UBUNTU-CVE-2026-64194 (CVE-2026-64194)

Vulnerability from osv_ubuntu – Published: 2026-07-20 19:17 – Updated: 2026-10-17 09:47 – Source website
VLAI
Details

Net::DNS versions through 1.55 for Perl allow Denial of Service via deep DNS compression pointer chains. Net::DNS::DomainName::decode follows RFC 1035 compression pointers by recursing into itself with no depth limit. It is possible to construct a name which saturates the call stack (at least with larger TCP responses), leading to a potential Denial of Service. The guard $link < $offset prevents forward and circular chains, but still allows arbitrarily long backward chains. The per-offset cache ($cache) is populated at the start of each call and short-circuits only re-traverses of the same offset - the initial descent through a fresh chain still recurses at full depth. A crafted packet can chain two-byte compression pointers so that each one points two bytes earlier than the previous, producing a chain length of offset / 2. For the 14-bit pointer field (max offset 16383) this gives up to ~8191 recursive frames. For a TCP DNS message the limit is the 16-bit length field (~32767 frames). Perl's default C stack handles only a few thousand frames; beyond that the process receives SIGSEGV or similar, which is a denial-of-service for any application parsing untrusted DNS data. The vulnerability is triggered by Net::DNS::Packet->new(\$wire) i.e. any point where the library decodes a DNS message from the network.


{
  "affected": [
    {
      "ecosystem_specific": {
        "binaries": [
          {
            "binary_name": "libnet-dns-perl",
            "binary_version": "0.68-1.2build1"
          }
        ]
      },
      "package": {
        "ecosystem": "Ubuntu:14.04:LTS",
        "name": "libnet-dns-perl",
        "purl": "pkg:deb/ubuntu/libnet-dns-perl@0.68-1.2build1?arch=source\u0026distro=trusty"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ],
      "versions": [
        "0.68-1.2",
        "0.68-1.2build1"
      ]
    },
    {
      "ecosystem_specific": {
        "binaries": [
          {
            "binary_name": "libnet-dns-perl",
            "binary_version": "0.81-2build1"
          }
        ]
      },
      "package": {
        "ecosystem": "Ubuntu:16.04:LTS",
        "name": "libnet-dns-perl",
        "purl": "pkg:deb/ubuntu/libnet-dns-perl@0.81-2build1?arch=source\u0026distro=xenial"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ],
      "versions": [
        "0.81-2",
        "0.81-2build1"
      ]
    },
    {
      "ecosystem_specific": {
        "binaries": [
          {
            "binary_name": "libnet-dns-perl",
            "binary_version": "1.10-2"
          }
        ]
      },
      "package": {
        "ecosystem": "Ubuntu:18.04:LTS",
        "name": "libnet-dns-perl",
        "purl": "pkg:deb/ubuntu/libnet-dns-perl@1.10-2?arch=source\u0026distro=bionic"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ],
      "versions": [
        "1.10-2"
      ]
    },
    {
      "ecosystem_specific": {
        "binaries": [
          {
            "binary_name": "libnet-dns-perl",
            "binary_version": "1.22-1"
          }
        ]
      },
      "package": {
        "ecosystem": "Ubuntu:20.04:LTS",
        "name": "libnet-dns-perl",
        "purl": "pkg:deb/ubuntu/libnet-dns-perl@1.22-1?arch=source\u0026distro=focal"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ],
      "versions": [
        "1.20-1",
        "1.21-1",
        "1.22-1"
      ]
    },
    {
      "ecosystem_specific": {
        "binaries": [
          {
            "binary_name": "libnet-dns-perl",
            "binary_version": "1.33-1"
          }
        ]
      },
      "package": {
        "ecosystem": "Ubuntu:22.04:LTS",
        "name": "libnet-dns-perl",
        "purl": "pkg:deb/ubuntu/libnet-dns-perl@1.33-1?arch=source\u0026distro=jammy"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ],
      "versions": [
        "1.29-1",
        "1.32-1",
        "1.33-1"
      ]
    },
    {
      "ecosystem_specific": {
        "binaries": [
          {
            "binary_name": "libnet-dns-perl",
            "binary_version": "1.44-1ubuntu1"
          }
        ]
      },
      "package": {
        "ecosystem": "Ubuntu:24.04:LTS",
        "name": "libnet-dns-perl",
        "purl": "pkg:deb/ubuntu/libnet-dns-perl@1.44-1ubuntu1?arch=source\u0026distro=noble"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ],
      "versions": [
        "1.39-2ubuntu1",
        "1.40-1ubuntu1",
        "1.44-1ubuntu1"
      ]
    },
    {
      "ecosystem_specific": {
        "binaries": [
          {
            "binary_name": "libnet-dns-perl",
            "binary_version": "1.55-1ubuntu1"
          }
        ]
      },
      "package": {
        "ecosystem": "Ubuntu:26.10",
        "name": "libnet-dns-perl",
        "purl": "pkg:deb/ubuntu/libnet-dns-perl@1.55-1ubuntu1?arch=source\u0026distro=stonking"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ],
      "versions": [
        "1.54-1ubuntu1",
        "1.55-1ubuntu1"
      ]
    },
    {
      "ecosystem_specific": {
        "binaries": [
          {
            "binary_name": "libnet-dns-perl",
            "binary_version": "1.54-1ubuntu1"
          }
        ]
      },
      "package": {
        "ecosystem": "Ubuntu:26.04:LTS",
        "name": "libnet-dns-perl",
        "purl": "pkg:deb/ubuntu/libnet-dns-perl@1.54-1ubuntu1?arch=source\u0026distro=resolute"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "0"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ],
      "versions": [
        "1.50-1ubuntu1",
        "1.53-1ubuntu1",
        "1.54-1ubuntu1"
      ]
    }
  ],
  "aliases": [],
  "details": "Net::DNS versions through 1.55 for Perl allow Denial of Service via deep DNS compression pointer chains. Net::DNS::DomainName::decode follows RFC 1035 compression pointers by recursing into itself with no depth limit. It is possible to construct a name which saturates the call stack (at least with larger TCP responses), leading to a potential Denial of Service. The guard `$link \u003c $offset` prevents forward and circular chains, but still allows arbitrarily long backward chains. The per-offset cache (`$cache`) is populated at the start of each call and short-circuits only re-traverses of the same offset - the initial descent through a fresh chain still recurses at full depth. A crafted packet can chain two-byte compression pointers so that each one points two bytes earlier than the previous, producing a chain length of `offset / 2`. For the 14-bit pointer field (max offset 16383) this gives up to ~8191 recursive frames. For a TCP DNS message the limit is the 16-bit length field (~32767 frames). Perl\u0027s default C stack handles only a few thousand frames; beyond that the process receives SIGSEGV or similar, which is a denial-of-service for any application parsing untrusted DNS data. The vulnerability is triggered by `Net::DNS::Packet-\u003enew(\\$wire)` i.e. any point where the library decodes a DNS message from the network.",
  "id": "UBUNTU-CVE-2026-64194",
  "modified": "2026-10-17T09:47:15Z",
  "published": "2026-07-20T19:17:00Z",
  "references": [
    {
      "type": "REPORT",
      "url": "https://ubuntu.com/security/CVE-2026-64194"
    },
    {
      "type": "REPORT",
      "url": "https://www.cve.org/CVERecord?id=CVE-2026-64194"
    },
    {
      "type": "REPORT",
      "url": "https://lists.security.metacpan.org/cve-announce/msg/41989541/"
    },
    {
      "type": "REPORT",
      "url": "https://rt.cpan.org/Ticket/Display.html?id=179946"
    }
  ],
  "related": [],
  "schema_version": "1.7.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
      "type": "CVSS_V3"
    },
    {
      "score": "medium",
      "type": "Ubuntu"
    }
  ],
  "upstream": [
    "CVE-2026-64194"
  ]
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.