CVE-2025-68206 (GCVE-0-2025-68206)

Vulnerability from cvelistv5 – Published: 2025-12-16 13:48 – Updated: 2026-11-10 12:37
VLAI
Title
netfilter: nft_ct: add seqadj extension for natted connections
Summary
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: add seqadj extension for natted connections Sequence adjustment may be required for FTP traffic with PASV/EPSV modes. due to need to re-write packet payload (IP, port) on the ftp control connection. This can require changes to the TCP length and expected seq / ack_seq. The easiest way to reproduce this issue is with PASV mode. Example ruleset: table inet ftp_nat { ct helper ftp_helper { type "ftp" protocol tcp l3proto inet } chain prerouting { type filter hook prerouting priority 0; policy accept; tcp dport 21 ct state new ct helper set "ftp_helper" } } table ip nat { chain prerouting { type nat hook prerouting priority -100; policy accept; tcp dport 21 dnat ip prefix to ip daddr map { 192.168.100.1 : 192.168.13.2/32 } } chain postrouting { type nat hook postrouting priority 100 ; policy accept; tcp sport 21 snat ip prefix to ip saddr map { 192.168.13.2 : 192.168.100.1/32 } } } Note that the ftp helper gets assigned *after* the dnat setup. The inverse (nat after helper assign) is handled by an existing check in nf_nat_setup_info() and will not show the problem. Topoloy: +-------------------+ +----------------------------------+ | FTP: 192.168.13.2 | <-> | NAT: 192.168.13.3, 192.168.100.1 | +-------------------+ +----------------------------------+ | +-----------------------+ | Client: 192.168.100.2 | +-----------------------+ ftp nat changes do not work as expected in this case: Connected to 192.168.100.1. [..] ftp> epsv EPSV/EPRT on IPv4 off. ftp> ls 227 Entering passive mode (192,168,100,1,209,129). 421 Service not available, remote server has closed connection. Kernel logs: Missing nfct_seqadj_ext_add() setup call WARNING: CPU: 1 PID: 0 at net/netfilter/nf_conntrack_seqadj.c:41 [..] __nf_nat_mangle_tcp_packet+0x100/0x160 [nf_nat] nf_nat_ftp+0x142/0x280 [nf_nat_ftp] help+0x4d1/0x880 [nf_conntrack_ftp] nf_confirm+0x122/0x2e0 [nf_conntrack] nf_hook_slow+0x3c/0xb0 .. Fix this by adding the required extension when a conntrack helper is assigned to a connection that has a nat binding.
SSVC
Exploitation: none Automatable: yes Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-10-15 22:00 UTC
Assigner
Linux CNA
Impacted products
Vendor Product Version
Linux Linux Affected: 1a64edf54f55d7956cf5a0d95898bc1f84f9b818 , < 83273af0b60c093ba0085c205864d8542e1b1653 (git)
Affected: 1a64edf54f55d7956cf5a0d95898bc1f84f9b818 , < b19492c25eff04852e0cb58f9bb8238b6695ed2d (git)
Affected: 1a64edf54f55d7956cf5a0d95898bc1f84f9b818 , < 4de80f0dc3868408dd7fe9817e507123c9dd8bb0 (git)
Affected: 1a64edf54f55d7956cf5a0d95898bc1f84f9b818 , < b477ef7fa612fa45b6b3134d90d1eeb09396500a (git)
Affected: 1a64edf54f55d7956cf5a0d95898bc1f84f9b818 , < 4ab2cd906e4e1a19ddbda6eb532851b0e9cda110 (git)
Affected: 1a64edf54f55d7956cf5a0d95898bc1f84f9b818 , < 2b52d89cbbb0dbe3e948d8d9a91e704316dccfe6 (git)
Affected: 1a64edf54f55d7956cf5a0d95898bc1f84f9b818 , < 90918e3b6404c2a37837b8f11692471b4c512de2 (git)
Create a notification for this product.
Linux Linux Affected: 4.12
Unaffected: 0 , < 4.12 (semver)
Unaffected: 5.10.253 , ≤ 5.10.* (semver)
Unaffected: 5.15.203 , ≤ 5.15.* (semver)
Unaffected: 6.1.167 , ≤ 6.1.* (semver)
Unaffected: 6.6.130 , ≤ 6.6.* (semver)
Unaffected: 6.12.64 , ≤ 6.12.* (semver)
Unaffected: 6.17.9 , ≤ 6.17.* (semver)
Unaffected: 6.18 , ≤ * (original_commit_for_fix)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0) Affected: V3.1.6 , < * (custom)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0) Affected: V3.1.5 , < * (custom)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0) Affected: V3.1.7 , < * (custom)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0) Affected: V3.1.6 , < * (custom)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0) Affected: V3.1.5 , < * (custom)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0) Affected: V3.1.7 , < * (custom)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0) Affected: V3.1.6 , < * (custom)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0) Affected: V3.1.5 , < * (custom)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0) Affected: V3.1.7 , < * (custom)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0) Affected: V3.1.6 , < * (custom)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0) Affected: V3.1.5 , < * (custom)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0) Affected: V3.1.7 , < * (custom)
Create a notification for this product.
Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem Affected: 0 , < * (custom)
Create a notification for this product.
Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0) Affected: V3.1.6 , < * (custom)
Create a notification for this product.
Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0) Affected: V3.1.5 , < * (custom)
Create a notification for this product.
Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0) Affected: V3.1.7 , < * (custom)
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "affected": [
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.6",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.5",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.7",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.6",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.5",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.7",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.6",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.5",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.7",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.6",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.5",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.7",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "0",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.6",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.5",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.7",
                "versionType": "custom"
              }
            ]
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-11-10T12:37:56.375Z",
          "orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
          "shortName": "siemens-SADP"
        },
        "references": [
          {
            "url": "https://cert-portal.siemens.com/productcert/html/ssa-082556.html"
          },
          {
            "url": "https://cert-portal.siemens.com/productcert/html/ssa-019113.html"
          },
          {
            "url": "https://cert-portal.siemens.com/productcert/html/ssa-457936.html"
          },
          {
            "url": "https://cert-portal.siemens.com/productcert/html/ssa-784472.html"
          }
        ],
        "x_adpType": "supplier"
      },
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2025-68206",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "yes"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-10-15T22:00:08.666521Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-10-15T22:02:47.582Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "net/netfilter/nft_ct.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "83273af0b60c093ba0085c205864d8542e1b1653",
              "status": "affected",
              "version": "1a64edf54f55d7956cf5a0d95898bc1f84f9b818",
              "versionType": "git"
            },
            {
              "lessThan": "b19492c25eff04852e0cb58f9bb8238b6695ed2d",
              "status": "affected",
              "version": "1a64edf54f55d7956cf5a0d95898bc1f84f9b818",
              "versionType": "git"
            },
            {
              "lessThan": "4de80f0dc3868408dd7fe9817e507123c9dd8bb0",
              "status": "affected",
              "version": "1a64edf54f55d7956cf5a0d95898bc1f84f9b818",
              "versionType": "git"
            },
            {
              "lessThan": "b477ef7fa612fa45b6b3134d90d1eeb09396500a",
              "status": "affected",
              "version": "1a64edf54f55d7956cf5a0d95898bc1f84f9b818",
              "versionType": "git"
            },
            {
              "lessThan": "4ab2cd906e4e1a19ddbda6eb532851b0e9cda110",
              "status": "affected",
              "version": "1a64edf54f55d7956cf5a0d95898bc1f84f9b818",
              "versionType": "git"
            },
            {
              "lessThan": "2b52d89cbbb0dbe3e948d8d9a91e704316dccfe6",
              "status": "affected",
              "version": "1a64edf54f55d7956cf5a0d95898bc1f84f9b818",
              "versionType": "git"
            },
            {
              "lessThan": "90918e3b6404c2a37837b8f11692471b4c512de2",
              "status": "affected",
              "version": "1a64edf54f55d7956cf5a0d95898bc1f84f9b818",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "net/netfilter/nft_ct.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "4.12"
            },
            {
              "lessThan": "4.12",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.10.*",
              "status": "unaffected",
              "version": "5.10.253",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.15.*",
              "status": "unaffected",
              "version": "5.15.203",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.1.*",
              "status": "unaffected",
              "version": "6.1.167",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.6.*",
              "status": "unaffected",
              "version": "6.6.130",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.64",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.17.*",
              "status": "unaffected",
              "version": "6.17.9",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "6.18",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.10.253",
                  "versionStartIncluding": "4.12",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.15.203",
                  "versionStartIncluding": "4.12",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.1.167",
                  "versionStartIncluding": "4.12",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.6.130",
                  "versionStartIncluding": "4.12",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.12.64",
                  "versionStartIncluding": "4.12",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.17.9",
                  "versionStartIncluding": "4.12",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.18",
                  "versionStartIncluding": "4.12",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnetfilter: nft_ct: add seqadj extension for natted connections\n\nSequence adjustment may be required for FTP traffic with PASV/EPSV modes.\ndue to need to re-write packet payload (IP, port) on the ftp control\nconnection. This can require changes to the TCP length and expected\nseq / ack_seq.\n\nThe easiest way to reproduce this issue is with PASV mode.\nExample ruleset:\ntable inet ftp_nat {\n        ct helper ftp_helper {\n                type \"ftp\" protocol tcp\n                l3proto inet\n        }\n\n        chain prerouting {\n                type filter hook prerouting priority 0; policy accept;\n                tcp dport 21 ct state new ct helper set \"ftp_helper\"\n        }\n}\ntable ip nat {\n        chain prerouting {\n                type nat hook prerouting priority -100; policy accept;\n                tcp dport 21 dnat ip prefix to ip daddr map {\n\t\t\t192.168.100.1 : 192.168.13.2/32 }\n        }\n\n        chain postrouting {\n                type nat hook postrouting priority 100 ; policy accept;\n                tcp sport 21 snat ip prefix to ip saddr map {\n\t\t\t192.168.13.2 : 192.168.100.1/32 }\n        }\n}\n\nNote that the ftp helper gets assigned *after* the dnat setup.\n\nThe inverse (nat after helper assign) is handled by an existing\ncheck in nf_nat_setup_info() and will not show the problem.\n\nTopoloy:\n\n +-------------------+     +----------------------------------+\n | FTP: 192.168.13.2 | \u003c-\u003e | NAT: 192.168.13.3, 192.168.100.1 |\n +-------------------+     +----------------------------------+\n                                      |\n                         +-----------------------+\n                         | Client: 192.168.100.2 |\n                         +-----------------------+\n\nftp nat changes do not work as expected in this case:\nConnected to 192.168.100.1.\n[..]\nftp\u003e epsv\nEPSV/EPRT on IPv4 off.\nftp\u003e ls\n227 Entering passive mode (192,168,100,1,209,129).\n421 Service not available, remote server has closed connection.\n\nKernel logs:\nMissing nfct_seqadj_ext_add() setup call\nWARNING: CPU: 1 PID: 0 at net/netfilter/nf_conntrack_seqadj.c:41\n[..]\n __nf_nat_mangle_tcp_packet+0x100/0x160 [nf_nat]\n nf_nat_ftp+0x142/0x280 [nf_nat_ftp]\n help+0x4d1/0x880 [nf_conntrack_ftp]\n nf_confirm+0x122/0x2e0 [nf_conntrack]\n nf_hook_slow+0x3c/0xb0\n ..\n\nFix this by adding the required extension when a conntrack helper is assigned\nto a connection that has a nat binding."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "scenarios": [
            {
              "lang": "en",
              "value": "AV:N - On an internet-facing gateway with the affected DNAT-before-helper rules, a remote FTP client can reach the path by requesting PASV/EPSV and causing the server reply to traverse netfilter.\nAC:L - Once the affected FTP NAT configuration exists, a length-changing payload rewrite triggers the flaw deterministically. No race, timing, or attacker-uncontrollable memory layout is required.\nPR:N - CAP_NET_ADMIN is required only for the operator to install the ruleset, not for exploitation. A remote client of an anonymous FTP service needs no account or kernel privilege.\nUI:N - No victim action is required after the FTP service and NAT rules are deployed; the network protocol exchange triggers the vulnerable path.\nS:U - The impact remains within the gateway\u0027s kernel and system security authority, without crossing a VM, IOMMU, or comparable boundary.\nC:N - The missing extension is detected before dereference, and the path performs no out-of-bounds read, stale-memory access, or information disclosure.\nI:N - There is no memory corruption or attacker-controlled write primitive. The intended FTP payload rewrite merely becomes TCP-sequence-desynchronized because its adjustment state is not recorded.\nA:H - The path reliably executes WARN_ONCE, which causes a complete kernel panic on reasonable panic_on_warn deployments. Otherwise, the absent sequence translation disrupts affected FTP sessions."
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-08-05T12:10:11.706Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/83273af0b60c093ba0085c205864d8542e1b1653"
        },
        {
          "url": "https://git.kernel.org/stable/c/b19492c25eff04852e0cb58f9bb8238b6695ed2d"
        },
        {
          "url": "https://git.kernel.org/stable/c/4de80f0dc3868408dd7fe9817e507123c9dd8bb0"
        },
        {
          "url": "https://git.kernel.org/stable/c/b477ef7fa612fa45b6b3134d90d1eeb09396500a"
        },
        {
          "url": "https://git.kernel.org/stable/c/4ab2cd906e4e1a19ddbda6eb532851b0e9cda110"
        },
        {
          "url": "https://git.kernel.org/stable/c/2b52d89cbbb0dbe3e948d8d9a91e704316dccfe6"
        },
        {
          "url": "https://git.kernel.org/stable/c/90918e3b6404c2a37837b8f11692471b4c512de2"
        }
      ],
      "title": "netfilter: nft_ct: add seqadj extension for natted connections",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2025-68206",
    "datePublished": "2025-12-16T13:48:33.763Z",
    "dateReserved": "2025-12-16T13:41:40.255Z",
    "dateUpdated": "2026-11-10T12:37:56.375Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2025-68206",
      "date": "2026-11-19",
      "epss": "0.00763",
      "percentile": "0.56142"
    },
    "microsoft_vex": {
      "current_release_date": "2026-03-27T14:36:23.000Z",
      "cve": "CVE-2025-68206",
      "id": "msrc_CVE-2025-68206",
      "initial_release_date": "2025-12-17T01:04:31.000Z",
      "product_status:fixed": "1",
      "product_status:known_affected": "5",
      "source": "Microsoft CSAF VEX",
      "status": "final",
      "title": "netfilter: nft_ct: add seqadj extension for natted connections",
      "url": "https://msrc.microsoft.com/csaf/vex/2025/msrc_cve-2025-68206.json",
      "version": "6"
    },
    "redhat_vex": {
      "aggregate_severity": "Low",
      "current_release_date": "2026-11-07T04:41:07+00:00",
      "cve": "CVE-2025-68206",
      "id": "CVE-2025-68206",
      "initial_release_date": "2025-12-16T00:00:00+00:00",
      "product_status:known_affected": "158",
      "product_status:known_not_affected": "42",
      "source": "Red Hat CSAF VEX",
      "status": "final",
      "title": "kernel: netfilter: nft_ct: add seqadj extension for natted connections",
      "url": "https://security.access.redhat.com/data/csaf/v2/vex/2025/cve-2025-68206.json",
      "version": "3"
    },
    "vulnrichment": {
      "containers": {
        "adp": [
          {
            "affected": [
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.6",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.5",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.7",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.6",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.5",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.7",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.6",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.5",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.7",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.6",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.5",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.7",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 TM MFP - GNU/Linux subsystem",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "0",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.6",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.5",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.7",
                    "versionType": "custom"
                  }
                ]
              }
            ],
            "providerMetadata": {
              "dateUpdated": "2026-11-10T12:37:56.375Z",
              "orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
              "shortName": "siemens-SADP"
            },
            "references": [
              {
                "url": "https://cert-portal.siemens.com/productcert/html/ssa-082556.html"
              },
              {
                "url": "https://cert-portal.siemens.com/productcert/html/ssa-019113.html"
              },
              {
                "url": "https://cert-portal.siemens.com/productcert/html/ssa-457936.html"
              },
              {
                "url": "https://cert-portal.siemens.com/productcert/html/ssa-784472.html"
              }
            ],
            "x_adpType": "supplier"
          },
          {
            "metrics": [
              {
                "other": {
                  "content": {
                    "id": "CVE-2025-68206",
                    "options": [
                      {
                        "Exploitation": "none"
                      },
                      {
                        "Automatable": "yes"
                      },
                      {
                        "Technical Impact": "partial"
                      }
                    ],
                    "role": "CISA Coordinator",
                    "timestamp": "2026-10-15T22:00:08.666521Z",
                    "version": "2.0.3"
                  },
                  "type": "ssvc"
                }
              }
            ],
            "providerMetadata": {
              "dateUpdated": "2026-10-15T22:00:09.429Z",
              "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
              "shortName": "CISA-ADP"
            },
            "title": "CISA ADP Vulnrichment"
          }
        ],
        "cna": {
          "affected": [
            {
              "defaultStatus": "unaffected",
              "product": "Linux",
              "programFiles": [
                "net/netfilter/nft_ct.c"
              ],
              "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
              "vendor": "Linux",
              "versions": [
                {
                  "lessThan": "83273af0b60c093ba0085c205864d8542e1b1653",
                  "status": "affected",
                  "version": "1a64edf54f55d7956cf5a0d95898bc1f84f9b818",
                  "versionType": "git"
                },
                {
                  "lessThan": "b19492c25eff04852e0cb58f9bb8238b6695ed2d",
                  "status": "affected",
                  "version": "1a64edf54f55d7956cf5a0d95898bc1f84f9b818",
                  "versionType": "git"
                },
                {
                  "lessThan": "4de80f0dc3868408dd7fe9817e507123c9dd8bb0",
                  "status": "affected",
                  "version": "1a64edf54f55d7956cf5a0d95898bc1f84f9b818",
                  "versionType": "git"
                },
                {
                  "lessThan": "b477ef7fa612fa45b6b3134d90d1eeb09396500a",
                  "status": "affected",
                  "version": "1a64edf54f55d7956cf5a0d95898bc1f84f9b818",
                  "versionType": "git"
                },
                {
                  "lessThan": "4ab2cd906e4e1a19ddbda6eb532851b0e9cda110",
                  "status": "affected",
                  "version": "1a64edf54f55d7956cf5a0d95898bc1f84f9b818",
                  "versionType": "git"
                },
                {
                  "lessThan": "2b52d89cbbb0dbe3e948d8d9a91e704316dccfe6",
                  "status": "affected",
                  "version": "1a64edf54f55d7956cf5a0d95898bc1f84f9b818",
                  "versionType": "git"
                },
                {
                  "lessThan": "90918e3b6404c2a37837b8f11692471b4c512de2",
                  "status": "affected",
                  "version": "1a64edf54f55d7956cf5a0d95898bc1f84f9b818",
                  "versionType": "git"
                }
              ]
            },
            {
              "defaultStatus": "affected",
              "product": "Linux",
              "programFiles": [
                "net/netfilter/nft_ct.c"
              ],
              "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
              "vendor": "Linux",
              "versions": [
                {
                  "status": "affected",
                  "version": "4.12"
                },
                {
                  "lessThan": "4.12",
                  "status": "unaffected",
                  "version": "0",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "5.10.*",
                  "status": "unaffected",
                  "version": "5.10.253",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "5.15.*",
                  "status": "unaffected",
                  "version": "5.15.203",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "6.1.*",
                  "status": "unaffected",
                  "version": "6.1.167",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "6.6.*",
                  "status": "unaffected",
                  "version": "6.6.130",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "6.12.*",
                  "status": "unaffected",
                  "version": "6.12.64",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "6.17.*",
                  "status": "unaffected",
                  "version": "6.17.9",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "*",
                  "status": "unaffected",
                  "version": "6.18",
                  "versionType": "original_commit_for_fix"
                }
              ]
            }
          ],
          "cpeApplicability": [
            {
              "nodes": [
                {
                  "cpeMatch": [
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "5.10.253",
                      "versionStartIncluding": "4.12",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "5.15.203",
                      "versionStartIncluding": "4.12",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.1.167",
                      "versionStartIncluding": "4.12",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.6.130",
                      "versionStartIncluding": "4.12",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.12.64",
                      "versionStartIncluding": "4.12",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.17.9",
                      "versionStartIncluding": "4.12",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.18",
                      "versionStartIncluding": "4.12",
                      "vulnerable": true
                    }
                  ],
                  "negate": false,
                  "operator": "OR"
                }
              ]
            }
          ],
          "descriptions": [
            {
              "lang": "en",
              "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnetfilter: nft_ct: add seqadj extension for natted connections\n\nSequence adjustment may be required for FTP traffic with PASV/EPSV modes.\ndue to need to re-write packet payload (IP, port) on the ftp control\nconnection. This can require changes to the TCP length and expected\nseq / ack_seq.\n\nThe easiest way to reproduce this issue is with PASV mode.\nExample ruleset:\ntable inet ftp_nat {\n        ct helper ftp_helper {\n                type \"ftp\" protocol tcp\n                l3proto inet\n        }\n\n        chain prerouting {\n                type filter hook prerouting priority 0; policy accept;\n                tcp dport 21 ct state new ct helper set \"ftp_helper\"\n        }\n}\ntable ip nat {\n        chain prerouting {\n                type nat hook prerouting priority -100; policy accept;\n                tcp dport 21 dnat ip prefix to ip daddr map {\n\t\t\t192.168.100.1 : 192.168.13.2/32 }\n        }\n\n        chain postrouting {\n                type nat hook postrouting priority 100 ; policy accept;\n                tcp sport 21 snat ip prefix to ip saddr map {\n\t\t\t192.168.13.2 : 192.168.100.1/32 }\n        }\n}\n\nNote that the ftp helper gets assigned *after* the dnat setup.\n\nThe inverse (nat after helper assign) is handled by an existing\ncheck in nf_nat_setup_info() and will not show the problem.\n\nTopoloy:\n\n +-------------------+     +----------------------------------+\n | FTP: 192.168.13.2 | \u003c-\u003e | NAT: 192.168.13.3, 192.168.100.1 |\n +-------------------+     +----------------------------------+\n                                      |\n                         +-----------------------+\n                         | Client: 192.168.100.2 |\n                         +-----------------------+\n\nftp nat changes do not work as expected in this case:\nConnected to 192.168.100.1.\n[..]\nftp\u003e epsv\nEPSV/EPRT on IPv4 off.\nftp\u003e ls\n227 Entering passive mode (192,168,100,1,209,129).\n421 Service not available, remote server has closed connection.\n\nKernel logs:\nMissing nfct_seqadj_ext_add() setup call\nWARNING: CPU: 1 PID: 0 at net/netfilter/nf_conntrack_seqadj.c:41\n[..]\n __nf_nat_mangle_tcp_packet+0x100/0x160 [nf_nat]\n nf_nat_ftp+0x142/0x280 [nf_nat_ftp]\n help+0x4d1/0x880 [nf_conntrack_ftp]\n nf_confirm+0x122/0x2e0 [nf_conntrack]\n nf_hook_slow+0x3c/0xb0\n ..\n\nFix this by adding the required extension when a conntrack helper is assigned\nto a connection that has a nat binding."
            }
          ],
          "metrics": [
            {
              "cvssV3_1": {
                "baseScore": 7.5,
                "baseSeverity": "HIGH",
                "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                "version": "3.1"
              },
              "scenarios": [
                {
                  "lang": "en",
                  "value": "AV:N - On an internet-facing gateway with the affected DNAT-before-helper rules, a remote FTP client can reach the path by requesting PASV/EPSV and causing the server reply to traverse netfilter.\nAC:L - Once the affected FTP NAT configuration exists, a length-changing payload rewrite triggers the flaw deterministically. No race, timing, or attacker-uncontrollable memory layout is required.\nPR:N - CAP_NET_ADMIN is required only for the operator to install the ruleset, not for exploitation. A remote client of an anonymous FTP service needs no account or kernel privilege.\nUI:N - No victim action is required after the FTP service and NAT rules are deployed; the network protocol exchange triggers the vulnerable path.\nS:U - The impact remains within the gateway\u0027s kernel and system security authority, without crossing a VM, IOMMU, or comparable boundary.\nC:N - The missing extension is detected before dereference, and the path performs no out-of-bounds read, stale-memory access, or information disclosure.\nI:N - There is no memory corruption or attacker-controlled write primitive. The intended FTP payload rewrite merely becomes TCP-sequence-desynchronized because its adjustment state is not recorded.\nA:H - The path reliably executes WARN_ONCE, which causes a complete kernel panic on reasonable panic_on_warn deployments. Otherwise, the absent sequence translation disrupts affected FTP sessions."
                }
              ]
            }
          ],
          "providerMetadata": {
            "dateUpdated": "2026-08-05T12:10:11.706Z",
            "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "shortName": "Linux"
          },
          "references": [
            {
              "url": "https://git.kernel.org/stable/c/83273af0b60c093ba0085c205864d8542e1b1653"
            },
            {
              "url": "https://git.kernel.org/stable/c/b19492c25eff04852e0cb58f9bb8238b6695ed2d"
            },
            {
              "url": "https://git.kernel.org/stable/c/4de80f0dc3868408dd7fe9817e507123c9dd8bb0"
            },
            {
              "url": "https://git.kernel.org/stable/c/b477ef7fa612fa45b6b3134d90d1eeb09396500a"
            },
            {
              "url": "https://git.kernel.org/stable/c/4ab2cd906e4e1a19ddbda6eb532851b0e9cda110"
            },
            {
              "url": "https://git.kernel.org/stable/c/2b52d89cbbb0dbe3e948d8d9a91e704316dccfe6"
            },
            {
              "url": "https://git.kernel.org/stable/c/90918e3b6404c2a37837b8f11692471b4c512de2"
            }
          ],
          "title": "netfilter: nft_ct: add seqadj extension for natted connections",
          "x_generator": {
            "engine": "bippy-1.2.0"
          }
        }
      },
      "cveMetadata": {
        "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "assignerShortName": "Linux",
        "cveId": "CVE-2025-68206",
        "datePublished": "2025-12-16T13:48:33.763Z",
        "dateReserved": "2025-12-16T13:41:40.255Z",
        "dateUpdated": "2026-11-10T12:37:56.375Z",
        "state": "PUBLISHED"
      },
      "dataType": "CVE_RECORD",
      "dataVersion": "5.2"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.