{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-92103",
                "options": [
                  {
                    "Exploitation": "poc"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-09-30T15:00:25.491334Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-09-30T15:00:38.567Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "collectionURL": "https://repo.hex.pm",
          "cpes": [
            "cpe:2.3:a:elixir-mint:mint:*:*:*:*:*:*:*:*"
          ],
          "defaultStatus": "unaffected",
          "modules": [
            "\u0027Elixir.Mint.HTTP2.Frame\u0027",
            "\u0027Elixir.Mint.HTTP2\u0027"
          ],
          "packageName": "mint",
          "packageURL": "pkg:hex/mint",
          "product": "mint",
          "programFiles": [
            "lib/mint/http2/frame.ex",
            "lib/mint/http2.ex"
          ],
          "programRoutines": [
            {
              "name": "\u0027Elixir.Mint.HTTP2.Frame\u0027:decode_next/2"
            },
            {
              "name": "\u0027Elixir.Mint.HTTP2\u0027:stream/2"
            },
            {
              "name": "\u0027Elixir.Mint.HTTP2\u0027:recv/3"
            },
            {
              "name": "\u0027Elixir.Mint.HTTP2\u0027:handle_new_data/3"
            }
          ],
          "repo": "https://github.com/elixir-mint/mint",
          "vendor": "elixir-mint",
          "versions": [
            {
              "lessThan": "1.10.2",
              "status": "affected",
              "version": "0.1.0",
              "versionType": "semver"
            }
          ]
        },
        {
          "collectionURL": "https://github.com",
          "cpes": [
            "cpe:2.3:a:elixir-mint:mint:*:*:*:*:*:*:*:*"
          ],
          "defaultStatus": "unaffected",
          "modules": [
            "\u0027Elixir.Mint.HTTP2.Frame\u0027",
            "\u0027Elixir.Mint.HTTP2\u0027"
          ],
          "packageName": "elixir-mint/mint",
          "packageURL": "pkg:github/elixir-mint/mint",
          "product": "mint",
          "programFiles": [
            "lib/mint/http2/frame.ex",
            "lib/mint/http2.ex"
          ],
          "programRoutines": [
            {
              "name": "\u0027Elixir.Mint.HTTP2.Frame\u0027:decode_next/2"
            },
            {
              "name": "\u0027Elixir.Mint.HTTP2\u0027:stream/2"
            },
            {
              "name": "\u0027Elixir.Mint.HTTP2\u0027:recv/3"
            },
            {
              "name": "\u0027Elixir.Mint.HTTP2\u0027:handle_new_data/3"
            }
          ],
          "repo": "https://github.com/elixir-mint/mint",
          "vendor": "elixir-mint",
          "versions": [
            {
              "changes": [
                {
                  "at": "20252ca85065f4d1092aed9ee4ed21841a507dfe",
                  "status": "unaffected"
                },
                {
                  "at": "44d7ce4755d0444ee415cbcca7ce4942382da4dd",
                  "status": "unaffected"
                }
              ],
              "lessThan": "*",
              "status": "affected",
              "version": "596ca4304504be68939c4929e0831557097962b8",
              "versionType": "git"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:a:elixir-mint:mint:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "1.10.2",
                  "versionStartIncluding": "0.1.0",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ],
          "operator": "AND"
        }
      ],
      "credits": [
        {
          "lang": "en",
          "type": "finder",
          "value": "zx"
        },
        {
          "lang": "en",
          "type": "reporter",
          "value": "zx"
        },
        {
          "lang": "en",
          "type": "remediation developer",
          "value": "Andrea Leopardi"
        },
        {
          "lang": "en",
          "type": "remediation reviewer",
          "value": "Eric Meadows-J\u00f6nsson"
        }
      ],
      "dateAssigned": "2026-09-24T09:19:17.000Z",
      "datePublic": "2026-09-28T11:15:20.000Z",
      "descriptions": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "\u003cp\u003eAllocation of Resources Without Limits or Throttling vulnerability in elixir-mint mint allows a malicious HTTP/2 server to make the client hold up to about 16 MiB per connection in frames it should reject, consuming client memory.\u003c/p\u003e\n\u003cp\u003e\u003ccode\u003eMint.HTTP2.Frame.decode_next/2\u003c/code\u003e in \u003ccode\u003elib/mint/http2/frame.ex\u003c/code\u003e compares a frame with the client\u0027s \u003ccode\u003emax_frame_size\u003c/code\u003e (16,384 bytes by default) only once the whole declared payload has arrived. Until then it returns \u003ccode\u003e:more\u003c/code\u003e, and \u003ccode\u003eMint.HTTP2\u003c/code\u003e keeps every received byte in the connection buffer. A server can declare a frame length of up to 16,777,215 bytes and withhold the last byte, keeping roughly 1,024 times the advertised limit buffered for as long as the connection stays open. The server has to send every byte the client buffers, so there is no amplification, and the buffer stops at the 24-bit frame length limit.\u003c/p\u003e\n\u003cp\u003eThis issue affects mint: from 0.1.0 before 1.10.2.\u003c/p\u003e"
            },
            {
              "base64": false,
              "type": "text/markdown",
              "value": "Allocation of Resources Without Limits or Throttling vulnerability in elixir-mint mint allows a malicious HTTP/2 server to make the client hold up to about 16 MiB per connection in frames it should reject, consuming client memory.\n\n`Mint.HTTP2.Frame.decode_next/2` in `lib/mint/http2/frame.ex` compares a frame with the client\u0027s `max_frame_size` (16,384 bytes by default) only once the whole declared payload has arrived. Until then it returns `:more`, and `Mint.HTTP2` keeps every received byte in the connection buffer. A server can declare a frame length of up to 16,777,215 bytes and withhold the last byte, keeping roughly 1,024 times the advertised limit buffered for as long as the connection stays open. The server has to send every byte the client buffers, so there is no amplification, and the buffer stops at the 24-bit frame length limit.\n\nThis issue affects mint: from 0.1.0 before 1.10.2."
            }
          ],
          "value": "Allocation of Resources Without Limits or Throttling vulnerability in elixir-mint mint allows a malicious HTTP/2 server to make the client hold up to about 16 MiB per connection in frames it should reject, consuming client memory.\n\nMint.HTTP2.Frame.decode_next/2 in lib/mint/http2/frame.ex compares a frame with the client\u0027s max_frame_size (16,384 bytes by default) only once the whole declared payload has arrived. Until then it returns :more, and Mint.HTTP2 keeps every received byte in the connection buffer. A server can declare a frame length of up to 16,777,215 bytes and withhold the last byte, keeping roughly 1,024 times the advertised limit buffered for as long as the connection stays open. The server has to send every byte the client buffers, so there is no amplification, and the buffer stops at the 24-bit frame length limit.\n\nThis issue affects mint: from 0.1.0 before 1.10.2."
        }
      ],
      "impacts": [
        {
          "capecId": "CAPEC-130",
          "descriptions": [
            {
              "lang": "en",
              "supportingMedia": [
                {
                  "base64": false,
                  "type": "text/html",
                  "value": "\u003cp\u003eA malicious or compromised HTTP/2 server can make a Mint client keep up to about 16 MiB per connection buffered, and keep it there while the connection stays open. Clients that hold many HTTP/2 connections to attacker-influenced origins, such as webhook senders, crawlers and proxies, can run out of memory.\u003c/p\u003e"
                },
                {
                  "base64": false,
                  "type": "text/markdown",
                  "value": "A malicious or compromised HTTP/2 server can make a Mint client keep up to about 16 MiB per connection buffered, and keep it there while the connection stays open. Clients that hold many HTTP/2 connections to attacker-influenced origins, such as webhook senders, crawlers and proxies, can run out of memory."
                }
              ],
              "value": "A malicious or compromised HTTP/2 server can make a Mint client keep up to about 16 MiB per connection buffered, and keep it there while the connection stays open. Clients that hold many HTTP/2 connections to attacker-influenced origins, such as webhook senders, crawlers and proxies, can run out of memory."
            }
          ]
        }
      ],
      "metrics": [
        {
          "cvssV4_0": {
            "Automatable": "NOT_DEFINED",
            "Recovery": "NOT_DEFINED",
            "Safety": "NOT_DEFINED",
            "attackComplexity": "LOW",
            "attackRequirements": "PRESENT",
            "attackVector": "NETWORK",
            "baseScore": 6.3,
            "baseSeverity": "MEDIUM",
            "privilegesRequired": "NONE",
            "providerUrgency": "NOT_DEFINED",
            "subAvailabilityImpact": "NONE",
            "subConfidentialityImpact": "NONE",
            "subIntegrityImpact": "NONE",
            "userInteraction": "NONE",
            "valueDensity": "NOT_DEFINED",
            "vectorString": "CVSS:4.0/AV:N/AC:L/AT:P/PR:N/UI:N/VC:N/VI:N/VA:L/SC:N/SI:N/SA:N",
            "version": "4.0",
            "vulnAvailabilityImpact": "LOW",
            "vulnConfidentialityImpact": "NONE",
            "vulnIntegrityImpact": "NONE",
            "vulnerabilityResponseEffort": "NOT_DEFINED"
          },
          "format": "CVSS",
          "scenarios": [
            {
              "lang": "en",
              "value": "GENERAL"
            }
          ]
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-770",
              "description": "CWE-770 Allocation of Resources Without Limits or Throttling",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-09-29T10:15:35.604Z",
        "orgId": "6b3ad84c-e1a6-4bf7-a703-f496b71e49db",
        "shortName": "EEF"
      },
      "references": [
        {
          "name": "GitHub Advisory",
          "tags": [
            "related",
            "vendor-advisory"
          ],
          "url": "https://github.com/elixir-mint/mint/security/advisories/GHSA-q95c-ccq6-j5j6"
        },
        {
          "name": "EEF CNA record for CVE-2026-92103",
          "tags": [
            "related"
          ],
          "url": "https://cna.erlef.org/cves/CVE-2026-92103.html"
        },
        {
          "name": "OSV record EEF-CVE-2026-92103",
          "tags": [
            "related"
          ],
          "url": "https://osv.dev/vulnerability/EEF-CVE-2026-92103"
        },
        {
          "name": "Introducing commit 596ca43 in elixir-mint/mint",
          "tags": [
            "related"
          ],
          "url": "https://github.com/elixir-mint/mint/commit/596ca4304504be68939c4929e0831557097962b8"
        },
        {
          "name": "Fix commit 20252ca in elixir-mint/mint",
          "tags": [
            "patch"
          ],
          "url": "https://github.com/elixir-mint/mint/commit/20252ca85065f4d1092aed9ee4ed21841a507dfe"
        },
        {
          "name": "Fix commit 44d7ce4 in elixir-mint/mint",
          "tags": [
            "patch"
          ],
          "url": "https://github.com/elixir-mint/mint/commit/44d7ce4755d0444ee415cbcca7ce4942382da4dd"
        }
      ],
      "source": {
        "discovery": "EXTERNAL"
      },
      "title": "Mint HTTP/2 client buffers oversized frames up to 16 MiB before enforcing max_frame_size",
      "workarounds": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "\u003cp\u003eConnect to untrusted origins over HTTP/1 only, with \u003ccode\u003eprotocols: [:http1]\u003c/code\u003e in \u003ccode\u003eMint.HTTP.connect/4\u003c/code\u003e, which never runs the HTTP/2 frame decoder. Finch and Req pools use HTTP/1 only unless \u003ccode\u003e:http2\u003c/code\u003e is added to their \u003ccode\u003eprotocols\u003c/code\u003e option.\u003c/p\u003e"
            },
            {
              "base64": false,
              "type": "text/markdown",
              "value": "Connect to untrusted origins over HTTP/1 only, with `protocols: [:http1]` in `Mint.HTTP.connect/4`, which never runs the HTTP/2 frame decoder. Finch and Req pools use HTTP/1 only unless `:http2` is added to their `protocols` option."
            }
          ],
          "value": "Connect to untrusted origins over HTTP/1 only, with protocols: [:http1] in Mint.HTTP.connect/4, which never runs the HTTP/2 frame decoder. Finch and Req pools use HTTP/1 only unless :http2 is added to their protocols option."
        }
      ],
      "x_proofOfConcept": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "\u003col\u003e\n\u003cli\u003eBuild an HTTP/2 frame header whose 24-bit length field declares 1,000,000 bytes, above the default \u003ccode\u003emax_frame_size\u003c/code\u003e of 16,384.\u003c/li\u003e\n\u003cli\u003ePass the header followed by 16,384 and then 512,000 payload bytes to \u003ccode\u003eMint.HTTP2.Frame.decode_next/2\u003c/code\u003e with a limit of 16,384. Each call returns \u003ccode\u003e:more\u003c/code\u003e, which makes \u003ccode\u003eMint.HTTP2\u003c/code\u003e keep the bytes in \u003ccode\u003econn.buffer\u003c/code\u003e.\u003c/li\u003e\n\u003cli\u003ePass the header with the complete 1,000,000-byte payload. Only this call returns \u003ccode\u003e{:error, :payload_too_big}\u003c/code\u003e.\u003c/li\u003e\n\u003c/ol\u003e"
            },
            {
              "base64": false,
              "type": "text/markdown",
              "value": "1. Build an HTTP/2 frame header whose 24-bit length field declares 1,000,000 bytes, above the default `max_frame_size` of 16,384.\n2. Pass the header followed by 16,384 and then 512,000 payload bytes to `Mint.HTTP2.Frame.decode_next/2` with a limit of 16,384. Each call returns `:more`, which makes `Mint.HTTP2` keep the bytes in `conn.buffer`.\n3. Pass the header with the complete 1,000,000-byte payload. Only this call returns `{:error, :payload_too_big}`."
            }
          ],
          "value": "* Build an HTTP/2 frame header whose 24-bit length field declares 1,000,000 bytes, above the default max_frame_size of 16,384.\n* Pass the header followed by 16,384 and then 512,000 payload bytes to Mint.HTTP2.Frame.decode_next/2 with a limit of 16,384. Each call returns :more, which makes Mint.HTTP2 keep the bytes in conn.buffer.\n* Pass the header with the complete 1,000,000-byte payload. Only this call returns {:error, :payload_too_big}."
        }
      ],
      "x_technicalAnalysis": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "\u003cp\u003e\u003cstrong\u003e1. Late size check.\u003c/strong\u003e \u003ccode\u003eMint.HTTP2.Frame.decode_next/2\u003c/code\u003e calls \u003ccode\u003edecode_next_raw/1\u003c/code\u003e, whose binary pattern only matches once the full declared payload is present. The \u003ccode\u003emax_frame_size\u003c/code\u003e guard runs on the matched payload, so a partial frame of any declared length returns \u003ccode\u003e:more\u003c/code\u003e.\u003c/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. Unbounded buffering.\u003c/strong\u003e On \u003ccode\u003e:more\u003c/code\u003e, \u003ccode\u003eMint.HTTP2.handle_new_data/3\u003c/code\u003e stores the accumulated data in \u003ccode\u003econn.buffer\u003c/code\u003e, and \u003ccode\u003emaybe_concat_and_handle_new_data/2\u003c/code\u003e prepends it to every later socket read, in both \u003ccode\u003estream/2\u003c/code\u003e (active mode) and \u003ccode\u003erecv/3\u003c/code\u003e (passive mode). Nothing caps the buffer.\u003c/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. No release.\u003c/strong\u003e Mint has no idle timer. In active mode the buffer is held until the caller closes the connection. In passive mode a \u003ccode\u003erecv/3\u003c/code\u003e timeout closes it, but a server that sends a byte within each timeout keeps it open. \u003ccode\u003emax_frame_size\u003c/code\u003e can\u0027t be set below the 16,384-byte protocol minimum, and no setting moves the check earlier.\u003c/p\u003e"
            },
            {
              "base64": false,
              "type": "text/markdown",
              "value": "**1. Late size check.** `Mint.HTTP2.Frame.decode_next/2` calls `decode_next_raw/1`, whose binary pattern only matches once the full declared payload is present. The `max_frame_size` guard runs on the matched payload, so a partial frame of any declared length returns `:more`.\n\n**2. Unbounded buffering.** On `:more`, `Mint.HTTP2.handle_new_data/3` stores the accumulated data in `conn.buffer`, and `maybe_concat_and_handle_new_data/2` prepends it to every later socket read, in both `stream/2` (active mode) and `recv/3` (passive mode). Nothing caps the buffer.\n\n**3. No release.** Mint has no idle timer. In active mode the buffer is held until the caller closes the connection. In passive mode a `recv/3` timeout closes it, but a server that sends a byte within each timeout keeps it open. `max_frame_size` can\u0027t be set below the 16,384-byte protocol minimum, and no setting moves the check earlier."
            }
          ],
          "value": "1. Late size check. Mint.HTTP2.Frame.decode_next/2 calls decode_next_raw/1, whose binary pattern only matches once the full declared payload is present. The max_frame_size guard runs on the matched payload, so a partial frame of any declared length returns :more.\n\n2. Unbounded buffering. On :more, Mint.HTTP2.handle_new_data/3 stores the accumulated data in conn.buffer, and maybe_concat_and_handle_new_data/2 prepends it to every later socket read, in both stream/2 (active mode) and recv/3 (passive mode). Nothing caps the buffer.\n\n3. No release. Mint has no idle timer. In active mode the buffer is held until the caller closes the connection. In passive mode a recv/3 timeout closes it, but a server that sends a byte within each timeout keeps it open. max_frame_size can\u0027t be set below the 16,384-byte protocol minimum, and no setting moves the check earlier."
        }
      ]
    }
  },
  "cveMetadata": {
    "assignerOrgId": "6b3ad84c-e1a6-4bf7-a703-f496b71e49db",
    "assignerShortName": "EEF",
    "cveId": "CVE-2026-92103",
    "datePublished": "2026-09-28T11:15:20.657Z",
    "dateReserved": "2026-09-15T16:00:01.513Z",
    "dateUpdated": "2026-09-30T15:00:38.567Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "vulnrichment": {
      "containers": "{\"adp\": [{\"title\": \"CISA ADP Vulnrichment\", \"metrics\": [{\"other\": {\"type\": \"ssvc\", \"content\": {\"id\": \"CVE-2026-92103\", \"role\": \"CISA Coordinator\", \"options\": [{\"Exploitation\": \"poc\"}, {\"Automatable\": \"no\"}, {\"Technical Impact\": \"partial\"}], \"version\": \"2.0.3\", \"timestamp\": \"2026-09-30T15:00:25.491334Z\"}}}], \"providerMetadata\": {\"orgId\": \"134c704f-9b21-4f2e-91b3-4a467353bcc0\", \"shortName\": \"CISA-ADP\", \"dateUpdated\": \"2026-09-30T15:00:31.002Z\"}}], \"cna\": {\"title\": \"Mint HTTP/2 client buffers oversized frames up to 16 MiB before enforcing max_frame_size\", \"source\": {\"discovery\": \"EXTERNAL\"}, \"credits\": [{\"lang\": \"en\", \"type\": \"finder\", \"value\": \"zx\"}, {\"lang\": \"en\", \"type\": \"reporter\", \"value\": \"zx\"}, {\"lang\": \"en\", \"type\": \"remediation developer\", \"value\": \"Andrea Leopardi\"}, {\"lang\": \"en\", \"type\": \"remediation reviewer\", \"value\": \"Eric Meadows-J\\u00f6nsson\"}], \"impacts\": [{\"capecId\": \"CAPEC-130\", \"descriptions\": [{\"lang\": \"en\", \"value\": \"A malicious or compromised HTTP/2 server can make a Mint client keep up to about 16 MiB per connection buffered, and keep it there while the connection stays open. Clients that hold many HTTP/2 connections to attacker-influenced origins, such as webhook senders, crawlers and proxies, can run out of memory.\", \"supportingMedia\": [{\"type\": \"text/html\", \"value\": \"\u003cp\u003eA malicious or compromised HTTP/2 server can make a Mint client keep up to about 16 MiB per connection buffered, and keep it there while the connection stays open. Clients that hold many HTTP/2 connections to attacker-influenced origins, such as webhook senders, crawlers and proxies, can run out of memory.\u003c/p\u003e\", \"base64\": false}, {\"type\": \"text/markdown\", \"value\": \"A malicious or compromised HTTP/2 server can make a Mint client keep up to about 16 MiB per connection buffered, and keep it there while the connection stays open. Clients that hold many HTTP/2 connections to attacker-influenced origins, such as webhook senders, crawlers and proxies, can run out of memory.\", \"base64\": false}]}]}], \"metrics\": [{\"format\": \"CVSS\", \"cvssV4_0\": {\"Safety\": \"NOT_DEFINED\", \"version\": \"4.0\", \"Recovery\": \"NOT_DEFINED\", \"baseScore\": 6.3, \"Automatable\": \"NOT_DEFINED\", \"attackVector\": \"NETWORK\", \"baseSeverity\": \"MEDIUM\", \"valueDensity\": \"NOT_DEFINED\", \"vectorString\": \"CVSS:4.0/AV:N/AC:L/AT:P/PR:N/UI:N/VC:N/VI:N/VA:L/SC:N/SI:N/SA:N\", \"providerUrgency\": \"NOT_DEFINED\", \"userInteraction\": \"NONE\", \"attackComplexity\": \"LOW\", \"attackRequirements\": \"PRESENT\", \"privilegesRequired\": \"NONE\", \"subIntegrityImpact\": \"NONE\", \"vulnIntegrityImpact\": \"NONE\", \"subAvailabilityImpact\": \"NONE\", \"vulnAvailabilityImpact\": \"LOW\", \"subConfidentialityImpact\": \"NONE\", \"vulnConfidentialityImpact\": \"NONE\", \"vulnerabilityResponseEffort\": \"NOT_DEFINED\"}, \"scenarios\": [{\"lang\": \"en\", \"value\": \"GENERAL\"}]}], \"affected\": [{\"cpes\": [\"cpe:2.3:a:elixir-mint:mint:*:*:*:*:*:*:*:*\"], \"repo\": \"https://github.com/elixir-mint/mint\", \"vendor\": \"elixir-mint\", \"modules\": [\"\u0027Elixir.Mint.HTTP2.Frame\u0027\", \"\u0027Elixir.Mint.HTTP2\u0027\"], \"product\": \"mint\", \"versions\": [{\"status\": \"affected\", \"version\": \"0.1.0\", \"lessThan\": \"1.10.2\", \"versionType\": \"semver\"}], \"packageURL\": \"pkg:hex/mint\", \"packageName\": \"mint\", \"programFiles\": [\"lib/mint/http2/frame.ex\", \"lib/mint/http2.ex\"], \"collectionURL\": \"https://repo.hex.pm\", \"defaultStatus\": \"unaffected\", \"programRoutines\": [{\"name\": \"\u0027Elixir.Mint.HTTP2.Frame\u0027:decode_next/2\"}, {\"name\": \"\u0027Elixir.Mint.HTTP2\u0027:stream/2\"}, {\"name\": \"\u0027Elixir.Mint.HTTP2\u0027:recv/3\"}, {\"name\": \"\u0027Elixir.Mint.HTTP2\u0027:handle_new_data/3\"}]}, {\"cpes\": [\"cpe:2.3:a:elixir-mint:mint:*:*:*:*:*:*:*:*\"], \"repo\": \"https://github.com/elixir-mint/mint\", \"vendor\": \"elixir-mint\", \"modules\": [\"\u0027Elixir.Mint.HTTP2.Frame\u0027\", \"\u0027Elixir.Mint.HTTP2\u0027\"], \"product\": \"mint\", \"versions\": [{\"status\": \"affected\", \"changes\": [{\"at\": \"20252ca85065f4d1092aed9ee4ed21841a507dfe\", \"status\": \"unaffected\"}, {\"at\": \"44d7ce4755d0444ee415cbcca7ce4942382da4dd\", \"status\": \"unaffected\"}], \"version\": \"596ca4304504be68939c4929e0831557097962b8\", \"lessThan\": \"*\", \"versionType\": \"git\"}], \"packageURL\": \"pkg:github/elixir-mint/mint\", \"packageName\": \"elixir-mint/mint\", \"programFiles\": [\"lib/mint/http2/frame.ex\", \"lib/mint/http2.ex\"], \"collectionURL\": \"https://github.com\", \"defaultStatus\": \"unaffected\", \"programRoutines\": [{\"name\": \"\u0027Elixir.Mint.HTTP2.Frame\u0027:decode_next/2\"}, {\"name\": \"\u0027Elixir.Mint.HTTP2\u0027:stream/2\"}, {\"name\": \"\u0027Elixir.Mint.HTTP2\u0027:recv/3\"}, {\"name\": \"\u0027Elixir.Mint.HTTP2\u0027:handle_new_data/3\"}]}], \"datePublic\": \"2026-09-28T11:15:20.000Z\", \"references\": [{\"url\": \"https://github.com/elixir-mint/mint/security/advisories/GHSA-q95c-ccq6-j5j6\", \"name\": \"GitHub Advisory\", \"tags\": [\"related\", \"vendor-advisory\"]}, {\"url\": \"https://cna.erlef.org/cves/CVE-2026-92103.html\", \"name\": \"EEF CNA record for CVE-2026-92103\", \"tags\": [\"related\"]}, {\"url\": \"https://osv.dev/vulnerability/EEF-CVE-2026-92103\", \"name\": \"OSV record EEF-CVE-2026-92103\", \"tags\": [\"related\"]}, {\"url\": \"https://github.com/elixir-mint/mint/commit/596ca4304504be68939c4929e0831557097962b8\", \"name\": \"Introducing commit 596ca43 in elixir-mint/mint\", \"tags\": [\"related\"]}, {\"url\": \"https://github.com/elixir-mint/mint/commit/20252ca85065f4d1092aed9ee4ed21841a507dfe\", \"name\": \"Fix commit 20252ca in elixir-mint/mint\", \"tags\": [\"patch\"]}, {\"url\": \"https://github.com/elixir-mint/mint/commit/44d7ce4755d0444ee415cbcca7ce4942382da4dd\", \"name\": \"Fix commit 44d7ce4 in elixir-mint/mint\", \"tags\": [\"patch\"]}], \"workarounds\": [{\"lang\": \"en\", \"value\": \"Connect to untrusted origins over HTTP/1 only, with protocols: [:http1] in Mint.HTTP.connect/4, which never runs the HTTP/2 frame decoder. Finch and Req pools use HTTP/1 only unless :http2 is added to their protocols option.\", \"supportingMedia\": [{\"type\": \"text/html\", \"value\": \"\u003cp\u003eConnect to untrusted origins over HTTP/1 only, with \u003ccode\u003eprotocols: [:http1]\u003c/code\u003e in \u003ccode\u003eMint.HTTP.connect/4\u003c/code\u003e, which never runs the HTTP/2 frame decoder. Finch and Req pools use HTTP/1 only unless \u003ccode\u003e:http2\u003c/code\u003e is added to their \u003ccode\u003eprotocols\u003c/code\u003e option.\u003c/p\u003e\", \"base64\": false}, {\"type\": \"text/markdown\", \"value\": \"Connect to untrusted origins over HTTP/1 only, with `protocols: [:http1]` in `Mint.HTTP.connect/4`, which never runs the HTTP/2 frame decoder. Finch and Req pools use HTTP/1 only unless `:http2` is added to their `protocols` option.\", \"base64\": false}]}], \"dateAssigned\": \"2026-09-24T09:19:17.000Z\", \"descriptions\": [{\"lang\": \"en\", \"value\": \"Allocation of Resources Without Limits or Throttling vulnerability in elixir-mint mint allows a malicious HTTP/2 server to make the client hold up to about 16 MiB per connection in frames it should reject, consuming client memory.\\n\\nMint.HTTP2.Frame.decode_next/2 in lib/mint/http2/frame.ex compares a frame with the client\u0027s max_frame_size (16,384 bytes by default) only once the whole declared payload has arrived. Until then it returns :more, and Mint.HTTP2 keeps every received byte in the connection buffer. A server can declare a frame length of up to 16,777,215 bytes and withhold the last byte, keeping roughly 1,024 times the advertised limit buffered for as long as the connection stays open. The server has to send every byte the client buffers, so there is no amplification, and the buffer stops at the 24-bit frame length limit.\\n\\nThis issue affects mint: from 0.1.0 before 1.10.2.\", \"supportingMedia\": [{\"type\": \"text/html\", \"value\": \"\u003cp\u003eAllocation of Resources Without Limits or Throttling vulnerability in elixir-mint mint allows a malicious HTTP/2 server to make the client hold up to about 16 MiB per connection in frames it should reject, consuming client memory.\u003c/p\u003e\\n\u003cp\u003e\u003ccode\u003eMint.HTTP2.Frame.decode_next/2\u003c/code\u003e in \u003ccode\u003elib/mint/http2/frame.ex\u003c/code\u003e compares a frame with the client\u0027s \u003ccode\u003emax_frame_size\u003c/code\u003e (16,384 bytes by default) only once the whole declared payload has arrived. Until then it returns \u003ccode\u003e:more\u003c/code\u003e, and \u003ccode\u003eMint.HTTP2\u003c/code\u003e keeps every received byte in the connection buffer. A server can declare a frame length of up to 16,777,215 bytes and withhold the last byte, keeping roughly 1,024 times the advertised limit buffered for as long as the connection stays open. The server has to send every byte the client buffers, so there is no amplification, and the buffer stops at the 24-bit frame length limit.\u003c/p\u003e\\n\u003cp\u003eThis issue affects mint: from 0.1.0 before 1.10.2.\u003c/p\u003e\", \"base64\": false}, {\"type\": \"text/markdown\", \"value\": \"Allocation of Resources Without Limits or Throttling vulnerability in elixir-mint mint allows a malicious HTTP/2 server to make the client hold up to about 16 MiB per connection in frames it should reject, consuming client memory.\\n\\n`Mint.HTTP2.Frame.decode_next/2` in `lib/mint/http2/frame.ex` compares a frame with the client\u0027s `max_frame_size` (16,384 bytes by default) only once the whole declared payload has arrived. Until then it returns `:more`, and `Mint.HTTP2` keeps every received byte in the connection buffer. A server can declare a frame length of up to 16,777,215 bytes and withhold the last byte, keeping roughly 1,024 times the advertised limit buffered for as long as the connection stays open. The server has to send every byte the client buffers, so there is no amplification, and the buffer stops at the 24-bit frame length limit.\\n\\nThis issue affects mint: from 0.1.0 before 1.10.2.\", \"base64\": false}]}], \"problemTypes\": [{\"descriptions\": [{\"lang\": \"en\", \"type\": \"CWE\", \"cweId\": \"CWE-770\", \"description\": \"CWE-770 Allocation of Resources Without Limits or Throttling\"}]}], \"cpeApplicability\": [{\"nodes\": [{\"negate\": false, \"cpeMatch\": [{\"criteria\": \"cpe:2.3:a:elixir-mint:mint:*:*:*:*:*:*:*:*\", \"vulnerable\": true, \"versionEndExcluding\": \"1.10.2\", \"versionStartIncluding\": \"0.1.0\"}], \"operator\": \"OR\"}], \"operator\": \"AND\"}], \"providerMetadata\": {\"orgId\": \"6b3ad84c-e1a6-4bf7-a703-f496b71e49db\", \"shortName\": \"EEF\", \"dateUpdated\": \"2026-09-29T10:15:35.604Z\"}, \"x_proofOfConcept\": [{\"lang\": \"en\", \"value\": \"* Build an HTTP/2 frame header whose 24-bit length field declares 1,000,000 bytes, above the default max_frame_size of 16,384.\\n* Pass the header followed by 16,384 and then 512,000 payload bytes to Mint.HTTP2.Frame.decode_next/2 with a limit of 16,384. Each call returns :more, which makes Mint.HTTP2 keep the bytes in conn.buffer.\\n* Pass the header with the complete 1,000,000-byte payload. Only this call returns {:error, :payload_too_big}.\", \"supportingMedia\": [{\"type\": \"text/html\", \"value\": \"\u003col\u003e\\n\u003cli\u003eBuild an HTTP/2 frame header whose 24-bit length field declares 1,000,000 bytes, above the default \u003ccode\u003emax_frame_size\u003c/code\u003e of 16,384.\u003c/li\u003e\\n\u003cli\u003ePass the header followed by 16,384 and then 512,000 payload bytes to \u003ccode\u003eMint.HTTP2.Frame.decode_next/2\u003c/code\u003e with a limit of 16,384. Each call returns \u003ccode\u003e:more\u003c/code\u003e, which makes \u003ccode\u003eMint.HTTP2\u003c/code\u003e keep the bytes in \u003ccode\u003econn.buffer\u003c/code\u003e.\u003c/li\u003e\\n\u003cli\u003ePass the header with the complete 1,000,000-byte payload. Only this call returns \u003ccode\u003e{:error, :payload_too_big}\u003c/code\u003e.\u003c/li\u003e\\n\u003c/ol\u003e\", \"base64\": false}, {\"type\": \"text/markdown\", \"value\": \"1. Build an HTTP/2 frame header whose 24-bit length field declares 1,000,000 bytes, above the default `max_frame_size` of 16,384.\\n2. Pass the header followed by 16,384 and then 512,000 payload bytes to `Mint.HTTP2.Frame.decode_next/2` with a limit of 16,384. Each call returns `:more`, which makes `Mint.HTTP2` keep the bytes in `conn.buffer`.\\n3. Pass the header with the complete 1,000,000-byte payload. Only this call returns `{:error, :payload_too_big}`.\", \"base64\": false}]}], \"x_technicalAnalysis\": [{\"lang\": \"en\", \"value\": \"1. Late size check. Mint.HTTP2.Frame.decode_next/2 calls decode_next_raw/1, whose binary pattern only matches once the full declared payload is present. The max_frame_size guard runs on the matched payload, so a partial frame of any declared length returns :more.\\n\\n2. Unbounded buffering. On :more, Mint.HTTP2.handle_new_data/3 stores the accumulated data in conn.buffer, and maybe_concat_and_handle_new_data/2 prepends it to every later socket read, in both stream/2 (active mode) and recv/3 (passive mode). Nothing caps the buffer.\\n\\n3. No release. Mint has no idle timer. In active mode the buffer is held until the caller closes the connection. In passive mode a recv/3 timeout closes it, but a server that sends a byte within each timeout keeps it open. max_frame_size can\u0027t be set below the 16,384-byte protocol minimum, and no setting moves the check earlier.\", \"supportingMedia\": [{\"type\": \"text/html\", \"value\": \"\u003cp\u003e\u003cstrong\u003e1. Late size check.\u003c/strong\u003e \u003ccode\u003eMint.HTTP2.Frame.decode_next/2\u003c/code\u003e calls \u003ccode\u003edecode_next_raw/1\u003c/code\u003e, whose binary pattern only matches once the full declared payload is present. The \u003ccode\u003emax_frame_size\u003c/code\u003e guard runs on the matched payload, so a partial frame of any declared length returns \u003ccode\u003e:more\u003c/code\u003e.\u003c/p\u003e\\n\u003cp\u003e\u003cstrong\u003e2. Unbounded buffering.\u003c/strong\u003e On \u003ccode\u003e:more\u003c/code\u003e, \u003ccode\u003eMint.HTTP2.handle_new_data/3\u003c/code\u003e stores the accumulated data in \u003ccode\u003econn.buffer\u003c/code\u003e, and \u003ccode\u003emaybe_concat_and_handle_new_data/2\u003c/code\u003e prepends it to every later socket read, in both \u003ccode\u003estream/2\u003c/code\u003e (active mode) and \u003ccode\u003erecv/3\u003c/code\u003e (passive mode). Nothing caps the buffer.\u003c/p\u003e\\n\u003cp\u003e\u003cstrong\u003e3. No release.\u003c/strong\u003e Mint has no idle timer. In active mode the buffer is held until the caller closes the connection. In passive mode a \u003ccode\u003erecv/3\u003c/code\u003e timeout closes it, but a server that sends a byte within each timeout keeps it open. \u003ccode\u003emax_frame_size\u003c/code\u003e can\u0027t be set below the 16,384-byte protocol minimum, and no setting moves the check earlier.\u003c/p\u003e\", \"base64\": false}, {\"type\": \"text/markdown\", \"value\": \"**1. Late size check.** `Mint.HTTP2.Frame.decode_next/2` calls `decode_next_raw/1`, whose binary pattern only matches once the full declared payload is present. The `max_frame_size` guard runs on the matched payload, so a partial frame of any declared length returns `:more`.\\n\\n**2. Unbounded buffering.** On `:more`, `Mint.HTTP2.handle_new_data/3` stores the accumulated data in `conn.buffer`, and `maybe_concat_and_handle_new_data/2` prepends it to every later socket read, in both `stream/2` (active mode) and `recv/3` (passive mode). Nothing caps the buffer.\\n\\n**3. No release.** Mint has no idle timer. In active mode the buffer is held until the caller closes the connection. In passive mode a `recv/3` timeout closes it, but a server that sends a byte within each timeout keeps it open. `max_frame_size` can\u0027t be set below the 16,384-byte protocol minimum, and no setting moves the check earlier.\", \"base64\": false}]}]}}",
      "cveMetadata": "{\"cveId\": \"CVE-2026-92103\", \"state\": \"PUBLISHED\", \"dateUpdated\": \"2026-09-30T15:00:38.567Z\", \"dateReserved\": \"2026-09-15T16:00:01.513Z\", \"assignerOrgId\": \"6b3ad84c-e1a6-4bf7-a703-f496b71e49db\", \"datePublished\": \"2026-09-28T11:15:20.657Z\", \"assignerShortName\": \"EEF\"}",
      "dataType": "CVE_RECORD",
      "dataVersion": "5.2"
    }
  }
}