CVE-2020-1600 (GCVE-0-2020-1600)
Vulnerability from cvelistv5
Published
2020-01-15 08:40
Modified
2024-09-17 02:26
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-400 - Uncontrolled Resource Consumption
Summary
In a Point-to-Multipoint (P2MP) Label Switched Path (LSP) scenario, an uncontrolled resource consumption vulnerability in the Routing Protocol Daemon (RPD) in Juniper Networks Junos OS allows a specific SNMP request to trigger an infinite loop causing a high CPU usage Denial of Service (DoS) condition. This issue affects both SNMP over IPv4 and IPv6. This issue affects: Juniper Networks Junos OS: 12.3X48 versions prior to 12.3X48-D90; 15.1 versions prior to 15.1R7-S6; 15.1X49 versions prior to 15.1X49-D200; 15.1X53 versions prior to 15.1X53-D238, 15.1X53-D592; 16.1 versions prior to 16.1R7-S5; 16.2 versions prior to 16.2R2-S11; 17.1 versions prior to 17.1R3-S1; 17.2 versions prior to 17.2R3-S2; 17.3 versions prior to 17.3R3-S7; 17.4 versions prior to 17.4R2-S4, 17.4R3; 18.1 versions prior to 18.1R3-S5; 18.2 versions prior to 18.2R3; 18.2X75 versions prior to 18.2X75-D50; 18.3 versions prior to 18.3R2; 18.4 versions prior to 18.4R2; 19.1 versions prior to 19.1R2.
References
| ► | URL | Tags | ||||||
|---|---|---|---|---|---|---|---|---|
|
||||||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Juniper Networks | Junos OS |
Version: 12.3X48 < 12.3X48-D90 Version: 15.1X53 < 15.1X53-D238, 15.1X53-D592 Version: 16.1 < 16.1R7-S5 Version: 16.2 < 16.2R2-S11 Version: 17.1 < 17.1R2-S11, 17.1R3-S1 Version: 17.2 < 17.2R3-S2 Version: 17.3 < 17.3R3-S7 Version: 17.4 < 17.4R2-S4, 17.4R3 Version: 18.1 < 18.1R3-S5 Version: 18.2 < 18.2R3 Version: 18.2X75 < 18.2X75-D50 Version: 18.3 < 18.3R2 Version: 18.4 < 18.4R2 Version: 19.1 < 19.1R2 Version: 19.2 < 19.2R1 Version: 15.1X49 < 15.1X49-D200 Version: 15.1 < 15.1R7-S6 |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2024-08-04T06:39:10.913Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"tags": [
"x_refsource_MISC",
"x_transferred"
],
"url": "https://prsearch.juniper.net/InfoCenter/index?page=prcontent\u0026id=PR1402185"
},
{
"tags": [
"x_refsource_CONFIRM",
"x_transferred"
],
"url": "https://kb.juniper.net/JSA10979"
}
],
"title": "CVE Program Container"
}
],
"cna": {
"affected": [
{
"product": "Junos OS",
"vendor": "Juniper Networks",
"versions": [
{
"lessThan": "12.3X48-D90",
"status": "affected",
"version": "12.3X48",
"versionType": "custom"
},
{
"lessThan": "15.1X53-D238, 15.1X53-D592",
"status": "affected",
"version": "15.1X53",
"versionType": "custom"
},
{
"lessThan": "16.1R7-S5",
"status": "affected",
"version": "16.1",
"versionType": "custom"
},
{
"lessThan": "16.2R2-S11",
"status": "affected",
"version": "16.2",
"versionType": "custom"
},
{
"lessThan": "17.1R2-S11, 17.1R3-S1",
"status": "affected",
"version": "17.1",
"versionType": "custom"
},
{
"lessThan": "17.2R3-S2",
"status": "affected",
"version": "17.2",
"versionType": "custom"
},
{
"lessThan": "17.3R3-S7",
"status": "affected",
"version": "17.3",
"versionType": "custom"
},
{
"lessThan": "17.4R2-S4, 17.4R3",
"status": "affected",
"version": "17.4",
"versionType": "custom"
},
{
"lessThan": "18.1R3-S5",
"status": "affected",
"version": "18.1",
"versionType": "custom"
},
{
"lessThan": "18.2R3",
"status": "affected",
"version": "18.2",
"versionType": "custom"
},
{
"lessThan": "18.2X75-D50",
"status": "affected",
"version": "18.2X75",
"versionType": "custom"
},
{
"lessThan": "18.3R2",
"status": "affected",
"version": "18.3",
"versionType": "custom"
},
{
"lessThan": "18.4R2",
"status": "affected",
"version": "18.4",
"versionType": "custom"
},
{
"lessThan": "19.1R2",
"status": "affected",
"version": "19.1",
"versionType": "custom"
},
{
"lessThan": "19.2R1",
"status": "affected",
"version": "19.2",
"versionType": "custom"
},
{
"lessThan": "15.1X49-D200",
"status": "affected",
"version": "15.1X49",
"versionType": "custom"
},
{
"lessThan": "15.1R7-S6",
"status": "affected",
"version": "15.1",
"versionType": "custom"
}
]
}
],
"configurations": [
{
"lang": "en",
"value": "The following minimal configuration is required. The community \"public\" is minimal; other communities are impacted as well.\n\n [snmp community public]\n [logical-systems logical-system-name protocols mpls label-switched-path lsp-name]\n [protocols mpls label-switched-path]"
}
],
"datePublic": "2020-01-08T00:00:00",
"descriptions": [
{
"lang": "en",
"value": "In a Point-to-Multipoint (P2MP) Label Switched Path (LSP) scenario, an uncontrolled resource consumption vulnerability in the Routing Protocol Daemon (RPD) in Juniper Networks Junos OS allows a specific SNMP request to trigger an infinite loop causing a high CPU usage Denial of Service (DoS) condition. This issue affects both SNMP over IPv4 and IPv6. This issue affects: Juniper Networks Junos OS: 12.3X48 versions prior to 12.3X48-D90; 15.1 versions prior to 15.1R7-S6; 15.1X49 versions prior to 15.1X49-D200; 15.1X53 versions prior to 15.1X53-D238, 15.1X53-D592; 16.1 versions prior to 16.1R7-S5; 16.2 versions prior to 16.2R2-S11; 17.1 versions prior to 17.1R3-S1; 17.2 versions prior to 17.2R3-S2; 17.3 versions prior to 17.3R3-S7; 17.4 versions prior to 17.4R2-S4, 17.4R3; 18.1 versions prior to 18.1R3-S5; 18.2 versions prior to 18.2R3; 18.2X75 versions prior to 18.2X75-D50; 18.3 versions prior to 18.3R2; 18.4 versions prior to 18.4R2; 19.1 versions prior to 19.1R2."
}
],
"exploits": [
{
"lang": "en",
"value": "Juniper SIRT is not aware of any malicious exploitation of this vulnerability."
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 6.5,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-400",
"description": "CWE-400 Uncontrolled Resource Consumption",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2020-01-15T08:40:33",
"orgId": "8cbe9d5a-a066-4c94-8978-4b15efeae968",
"shortName": "juniper"
},
"references": [
{
"tags": [
"x_refsource_MISC"
],
"url": "https://prsearch.juniper.net/InfoCenter/index?page=prcontent\u0026id=PR1402185"
},
{
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://kb.juniper.net/JSA10979"
}
],
"solutions": [
{
"lang": "en",
"value": "The following software releases have been updated to resolve this specific issue: 12.3X48-D90, 15.1X49-D200, 15.1R7-S6, 15.1X53-D238, 15.1X53-D592, 16.1R7-S5, 16.2R2-S11, 17.1R3-S1, 17.2R3-S2, 17.3R3-S7, 17.4R2-S4, 17.4R3, 18.1R3-S5, 18.2R3, 18.2X75-D50, 18.3R2, 18.4R2, 19.1R2, 19.2R1, and all subsequent releases."
}
],
"source": {
"advisory": "JSA10979",
"defect": [
"1402185"
],
"discovery": "USER"
},
"title": "Junos OS: A specific SNMP command can trigger a high CPU usage Denial of Service in the RPD daemon.",
"workarounds": [
{
"lang": "en",
"value": "If SNMP is not needed, remove SNMP from the system, otherwise, there are no available workarounds for this issue. SNMP is disabled by default.\n\nAdditional steps which may reduce the risk of exploitation include: \nUtilizing edge filtering with source-address validation (uRPF, etc.), access control lists (ACLs), and/or SNMPv3 authentication to limit access to the device only from trusted hosts."
}
],
"x_generator": {
"engine": "Vulnogram 0.0.9"
},
"x_legacyV4Record": {
"CVE_data_meta": {
"ASSIGNER": "sirt@juniper.net",
"DATE_PUBLIC": "2020-01-08T17:00:00.000Z",
"ID": "CVE-2020-1600",
"STATE": "PUBLIC",
"TITLE": "Junos OS: A specific SNMP command can trigger a high CPU usage Denial of Service in the RPD daemon."
},
"affects": {
"vendor": {
"vendor_data": [
{
"product": {
"product_data": [
{
"product_name": "Junos OS",
"version": {
"version_data": [
{
"version_affected": "\u003c",
"version_name": "12.3X48",
"version_value": "12.3X48-D90"
},
{
"version_affected": "\u003c",
"version_name": "15.1X53",
"version_value": "15.1X53-D238, 15.1X53-D592"
},
{
"version_affected": "\u003c",
"version_name": "16.1",
"version_value": "16.1R7-S5"
},
{
"version_affected": "\u003c",
"version_name": "16.2",
"version_value": "16.2R2-S11"
},
{
"version_affected": "\u003c",
"version_name": "17.1",
"version_value": "17.1R2-S11, 17.1R3-S1"
},
{
"version_affected": "\u003c",
"version_name": "17.2",
"version_value": "17.2R3-S2"
},
{
"version_affected": "\u003c",
"version_name": "17.3",
"version_value": "17.3R3-S7"
},
{
"version_affected": "\u003c",
"version_name": "17.4",
"version_value": "17.4R2-S4, 17.4R3"
},
{
"version_affected": "\u003c",
"version_name": "18.1",
"version_value": "18.1R3-S5"
},
{
"version_affected": "\u003c",
"version_name": "18.2",
"version_value": "18.2R3"
},
{
"version_affected": "\u003c",
"version_name": "18.2X75",
"version_value": "18.2X75-D50"
},
{
"version_affected": "\u003c",
"version_name": "18.3",
"version_value": "18.3R2"
},
{
"version_affected": "\u003c",
"version_name": "18.4",
"version_value": "18.4R2"
},
{
"version_affected": "\u003c",
"version_name": "19.1",
"version_value": "19.1R2"
},
{
"version_affected": "\u003c",
"version_name": "19.2",
"version_value": "19.2R1"
},
{
"version_affected": "\u003c",
"version_name": "15.1X49",
"version_value": "15.1X49-D200"
},
{
"version_affected": "\u003c",
"version_name": "15.1",
"version_value": "15.1R7-S6"
}
]
}
}
]
},
"vendor_name": "Juniper Networks"
}
]
}
},
"configuration": [
{
"lang": "en",
"value": "The following minimal configuration is required. The community \"public\" is minimal; other communities are impacted as well.\n\n [snmp community public]\n [logical-systems logical-system-name protocols mpls label-switched-path lsp-name]\n [protocols mpls label-switched-path]"
}
],
"data_format": "MITRE",
"data_type": "CVE",
"data_version": "4.0",
"description": {
"description_data": [
{
"lang": "eng",
"value": "In a Point-to-Multipoint (P2MP) Label Switched Path (LSP) scenario, an uncontrolled resource consumption vulnerability in the Routing Protocol Daemon (RPD) in Juniper Networks Junos OS allows a specific SNMP request to trigger an infinite loop causing a high CPU usage Denial of Service (DoS) condition. This issue affects both SNMP over IPv4 and IPv6. This issue affects: Juniper Networks Junos OS: 12.3X48 versions prior to 12.3X48-D90; 15.1 versions prior to 15.1R7-S6; 15.1X49 versions prior to 15.1X49-D200; 15.1X53 versions prior to 15.1X53-D238, 15.1X53-D592; 16.1 versions prior to 16.1R7-S5; 16.2 versions prior to 16.2R2-S11; 17.1 versions prior to 17.1R3-S1; 17.2 versions prior to 17.2R3-S2; 17.3 versions prior to 17.3R3-S7; 17.4 versions prior to 17.4R2-S4, 17.4R3; 18.1 versions prior to 18.1R3-S5; 18.2 versions prior to 18.2R3; 18.2X75 versions prior to 18.2X75-D50; 18.3 versions prior to 18.3R2; 18.4 versions prior to 18.4R2; 19.1 versions prior to 19.1R2."
}
]
},
"exploit": [
{
"lang": "en",
"value": "Juniper SIRT is not aware of any malicious exploitation of this vulnerability."
}
],
"generator": {
"engine": "Vulnogram 0.0.9"
},
"impact": {
"cvss": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 6.5,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "NONE",
"integrityImpact": "NONE",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
"version": "3.1"
}
},
"problemtype": {
"problemtype_data": [
{
"description": [
{
"lang": "eng",
"value": "CWE-400 Uncontrolled Resource Consumption"
}
]
}
]
},
"references": {
"reference_data": [
{
"name": "https://prsearch.juniper.net/InfoCenter/index?page=prcontent\u0026id=PR1402185",
"refsource": "MISC",
"url": "https://prsearch.juniper.net/InfoCenter/index?page=prcontent\u0026id=PR1402185"
},
{
"name": "https://kb.juniper.net/JSA10979",
"refsource": "CONFIRM",
"url": "https://kb.juniper.net/JSA10979"
}
]
},
"solution": [
{
"lang": "en",
"value": "The following software releases have been updated to resolve this specific issue: 12.3X48-D90, 15.1X49-D200, 15.1R7-S6, 15.1X53-D238, 15.1X53-D592, 16.1R7-S5, 16.2R2-S11, 17.1R3-S1, 17.2R3-S2, 17.3R3-S7, 17.4R2-S4, 17.4R3, 18.1R3-S5, 18.2R3, 18.2X75-D50, 18.3R2, 18.4R2, 19.1R2, 19.2R1, and all subsequent releases."
}
],
"source": {
"advisory": "JSA10979",
"defect": [
"1402185"
],
"discovery": "USER"
},
"work_around": [
{
"lang": "en",
"value": "If SNMP is not needed, remove SNMP from the system, otherwise, there are no available workarounds for this issue. SNMP is disabled by default.\n\nAdditional steps which may reduce the risk of exploitation include: \nUtilizing edge filtering with source-address validation (uRPF, etc.), access control lists (ACLs), and/or SNMPv3 authentication to limit access to the device only from trusted hosts."
}
]
}
}
},
"cveMetadata": {
"assignerOrgId": "8cbe9d5a-a066-4c94-8978-4b15efeae968",
"assignerShortName": "juniper",
"cveId": "CVE-2020-1600",
"datePublished": "2020-01-15T08:40:33.912746Z",
"dateReserved": "2019-11-04T00:00:00",
"dateUpdated": "2024-09-17T02:26:34.432Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.1"
}
Loading…
Loading…
Sightings
| Author | Source | Type | Date |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
- Confirmed: The vulnerability is confirmed from an analyst perspective.
- Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
- Patched: This vulnerability was successfully patched by the user reporting the sighting.
- Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
- Not confirmed: The user expresses doubt about the veracity of the vulnerability.
- Not patched: This vulnerability was not successfully patched by the user reporting the sighting.
Loading…
Loading…