CVE-2026-63960 (GCVE-0-2026-63960)

Vulnerability from cvelistv5 – Published: 2026-07-19 14:55 – Updated: 2026-07-20 06:41
VLAI
Title
usb: typec: wcove: don't write past struct pd_message in wcove_read_rx_buffer()
Summary
In the Linux kernel, the following vulnerability has been resolved: usb: typec: wcove: don't write past struct pd_message in wcove_read_rx_buffer() wcove_read_rx_buffer() copies the PD RX FIFO into the caller's struct pd_message with for (i = 0; i < USBC_RXINFO_RXBYTES(info); i++) regmap_read(wcove->regmap, USBC_RX_DATA + i, msg + i); which has two problems: USBC_RXINFO_RXBYTES() is a 5-bit field (max 31) while struct pd_message is 30 bytes (__le16 header + __le32 payload[PD_MAX_PAYLOAD], packed). The byte count latched in RXINFO is the number of bytes the port partner put on the wire, so a malicious partner that transmits a 31-byte frame can drive the loop one byte past the destination if the WCOVE BMC receiver does not enforce the PD object-count limit in hardware. The existing FIXME flagged this as unverified. Independently, regmap_read() takes an unsigned int * and stores a full unsigned int at the destination. Passing the byte pointer msg + i means each iteration writes four bytes; the high three are zero (val_bits is 8) and are normally overwritten by the next iteration, but the final iteration's high bytes are not. With RXBYTES == 30 the i == 29 iteration already writes three zero bytes past msg, which sits on the IRQ thread's stack in wcove_typec_irq(). Clamp the loop to sizeof(struct pd_message) and read each register into a local before storing only its low byte, so the copy can never exceed the destination regardless of what RXINFO reports.
Severity
No CVSS data available.
Assigner
Linux CNA
Impacted products
Vendor Product Version
Linux Linux Affected: 3c4fb9f169214290ec9a943907321e6265b36f65 , < 3e632098d0521257ea965bbd6fde807d9bee5c8a (git)
Affected: 3c4fb9f169214290ec9a943907321e6265b36f65 , < f2a1edc0bd142edabc6c85d88713f2bc178dd317 (git)
Affected: 3c4fb9f169214290ec9a943907321e6265b36f65 , < 6899f5b6d7b83ce79a3d331dc61dd31bf73f9c22 (git)
Affected: 3c4fb9f169214290ec9a943907321e6265b36f65 , < 5cd0e7ac4eefbdb330f8c72694fe74e63df65552 (git)
Affected: 3c4fb9f169214290ec9a943907321e6265b36f65 , < d0e4b8b3c6b7607a16932556eaaca5d5cf69f192 (git)
Affected: 3c4fb9f169214290ec9a943907321e6265b36f65 , < e94933dc41b87503bf585c8c6d53d740620eceb9 (git)
Affected: 3c4fb9f169214290ec9a943907321e6265b36f65 , < 3f9d50c8b02b4af0646aa892465080f9061fc89c (git)
Affected: 3c4fb9f169214290ec9a943907321e6265b36f65 , < 4af7ad0e6d7aa4403dbb1dac7b9659b0421efcaa (git)
Create a notification for this product.
Linux Linux Affected: 4.15
Unaffected: 0 , < 4.15 (semver)
Unaffected: 5.10.259 , ≤ 5.10.* (semver)
Unaffected: 5.15.210 , ≤ 5.15.* (semver)
Unaffected: 6.1.176 , ≤ 6.1.* (semver)
Unaffected: 6.6.143 , ≤ 6.6.* (semver)
Unaffected: 6.12.93 , ≤ 6.12.* (semver)
Unaffected: 6.18.35 , ≤ 6.18.* (semver)
Unaffected: 7.0.12 , ≤ 7.0.* (semver)
Unaffected: 7.1 , ≤ * (original_commit_for_fix)
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/usb/typec/tcpm/wcove.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "3e632098d0521257ea965bbd6fde807d9bee5c8a",
              "status": "affected",
              "version": "3c4fb9f169214290ec9a943907321e6265b36f65",
              "versionType": "git"
            },
            {
              "lessThan": "f2a1edc0bd142edabc6c85d88713f2bc178dd317",
              "status": "affected",
              "version": "3c4fb9f169214290ec9a943907321e6265b36f65",
              "versionType": "git"
            },
            {
              "lessThan": "6899f5b6d7b83ce79a3d331dc61dd31bf73f9c22",
              "status": "affected",
              "version": "3c4fb9f169214290ec9a943907321e6265b36f65",
              "versionType": "git"
            },
            {
              "lessThan": "5cd0e7ac4eefbdb330f8c72694fe74e63df65552",
              "status": "affected",
              "version": "3c4fb9f169214290ec9a943907321e6265b36f65",
              "versionType": "git"
            },
            {
              "lessThan": "d0e4b8b3c6b7607a16932556eaaca5d5cf69f192",
              "status": "affected",
              "version": "3c4fb9f169214290ec9a943907321e6265b36f65",
              "versionType": "git"
            },
            {
              "lessThan": "e94933dc41b87503bf585c8c6d53d740620eceb9",
              "status": "affected",
              "version": "3c4fb9f169214290ec9a943907321e6265b36f65",
              "versionType": "git"
            },
            {
              "lessThan": "3f9d50c8b02b4af0646aa892465080f9061fc89c",
              "status": "affected",
              "version": "3c4fb9f169214290ec9a943907321e6265b36f65",
              "versionType": "git"
            },
            {
              "lessThan": "4af7ad0e6d7aa4403dbb1dac7b9659b0421efcaa",
              "status": "affected",
              "version": "3c4fb9f169214290ec9a943907321e6265b36f65",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/usb/typec/tcpm/wcove.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "4.15"
            },
            {
              "lessThan": "4.15",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.10.*",
              "status": "unaffected",
              "version": "5.10.259",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.15.*",
              "status": "unaffected",
              "version": "5.15.210",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.1.*",
              "status": "unaffected",
              "version": "6.1.176",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.6.*",
              "status": "unaffected",
              "version": "6.6.143",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.93",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.35",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "7.0.*",
              "status": "unaffected",
              "version": "7.0.12",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.1",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.10.259",
                  "versionStartIncluding": "4.15",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.15.210",
                  "versionStartIncluding": "4.15",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.1.176",
                  "versionStartIncluding": "4.15",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.6.143",
                  "versionStartIncluding": "4.15",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.12.93",
                  "versionStartIncluding": "4.15",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.18.35",
                  "versionStartIncluding": "4.15",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.0.12",
                  "versionStartIncluding": "4.15",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.1",
                  "versionStartIncluding": "4.15",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nusb: typec: wcove: don\u0027t write past struct pd_message in wcove_read_rx_buffer()\n\nwcove_read_rx_buffer() copies the PD RX FIFO into the caller\u0027s\nstruct pd_message with\n\n\tfor (i = 0; i \u003c USBC_RXINFO_RXBYTES(info); i++)\n\t\tregmap_read(wcove-\u003eregmap, USBC_RX_DATA + i, msg + i);\n\nwhich has two problems:\n\nUSBC_RXINFO_RXBYTES() is a 5-bit field (max 31) while struct pd_message\nis 30 bytes (__le16 header + __le32 payload[PD_MAX_PAYLOAD], packed).\nThe byte count latched in RXINFO is the number of bytes the port partner\nput on the wire, so a malicious partner that transmits a 31-byte frame\ncan drive the loop one byte past the destination if the WCOVE BMC\nreceiver does not enforce the PD object-count limit in hardware. The\nexisting FIXME flagged this as unverified.\n\nIndependently, regmap_read() takes an unsigned int * and stores a full\nunsigned int at the destination. Passing the byte pointer msg + i means\neach iteration writes four bytes; the high three are zero (val_bits is\n8) and are normally overwritten by the next iteration, but the final\niteration\u0027s high bytes are not. With RXBYTES == 30 the i == 29 iteration\nalready writes three zero bytes past msg, which sits on the IRQ thread\u0027s\nstack in wcove_typec_irq().\n\nClamp the loop to sizeof(struct pd_message) and read each register into\na local before storing only its low byte, so the copy can never exceed\nthe destination regardless of what RXINFO reports."
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-07-20T06:41:40.389Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/3e632098d0521257ea965bbd6fde807d9bee5c8a"
        },
        {
          "url": "https://git.kernel.org/stable/c/f2a1edc0bd142edabc6c85d88713f2bc178dd317"
        },
        {
          "url": "https://git.kernel.org/stable/c/6899f5b6d7b83ce79a3d331dc61dd31bf73f9c22"
        },
        {
          "url": "https://git.kernel.org/stable/c/5cd0e7ac4eefbdb330f8c72694fe74e63df65552"
        },
        {
          "url": "https://git.kernel.org/stable/c/d0e4b8b3c6b7607a16932556eaaca5d5cf69f192"
        },
        {
          "url": "https://git.kernel.org/stable/c/e94933dc41b87503bf585c8c6d53d740620eceb9"
        },
        {
          "url": "https://git.kernel.org/stable/c/3f9d50c8b02b4af0646aa892465080f9061fc89c"
        },
        {
          "url": "https://git.kernel.org/stable/c/4af7ad0e6d7aa4403dbb1dac7b9659b0421efcaa"
        }
      ],
      "title": "usb: typec: wcove: don\u0027t write past struct pd_message in wcove_read_rx_buffer()",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2026-63960",
    "datePublished": "2026-07-19T14:55:50.282Z",
    "dateReserved": "2026-07-19T07:54:57.023Z",
    "dateUpdated": "2026-07-20T06:41:40.389Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-63960",
      "date": "2026-11-19",
      "epss": "0.00156",
      "percentile": "0.04802"
    },
    "microsoft_vex": {
      "current_release_date": "2026-07-21T01:03:29.000Z",
      "cve": "CVE-2026-63960",
      "id": "msrc_CVE-2026-63960",
      "initial_release_date": "2026-07-21T01:03:29.000Z",
      "product_status:known_affected": "1",
      "source": "Microsoft CSAF VEX",
      "status": "final",
      "title": "usb: typec: wcove: don\u0027t write past struct pd_message in wcove_read_rx_buffer()",
      "url": "https://msrc.microsoft.com/csaf/vex/2026/msrc_cve-2026-63960.json",
      "version": "1"
    },
    "redhat_vex": {
      "aggregate_severity": "None",
      "current_release_date": "2026-11-07T10:49:24+00:00",
      "cve": "CVE-2026-63960",
      "id": "CVE-2026-63960",
      "initial_release_date": "2026-07-19T00:00:00+00:00",
      "product_status:known_not_affected": "200",
      "source": "Red Hat CSAF VEX",
      "status": "final",
      "title": "kernel: usb: typec: wcove: don\u0027t write past struct pd_message in wcove_read_rx_buffer()",
      "url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-63960.json",
      "version": "3"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.