CVE-2025-68746 (GCVE-0-2025-68746)

Vulnerability from cvelistv5 – Published: 2025-12-24 12:09 – Updated: 2026-10-16 15:09
VLAI
Title
spi: tegra210-quad: Fix timeout handling
Summary
In the Linux kernel, the following vulnerability has been resolved: spi: tegra210-quad: Fix timeout handling When the CPU that the QSPI interrupt handler runs on (typically CPU 0) is excessively busy, it can lead to rare cases of the IRQ thread not running before the transfer timeout is reached. While handling the timeouts, any pending transfers are cleaned up and the message that they correspond to is marked as failed, which leaves the curr_xfer field pointing at stale memory. To avoid this, clear curr_xfer to NULL upon timeout and check for this condition when the IRQ thread is finally run. While at it, also make sure to clear interrupts on failure so that new interrupts can be run. A better, more involved, fix would move the interrupt clearing into a hard IRQ handler. Ideally we would also want to signal that the IRQ thread no longer needs to be run after the timeout is hit to avoid the extra check for a valid transfer.
SSVC
Exploitation: none Automatable: no Technical Impact: total
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-10-16 15:05 UTC
Assigner
Linux CNA
Impacted products
Vendor Product Version
Linux Linux Affected: 921fc1838fb036f690b8ba52e6a6d3644b475cbb , < 88db8bb7ed1bb474618acdf05ebd4f0758d244e2 (git)
Affected: 921fc1838fb036f690b8ba52e6a6d3644b475cbb , < 83309dd551cfd60a5a1a98d9cab19f435b44d46d (git)
Affected: 921fc1838fb036f690b8ba52e6a6d3644b475cbb , < c934e40246da2c5726d14e94719c514e30840df8 (git)
Affected: 921fc1838fb036f690b8ba52e6a6d3644b475cbb , < 551060efb156c50fe33799038ba8145418cfdeef (git)
Affected: 921fc1838fb036f690b8ba52e6a6d3644b475cbb , < bb0c58be84f907285af45657c1d4847b960a12bf (git)
Affected: 921fc1838fb036f690b8ba52e6a6d3644b475cbb , < 01bbf25c767219b14c3235bfa85906b8d2cb8fbc (git)
Affected: 921fc1838fb036f690b8ba52e6a6d3644b475cbb , < b4e002d8a7cee3b1d70efad0e222567f92a73000 (git)
Create a notification for this product.
Linux Linux Affected: 5.12
Unaffected: 0 , < 5.12 (semver)
Unaffected: 5.15.198 , ≤ 5.15.* (semver)
Unaffected: 6.1.160 , ≤ 6.1.* (semver)
Unaffected: 6.6.120 , ≤ 6.6.* (semver)
Unaffected: 6.12.63 , ≤ 6.12.* (semver)
Unaffected: 6.17.13 , ≤ 6.17.* (semver)
Unaffected: 6.18.2 , ≤ 6.18.* (semver)
Unaffected: 6.19 , ≤ * (original_commit_for_fix)
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2025-68746",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "total"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-10-16T15:05:04.392676Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-10-16T15:09:44.157Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/spi/spi-tegra210-quad.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "88db8bb7ed1bb474618acdf05ebd4f0758d244e2",
              "status": "affected",
              "version": "921fc1838fb036f690b8ba52e6a6d3644b475cbb",
              "versionType": "git"
            },
            {
              "lessThan": "83309dd551cfd60a5a1a98d9cab19f435b44d46d",
              "status": "affected",
              "version": "921fc1838fb036f690b8ba52e6a6d3644b475cbb",
              "versionType": "git"
            },
            {
              "lessThan": "c934e40246da2c5726d14e94719c514e30840df8",
              "status": "affected",
              "version": "921fc1838fb036f690b8ba52e6a6d3644b475cbb",
              "versionType": "git"
            },
            {
              "lessThan": "551060efb156c50fe33799038ba8145418cfdeef",
              "status": "affected",
              "version": "921fc1838fb036f690b8ba52e6a6d3644b475cbb",
              "versionType": "git"
            },
            {
              "lessThan": "bb0c58be84f907285af45657c1d4847b960a12bf",
              "status": "affected",
              "version": "921fc1838fb036f690b8ba52e6a6d3644b475cbb",
              "versionType": "git"
            },
            {
              "lessThan": "01bbf25c767219b14c3235bfa85906b8d2cb8fbc",
              "status": "affected",
              "version": "921fc1838fb036f690b8ba52e6a6d3644b475cbb",
              "versionType": "git"
            },
            {
              "lessThan": "b4e002d8a7cee3b1d70efad0e222567f92a73000",
              "status": "affected",
              "version": "921fc1838fb036f690b8ba52e6a6d3644b475cbb",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/spi/spi-tegra210-quad.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "5.12"
            },
            {
              "lessThan": "5.12",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.15.*",
              "status": "unaffected",
              "version": "5.15.198",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.1.*",
              "status": "unaffected",
              "version": "6.1.160",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.6.*",
              "status": "unaffected",
              "version": "6.6.120",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.63",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.17.*",
              "status": "unaffected",
              "version": "6.17.13",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.2",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "6.19",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.15.198",
                  "versionStartIncluding": "5.12",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.1.160",
                  "versionStartIncluding": "5.12",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.6.120",
                  "versionStartIncluding": "5.12",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.12.63",
                  "versionStartIncluding": "5.12",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.17.13",
                  "versionStartIncluding": "5.12",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.18.2",
                  "versionStartIncluding": "5.12",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.19",
                  "versionStartIncluding": "5.12",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nspi: tegra210-quad: Fix timeout handling\n\nWhen the CPU that the QSPI interrupt handler runs on (typically CPU 0)\nis excessively busy, it can lead to rare cases of the IRQ thread not\nrunning before the transfer timeout is reached.\n\nWhile handling the timeouts, any pending transfers are cleaned up and\nthe message that they correspond to is marked as failed, which leaves\nthe curr_xfer field pointing at stale memory.\n\nTo avoid this, clear curr_xfer to NULL upon timeout and check for this\ncondition when the IRQ thread is finally run.\n\nWhile at it, also make sure to clear interrupts on failure so that new\ninterrupts can be run.\n\nA better, more involved, fix would move the interrupt clearing into a\nhard IRQ handler. Ideally we would also want to signal that the IRQ\nthread no longer needs to be run after the timeout is hit to avoid the\nextra check for a valid transfer."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "scenarios": [
            {
              "lang": "en",
              "value": "AV:L - A local process can reach the vulnerable controller through SPI/MTD device I/O or flash-backed filesystem access; the controller is not inherently network-facing.\nAC:L - The attacker can repeatedly initiate transfers while generating CPU or interrupt contention to delay the threaded IRQ beyond the fixed timeout. The race is therefore attacker-influenceable and repeatable.\nPR:L - An ordinary user with access to an exposed spidev/MTD node or mounted SPI-NOR storage can initiate transfers, and the relevant read and SPI ioctl paths impose no capability check.\nUI:N - Exploitation requires no action by another user after the attacker initiates the transfer and scheduling race.\nS:U - The stale-pointer corruption occurs within the host kernel and does not inherently cross a VM, IOMMU, or other security authority boundary.\nC:H - The stale spi_transfer exposes freed buffer pointers and DMA addresses, providing potentially attacker-shaped kernel-memory reads and information disclosure.\nI:H - The PIO and DMA receive paths write through stale buffer pointers and can remap reclaimed transfer fields, making arbitrary kernel-memory corruption and control-flow hijacking defensible.\nA:H - Dereferencing stale transfer or buffer memory can cause a kernel fault, panic, or controller failure, and the condition can be triggered repeatedly."
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-08-05T12:11:15.698Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/88db8bb7ed1bb474618acdf05ebd4f0758d244e2"
        },
        {
          "url": "https://git.kernel.org/stable/c/83309dd551cfd60a5a1a98d9cab19f435b44d46d"
        },
        {
          "url": "https://git.kernel.org/stable/c/c934e40246da2c5726d14e94719c514e30840df8"
        },
        {
          "url": "https://git.kernel.org/stable/c/551060efb156c50fe33799038ba8145418cfdeef"
        },
        {
          "url": "https://git.kernel.org/stable/c/bb0c58be84f907285af45657c1d4847b960a12bf"
        },
        {
          "url": "https://git.kernel.org/stable/c/01bbf25c767219b14c3235bfa85906b8d2cb8fbc"
        },
        {
          "url": "https://git.kernel.org/stable/c/b4e002d8a7cee3b1d70efad0e222567f92a73000"
        }
      ],
      "title": "spi: tegra210-quad: Fix timeout handling",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2025-68746",
    "datePublished": "2025-12-24T12:09:42.213Z",
    "dateReserved": "2025-12-24T10:30:51.031Z",
    "dateUpdated": "2026-10-16T15:09:44.157Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2025-68746",
      "date": "2026-11-19",
      "epss": "0.00144",
      "percentile": "0.03784"
    },
    "microsoft_vex": {
      "current_release_date": "2026-02-18T02:29:02.000Z",
      "cve": "CVE-2025-68746",
      "id": "msrc_CVE-2025-68746",
      "initial_release_date": "2025-12-25T01:04:11.000Z",
      "product_status:fixed": "1",
      "product_status:known_affected": "3",
      "source": "Microsoft CSAF VEX",
      "status": "final",
      "title": "spi: tegra210-quad: Fix timeout handling",
      "url": "https://msrc.microsoft.com/csaf/vex/2025/msrc_cve-2025-68746.json",
      "version": "5"
    },
    "redhat_vex": {
      "aggregate_severity": "Low",
      "current_release_date": "2026-11-06T15:31:07+00:00",
      "cve": "CVE-2025-68746",
      "id": "CVE-2025-68746",
      "initial_release_date": "2025-12-24T00:00:00+00:00",
      "product_status:known_affected": "110",
      "product_status:known_not_affected": "90",
      "source": "Red Hat CSAF VEX",
      "status": "final",
      "title": "kernel: spi: tegra210-quad: Fix timeout handling",
      "url": "https://security.access.redhat.com/data/csaf/v2/vex/2025/cve-2025-68746.json",
      "version": "3"
    },
    "vulnrichment": {
      "containers": {
        "adp": [
          {
            "metrics": [
              {
                "other": {
                  "content": {
                    "id": "CVE-2025-68746",
                    "options": [
                      {
                        "Exploitation": "none"
                      },
                      {
                        "Automatable": "no"
                      },
                      {
                        "Technical Impact": "total"
                      }
                    ],
                    "role": "CISA Coordinator",
                    "timestamp": "2026-10-16T15:05:04.392676Z",
                    "version": "2.0.3"
                  },
                  "type": "ssvc"
                }
              }
            ],
            "providerMetadata": {
              "dateUpdated": "2026-10-16T15:05:05.329Z",
              "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
              "shortName": "CISA-ADP"
            },
            "title": "CISA ADP Vulnrichment"
          }
        ],
        "cna": {
          "affected": [
            {
              "defaultStatus": "unaffected",
              "product": "Linux",
              "programFiles": [
                "drivers/spi/spi-tegra210-quad.c"
              ],
              "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
              "vendor": "Linux",
              "versions": [
                {
                  "lessThan": "88db8bb7ed1bb474618acdf05ebd4f0758d244e2",
                  "status": "affected",
                  "version": "921fc1838fb036f690b8ba52e6a6d3644b475cbb",
                  "versionType": "git"
                },
                {
                  "lessThan": "83309dd551cfd60a5a1a98d9cab19f435b44d46d",
                  "status": "affected",
                  "version": "921fc1838fb036f690b8ba52e6a6d3644b475cbb",
                  "versionType": "git"
                },
                {
                  "lessThan": "c934e40246da2c5726d14e94719c514e30840df8",
                  "status": "affected",
                  "version": "921fc1838fb036f690b8ba52e6a6d3644b475cbb",
                  "versionType": "git"
                },
                {
                  "lessThan": "551060efb156c50fe33799038ba8145418cfdeef",
                  "status": "affected",
                  "version": "921fc1838fb036f690b8ba52e6a6d3644b475cbb",
                  "versionType": "git"
                },
                {
                  "lessThan": "bb0c58be84f907285af45657c1d4847b960a12bf",
                  "status": "affected",
                  "version": "921fc1838fb036f690b8ba52e6a6d3644b475cbb",
                  "versionType": "git"
                },
                {
                  "lessThan": "01bbf25c767219b14c3235bfa85906b8d2cb8fbc",
                  "status": "affected",
                  "version": "921fc1838fb036f690b8ba52e6a6d3644b475cbb",
                  "versionType": "git"
                },
                {
                  "lessThan": "b4e002d8a7cee3b1d70efad0e222567f92a73000",
                  "status": "affected",
                  "version": "921fc1838fb036f690b8ba52e6a6d3644b475cbb",
                  "versionType": "git"
                }
              ]
            },
            {
              "defaultStatus": "affected",
              "product": "Linux",
              "programFiles": [
                "drivers/spi/spi-tegra210-quad.c"
              ],
              "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
              "vendor": "Linux",
              "versions": [
                {
                  "status": "affected",
                  "version": "5.12"
                },
                {
                  "lessThan": "5.12",
                  "status": "unaffected",
                  "version": "0",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "5.15.*",
                  "status": "unaffected",
                  "version": "5.15.198",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "6.1.*",
                  "status": "unaffected",
                  "version": "6.1.160",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "6.6.*",
                  "status": "unaffected",
                  "version": "6.6.120",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "6.12.*",
                  "status": "unaffected",
                  "version": "6.12.63",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "6.17.*",
                  "status": "unaffected",
                  "version": "6.17.13",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "6.18.*",
                  "status": "unaffected",
                  "version": "6.18.2",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "*",
                  "status": "unaffected",
                  "version": "6.19",
                  "versionType": "original_commit_for_fix"
                }
              ]
            }
          ],
          "cpeApplicability": [
            {
              "nodes": [
                {
                  "cpeMatch": [
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "5.15.198",
                      "versionStartIncluding": "5.12",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.1.160",
                      "versionStartIncluding": "5.12",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.6.120",
                      "versionStartIncluding": "5.12",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.12.63",
                      "versionStartIncluding": "5.12",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.17.13",
                      "versionStartIncluding": "5.12",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.18.2",
                      "versionStartIncluding": "5.12",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.19",
                      "versionStartIncluding": "5.12",
                      "vulnerable": true
                    }
                  ],
                  "negate": false,
                  "operator": "OR"
                }
              ]
            }
          ],
          "descriptions": [
            {
              "lang": "en",
              "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nspi: tegra210-quad: Fix timeout handling\n\nWhen the CPU that the QSPI interrupt handler runs on (typically CPU 0)\nis excessively busy, it can lead to rare cases of the IRQ thread not\nrunning before the transfer timeout is reached.\n\nWhile handling the timeouts, any pending transfers are cleaned up and\nthe message that they correspond to is marked as failed, which leaves\nthe curr_xfer field pointing at stale memory.\n\nTo avoid this, clear curr_xfer to NULL upon timeout and check for this\ncondition when the IRQ thread is finally run.\n\nWhile at it, also make sure to clear interrupts on failure so that new\ninterrupts can be run.\n\nA better, more involved, fix would move the interrupt clearing into a\nhard IRQ handler. Ideally we would also want to signal that the IRQ\nthread no longer needs to be run after the timeout is hit to avoid the\nextra check for a valid transfer."
            }
          ],
          "metrics": [
            {
              "cvssV3_1": {
                "baseScore": 7.8,
                "baseSeverity": "HIGH",
                "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
                "version": "3.1"
              },
              "scenarios": [
                {
                  "lang": "en",
                  "value": "AV:L - A local process can reach the vulnerable controller through SPI/MTD device I/O or flash-backed filesystem access; the controller is not inherently network-facing.\nAC:L - The attacker can repeatedly initiate transfers while generating CPU or interrupt contention to delay the threaded IRQ beyond the fixed timeout. The race is therefore attacker-influenceable and repeatable.\nPR:L - An ordinary user with access to an exposed spidev/MTD node or mounted SPI-NOR storage can initiate transfers, and the relevant read and SPI ioctl paths impose no capability check.\nUI:N - Exploitation requires no action by another user after the attacker initiates the transfer and scheduling race.\nS:U - The stale-pointer corruption occurs within the host kernel and does not inherently cross a VM, IOMMU, or other security authority boundary.\nC:H - The stale spi_transfer exposes freed buffer pointers and DMA addresses, providing potentially attacker-shaped kernel-memory reads and information disclosure.\nI:H - The PIO and DMA receive paths write through stale buffer pointers and can remap reclaimed transfer fields, making arbitrary kernel-memory corruption and control-flow hijacking defensible.\nA:H - Dereferencing stale transfer or buffer memory can cause a kernel fault, panic, or controller failure, and the condition can be triggered repeatedly."
                }
              ]
            }
          ],
          "providerMetadata": {
            "dateUpdated": "2026-08-05T12:11:15.698Z",
            "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "shortName": "Linux"
          },
          "references": [
            {
              "url": "https://git.kernel.org/stable/c/88db8bb7ed1bb474618acdf05ebd4f0758d244e2"
            },
            {
              "url": "https://git.kernel.org/stable/c/83309dd551cfd60a5a1a98d9cab19f435b44d46d"
            },
            {
              "url": "https://git.kernel.org/stable/c/c934e40246da2c5726d14e94719c514e30840df8"
            },
            {
              "url": "https://git.kernel.org/stable/c/551060efb156c50fe33799038ba8145418cfdeef"
            },
            {
              "url": "https://git.kernel.org/stable/c/bb0c58be84f907285af45657c1d4847b960a12bf"
            },
            {
              "url": "https://git.kernel.org/stable/c/01bbf25c767219b14c3235bfa85906b8d2cb8fbc"
            },
            {
              "url": "https://git.kernel.org/stable/c/b4e002d8a7cee3b1d70efad0e222567f92a73000"
            }
          ],
          "title": "spi: tegra210-quad: Fix timeout handling",
          "x_generator": {
            "engine": "bippy-1.2.0"
          }
        }
      },
      "cveMetadata": {
        "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "assignerShortName": "Linux",
        "cveId": "CVE-2025-68746",
        "datePublished": "2025-12-24T12:09:42.213Z",
        "dateReserved": "2025-12-24T10:30:51.031Z",
        "dateUpdated": "2026-10-16T15:09:44.157Z",
        "state": "PUBLISHED"
      },
      "dataType": "CVE_RECORD",
      "dataVersion": "5.2"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.