CVE-2026-98150 (GCVE-0-2026-98150)
Vulnerability from cvelistv5
Published
2026-09-25 10:36
Modified
2026-10-19 09:14
Severity ?
7.0 (High) - CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H
Summary
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix BPF_F_CPU validation for sparse CPU IDs BPF_F_CPU stores the target CPU ID in the upper 32 bits of the map operation flags. bpf_map_check_op_flags() currently compares that ID with num_possible_cpus(), which is the number of possible CPUs rather than a bound on CPU IDs. On an arm64 QEMU guest with a CPU device-tree hole, the possible CPU mask was 0,2-3. A userspace program using raw bpf() syscalls creates a BPF_MAP_TYPE_PERCPU_ARRAY and performs update and lookup operations for each CPU by setting BPF_F_CPU and the CPU ID in the flags. With the old check, CPU 1 is incorrectly accepted while valid CPU 3 is rejected with -ERANGE. The CPU 1 update then reaches the per-CPU map access path and triggers: Unable to handle kernel paging request at virtual address ... pc : __pi_memcpy_generic+0x5c/0x22c lr : bpf_percpu_array_update+0x2dc/0x2e8 Call trace: __pi_memcpy_generic bpf_map_update_value map_update_elem __sys_bpf Check the CPU ID against nr_cpu_ids and cpu_possible() instead. This rejects CPU IDs outside the valid range and CPUs absent from the possible mask, while allowing valid sparse CPU IDs.
References
Impacted products
Vendor Product Version
Linux Linux Version: 2b421662c7887a0649fe409155a1f101562d0fa9
Version: 2b421662c7887a0649fe409155a1f101562d0fa9
 Create a notification for this product.
Show details on NVD website

To clipboard 

{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "include/linux/bpf.h"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "bdc5941f6eeef90b76a07fd8ca38ac1933ba2195",
              "status": "affected",
              "version": "2b421662c7887a0649fe409155a1f101562d0fa9",
              "versionType": "git"
            },
            {
              "lessThan": "ed54bf564ac52699cf4def3d0c2125d493e756f9",
              "status": "affected",
              "version": "2b421662c7887a0649fe409155a1f101562d0fa9",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "include/linux/bpf.h"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "7.0"
            },
            {
              "lessThan": "7.0",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "7.2.*",
              "status": "unaffected",
              "version": "7.2.7",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.3",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.2.7",
                  "versionStartIncluding": "7.0",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.3",
                  "versionStartIncluding": "7.0",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nbpf: Fix BPF_F_CPU validation for sparse CPU IDs\n\nBPF_F_CPU stores the target CPU ID in the upper 32 bits of the map\noperation flags. bpf_map_check_op_flags() currently compares that ID\nwith num_possible_cpus(), which is the number of possible CPUs rather\nthan a bound on CPU IDs.\n\nOn an arm64 QEMU guest with a CPU device-tree hole, the possible CPU\nmask was 0,2-3. A userspace program using raw bpf() syscalls creates\na BPF_MAP_TYPE_PERCPU_ARRAY and performs update and lookup operations\nfor each CPU by setting BPF_F_CPU and the CPU ID in the flags.\n\nWith the old check, CPU 1 is incorrectly accepted while valid CPU 3 is\nrejected with -ERANGE. The CPU 1 update then reaches the per-CPU map\naccess path and triggers:\n\n  Unable to handle kernel paging request at virtual address ...\n  pc : __pi_memcpy_generic+0x5c/0x22c\n  lr : bpf_percpu_array_update+0x2dc/0x2e8\n  Call trace:\n    __pi_memcpy_generic\n    bpf_map_update_value\n    map_update_elem\n    __sys_bpf\n\nCheck the CPU ID against nr_cpu_ids and cpu_possible() instead. This\nrejects CPU IDs outside the valid range and CPUs absent from the\npossible mask, while allowing valid sparse CPU IDs."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "baseScore": 7,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "scenarios": [
            {
              "lang": "en",
              "value": "AV:L - The out-of-range CPU ID arrives in attr-\u003eflags of the local bpf(2) BPF_MAP_UPDATE_ELEM/LOOKUP_ELEM syscall (map_update_elem/map_lookup_elem -\u003e bpf_map_check_op_flags); no network or adjacent protocol carries it.\nAC:H - The check only lets through a CPU ID in a hole of the possible-CPU mask (e.g. 0,2-3 on arm64 device-tree systems). That topology comes from firmware/hardware and the attacker can\u0027t create it. It also needs a permissive BPF setup, and where the stray per_cpu_ptr() lands (unmapped init memory vs mapped .data) depends on percpu allocator placement.\nPR:L - BPF_MAP_TYPE_PERCPU_ARRAY/PERCPU_HASH are in map_create()\u0027s unprivileged list when unprivileged_bpf_disabled=0 or with a delegated BPF token, and map_update_elem/map_lookup_elem check only FMODE_CAN_WRITE/READ on the map fd, not a capability.\nUI:N - The attacker creates or opens the per-CPU map and issues the update/lookup with BPF_F_CPU and a hole CPU ID entirely on their own; no other user acts.\nS:U - The bad access corrupts or reads kernel memory within the same kernel security authority; no VM, IOMMU or sandbox boundary is crossed.\nC:H - bpf_percpu_array_copy() copies value_size bytes from per_cpu_ptr(pptr, cpu) for a missing CPU whose __per_cpu_offset is 0, i.e. from a stray kernel address, back to userspace via BPF_MAP_LOOKUP_ELEM, and the attacker can repeat it.\nI:H - bpf_percpu_array_update() does copy_map_value() of attacker-supplied value bytes to per_cpu_ptr(pptr, cpu) for the missing CPU. That is an out-of-bounds write of controlled data to an address outside any valid per-CPU unit, which can land in kernel .data past __init_end.\nA:H - As the fix commit shows, the update faults in __pi_memcpy_generic from bpf_percpu_array_update on unmapped memory (the freed/vunmapped __init region on arm64), causing a kernel oops."
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-10-19T09:14:43.287Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/bdc5941f6eeef90b76a07fd8ca38ac1933ba2195"
        },
        {
          "url": "https://git.kernel.org/stable/c/ed54bf564ac52699cf4def3d0c2125d493e756f9"
        }
      ],
      "title": "bpf: Fix BPF_F_CPU validation for sparse CPU IDs",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2026-98150",
    "datePublished": "2026-09-25T10:36:22.774Z",
    "dateReserved": "2026-09-25T10:25:14.320Z",
    "dateUpdated": "2026-10-19T09:14:43.287Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.




Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.