CVE-2026-74555 (GCVE-0-2026-74555)
Vulnerability from cvelistv5
Published
2026-08-15 12:28
Modified
2026-08-19 16:38
Severity ?
Summary
In the Linux kernel, the following vulnerability has been resolved: scsi: libsas: Fix HA resume deadlock and hisi_sas disk-wake race Commit fbefe22811c3 ("scsi: libsas: Don't always drain event workqueue for HA resume") introduced sas_resume_ha_no_sync() to avoid a deadlock: the PHYE_RESUME_TIMEOUT handler, running on the HA event workqueue, calls sas_deform_port() -> sas_destruct_devices(), which removes SCSI devices and waits for the host to become runtime-active. But the host cannot resume until sas_resume_ha() -> sas_drain_work() returns, and the drain is blocked on that very handler. However skipping the drain reintroduces a race: hisi_sas returns from resume before all PHY UP work and libsas discovery work finish. The controller may then autosuspend while disks are still waking up. The disks issue IO to a suspended controller, the IO fails, and the disks get disabled. Fix the deadlock at its source by moving the PHYE_RESUME_TIMEOUT notification to after sas_drain_work(). By then the host resume is about to complete, so device removal through device_link no longer blocks on the resume and the cycle is broken. With the deadlock gone, restore sas_resume_ha() (the draining variant) in hisi_sas and remove sas_resume_ha_no_sync(). The reorder is safe for the other libsas consumers (isci, pm8001, aic94xx, mvsas). During suspend, sas_suspend_devices() calls sas_notify_lldd_dev_gone() for each device, which sets dev->lldd_dev to NULL. When scsi_unblock_requests re-enables I/O in resume, any I/O to a timed-out phy's disk is immediately rejected by the LLDD before reaching hardware: isci returns SAS_DEVICE_UNKNOWN (mapped to DID_BAD_TARGET), and pm8001 returns SAS_PHY_DOWN (mapped to DID_NO_CONNECT). Both complete directly via scsi_done() without entering SCSI EH. This is identical in both the old and new ordering since lldd_dev_gone runs during suspend, before resume. The reorder only affects when the PHYE_RESUME_TIMEOUT handler runs (synchronized by sas_drain_work() vs. asynchronous after resume returns), not whether I/O can reach the device. aic94xx and mvsas do not register any PM ops and never reach this code path.
Impacted products
Vendor Product Version
Linux Linux Version: fbefe22811c3140a686e407e114789ebf328a9a2
Version: fbefe22811c3140a686e407e114789ebf328a9a2
Version: fbefe22811c3140a686e407e114789ebf328a9a2
Version: fbefe22811c3140a686e407e114789ebf328a9a2
Version: fbefe22811c3140a686e407e114789ebf328a9a2
Version: fbefe22811c3140a686e407e114789ebf328a9a2
Create a notification for this product.
Show details on NVD website


{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/scsi/hisi_sas/hisi_sas_v3_hw.c",
            "drivers/scsi/libsas/sas_init.c",
            "include/scsi/libsas.h"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "09357f067122e2e28ec52e27013a1660a1571618",
              "status": "affected",
              "version": "fbefe22811c3140a686e407e114789ebf328a9a2",
              "versionType": "git"
            },
            {
              "lessThan": "e50a6523a603594a6d92cdecfe11997d639410a3",
              "status": "affected",
              "version": "fbefe22811c3140a686e407e114789ebf328a9a2",
              "versionType": "git"
            },
            {
              "lessThan": "c391b5899dd46485a5893696c12ae3e95a3a7325",
              "status": "affected",
              "version": "fbefe22811c3140a686e407e114789ebf328a9a2",
              "versionType": "git"
            },
            {
              "lessThan": "9e24b47ef81d43b3fb1b14294f09991640c79fcc",
              "status": "affected",
              "version": "fbefe22811c3140a686e407e114789ebf328a9a2",
              "versionType": "git"
            },
            {
              "lessThan": "b9c44a14062093e9fc2d6bddc696cfceadb482d7",
              "status": "affected",
              "version": "fbefe22811c3140a686e407e114789ebf328a9a2",
              "versionType": "git"
            },
            {
              "lessThan": "3dbbbf656b850c9c8de05df6ad4a1dfc6ff02845",
              "status": "affected",
              "version": "fbefe22811c3140a686e407e114789ebf328a9a2",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/scsi/hisi_sas/hisi_sas_v3_hw.c",
            "drivers/scsi/libsas/sas_init.c",
            "include/scsi/libsas.h"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "5.17"
            },
            {
              "lessThan": "5.17",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.1.*",
              "status": "unaffected",
              "version": "6.1.183",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.6.*",
              "status": "unaffected",
              "version": "6.6.151",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.103",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.44",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "7.1.*",
              "status": "unaffected",
              "version": "7.1.8",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.2",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.1.183",
                  "versionStartIncluding": "5.17",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.6.151",
                  "versionStartIncluding": "5.17",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.12.103",
                  "versionStartIncluding": "5.17",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.18.44",
                  "versionStartIncluding": "5.17",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.1.8",
                  "versionStartIncluding": "5.17",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.2",
                  "versionStartIncluding": "5.17",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nscsi: libsas: Fix HA resume deadlock and hisi_sas disk-wake race\n\nCommit fbefe22811c3 (\"scsi: libsas: Don\u0027t always drain event workqueue\nfor HA resume\") introduced sas_resume_ha_no_sync() to avoid a deadlock:\nthe PHYE_RESUME_TIMEOUT handler, running on the HA event workqueue,\ncalls sas_deform_port() -\u003e sas_destruct_devices(), which removes SCSI\ndevices and waits for the host to become runtime-active. But the host\ncannot resume until sas_resume_ha() -\u003e sas_drain_work() returns, and the\ndrain is blocked on that very handler.\n\nHowever skipping the drain reintroduces a race: hisi_sas returns from\nresume before all PHY UP work and libsas discovery work finish. The\ncontroller may then autosuspend while disks are still waking up. The\ndisks issue IO to a suspended controller, the IO fails, and the disks\nget disabled.\n\nFix the deadlock at its source by moving the PHYE_RESUME_TIMEOUT\nnotification to after sas_drain_work(). By then the host resume is about\nto complete, so device removal through device_link no longer blocks on\nthe resume and the cycle is broken.\n\nWith the deadlock gone, restore sas_resume_ha() (the draining variant)\nin hisi_sas and remove sas_resume_ha_no_sync().\n\nThe reorder is safe for the other libsas consumers (isci, pm8001,\naic94xx, mvsas). During suspend, sas_suspend_devices() calls\nsas_notify_lldd_dev_gone() for each device, which sets dev-\u003elldd_dev to\nNULL. When scsi_unblock_requests re-enables I/O in resume, any I/O to a\ntimed-out phy\u0027s disk is immediately rejected by the LLDD before reaching\nhardware: isci returns SAS_DEVICE_UNKNOWN (mapped to DID_BAD_TARGET),\nand pm8001 returns SAS_PHY_DOWN (mapped to DID_NO_CONNECT). Both\ncomplete directly via scsi_done() without entering SCSI EH. This is\nidentical in both the old and new ordering since lldd_dev_gone runs\nduring suspend, before resume. The reorder only affects when the\nPHYE_RESUME_TIMEOUT handler runs (synchronized by sas_drain_work()\nvs. asynchronous after resume returns), not whether I/O can reach the\ndevice. aic94xx and mvsas do not register any PM ops and never reach\nthis code path."
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-08-19T16:38:54.912Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/09357f067122e2e28ec52e27013a1660a1571618"
        },
        {
          "url": "https://git.kernel.org/stable/c/e50a6523a603594a6d92cdecfe11997d639410a3"
        },
        {
          "url": "https://git.kernel.org/stable/c/c391b5899dd46485a5893696c12ae3e95a3a7325"
        },
        {
          "url": "https://git.kernel.org/stable/c/9e24b47ef81d43b3fb1b14294f09991640c79fcc"
        },
        {
          "url": "https://git.kernel.org/stable/c/b9c44a14062093e9fc2d6bddc696cfceadb482d7"
        },
        {
          "url": "https://git.kernel.org/stable/c/3dbbbf656b850c9c8de05df6ad4a1dfc6ff02845"
        }
      ],
      "title": "scsi: libsas: Fix HA resume deadlock and hisi_sas disk-wake race",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2026-74555",
    "datePublished": "2026-08-15T12:28:00.729Z",
    "dateReserved": "2026-08-15T05:44:03.916Z",
    "dateUpdated": "2026-08-19T16:38:54.912Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.


Loading…

Loading…