CVE-2025-38376 (GCVE-0-2025-38376)

Vulnerability from cvelistv5 – Published: 2025-07-25 12:53 – Updated: 2026-05-11 21:26
VLAI
Title
usb: chipidea: udc: disconnect/reconnect from host when do suspend/resume
Summary
In the Linux kernel, the following vulnerability has been resolved: usb: chipidea: udc: disconnect/reconnect from host when do suspend/resume Shawn and John reported a hang issue during system suspend as below: - USB gadget is enabled as Ethernet - There is data transfer over USB Ethernet (scp a big file between host and device) - Device is going in/out suspend (echo mem > /sys/power/state) The root cause is the USB device controller is suspended but the USB bus is still active which caused the USB host continues to transfer data with device and the device continues to queue USB requests (in this case, a delayed TCP ACK packet trigger the issue) after controller is suspended, however the USB controller clock is already gated off. Then if udc driver access registers after that point, the system will hang. The correct way to avoid such issue is to disconnect device from host when the USB bus is not at suspend state. Then the host will receive disconnect event and stop data transfer in time. To continue make USB gadget device work after system resume, this will reconnect device automatically. To make usb wakeup work if USB bus is already at suspend state, this will keep connection for it only when USB device controller has enabled wakeup capability.
Severity
No CVSS data available.
Assigner
Linux CNA
Impacted products
Vendor Product Version
Linux Linux Affected: 235ffc17d0146d806f6ad8c094c24ff4878f2edb , < 937f49be49d6ee696eb5457c21ff89c135c9b5ae (git)
Affected: 235ffc17d0146d806f6ad8c094c24ff4878f2edb , < c68a27bbebbdb4e0ccd45d4f0df7111a09ddac24 (git)
Affected: 235ffc17d0146d806f6ad8c094c24ff4878f2edb , < 5fd585fedb79bac2af9976b0fa3ffa354f0cc0bb (git)
Affected: 235ffc17d0146d806f6ad8c094c24ff4878f2edb , < 31a6afbe86e8e9deba9ab53876ec49eafc7fd901 (git)
Create a notification for this product.
Linux Linux Affected: 6.2
Unaffected: 0 , < 6.2 (semver)
Unaffected: 6.6.97 , ≤ 6.6.* (semver)
Unaffected: 6.12.37 , ≤ 6.12.* (semver)
Unaffected: 6.15.6 , ≤ 6.15.* (semver)
Unaffected: 6.16 , ≤ * (original_commit_for_fix)
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/usb/chipidea/udc.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "937f49be49d6ee696eb5457c21ff89c135c9b5ae",
              "status": "affected",
              "version": "235ffc17d0146d806f6ad8c094c24ff4878f2edb",
              "versionType": "git"
            },
            {
              "lessThan": "c68a27bbebbdb4e0ccd45d4f0df7111a09ddac24",
              "status": "affected",
              "version": "235ffc17d0146d806f6ad8c094c24ff4878f2edb",
              "versionType": "git"
            },
            {
              "lessThan": "5fd585fedb79bac2af9976b0fa3ffa354f0cc0bb",
              "status": "affected",
              "version": "235ffc17d0146d806f6ad8c094c24ff4878f2edb",
              "versionType": "git"
            },
            {
              "lessThan": "31a6afbe86e8e9deba9ab53876ec49eafc7fd901",
              "status": "affected",
              "version": "235ffc17d0146d806f6ad8c094c24ff4878f2edb",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/usb/chipidea/udc.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.2"
            },
            {
              "lessThan": "6.2",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.6.*",
              "status": "unaffected",
              "version": "6.6.97",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.37",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.15.*",
              "status": "unaffected",
              "version": "6.15.6",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "6.16",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.6.97",
                  "versionStartIncluding": "6.2",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.12.37",
                  "versionStartIncluding": "6.2",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.15.6",
                  "versionStartIncluding": "6.2",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.16",
                  "versionStartIncluding": "6.2",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nusb: chipidea: udc: disconnect/reconnect from host when do suspend/resume\n\nShawn and John reported a hang issue during system suspend as below:\n\n - USB gadget is enabled as Ethernet\n - There is data transfer over USB Ethernet (scp a big file between host\n                                             and device)\n - Device is going in/out suspend (echo mem \u003e /sys/power/state)\n\nThe root cause is the USB device controller is suspended but the USB bus\nis still active which caused the USB host continues to transfer data with\ndevice and the device continues to queue USB requests (in this case, a\ndelayed TCP ACK packet trigger the issue) after controller is suspended,\nhowever the USB controller clock is already gated off. Then if udc driver\naccess registers after that point, the system will hang.\n\nThe correct way to avoid such issue is to disconnect device from host when\nthe USB bus is not at suspend state. Then the host will receive disconnect\nevent and stop data transfer in time. To continue make USB gadget device\nwork after system resume, this will reconnect device automatically.\n\nTo make usb wakeup work if USB bus is already at suspend state, this will\nkeep connection for it only when USB device controller has enabled wakeup\ncapability."
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-05-11T21:26:47.591Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/937f49be49d6ee696eb5457c21ff89c135c9b5ae"
        },
        {
          "url": "https://git.kernel.org/stable/c/c68a27bbebbdb4e0ccd45d4f0df7111a09ddac24"
        },
        {
          "url": "https://git.kernel.org/stable/c/5fd585fedb79bac2af9976b0fa3ffa354f0cc0bb"
        },
        {
          "url": "https://git.kernel.org/stable/c/31a6afbe86e8e9deba9ab53876ec49eafc7fd901"
        }
      ],
      "title": "usb: chipidea: udc: disconnect/reconnect from host when do suspend/resume",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2025-38376",
    "datePublished": "2025-07-25T12:53:18.330Z",
    "dateReserved": "2025-04-16T04:51:24.010Z",
    "dateUpdated": "2026-05-11T21:26:47.591Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2025-38376",
      "date": "2026-11-19",
      "epss": "0.00178",
      "percentile": "0.07468"
    },
    "microsoft_vex": {
      "current_release_date": "2025-09-04T05:14:38.000Z",
      "cve": "CVE-2025-38376",
      "id": "msrc_CVE-2025-38376",
      "initial_release_date": "2025-09-04T05:14:38.000Z",
      "product_status:fixed": "1",
      "product_status:known_affected": "2",
      "source": "Microsoft CSAF VEX",
      "status": "final",
      "title": "usb: chipidea: udc: disconnect/reconnect from host when do suspend/resume",
      "url": "https://msrc.microsoft.com/csaf/vex/2025/msrc_cve-2025-38376.json",
      "version": "1"
    },
    "redhat_vex": {
      "aggregate_severity": "None",
      "current_release_date": "2026-11-06T15:01:58+00:00",
      "cve": "CVE-2025-38376",
      "id": "CVE-2025-38376",
      "initial_release_date": "2025-07-25T00:00:00+00:00",
      "product_status:known_not_affected": "200",
      "source": "Red Hat CSAF VEX",
      "status": "final",
      "title": "kernel: usb: chipidea: udc: disconnect/reconnect from host when do suspend/resume",
      "url": "https://security.access.redhat.com/data/csaf/v2/vex/2025/cve-2025-38376.json",
      "version": "3"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.