CVE-2026-97603 (GCVE-0-2026-97603)
Vulnerability from cvelistv5
Published
2026-09-25 10:22
Modified
2026-10-19 09:10
Severity ?
Summary
In the Linux kernel, the following vulnerability has been resolved: idpf: disable DIM work before freeing q_vectors idpf never drains the Tx/Rx DIM works before freeing the memory they live in. tx_dim and rx_dim are embedded in struct idpf_q_vector, they are queued from the NAPI poll via net_dim(), and idpf_vport_intr_rel() ends with kfree(rsrc->q_vectors). Nothing in the driver cancels them. idpf_tx_dim_work() and idpf_rx_dim_work() then run on freed memory: idpf_vport_intr_write_itr() writes the ITR register through q_vector->intr_reg.tx_itr / rx_itr, void __iomem pointers loaded out of the freed q_vector. No configuration is needed to get there -- IDPF_ITR_IS_DYNAMIC() is defined as (itr_mode) and idpf_vport_alloc() initialises both modes to IDPF_ITR_DYNAMIC. Draining after idpf_vport_intr_napi_dis_all() is not enough on its own. idpf_net_dim() is called from inside the "if (napi_complete_done(napi, work_done))" branch of the poll, and napi_complete_done() has already cleared NAPIF_STATE_SCHED by then. napi_disable_locked() waits only while (val & (NAPIF_STATE_SCHED | NAPIF_STATE_NPSVC)), so napi_disable() can return while the poll tail is still queueing the work, and a plain cancel_work_sync() would be re-armed behind the drain. Use disable_work_sync(): schedule_work() on a work with a non-zero disable count is dropped by clear_pending_if_disabled() before __queue_work() is reached. Move idpf_init_dim() to idpf_vport_intr_alloc() so the works are initialised on every path that can reach the drain -- the three "goto intr_deinit" sites between idpf_vport_intr_init() and idpf_vport_intr_ena() get there without the enable side having run. Nothing re-enables them: rsrc->q_vectors is freed on every exit from idpf_vport_open() and on every idpf_vport_stop(), so the count dies with the object. It is a race, not a deterministic failure -- net_dim() only schedules once DIM_NEVENTS events have accumulated and the profile index changes. A KASAN ifup/ifdown loop under load is the way to see it.
References
Impacted products
Vendor Product Version
Linux Linux Version: c2d548cad1508d334517bcbd7cd5c915cc831fc0
Version: c2d548cad1508d334517bcbd7cd5c915cc831fc0
Version: c2d548cad1508d334517bcbd7cd5c915cc831fc0
Version: c2d548cad1508d334517bcbd7cd5c915cc831fc0
 Create a notification for this product.
Show details on NVD website

To clipboard 

{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/net/ethernet/intel/idpf/idpf_txrx.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "7d64d4c6bb6bb63b6cdb7de133c3ec48333b27b5",
              "status": "affected",
              "version": "c2d548cad1508d334517bcbd7cd5c915cc831fc0",
              "versionType": "git"
            },
            {
              "lessThan": "7e4312953788244d47074987d40d76702cf929f1",
              "status": "affected",
              "version": "c2d548cad1508d334517bcbd7cd5c915cc831fc0",
              "versionType": "git"
            },
            {
              "lessThan": "cd7a1598645b6917a8676b7e2efe8d97ce68a952",
              "status": "affected",
              "version": "c2d548cad1508d334517bcbd7cd5c915cc831fc0",
              "versionType": "git"
            },
            {
              "lessThan": "7dd4c829bac2916be98a3e34b41daaba7f42b4c4",
              "status": "affected",
              "version": "c2d548cad1508d334517bcbd7cd5c915cc831fc0",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/net/ethernet/intel/idpf/idpf_txrx.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.7"
            },
            {
              "lessThan": "6.7",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.112",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.53",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "7.2.*",
              "status": "unaffected",
              "version": "7.2.7",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.3",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.12.112",
                  "versionStartIncluding": "6.7",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.18.53",
                  "versionStartIncluding": "6.7",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.2.7",
                  "versionStartIncluding": "6.7",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.3",
                  "versionStartIncluding": "6.7",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nidpf: disable DIM work before freeing q_vectors\n\nidpf never drains the Tx/Rx DIM works before freeing the memory they\nlive in.  tx_dim and rx_dim are embedded in struct idpf_q_vector, they\nare queued from the NAPI poll via net_dim(), and idpf_vport_intr_rel()\nends with kfree(rsrc-\u003eq_vectors).  Nothing in the driver cancels them.\n\nidpf_tx_dim_work() and idpf_rx_dim_work() then run on freed memory:\nidpf_vport_intr_write_itr() writes the ITR register through\nq_vector-\u003eintr_reg.tx_itr / rx_itr, void __iomem pointers loaded out of\nthe freed q_vector.  No configuration is needed to get there --\nIDPF_ITR_IS_DYNAMIC() is defined as (itr_mode) and idpf_vport_alloc()\ninitialises both modes to IDPF_ITR_DYNAMIC.\n\nDraining after idpf_vport_intr_napi_dis_all() is not enough on its own.\nidpf_net_dim() is called from inside the\n\"if (napi_complete_done(napi, work_done))\" branch of the poll, and\nnapi_complete_done() has already cleared NAPIF_STATE_SCHED by then.\nnapi_disable_locked() waits only while (val \u0026 (NAPIF_STATE_SCHED |\nNAPIF_STATE_NPSVC)), so napi_disable() can return while the poll tail is\nstill queueing the work, and a plain cancel_work_sync() would be\nre-armed behind the drain.\n\nUse disable_work_sync(): schedule_work() on a work with a non-zero\ndisable count is dropped by clear_pending_if_disabled() before\n__queue_work() is reached.\n\nMove idpf_init_dim() to idpf_vport_intr_alloc() so the works are\ninitialised on every path that can reach the drain -- the three\n\"goto intr_deinit\" sites between idpf_vport_intr_init() and\nidpf_vport_intr_ena() get there without the enable side having run.\nNothing re-enables them: rsrc-\u003eq_vectors is freed on every exit from\nidpf_vport_open() and on every idpf_vport_stop(), so the count dies with\nthe object.\n\nIt is a race, not a deterministic failure -- net_dim() only schedules\nonce DIM_NEVENTS events have accumulated and the profile index changes.\nA KASAN ifup/ifdown loop under load is the way to see it."
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-10-19T09:10:07.248Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/7d64d4c6bb6bb63b6cdb7de133c3ec48333b27b5"
        },
        {
          "url": "https://git.kernel.org/stable/c/7e4312953788244d47074987d40d76702cf929f1"
        },
        {
          "url": "https://git.kernel.org/stable/c/cd7a1598645b6917a8676b7e2efe8d97ce68a952"
        },
        {
          "url": "https://git.kernel.org/stable/c/7dd4c829bac2916be98a3e34b41daaba7f42b4c4"
        }
      ],
      "title": "idpf: disable DIM work before freeing q_vectors",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2026-97603",
    "datePublished": "2026-09-25T10:22:16.015Z",
    "dateReserved": "2026-09-24T16:01:01.158Z",
    "dateUpdated": "2026-10-19T09:10:07.248Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.




Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.