CVE-2026-31712 (GCVE-0-2026-31712)

Vulnerability from cvelistv5 – Published: 2026-05-01 13:56 – Updated: 2026-10-15 01:18
VLAI
Title
ksmbd: require minimum ACE size in smb_check_perm_dacl()
Summary
In the Linux kernel, the following vulnerability has been resolved: ksmbd: require minimum ACE size in smb_check_perm_dacl() Both ACE-walk loops in smb_check_perm_dacl() only guard against an under-sized remaining buffer, not against an ACE whose declared `ace->size` is smaller than the struct it claims to describe: if (offsetof(struct smb_ace, access_req) > aces_size) break; ace_size = le16_to_cpu(ace->size); if (ace_size > aces_size) break; The first check only requires the 4-byte ACE header to be in bounds; it does not require access_req (4 bytes at offset 4) to be readable. An attacker who has set a crafted DACL on a file they own can declare ace->size == 4 with aces_size == 4, pass both checks, and then granted |= le32_to_cpu(ace->access_req); /* upper loop */ compare_sids(&sid, &ace->sid); /* lower loop */ reads access_req at offset 4 (OOB by up to 4 bytes) and ace->sid at offset 8 (OOB by up to CIFS_SID_BASE_SIZE + SID_MAX_SUB_AUTHORITIES * 4 bytes). Tighten both loops to require ace_size >= offsetof(struct smb_ace, sid) + CIFS_SID_BASE_SIZE which is the smallest valid on-wire ACE layout (4-byte header + 4-byte access_req + 8-byte sid base with zero sub-auths). Also reject ACEs whose sid.num_subauth exceeds SID_MAX_SUB_AUTHORITIES before letting compare_sids() dereference sub_auth[] entries. parse_sec_desc() already enforces an equivalent check (lines 441-448); smb_check_perm_dacl() simply grew weaker validation over time. Reachability: authenticated SMB client with permission to set an ACL on a file. On a subsequent CREATE against that file, the kernel walks the stored DACL via smb_check_perm_dacl() and triggers the OOB read. Not pre-auth, and the OOB read is not reflected to the attacker, but KASAN reports and kernel state corruption are possible.
Assigner
Linux CNA
Impacted products
Vendor Product Version
Linux Linux Affected: e2f34481b24db2fd634b5edb0a5bd0e4d38cc6e9 , < 282cbbb476b9f35793452bc461934af4c7eca169 (git)
Affected: e2f34481b24db2fd634b5edb0a5bd0e4d38cc6e9 , < f20adc4ef7428bc485ee83fd1a592252fb87718b (git)
Affected: e2f34481b24db2fd634b5edb0a5bd0e4d38cc6e9 , < 325d4ac11f526cb8964cff14548ccf02d8c756d8 (git)
Affected: e2f34481b24db2fd634b5edb0a5bd0e4d38cc6e9 , < 95e5aa3c3261da8c95b27d7aecf8ee39b9f86a4c (git)
Affected: e2f34481b24db2fd634b5edb0a5bd0e4d38cc6e9 , < 90089584b2e25c4510b7b987387b4405f0673ece (git)
Affected: e2f34481b24db2fd634b5edb0a5bd0e4d38cc6e9 , < 151b1799861fde38087c08f613abc2843ef597b0 (git)
Affected: e2f34481b24db2fd634b5edb0a5bd0e4d38cc6e9 , < d07b26f39246a82399661936dd0c853983cfade7 (git)
Create a notification for this product.
Linux Linux Affected: 5.15
Unaffected: 0 , < 5.15 (semver)
Unaffected: 5.15.210 , ≤ 5.15.* (semver)
Unaffected: 6.1.176 , ≤ 6.1.* (semver)
Unaffected: 6.6.140 , ≤ 6.6.* (semver)
Unaffected: 6.12.84 , ≤ 6.12.* (semver)
Unaffected: 6.18.25 , ≤ 6.18.* (semver)
Unaffected: 7.0.2 , ≤ 7.0.* (semver)
Unaffected: 7.1 , ≤ * (original_commit_for_fix)
Create a notification for this product.
Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem Affected: 0 , < * (custom)
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "affected": [
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "0",
                "versionType": "custom"
              }
            ]
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-10-15T01:18:08.369Z",
          "orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
          "shortName": "siemens-SADP"
        },
        "references": [
          {
            "url": "https://cert-portal.siemens.com/productcert/html/ssa-784472.html"
          }
        ],
        "x_adpType": "supplier"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "fs/smb/server/smbacl.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "282cbbb476b9f35793452bc461934af4c7eca169",
              "status": "affected",
              "version": "e2f34481b24db2fd634b5edb0a5bd0e4d38cc6e9",
              "versionType": "git"
            },
            {
              "lessThan": "f20adc4ef7428bc485ee83fd1a592252fb87718b",
              "status": "affected",
              "version": "e2f34481b24db2fd634b5edb0a5bd0e4d38cc6e9",
              "versionType": "git"
            },
            {
              "lessThan": "325d4ac11f526cb8964cff14548ccf02d8c756d8",
              "status": "affected",
              "version": "e2f34481b24db2fd634b5edb0a5bd0e4d38cc6e9",
              "versionType": "git"
            },
            {
              "lessThan": "95e5aa3c3261da8c95b27d7aecf8ee39b9f86a4c",
              "status": "affected",
              "version": "e2f34481b24db2fd634b5edb0a5bd0e4d38cc6e9",
              "versionType": "git"
            },
            {
              "lessThan": "90089584b2e25c4510b7b987387b4405f0673ece",
              "status": "affected",
              "version": "e2f34481b24db2fd634b5edb0a5bd0e4d38cc6e9",
              "versionType": "git"
            },
            {
              "lessThan": "151b1799861fde38087c08f613abc2843ef597b0",
              "status": "affected",
              "version": "e2f34481b24db2fd634b5edb0a5bd0e4d38cc6e9",
              "versionType": "git"
            },
            {
              "lessThan": "d07b26f39246a82399661936dd0c853983cfade7",
              "status": "affected",
              "version": "e2f34481b24db2fd634b5edb0a5bd0e4d38cc6e9",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "fs/smb/server/smbacl.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "5.15"
            },
            {
              "lessThan": "5.15",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.15.*",
              "status": "unaffected",
              "version": "5.15.210",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.1.*",
              "status": "unaffected",
              "version": "6.1.176",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.6.*",
              "status": "unaffected",
              "version": "6.6.140",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.84",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.25",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "7.0.*",
              "status": "unaffected",
              "version": "7.0.2",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.1",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.15.210",
                  "versionStartIncluding": "5.15",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.1.176",
                  "versionStartIncluding": "5.15",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.6.140",
                  "versionStartIncluding": "5.15",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.12.84",
                  "versionStartIncluding": "5.15",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.18.25",
                  "versionStartIncluding": "5.15",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.0.2",
                  "versionStartIncluding": "5.15",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.1",
                  "versionStartIncluding": "5.15",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nksmbd: require minimum ACE size in smb_check_perm_dacl()\n\nBoth ACE-walk loops in smb_check_perm_dacl() only guard against an\nunder-sized remaining buffer, not against an ACE whose declared\n`ace-\u003esize` is smaller than the struct it claims to describe:\n\n  if (offsetof(struct smb_ace, access_req) \u003e aces_size)\n      break;\n  ace_size = le16_to_cpu(ace-\u003esize);\n  if (ace_size \u003e aces_size)\n      break;\n\nThe first check only requires the 4-byte ACE header to be in bounds;\nit does not require access_req (4 bytes at offset 4) to be readable.\nAn attacker who has set a crafted DACL on a file they own can declare\nace-\u003esize == 4 with aces_size == 4, pass both checks, and then\n\n  granted |= le32_to_cpu(ace-\u003eaccess_req);               /* upper loop */\n  compare_sids(\u0026sid, \u0026ace-\u003esid);                         /* lower loop */\n\nreads access_req at offset 4 (OOB by up to 4 bytes) and ace-\u003esid at\noffset 8 (OOB by up to CIFS_SID_BASE_SIZE + SID_MAX_SUB_AUTHORITIES\n* 4 bytes).\n\nTighten both loops to require\n\n  ace_size \u003e= offsetof(struct smb_ace, sid) + CIFS_SID_BASE_SIZE\n\nwhich is the smallest valid on-wire ACE layout (4-byte header +\n4-byte access_req + 8-byte sid base with zero sub-auths).  Also\nreject ACEs whose sid.num_subauth exceeds SID_MAX_SUB_AUTHORITIES\nbefore letting compare_sids() dereference sub_auth[] entries.\n\nparse_sec_desc() already enforces an equivalent check (lines 441-448);\nsmb_check_perm_dacl() simply grew weaker validation over time.\n\nReachability: authenticated SMB client with permission to set an ACL\non a file.  On a subsequent CREATE against that file, the kernel\nwalks the stored DACL via smb_check_perm_dacl() and triggers the\nOOB read.  Not pre-auth, and the OOB read is not reflected to the\nattacker, but KASAN reports and kernel state corruption are\npossible."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "baseScore": 8.3,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:L/A:H",
            "version": "3.1"
          },
          "scenarios": [
            {
              "lang": "en",
              "value": "AV:N - ksmbd is an in-kernel SMB server reachable over the network via SMB2/SMB3 requests, typically TCP/445. The vulnerable DACL walk is reached from remote SMB CREATE processing after a crafted stored ACL is present.\nAC:L - No race or uncontrollable timing is required; an attacker can set a malformed DACL and then trigger a subsequent CREATE against that file. ACL xattr support is a reasonable ksmbd deployment configuration, not an exploit-complexity barrier.\nPR:L - The path is not pre-authentication: SMB2 commands require a valid authenticated session and tree connect. The attacker needs ordinary SMB credentials with permission to set an ACL on a file they control, not kernel/root privileges.\nUI:N - After authentication, the attacker can send the ACL-setting and CREATE requests directly. No victim user action is required.\nS:U - The impact remains within the kernel/ksmbd host security authority. There is no VM, IOMMU, or sandbox boundary crossing.\nC:H - The bug causes attacker-triggered out-of-bounds reads from kernel heap data beyond the stored security descriptor, including SID fields. Although not directly reflected, this is more than a strictly bounded few-byte read and the higher-severity rule makes High appropriate.\nI:L - The out-of-bounds data is consumed as permission-check state such as ACE access bits, so it can corrupt ksmbd access-control decisions for the requested object. There is no clear arbitrary kernel write or control-flow hijack primitive, so the integrity impact is limited rather than High.\nA:H - The malformed ACE can reliably trigger kernel out-of-bounds reads during SMB CREATE, producing KASAN reports and possible kernel oops/panic depending on configuration. A remote authenticated user can repeat the trigger for denial of service."
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-08-05T12:24:46.463Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/282cbbb476b9f35793452bc461934af4c7eca169"
        },
        {
          "url": "https://git.kernel.org/stable/c/f20adc4ef7428bc485ee83fd1a592252fb87718b"
        },
        {
          "url": "https://git.kernel.org/stable/c/325d4ac11f526cb8964cff14548ccf02d8c756d8"
        },
        {
          "url": "https://git.kernel.org/stable/c/95e5aa3c3261da8c95b27d7aecf8ee39b9f86a4c"
        },
        {
          "url": "https://git.kernel.org/stable/c/90089584b2e25c4510b7b987387b4405f0673ece"
        },
        {
          "url": "https://git.kernel.org/stable/c/151b1799861fde38087c08f613abc2843ef597b0"
        },
        {
          "url": "https://git.kernel.org/stable/c/d07b26f39246a82399661936dd0c853983cfade7"
        }
      ],
      "title": "ksmbd: require minimum ACE size in smb_check_perm_dacl()",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2026-31712",
    "datePublished": "2026-05-01T13:56:08.583Z",
    "dateReserved": "2026-03-09T15:48:24.133Z",
    "dateUpdated": "2026-10-15T01:18:08.369Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-31712",
      "date": "2026-11-19",
      "epss": "0.00323",
      "percentile": "0.25849"
    },
    "microsoft_vex": {
      "current_release_date": "2026-05-22T01:43:46.000Z",
      "cve": "CVE-2026-31712",
      "id": "msrc_CVE-2026-31712",
      "initial_release_date": "2026-05-02T01:03:15.000Z",
      "product_status:known_affected": "3",
      "product_status:known_not_affected": "1",
      "source": "Microsoft CSAF VEX",
      "status": "final",
      "title": "ksmbd: require minimum ACE size in smb_check_perm_dacl()",
      "url": "https://msrc.microsoft.com/csaf/vex/2026/msrc_cve-2026-31712.json",
      "version": "6"
    },
    "redhat_vex": {
      "aggregate_severity": "Low",
      "current_release_date": "2026-11-07T04:37:29+00:00",
      "cve": "CVE-2026-31712",
      "id": "CVE-2026-31712",
      "initial_release_date": "2026-05-01T00:00:00+00:00",
      "product_status:known_not_affected": "200",
      "source": "Red Hat CSAF VEX",
      "status": "final",
      "title": "kernel: ksmbd: require minimum ACE size in smb_check_perm_dacl()",
      "url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-31712.json",
      "version": "3"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.