CVE-2026-98105 (GCVE-0-2026-98105)
Vulnerability from cvelistv5
Published
2026-09-25 10:35
Modified
2026-10-19 09:13
Severity ?
Summary
In the Linux kernel, the following vulnerability has been resolved: net: ethernet: oa_tc6: Improve the error recovery When oversubscribed traffic causes lot of buffer overflow errors, probably due to loss of data chunks, driver fails to find a data chunk with end_valid bit set, before it runs out of sk buffer space. As a result, assert is seen during skb_put. Now, check is made if skb buffer has enough tailroom for the incoming data before accepting. If there is no room, current frame is abandoned and it will start looking for a data chunk with start_valid bit, that is a new frame. SK buffer allocation error is considered as recoverable error. rx_buf_overflow flag is too specific and no longer the only condition this flag is used for. Therefore it is renamed as wait_until_start_valid. This is more appropriate as this flag is used to look for the next data chunk with SV bit set, after failures like buffer overflow, buffer allocation failure, skb pointer validity besides buffer overflow error. Not writing to status0 if it reads 0.
Impacted products
Vendor Product Version
Linux Linux Version: d70a0d8f2f2d1b9bb6e3e9dfed25ae3ca3303770
Version: d70a0d8f2f2d1b9bb6e3e9dfed25ae3ca3303770
Version: d70a0d8f2f2d1b9bb6e3e9dfed25ae3ca3303770
Version: d70a0d8f2f2d1b9bb6e3e9dfed25ae3ca3303770
Create a notification for this product.
Show details on NVD website


{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/net/ethernet/oa_tc6.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "d33003e752f25c385f2cf21964123582a44f6818",
              "status": "affected",
              "version": "d70a0d8f2f2d1b9bb6e3e9dfed25ae3ca3303770",
              "versionType": "git"
            },
            {
              "lessThan": "9d3f6e714d5f8b728837f31bbe865b64cfd3216a",
              "status": "affected",
              "version": "d70a0d8f2f2d1b9bb6e3e9dfed25ae3ca3303770",
              "versionType": "git"
            },
            {
              "lessThan": "b89770d493749d7c3b8649996e1089719b4eff8d",
              "status": "affected",
              "version": "d70a0d8f2f2d1b9bb6e3e9dfed25ae3ca3303770",
              "versionType": "git"
            },
            {
              "lessThan": "172c974113bffe5723b80b1acac17593bb50513c",
              "status": "affected",
              "version": "d70a0d8f2f2d1b9bb6e3e9dfed25ae3ca3303770",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/net/ethernet/oa_tc6.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.12"
            },
            {
              "lessThan": "6.12",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.111",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.53",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "7.2.*",
              "status": "unaffected",
              "version": "7.2.7",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.3",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.12.111",
                  "versionStartIncluding": "6.12",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.18.53",
                  "versionStartIncluding": "6.12",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.2.7",
                  "versionStartIncluding": "6.12",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.3",
                  "versionStartIncluding": "6.12",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnet: ethernet: oa_tc6: Improve the error recovery\n\nWhen oversubscribed traffic causes lot of buffer overflow errors,\nprobably due to loss of data chunks, driver fails to find a\ndata chunk with end_valid bit set, before it runs out of sk buffer\nspace. As a result, assert is seen during skb_put.\n\nNow, check is made if skb buffer has enough tailroom for the\nincoming data before accepting. If there is no room, current\nframe is abandoned and it will start looking for a data chunk\nwith start_valid bit, that is a new frame.\n\nSK buffer allocation error is considered as recoverable error.\n\nrx_buf_overflow flag is too specific and no longer the only\ncondition this flag is used for. Therefore it is renamed as\nwait_until_start_valid. This is more appropriate as this flag\nis used to look for the next data chunk with SV bit set, after\nfailures like buffer overflow, buffer allocation failure, skb pointer\nvalidity besides buffer overflow error.\n\nNot writing to status0 if it reads 0."
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-10-19T09:13:57.780Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/d33003e752f25c385f2cf21964123582a44f6818"
        },
        {
          "url": "https://git.kernel.org/stable/c/9d3f6e714d5f8b728837f31bbe865b64cfd3216a"
        },
        {
          "url": "https://git.kernel.org/stable/c/b89770d493749d7c3b8649996e1089719b4eff8d"
        },
        {
          "url": "https://git.kernel.org/stable/c/172c974113bffe5723b80b1acac17593bb50513c"
        }
      ],
      "title": "net: ethernet: oa_tc6: Improve the error recovery",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2026-98105",
    "datePublished": "2026-09-25T10:35:55.142Z",
    "dateReserved": "2026-09-25T10:25:14.316Z",
    "dateUpdated": "2026-10-19T09:13:57.780Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.


Loading…

Loading…