CVE-2024-21600 (GCVE-0-2024-21600)
Vulnerability from cvelistv5
Published
2024-01-12 00:53
Modified
2025-06-17 21:09
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-76 - Improper Neutralization of Equivalent Special Elements
- Denial of Service (DoS)
Summary
An Improper Neutralization of Equivalent Special Elements vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on PTX Series allows a unauthenticated, adjacent attacker to cause a Denial of Service (DoS).
When MPLS packets are meant to be sent to a flexible tunnel interface (FTI) and if the FTI tunnel is down, these will hit the reject NH, due to which the packets get sent to the CPU and cause a host path wedge condition. This will cause the FPC to hang and requires a manual restart to recover.
Please note that this issue specifically affects PTX1000, PTX3000, PTX5000 with FPC3, PTX10002-60C, and PTX10008/16 with LC110x. Other PTX Series devices and Line Cards (LC) are not affected.
The following log message can be seen when the issue occurs:
Cmerror Op Set: Host Loopback: HOST LOOPBACK WEDGE DETECTED IN PATH ID <id> (URI: /fpc/<fpc>/pfe/<pfe>/cm/<cm>/Host_Loopback/<cm>/HOST_LOOPBACK_MAKE_CMERROR_ID[<id>])
This issue affects Juniper Networks Junos OS:
* All versions earlier than 20.4R3-S8;
* 21.1 versions earlier than 21.1R3-S4;
* 21.2 versions earlier than 21.2R3-S6;
* 21.3 versions earlier than 21.3R3-S3;
* 21.4 versions earlier than 21.4R3-S5;
* 22.1 versions earlier than 22.1R2-S2, 22.1R3;
* 22.2 versions earlier than 22.2R2-S1, 22.2R3.
References
| ► | URL | Tags | ||||||
|---|---|---|---|---|---|---|---|---|
|
||||||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Juniper Networks | Junos OS |
Version: 0 ≤ Version: 21.1 ≤ Version: 21.2 ≤ Version: 21.3 ≤ Version: 21.4 ≤ Version: 22.1 ≤ Version: 22.2 ≤ |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-01T22:27:35.359Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"tags": [
"vendor-advisory",
"x_transferred"
],
"url": "https://supportportal.juniper.net/JSA75741"
},
{
"tags": [
"technical-description",
"x_transferred"
],
"url": "https://www.first.org/cvss/calculator/4.0#CVSS:4.0/AV:A/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:L"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2024-21600",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2024-01-12T18:09:08.163929Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2025-06-17T21:09:19.373Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"platforms": [
"PTX1000",
"PTX3000",
"PTX5000 with FPC3",
"PTX10002-60C",
"PTX10008/16 with LC110x"
],
"product": "Junos OS",
"vendor": "Juniper Networks",
"versions": [
{
"lessThan": "20.4R3-S8",
"status": "affected",
"version": "0",
"versionType": "semver"
},
{
"lessThan": "21.1R3-S4",
"status": "affected",
"version": "21.1",
"versionType": "semver"
},
{
"lessThan": "21.2R3-S6",
"status": "affected",
"version": "21.2",
"versionType": "semver"
},
{
"lessThan": "21.3R3-S3",
"status": "affected",
"version": "21.3",
"versionType": "semver"
},
{
"lessThan": "21.4R3-S5",
"status": "affected",
"version": "21.4",
"versionType": "semver"
},
{
"lessThan": "22.1R2-S2, 22.1R3",
"status": "affected",
"version": "22.1",
"versionType": "semver"
},
{
"lessThan": "22.2R2-S1, 22.2R3",
"status": "affected",
"version": "22.2",
"versionType": "semver"
}
]
}
],
"configurations": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eTo be exposed to this issue FTI need to be configured:\u003c/p\u003e\u003ccode\u003e [ interfaces fti0 unit \u0026lt;unit\u0026gt; tunnel ... ]\u003c/code\u003e\u003cbr/\u003e"
}
],
"value": "To be exposed to this issue FTI need to be configured:\n\n [ interfaces fti0 unit \u003cunit\u003e tunnel ... ]\n"
}
],
"datePublic": "2024-01-10T17:00:00.000Z",
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\n\n\u003cp\u003eAn Improper Neutralization of Equivalent Special Elements vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on PTX Series allows a unauthenticated, adjacent attacker to cause a Denial of Service (DoS).\u003c/p\u003e\u003cp\u003eWhen MPLS packets are meant to be sent to a flexible tunnel interface (FTI) and if the FTI tunnel is down, these will hit the reject NH, due to which the packets get sent to the CPU and cause a host path wedge condition. This will cause the FPC to hang and requires a manual restart to recover.\u003c/p\u003e\u003cp\u003ePlease note that this issue specifically affects PTX1000, PTX3000, PTX5000 with FPC3, PTX10002-60C, and PTX10008/16 with LC110x. Other PTX Series devices and Line Cards (LC) are not affected.\u003c/p\u003e\u003cp\u003eThe following log message can be seen when the issue occurs:\u003c/p\u003e\u003ccode\u003eCmerror Op Set: Host Loopback: HOST LOOPBACK WEDGE DETECTED IN PATH ID \u0026lt;id\u0026gt; (URI: /fpc/\u0026lt;fpc\u0026gt;/pfe/\u0026lt;pfe\u0026gt;/cm/\u0026lt;cm\u0026gt;/Host_Loopback/\u0026lt;cm\u0026gt;/HOST_LOOPBACK_MAKE_CMERROR_ID[\u0026lt;id\u0026gt;])\u003c/code\u003e\u003cbr\u003e\u003cp\u003eThis issue affects Juniper Networks Junos OS:\u003c/p\u003e\u003cp\u003e\u003c/p\u003e\u003cul\u003e\u003cli\u003eAll versions earlier than 20.4R3-S8;\u003c/li\u003e\u003cli\u003e21.1 versions earlier than 21.1R3-S4;\u003c/li\u003e\u003cli\u003e21.2 versions earlier than 21.2R3-S6;\u003c/li\u003e\u003cli\u003e21.3 versions earlier than 21.3R3-S3;\u003c/li\u003e\u003cli\u003e21.4 versions earlier than 21.4R3-S5;\u003c/li\u003e\u003cli\u003e22.1 versions earlier than 22.1R2-S2, 22.1R3;\u003c/li\u003e\u003cli\u003e22.2 versions earlier than 22.2R2-S1, 22.2R3.\u003c/li\u003e\u003c/ul\u003e\u003cp\u003e\u003c/p\u003e\n\n"
}
],
"value": "\nAn Improper Neutralization of Equivalent Special Elements vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on PTX Series allows a unauthenticated, adjacent attacker to cause a Denial of Service (DoS).\n\nWhen MPLS packets are meant to be sent to a flexible tunnel interface (FTI) and if the FTI tunnel is down, these will hit the reject NH, due to which the packets get sent to the CPU and cause a host path wedge condition. This will cause the FPC to hang and requires a manual restart to recover.\n\nPlease note that this issue specifically affects PTX1000, PTX3000, PTX5000 with FPC3, PTX10002-60C, and PTX10008/16 with LC110x. Other PTX Series devices and Line Cards (LC) are not affected.\n\nThe following log message can be seen when the issue occurs:\n\nCmerror Op Set: Host Loopback: HOST LOOPBACK WEDGE DETECTED IN PATH ID \u003cid\u003e (URI: /fpc/\u003cfpc\u003e/pfe/\u003cpfe\u003e/cm/\u003ccm\u003e/Host_Loopback/\u003ccm\u003e/HOST_LOOPBACK_MAKE_CMERROR_ID[\u003cid\u003e])\nThis issue affects Juniper Networks Junos OS:\n\n\n\n * All versions earlier than 20.4R3-S8;\n * 21.1 versions earlier than 21.1R3-S4;\n * 21.2 versions earlier than 21.2R3-S6;\n * 21.3 versions earlier than 21.3R3-S3;\n * 21.4 versions earlier than 21.4R3-S5;\n * 22.1 versions earlier than 22.1R2-S2, 22.1R3;\n * 22.2 versions earlier than 22.2R2-S1, 22.2R3.\n\n\n\n\n\n\n"
}
],
"exploits": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eJuniper SIRT is not aware of any malicious exploitation of this vulnerability.\u003c/p\u003e"
}
],
"value": "Juniper SIRT is not aware of any malicious exploitation of this vulnerability.\n\n"
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "ADJACENT_NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 6.5,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
},
"format": "CVSS",
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-76",
"description": "CWE-76 Improper Neutralization of Equivalent Special Elements",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"description": "Denial of Service (DoS)",
"lang": "en"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2024-01-12T00:53:38.834Z",
"orgId": "8cbe9d5a-a066-4c94-8978-4b15efeae968",
"shortName": "juniper"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://supportportal.juniper.net/JSA75741"
},
{
"tags": [
"technical-description"
],
"url": "https://www.first.org/cvss/calculator/4.0#CVSS:4.0/AV:A/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:L"
}
],
"solutions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eThe following software releases have been updated to resolve this specific issue: Junos OS 20.4R3-S8, 21.1R3-S4, 21.2R3-S6, 21.3R3-S3, 21.4R3-S5, 22.1R2-S2, 22.1R3, 22.2R2-S1, 22.2R3, 22.3R1, and all subsequent releases.\u003c/p\u003e"
}
],
"value": "The following software releases have been updated to resolve this specific issue: Junos OS 20.4R3-S8, 21.1R3-S4, 21.2R3-S6, 21.3R3-S3, 21.4R3-S5, 22.1R2-S2, 22.1R3, 22.2R2-S1, 22.2R3, 22.3R1, and all subsequent releases.\n\n"
}
],
"source": {
"advisory": "JSA75741",
"defect": [
"1653316"
],
"discovery": "USER"
},
"timeline": [
{
"lang": "en",
"time": "2024-01-10T17:00:00.000Z",
"value": "Initial Publication"
}
],
"title": "Junos OS: PTX Series: In an FTI scenario MPLS packets hitting reject next-hop will cause a host path wedge condition",
"workarounds": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eThe issue can be prevented by configuring a limit for reject packets via:\u003c/p\u003e\u003ccode\u003e [ system ddos-protection protocols reject aggregate bandwidth 20 ] \u003c/code\u003e\u003cbr/\u003e"
}
],
"value": "The issue can be prevented by configuring a limit for reject packets via:\n\n [ system ddos-protection protocols reject aggregate bandwidth 20 ] \n"
}
],
"x_generator": {
"engine": "Vulnogram 0.1.0-av217"
}
}
},
"cveMetadata": {
"assignerOrgId": "8cbe9d5a-a066-4c94-8978-4b15efeae968",
"assignerShortName": "juniper",
"cveId": "CVE-2024-21600",
"datePublished": "2024-01-12T00:53:38.834Z",
"dateReserved": "2023-12-27T19:38:25.706Z",
"dateUpdated": "2025-06-17T21:09:19.373Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1",
"vulnerability-lookup:meta": {
"vulnrichment": {
"containers": "{\"adp\": [{\"title\": \"CVE Program Container\", \"references\": [{\"url\": \"https://supportportal.juniper.net/JSA75741\", \"tags\": [\"vendor-advisory\", \"x_transferred\"]}, {\"url\": \"https://www.first.org/cvss/calculator/4.0#CVSS:4.0/AV:A/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:L\", \"tags\": [\"technical-description\", \"x_transferred\"]}], \"providerMetadata\": {\"orgId\": \"af854a3a-2127-422b-91ae-364da2661108\", \"shortName\": \"CVE\", \"dateUpdated\": \"2024-08-01T22:27:35.359Z\"}}, {\"title\": \"CISA ADP Vulnrichment\", \"metrics\": [{\"other\": {\"type\": \"ssvc\", \"content\": {\"id\": \"CVE-2024-21600\", \"role\": \"CISA Coordinator\", \"options\": [{\"Exploitation\": \"none\"}, {\"Automatable\": \"no\"}, {\"Technical Impact\": \"partial\"}], \"version\": \"2.0.3\", \"timestamp\": \"2024-01-12T18:09:08.163929Z\"}}}], \"providerMetadata\": {\"orgId\": \"134c704f-9b21-4f2e-91b3-4a467353bcc0\", \"shortName\": \"CISA-ADP\", \"dateUpdated\": \"2025-06-17T21:07:38.867Z\"}}], \"cna\": {\"title\": \"Junos OS: PTX Series: In an FTI scenario MPLS packets hitting reject next-hop will cause a host path wedge condition\", \"source\": {\"defect\": [\"1653316\"], \"advisory\": \"JSA75741\", \"discovery\": \"USER\"}, \"metrics\": [{\"format\": \"CVSS\", \"cvssV3_1\": {\"scope\": \"UNCHANGED\", \"version\": \"3.1\", \"baseScore\": 6.5, \"attackVector\": \"ADJACENT_NETWORK\", \"baseSeverity\": \"MEDIUM\", \"vectorString\": \"CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H\", \"integrityImpact\": \"NONE\", \"userInteraction\": \"NONE\", \"attackComplexity\": \"LOW\", \"availabilityImpact\": \"HIGH\", \"privilegesRequired\": \"NONE\", \"confidentialityImpact\": \"NONE\"}, \"scenarios\": [{\"lang\": \"en\", \"value\": \"GENERAL\"}]}], \"affected\": [{\"vendor\": \"Juniper Networks\", \"product\": \"Junos OS\", \"versions\": [{\"status\": \"affected\", \"version\": \"0\", \"lessThan\": \"20.4R3-S8\", \"versionType\": \"semver\"}, {\"status\": \"affected\", \"version\": \"21.1\", \"lessThan\": \"21.1R3-S4\", \"versionType\": \"semver\"}, {\"status\": \"affected\", \"version\": \"21.2\", \"lessThan\": \"21.2R3-S6\", \"versionType\": \"semver\"}, {\"status\": \"affected\", \"version\": \"21.3\", \"lessThan\": \"21.3R3-S3\", \"versionType\": \"semver\"}, {\"status\": \"affected\", \"version\": \"21.4\", \"lessThan\": \"21.4R3-S5\", \"versionType\": \"semver\"}, {\"status\": \"affected\", \"version\": \"22.1\", \"lessThan\": \"22.1R2-S2, 22.1R3\", \"versionType\": \"semver\"}, {\"status\": \"affected\", \"version\": \"22.2\", \"lessThan\": \"22.2R2-S1, 22.2R3\", \"versionType\": \"semver\"}], \"platforms\": [\"PTX1000\", \"PTX3000\", \"PTX5000 with FPC3\", \"PTX10002-60C\", \"PTX10008/16 with LC110x\"], \"defaultStatus\": \"unaffected\"}], \"exploits\": [{\"lang\": \"en\", \"value\": \"Juniper SIRT is not aware of any malicious exploitation of this vulnerability.\\n\\n\", \"supportingMedia\": [{\"type\": \"text/html\", \"value\": \"\u003cp\u003eJuniper SIRT is not aware of any malicious exploitation of this vulnerability.\u003c/p\u003e\", \"base64\": false}]}], \"timeline\": [{\"lang\": \"en\", \"time\": \"2024-01-10T17:00:00.000Z\", \"value\": \"Initial Publication\"}], \"solutions\": [{\"lang\": \"en\", \"value\": \"The following software releases have been updated to resolve this specific issue: Junos OS 20.4R3-S8, 21.1R3-S4, 21.2R3-S6, 21.3R3-S3, 21.4R3-S5, 22.1R2-S2, 22.1R3, 22.2R2-S1, 22.2R3, 22.3R1, and all subsequent releases.\\n\\n\", \"supportingMedia\": [{\"type\": \"text/html\", \"value\": \"\u003cp\u003eThe following software releases have been updated to resolve this specific issue: Junos OS 20.4R3-S8, 21.1R3-S4, 21.2R3-S6, 21.3R3-S3, 21.4R3-S5, 22.1R2-S2, 22.1R3, 22.2R2-S1, 22.2R3, 22.3R1, and all subsequent releases.\u003c/p\u003e\", \"base64\": false}]}], \"datePublic\": \"2024-01-10T17:00:00.000Z\", \"references\": [{\"url\": \"https://supportportal.juniper.net/JSA75741\", \"tags\": [\"vendor-advisory\"]}, {\"url\": \"https://www.first.org/cvss/calculator/4.0#CVSS:4.0/AV:A/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:L\", \"tags\": [\"technical-description\"]}], \"workarounds\": [{\"lang\": \"en\", \"value\": \"The issue can be prevented by configuring a limit for reject packets via:\\n\\n [ system ddos-protection protocols reject aggregate bandwidth 20 ] \\n\", \"supportingMedia\": [{\"type\": \"text/html\", \"value\": \"\u003cp\u003eThe issue can be prevented by configuring a limit for reject packets via:\u003c/p\u003e\u003ccode\u003e [ system ddos-protection protocols reject aggregate bandwidth 20 ] \u003c/code\u003e\u003cbr/\u003e\", \"base64\": false}]}], \"x_generator\": {\"engine\": \"Vulnogram 0.1.0-av217\"}, \"descriptions\": [{\"lang\": \"en\", \"value\": \"\\nAn Improper Neutralization of Equivalent Special Elements vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on PTX Series allows a unauthenticated, adjacent attacker to cause a Denial of Service (DoS).\\n\\nWhen MPLS packets are meant to be sent to a flexible tunnel interface (FTI) and if the FTI tunnel is down, these will hit the reject NH, due to which the packets get sent to the CPU and cause a host path wedge condition. This will cause the FPC to hang and requires a manual restart to recover.\\n\\nPlease note that this issue specifically affects PTX1000, PTX3000, PTX5000 with FPC3, PTX10002-60C, and PTX10008/16 with LC110x. Other PTX Series devices and Line Cards (LC) are not affected.\\n\\nThe following log message can be seen when the issue occurs:\\n\\nCmerror Op Set: Host Loopback: HOST LOOPBACK WEDGE DETECTED IN PATH ID \u003cid\u003e (URI: /fpc/\u003cfpc\u003e/pfe/\u003cpfe\u003e/cm/\u003ccm\u003e/Host_Loopback/\u003ccm\u003e/HOST_LOOPBACK_MAKE_CMERROR_ID[\u003cid\u003e])\\nThis issue affects Juniper Networks Junos OS:\\n\\n\\n\\n * All versions earlier than 20.4R3-S8;\\n * 21.1 versions earlier than 21.1R3-S4;\\n * 21.2 versions earlier than 21.2R3-S6;\\n * 21.3 versions earlier than 21.3R3-S3;\\n * 21.4 versions earlier than 21.4R3-S5;\\n * 22.1 versions earlier than 22.1R2-S2, 22.1R3;\\n * 22.2 versions earlier than 22.2R2-S1, 22.2R3.\\n\\n\\n\\n\\n\\n\\n\", \"supportingMedia\": [{\"type\": \"text/html\", \"value\": \"\\n\\n\u003cp\u003eAn Improper Neutralization of Equivalent Special Elements vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on PTX Series allows a unauthenticated, adjacent attacker to cause a Denial of Service (DoS).\u003c/p\u003e\u003cp\u003eWhen MPLS packets are meant to be sent to a flexible tunnel interface (FTI) and if the FTI tunnel is down, these will hit the reject NH, due to which the packets get sent to the CPU and cause a host path wedge condition. This will cause the FPC to hang and requires a manual restart to recover.\u003c/p\u003e\u003cp\u003ePlease note that this issue specifically affects PTX1000, PTX3000, PTX5000 with FPC3, PTX10002-60C, and PTX10008/16 with LC110x. Other PTX Series devices and Line Cards (LC) are not affected.\u003c/p\u003e\u003cp\u003eThe following log message can be seen when the issue occurs:\u003c/p\u003e\u003ccode\u003eCmerror Op Set: Host Loopback: HOST LOOPBACK WEDGE DETECTED IN PATH ID \u0026lt;id\u0026gt; (URI: /fpc/\u0026lt;fpc\u0026gt;/pfe/\u0026lt;pfe\u0026gt;/cm/\u0026lt;cm\u0026gt;/Host_Loopback/\u0026lt;cm\u0026gt;/HOST_LOOPBACK_MAKE_CMERROR_ID[\u0026lt;id\u0026gt;])\u003c/code\u003e\u003cbr\u003e\u003cp\u003eThis issue affects Juniper Networks Junos OS:\u003c/p\u003e\u003cp\u003e\u003c/p\u003e\u003cul\u003e\u003cli\u003eAll versions earlier than 20.4R3-S8;\u003c/li\u003e\u003cli\u003e21.1 versions earlier than 21.1R3-S4;\u003c/li\u003e\u003cli\u003e21.2 versions earlier than 21.2R3-S6;\u003c/li\u003e\u003cli\u003e21.3 versions earlier than 21.3R3-S3;\u003c/li\u003e\u003cli\u003e21.4 versions earlier than 21.4R3-S5;\u003c/li\u003e\u003cli\u003e22.1 versions earlier than 22.1R2-S2, 22.1R3;\u003c/li\u003e\u003cli\u003e22.2 versions earlier than 22.2R2-S1, 22.2R3.\u003c/li\u003e\u003c/ul\u003e\u003cp\u003e\u003c/p\u003e\\n\\n\", \"base64\": false}]}], \"problemTypes\": [{\"descriptions\": [{\"lang\": \"en\", \"type\": \"CWE\", \"cweId\": \"CWE-76\", \"description\": \"CWE-76 Improper Neutralization of Equivalent Special Elements\"}]}, {\"descriptions\": [{\"lang\": \"en\", \"description\": \"Denial of Service (DoS)\"}]}], \"configurations\": [{\"lang\": \"en\", \"value\": \"To be exposed to this issue FTI need to be configured:\\n\\n [ interfaces fti0 unit \u003cunit\u003e tunnel ... ]\\n\", \"supportingMedia\": [{\"type\": \"text/html\", \"value\": \"\u003cp\u003eTo be exposed to this issue FTI need to be configured:\u003c/p\u003e\u003ccode\u003e [ interfaces fti0 unit \u0026lt;unit\u0026gt; tunnel ... ]\u003c/code\u003e\u003cbr/\u003e\", \"base64\": false}]}], \"providerMetadata\": {\"orgId\": \"8cbe9d5a-a066-4c94-8978-4b15efeae968\", \"shortName\": \"juniper\", \"dateUpdated\": \"2024-01-12T00:53:38.834Z\"}}}",
"cveMetadata": "{\"cveId\": \"CVE-2024-21600\", \"state\": \"PUBLISHED\", \"dateUpdated\": \"2025-06-17T21:09:19.373Z\", \"dateReserved\": \"2023-12-27T19:38:25.706Z\", \"assignerOrgId\": \"8cbe9d5a-a066-4c94-8978-4b15efeae968\", \"datePublished\": \"2024-01-12T00:53:38.834Z\", \"assignerShortName\": \"juniper\"}",
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
}
}
Loading…
Loading…
Sightings
| Author | Source | Type | Date |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
- Confirmed: The vulnerability is confirmed from an analyst perspective.
- Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
- Patched: This vulnerability was successfully patched by the user reporting the sighting.
- Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
- Not confirmed: The user expresses doubt about the veracity of the vulnerability.
- Not patched: This vulnerability was not successfully patched by the user reporting the sighting.
Loading…
Loading…