "baseSeverity": "HIGH",
                  "confidentialityImpact": "HIGH",
                  "integrityImpact": "HIGH",
                  "privilegesRequired": "LOW",
                  "scope": "UNCHANGED",
                  "userInteraction": "NONE",
                  "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
                  "version": "3.1"
                }
              },
              {
                "other": {
                  "content": {
                    "id": "CVE-2024-50226",
                    "options": [
                      {
                        "Exploitation": "none"
                      },
                      {
                        "Automatable": "no"
                      },
                      {
                        "Technical Impact": "total"
                      }
                    ],
                    "role": "CISA Coordinator",
                    "timestamp": "2024-12-11T14:28:17.687131Z",
                    "version": "2.0.3"
                  },
                  "type": "ssvc"
                }
              }
            ],
            "problemTypes": [
              {
                "descriptions": [
                  {
                    "cweId": "CWE-416",
                    "description": "CWE-416 Use After Free",
                    "lang": "en",
                    "type": "CWE"
                  }
                ]
              }
            ],
            "providerMetadata": {
              "dateUpdated": "2024-12-11T14:28:18.844Z",
              "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
              "shortName": "CISA-ADP"
            },
            "title": "CISA ADP Vulnrichment"
          }
        ],
        "cna": {
          "affected": [
            {
              "defaultStatus": "unaffected",
              "product": "Linux",
              "programFiles": [
                "drivers/base/core.c",
                "drivers/cxl/core/hdm.c",
                "drivers/cxl/core/region.c",
                "drivers/cxl/cxl.h",
                "include/linux/device.h",
                "tools/testing/cxl/test/cxl.c"
              ],
              "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
              "vendor": "Linux",
              "versions": [
                {
                  "lessThan": "3ecd2b229f5e42b36b5acf0e82510a70a632f041",
                  "status": "affected",
                  "version": "176baefb2eb5d7a3ddebe3ff803db1fce44574b5",
                  "versionType": "git"
                },
                {
                  "lessThan": "8e1b52c15c81106456437f8e49575040e489e355",
                  "status": "affected",
                  "version": "176baefb2eb5d7a3ddebe3ff803db1fce44574b5",
                  "versionType": "git"
                },
                {
                  "lessThan": "78c8454fdce0eeee962be004eb6d99860c80dad1",
                  "status": "affected",
                  "version": "176baefb2eb5d7a3ddebe3ff803db1fce44574b5",
                  "versionType": "git"
                },
                {
                  "lessThan": "101c268bd2f37e965a5468353e62d154db38838e",
                  "status": "affected",
                  "version": "176baefb2eb5d7a3ddebe3ff803db1fce44574b5",
                  "versionType": "git"
                }
              ]
            },
            {
              "defaultStatus": "affected",
              "product": "Linux",
              "programFiles": [
                "drivers/base/core.c",
                "drivers/cxl/core/hdm.c",
                "drivers/cxl/core/region.c",
                "drivers/cxl/cxl.h",
                "include/linux/device.h",
                "tools/testing/cxl/test/cxl.c"
              ],
              "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
              "vendor": "Linux",
              "versions": [
                {
                  "status": "affected",
                  "version": "6.0"
                },
                {
                  "lessThan": "6.0",
                  "status": "unaffected",
                  "version": "0",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "6.1.*",
                  "status": "unaffected",
                  "version": "6.1.191",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "6.6.*",
                  "status": "unaffected",
                  "version": "6.6.60",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "6.11.*",
                  "status": "unaffected",
                  "version": "6.11.7",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "*",
                  "status": "unaffected",
                  "version": "6.12",
                  "versionType": "original_commit_for_fix"
                }
              ]
            }
          ],
          "cpeApplicability": [
            {
              "nodes": [
                {
                  "cpeMatch": [
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.1.191",
                      "versionStartIncluding": "6.0",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.6.60",
                      "versionStartIncluding": "6.0",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.11.7",
                      "versionStartIncluding": "6.0",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.12",
                      "versionStartIncluding": "6.0",
                      "vulnerable": true
                    }
                  ],
                  "negate": false,
                  "operator": "OR"
                }
              ]
            }
          ],
          "descriptions": [
            {
              "lang": "en",
              "value": "In the Linux kernel, the following vulnerability has been resolved:\n\ncxl/port: Fix use-after-free, permit out-of-order decoder shutdown\n\nIn support of investigating an initialization failure report [1],\ncxl_test was updated to register mock memory-devices after the mock\nroot-port/bus device had been registered. That led to cxl_test crashing\nwith a use-after-free bug with the following signature:\n\n    cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1\n    cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1\n    cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0\n1)  cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1\n    [..]\n    cxld_unregister: cxl decoder14.0:\n    cxl_region_decode_reset: cxl_region region3:\n    mock_decoder_reset: cxl_port port3: decoder3.0 reset\n2)  mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1\n    cxl_endpoint_decoder_release: cxl decoder14.0:\n    [..]\n    cxld_unregister: cxl decoder7.0:\n3)  cxl_region_decode_reset: cxl_region region3:\n    Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI\n    [..]\n    RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core]\n    [..]\n    Call Trace:\n     \u003cTASK\u003e\n     cxl_region_decode_reset+0x69/0x190 [cxl_core]\n     cxl_region_detach+0xe8/0x210 [cxl_core]\n     cxl_decoder_kill_region+0x27/0x40 [cxl_core]\n     cxld_unregister+0x5d/0x60 [cxl_core]\n\nAt 1) a region has been established with 2 endpoint decoders (7.0 and\n14.0). Those endpoints share a common switch-decoder in the topology\n(3.0). At teardown, 2), decoder14.0 is the first to be removed and hits\nthe \"out of order reset case\" in the switch decoder. The effect though\nis that region3 cleanup is aborted leaving it in-tact and\nreferencing decoder14.0. At 3) the second attempt to teardown region3\ntrips over the stale decoder14.0 object which has long since been\ndeleted.\n\nThe fix here is to recognize that the CXL specification places no\nmandate on in-order shutdown of switch-decoders, the driver enforces\nin-order allocation, and hardware enforces in-order commit. So, rather\nthan fail and leave objects dangling, always remove them.\n\nIn support of making cxl_region_decode_reset() always succeed,\ncxl_region_invalidate_memregion() failures are turned into warnings.\nCrashing the kernel is ok there since system integrity is at risk if\ncaches cannot be managed around physical address mutation events like\nCXL region destruction.\n\nA new device_for_each_child_reverse_from() is added to cleanup\nport-\u003ecommit_end after all dependent decoders have been disabled. In\nother words if decoders are allocated 0-\u003e1-\u003e2 and disabled 1-\u003e2-\u003e0 then\nport-\u003ecommit_end only decrements from 2 after 2 has been disabled, and\nit decrements all the way to zero since 1 was disabled previously."
            }
          ],
          "providerMetadata": {
            "dateUpdated": "2026-10-30T12:19:50.433Z",
            "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "shortName": "Linux"
          },
          "references": [
            {
              "url": "https://git.kernel.org/stable/c/3ecd2b229f5e42b36b5acf0e82510a70a632f041"
            },
            {
              "url": "https://git.kernel.org/stable/c/8e1b52c15c81106456437f8e49575040e489e355"
            },
            {
              "url": "https://git.kernel.org/stable/c/78c8454fdce0eeee962be004eb6d99860c80dad1"
            },
            {
              "url": "https://git.kernel.org/stable/c/101c268bd2f37e965a5468353e62d154db38838e"
            }
          ],
          "title": "cxl/port: Fix use-after-free, permit out-of-order decoder shutdown",
          "x_generator": {
            "engine": "bippy-1.2.0"
          }
        }
      },
      "cveMetadata": {
        "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "assignerShortName": "Linux",
        "cveId": "CVE-2024-50226",
        "datePublished": "2024-11-09T10:14:37.003Z",
        "dateReserved": "2024-10-21T19:36:19.973Z",
        "dateUpdated": "2026-10-30T12:19:50.433Z",
        "state": "PUBLISHED"
      },
      "dataType": "CVE_RECORD",
      "dataVersion": "5.2"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.