CVE-2025-37945 (GCVE-0-2025-37945)

Vulnerability from cvelistv5 – Published: 2025-05-20 15:58 – Updated: 2026-11-10 12:36
VLAI
Title
net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY
Summary
In the Linux kernel, the following vulnerability has been resolved: net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY DSA has 2 kinds of drivers: 1. Those who call dsa_switch_suspend() and dsa_switch_resume() from their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz 2. Those who don't: all others. The above methods should be optional. For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(), and dsa_switch_resume() calls dsa_user_resume() -> phylink_start(). These seem good candidates for setting mac_managed_pm = true because that is essentially its definition [1], but that does not seem to be the biggest problem for now, and is not what this change focuses on. Talking strictly about the 2nd category of DSA drivers here (which do not have MAC managed PM, meaning that for their attached PHYs, mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full), I have noticed that the following warning from mdio_bus_phy_resume() is triggered: WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY && phydev->state != PHY_UP); because the PHY state machine is running. It's running as a result of a previous dsa_user_open() -> ... -> phylink_start() -> phy_start() having been initiated by the user. The previous mdio_bus_phy_suspend() was supposed to have called phy_stop_machine(), but it didn't. So this is why the PHY is in state PHY_NOLINK by the time mdio_bus_phy_resume() runs. mdio_bus_phy_suspend() did not call phy_stop_machine() because for phylink, the phydev->adjust_link function pointer is NULL. This seems a technicality introduced by commit fddd91016d16 ("phylib: fix PAL state machine restart on resume"). That commit was written before phylink existed, and was intended to avoid crashing with consumer drivers which don't use the PHY state machine - phylink always does, when using a PHY. But phylink itself has historically not been developed with suspend/resume in mind, and apparently not tested too much in that scenario, allowing this bug to exist unnoticed for so long. Plus, prior to the WARN_ON(), it would have likely been invisible. This issue is not in fact restricted to type 2 DSA drivers (according to the above ad-hoc classification), but can be extrapolated to any MAC driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where the issue was reported. Assuming mac_managed_pm is set correctly, a quick search indicates the following other drivers might be affected: $ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm drivers/net/ethernet/atheros/ag71xx.c drivers/net/ethernet/microchip/sparx5/sparx5_main.c drivers/net/ethernet/microchip/lan966x/lan966x_main.c drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c drivers/net/ethernet/freescale/dpaa/dpaa_eth.c drivers/net/ethernet/freescale/ucc_geth.c drivers/net/ethernet/freescale/enetc/enetc_pf_common.c drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c drivers/net/ethernet/marvell/mvneta.c drivers/net/ethernet/marvell/prestera/prestera_main.c drivers/net/ethernet/mediatek/mtk_eth_soc.c drivers/net/ethernet/altera/altera_tse_main.c drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c drivers/net/ethernet/meta/fbnic/fbnic_phylink.c drivers/net/ethernet/tehuti/tn40_phy.c drivers/net/ethernet/mscc/ocelot_net.c Make the existing conditions dependent on the PHY device having a phydev->phy_link_change() implementation equal to the default phy_link_change() provided by phylib. Otherwise, we implicitly know that the phydev has the phylink-provided phylink_phy_change() callback, and when phylink is used, the PHY state machine always needs to be stopped/ started on the suspend/resume path. The code is structured as such that if phydev->phy_link_change() is absent, it is a matter of time until the kernel will crash - no need to further complicate the test. Thus, for the situation where the PM is not managed b ---truncated---
Severity
No CVSS data available.
SSVC
Exploitation: none Automatable: no Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-11-05 20:45 UTC
Assigner
Linux CNA
Impacted products
Vendor Product Version
Linux Linux Affected: 744d23c71af39c7dc77ac7c3cac87ae86a181a85 , < 17eef1e44883845b9567afc893dc41e004c08d65 (git)
Affected: 744d23c71af39c7dc77ac7c3cac87ae86a181a85 , < 043aa41c43f8cb9cce75367ea07895ce68b5abb0 (git)
Affected: 744d23c71af39c7dc77ac7c3cac87ae86a181a85 , < a6ed6f8ec81b8ca7100dcd9e62bdbc0dff1b2259 (git)
Affected: 744d23c71af39c7dc77ac7c3cac87ae86a181a85 , < 54e5d00a8de6c13f6c01a94ed48025e882cd15f7 (git)
Affected: 744d23c71af39c7dc77ac7c3cac87ae86a181a85 , < bd4037d51d3f6667636a1383e78e48a5b7b60755 (git)
Affected: 744d23c71af39c7dc77ac7c3cac87ae86a181a85 , < fc75ea20ffb452652f0d4033f38fe88d7cfdae35 (git)
Affected: 47ac7b2f6a1ffef76e55a9ec146881a36673284b (git)
Affected: 7dc0ed411de3450e75b2a9600b5742cbf0908167 (git)
Affected: 5.15.63 , < 5.16 (semver)
Affected: 5.19.4 , < 5.20 (semver)
Create a notification for this product.
Linux Linux Affected: 6.0
Unaffected: 0 , < 6.0 (semver)
Unaffected: 6.1.168 , ≤ 6.1.* (semver)
Unaffected: 6.6.122 , ≤ 6.6.* (semver)
Unaffected: 6.12.24 , ≤ 6.12.* (semver)
Unaffected: 6.13.12 , ≤ 6.13.* (semver)
Unaffected: 6.14.3 , ≤ 6.14.* (semver)
Unaffected: 6.15 , ≤ * (original_commit_for_fix)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0) Affected: V3.1.6 , < * (custom)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0) Affected: V3.1.5 , < * (custom)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0) Affected: V3.1.7 , < * (custom)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0) Affected: V3.1.6 , < * (custom)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0) Affected: V3.1.5 , < * (custom)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0) Affected: V3.1.7 , < * (custom)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0) Affected: V3.1.6 , < * (custom)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0) Affected: V3.1.5 , < * (custom)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0) Affected: V3.1.7 , < * (custom)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0) Affected: V3.1.6 , < * (custom)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0) Affected: V3.1.5 , < * (custom)
Create a notification for this product.
Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0) Affected: V3.1.7 , < * (custom)
Create a notification for this product.
Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0) Affected: V3.1.6 , < * (custom)
Create a notification for this product.
Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0) Affected: V3.1.5 , < * (custom)
Create a notification for this product.
Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0) Affected: V3.1.7 , < * (custom)
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "affected": [
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.6",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.5",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.7",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.6",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.5",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.7",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.6",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.5",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.7",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.6",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.5",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.7",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.6",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.5",
                "versionType": "custom"
              }
            ]
          },
          {
            "defaultStatus": "unknown",
            "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
            "vendor": "Siemens",
            "versions": [
              {
                "lessThan": "*",
                "status": "affected",
                "version": "V3.1.7",
                "versionType": "custom"
              }
            ]
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-11-10T12:36:04.295Z",
          "orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
          "shortName": "siemens-SADP"
        },
        "references": [
          {
            "url": "https://cert-portal.siemens.com/productcert/html/ssa-082556.html"
          },
          {
            "url": "https://cert-portal.siemens.com/productcert/html/ssa-019113.html"
          },
          {
            "url": "https://cert-portal.siemens.com/productcert/html/ssa-457936.html"
          }
        ],
        "x_adpType": "supplier"
      },
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2025-37945",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-11-05T20:45:30.965984Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-11-05T20:52:08.853Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/net/phy/phy_device.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "17eef1e44883845b9567afc893dc41e004c08d65",
              "status": "affected",
              "version": "744d23c71af39c7dc77ac7c3cac87ae86a181a85",
              "versionType": "git"
            },
            {
              "lessThan": "043aa41c43f8cb9cce75367ea07895ce68b5abb0",
              "status": "affected",
              "version": "744d23c71af39c7dc77ac7c3cac87ae86a181a85",
              "versionType": "git"
            },
            {
              "lessThan": "a6ed6f8ec81b8ca7100dcd9e62bdbc0dff1b2259",
              "status": "affected",
              "version": "744d23c71af39c7dc77ac7c3cac87ae86a181a85",
              "versionType": "git"
            },
            {
              "lessThan": "54e5d00a8de6c13f6c01a94ed48025e882cd15f7",
              "status": "affected",
              "version": "744d23c71af39c7dc77ac7c3cac87ae86a181a85",
              "versionType": "git"
            },
            {
              "lessThan": "bd4037d51d3f6667636a1383e78e48a5b7b60755",
              "status": "affected",
              "version": "744d23c71af39c7dc77ac7c3cac87ae86a181a85",
              "versionType": "git"
            },
            {
              "lessThan": "fc75ea20ffb452652f0d4033f38fe88d7cfdae35",
              "status": "affected",
              "version": "744d23c71af39c7dc77ac7c3cac87ae86a181a85",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "47ac7b2f6a1ffef76e55a9ec146881a36673284b",
              "versionType": "git"
            },
            {
              "status": "affected",
              "version": "7dc0ed411de3450e75b2a9600b5742cbf0908167",
              "versionType": "git"
            },
            {
              "lessThan": "5.16",
              "status": "affected",
              "version": "5.15.63",
              "versionType": "semver"
            },
            {
              "lessThan": "5.20",
              "status": "affected",
              "version": "5.19.4",
              "versionType": "semver"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/net/phy/phy_device.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.0"
            },
            {
              "lessThan": "6.0",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.1.*",
              "status": "unaffected",
              "version": "6.1.168",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.6.*",
              "status": "unaffected",
              "version": "6.6.122",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.24",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.13.*",
              "status": "unaffected",
              "version": "6.13.12",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.14.*",
              "status": "unaffected",
              "version": "6.14.3",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "6.15",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.1.168",
                  "versionStartIncluding": "6.0",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.6.122",
                  "versionStartIncluding": "6.0",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.12.24",
                  "versionStartIncluding": "6.0",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.13.12",
                  "versionStartIncluding": "6.0",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.14.3",
                  "versionStartIncluding": "6.0",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.15",
                  "versionStartIncluding": "6.0",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionStartIncluding": "5.15.63",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionStartIncluding": "5.19.4",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnet: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY\n\nDSA has 2 kinds of drivers:\n\n1. Those who call dsa_switch_suspend() and dsa_switch_resume() from\n   their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz\n2. Those who don\u0027t: all others. The above methods should be optional.\n\nFor type 1, dsa_switch_suspend() calls dsa_user_suspend() -\u003e phylink_stop(),\nand dsa_switch_resume() calls dsa_user_resume() -\u003e phylink_start().\nThese seem good candidates for setting mac_managed_pm = true because\nthat is essentially its definition [1], but that does not seem to be the\nbiggest problem for now, and is not what this change focuses on.\n\nTalking strictly about the 2nd category of DSA drivers here (which\ndo not have MAC managed PM, meaning that for their attached PHYs,\nmdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full),\nI have noticed that the following warning from mdio_bus_phy_resume() is\ntriggered:\n\n\tWARN_ON(phydev-\u003estate != PHY_HALTED \u0026\u0026 phydev-\u003estate != PHY_READY \u0026\u0026\n\t\tphydev-\u003estate != PHY_UP);\n\nbecause the PHY state machine is running.\n\nIt\u0027s running as a result of a previous dsa_user_open() -\u003e ... -\u003e\nphylink_start() -\u003e phy_start() having been initiated by the user.\n\nThe previous mdio_bus_phy_suspend() was supposed to have called\nphy_stop_machine(), but it didn\u0027t. So this is why the PHY is in state\nPHY_NOLINK by the time mdio_bus_phy_resume() runs.\n\nmdio_bus_phy_suspend() did not call phy_stop_machine() because for\nphylink, the phydev-\u003eadjust_link function pointer is NULL. This seems a\ntechnicality introduced by commit fddd91016d16 (\"phylib: fix PAL state\nmachine restart on resume\"). That commit was written before phylink\nexisted, and was intended to avoid crashing with consumer drivers which\ndon\u0027t use the PHY state machine - phylink always does, when using a PHY.\nBut phylink itself has historically not been developed with\nsuspend/resume in mind, and apparently not tested too much in that\nscenario, allowing this bug to exist unnoticed for so long. Plus, prior\nto the WARN_ON(), it would have likely been invisible.\n\nThis issue is not in fact restricted to type 2 DSA drivers (according to\nthe above ad-hoc classification), but can be extrapolated to any MAC\ndriver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where\nthe issue was reported. Assuming mac_managed_pm is set correctly, a\nquick search indicates the following other drivers might be affected:\n\n$ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm\ndrivers/net/ethernet/atheros/ag71xx.c\ndrivers/net/ethernet/microchip/sparx5/sparx5_main.c\ndrivers/net/ethernet/microchip/lan966x/lan966x_main.c\ndrivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c\ndrivers/net/ethernet/freescale/fs_enet/fs_enet-main.c\ndrivers/net/ethernet/freescale/dpaa/dpaa_eth.c\ndrivers/net/ethernet/freescale/ucc_geth.c\ndrivers/net/ethernet/freescale/enetc/enetc_pf_common.c\ndrivers/net/ethernet/marvell/mvpp2/mvpp2_main.c\ndrivers/net/ethernet/marvell/mvneta.c\ndrivers/net/ethernet/marvell/prestera/prestera_main.c\ndrivers/net/ethernet/mediatek/mtk_eth_soc.c\ndrivers/net/ethernet/altera/altera_tse_main.c\ndrivers/net/ethernet/wangxun/txgbe/txgbe_phy.c\ndrivers/net/ethernet/meta/fbnic/fbnic_phylink.c\ndrivers/net/ethernet/tehuti/tn40_phy.c\ndrivers/net/ethernet/mscc/ocelot_net.c\n\nMake the existing conditions dependent on the PHY device having a\nphydev-\u003ephy_link_change() implementation equal to the default\nphy_link_change() provided by phylib. Otherwise, we implicitly know that\nthe phydev has the phylink-provided phylink_phy_change() callback, and\nwhen phylink is used, the PHY state machine always needs to be stopped/\nstarted on the suspend/resume path. The code is structured as such that\nif phydev-\u003ephy_link_change() is absent, it is a matter of time until the\nkernel will crash - no need to further complicate the test.\n\nThus, for the situation where the PM is not managed b\n---truncated---"
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-05-23T15:58:37.700Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/17eef1e44883845b9567afc893dc41e004c08d65"
        },
        {
          "url": "https://git.kernel.org/stable/c/043aa41c43f8cb9cce75367ea07895ce68b5abb0"
        },
        {
          "url": "https://git.kernel.org/stable/c/a6ed6f8ec81b8ca7100dcd9e62bdbc0dff1b2259"
        },
        {
          "url": "https://git.kernel.org/stable/c/54e5d00a8de6c13f6c01a94ed48025e882cd15f7"
        },
        {
          "url": "https://git.kernel.org/stable/c/bd4037d51d3f6667636a1383e78e48a5b7b60755"
        },
        {
          "url": "https://git.kernel.org/stable/c/fc75ea20ffb452652f0d4033f38fe88d7cfdae35"
        }
      ],
      "title": "net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2025-37945",
    "datePublished": "2025-05-20T15:58:20.841Z",
    "dateReserved": "2025-04-16T04:51:23.972Z",
    "dateUpdated": "2026-11-10T12:36:04.295Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2025-37945",
      "date": "2026-11-19",
      "epss": "0.00213",
      "percentile": "0.11684"
    },
    "microsoft_vex": {
      "current_release_date": "2026-09-24T01:48:24.000Z",
      "cve": "CVE-2025-37945",
      "id": "msrc_CVE-2025-37945",
      "initial_release_date": "2025-11-18T01:01:28.000Z",
      "product_status:fixed": "1",
      "product_status:known_affected": "10",
      "source": "Microsoft CSAF VEX",
      "status": "final",
      "title": "net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY",
      "url": "https://msrc.microsoft.com/csaf/vex/2025/msrc_cve-2025-37945.json",
      "version": "12"
    },
    "redhat_vex": {
      "aggregate_severity": "Low",
      "current_release_date": "2026-11-07T10:31:52+00:00",
      "cve": "CVE-2025-37945",
      "id": "CVE-2025-37945",
      "initial_release_date": "2025-05-20T00:00:00+00:00",
      "product_status:known_affected": "124",
      "product_status:known_not_affected": "76",
      "source": "Red Hat CSAF VEX",
      "status": "final",
      "title": "kernel: net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY",
      "url": "https://security.access.redhat.com/data/csaf/v2/vex/2025/cve-2025-37945.json",
      "version": "3"
    },
    "vulnrichment": {
      "containers": {
        "adp": [
          {
            "affected": [
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.6",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.5",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.7",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.6",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.5",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.7",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.6",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.5",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.7",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.6",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.5",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.7",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.6",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.5",
                    "versionType": "custom"
                  }
                ]
              },
              {
                "defaultStatus": "unknown",
                "product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0)",
                "vendor": "Siemens",
                "versions": [
                  {
                    "lessThan": "*",
                    "status": "affected",
                    "version": "V3.1.7",
                    "versionType": "custom"
                  }
                ]
              }
            ],
            "providerMetadata": {
              "dateUpdated": "2026-11-10T12:36:04.295Z",
              "orgId": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
              "shortName": "siemens-SADP"
            },
            "references": [
              {
                "url": "https://cert-portal.siemens.com/productcert/html/ssa-082556.html"
              },
              {
                "url": "https://cert-portal.siemens.com/productcert/html/ssa-019113.html"
              },
              {
                "url": "https://cert-portal.siemens.com/productcert/html/ssa-457936.html"
              }
            ],
            "x_adpType": "supplier"
          },
          {
            "metrics": [
              {
                "other": {
                  "content": {
                    "id": "CVE-2025-37945",
                    "options": [
                      {
                        "Exploitation": "none"
                      },
                      {
                        "Automatable": "no"
                      },
                      {
                        "Technical Impact": "partial"
                      }
                    ],
                    "role": "CISA Coordinator",
                    "timestamp": "2026-11-05T20:45:30.965984Z",
                    "version": "2.0.3"
                  },
                  "type": "ssvc"
                }
              }
            ],
            "providerMetadata": {
              "dateUpdated": "2026-11-05T20:45:31.930Z",
              "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
              "shortName": "CISA-ADP"
            },
            "title": "CISA ADP Vulnrichment"
          }
        ],
        "cna": {
          "affected": [
            {
              "defaultStatus": "unaffected",
              "product": "Linux",
              "programFiles": [
                "drivers/net/phy/phy_device.c"
              ],
              "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
              "vendor": "Linux",
              "versions": [
                {
                  "lessThan": "17eef1e44883845b9567afc893dc41e004c08d65",
                  "status": "affected",
                  "version": "744d23c71af39c7dc77ac7c3cac87ae86a181a85",
                  "versionType": "git"
                },
                {
                  "lessThan": "043aa41c43f8cb9cce75367ea07895ce68b5abb0",
                  "status": "affected",
                  "version": "744d23c71af39c7dc77ac7c3cac87ae86a181a85",
                  "versionType": "git"
                },
                {
                  "lessThan": "a6ed6f8ec81b8ca7100dcd9e62bdbc0dff1b2259",
                  "status": "affected",
                  "version": "744d23c71af39c7dc77ac7c3cac87ae86a181a85",
                  "versionType": "git"
                },
                {
                  "lessThan": "54e5d00a8de6c13f6c01a94ed48025e882cd15f7",
                  "status": "affected",
                  "version": "744d23c71af39c7dc77ac7c3cac87ae86a181a85",
                  "versionType": "git"
                },
                {
                  "lessThan": "bd4037d51d3f6667636a1383e78e48a5b7b60755",
                  "status": "affected",
                  "version": "744d23c71af39c7dc77ac7c3cac87ae86a181a85",
                  "versionType": "git"
                },
                {
                  "lessThan": "fc75ea20ffb452652f0d4033f38fe88d7cfdae35",
                  "status": "affected",
                  "version": "744d23c71af39c7dc77ac7c3cac87ae86a181a85",
                  "versionType": "git"
                },
                {
                  "status": "affected",
                  "version": "47ac7b2f6a1ffef76e55a9ec146881a36673284b",
                  "versionType": "git"
                },
                {
                  "status": "affected",
                  "version": "7dc0ed411de3450e75b2a9600b5742cbf0908167",
                  "versionType": "git"
                },
                {
                  "lessThan": "5.16",
                  "status": "affected",
                  "version": "5.15.63",
                  "versionType": "semver"
                },
                {
                  "lessThan": "5.20",
                  "status": "affected",
                  "version": "5.19.4",
                  "versionType": "semver"
                }
              ]
            },
            {
              "defaultStatus": "affected",
              "product": "Linux",
              "programFiles": [
                "drivers/net/phy/phy_device.c"
              ],
              "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
              "vendor": "Linux",
              "versions": [
                {
                  "status": "affected",
                  "version": "6.0"
                },
                {
                  "lessThan": "6.0",
                  "status": "unaffected",
                  "version": "0",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "6.1.*",
                  "status": "unaffected",
                  "version": "6.1.168",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "6.6.*",
                  "status": "unaffected",
                  "version": "6.6.122",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "6.12.*",
                  "status": "unaffected",
                  "version": "6.12.24",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "6.13.*",
                  "status": "unaffected",
                  "version": "6.13.12",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "6.14.*",
                  "status": "unaffected",
                  "version": "6.14.3",
                  "versionType": "semver"
                },
                {
                  "lessThanOrEqual": "*",
                  "status": "unaffected",
                  "version": "6.15",
                  "versionType": "original_commit_for_fix"
                }
              ]
            }
          ],
          "cpeApplicability": [
            {
              "nodes": [
                {
                  "cpeMatch": [
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.1.168",
                      "versionStartIncluding": "6.0",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.6.122",
                      "versionStartIncluding": "6.0",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.12.24",
                      "versionStartIncluding": "6.0",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.13.12",
                      "versionStartIncluding": "6.0",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.14.3",
                      "versionStartIncluding": "6.0",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionEndExcluding": "6.15",
                      "versionStartIncluding": "6.0",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionStartIncluding": "5.15.63",
                      "vulnerable": true
                    },
                    {
                      "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                      "versionStartIncluding": "5.19.4",
                      "vulnerable": true
                    }
                  ],
                  "negate": false,
                  "operator": "OR"
                }
              ]
            }
          ],
          "descriptions": [
            {
              "lang": "en",
              "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnet: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY\n\nDSA has 2 kinds of drivers:\n\n1. Those who call dsa_switch_suspend() and dsa_switch_resume() from\n   their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz\n2. Those who don\u0027t: all others. The above methods should be optional.\n\nFor type 1, dsa_switch_suspend() calls dsa_user_suspend() -\u003e phylink_stop(),\nand dsa_switch_resume() calls dsa_user_resume() -\u003e phylink_start().\nThese seem good candidates for setting mac_managed_pm = true because\nthat is essentially its definition [1], but that does not seem to be the\nbiggest problem for now, and is not what this change focuses on.\n\nTalking strictly about the 2nd category of DSA drivers here (which\ndo not have MAC managed PM, meaning that for their attached PHYs,\nmdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full),\nI have noticed that the following warning from mdio_bus_phy_resume() is\ntriggered:\n\n\tWARN_ON(phydev-\u003estate != PHY_HALTED \u0026\u0026 phydev-\u003estate != PHY_READY \u0026\u0026\n\t\tphydev-\u003estate != PHY_UP);\n\nbecause the PHY state machine is running.\n\nIt\u0027s running as a result of a previous dsa_user_open() -\u003e ... -\u003e\nphylink_start() -\u003e phy_start() having been initiated by the user.\n\nThe previous mdio_bus_phy_suspend() was supposed to have called\nphy_stop_machine(), but it didn\u0027t. So this is why the PHY is in state\nPHY_NOLINK by the time mdio_bus_phy_resume() runs.\n\nmdio_bus_phy_suspend() did not call phy_stop_machine() because for\nphylink, the phydev-\u003eadjust_link function pointer is NULL. This seems a\ntechnicality introduced by commit fddd91016d16 (\"phylib: fix PAL state\nmachine restart on resume\"). That commit was written before phylink\nexisted, and was intended to avoid crashing with consumer drivers which\ndon\u0027t use the PHY state machine - phylink always does, when using a PHY.\nBut phylink itself has historically not been developed with\nsuspend/resume in mind, and apparently not tested too much in that\nscenario, allowing this bug to exist unnoticed for so long. Plus, prior\nto the WARN_ON(), it would have likely been invisible.\n\nThis issue is not in fact restricted to type 2 DSA drivers (according to\nthe above ad-hoc classification), but can be extrapolated to any MAC\ndriver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where\nthe issue was reported. Assuming mac_managed_pm is set correctly, a\nquick search indicates the following other drivers might be affected:\n\n$ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm\ndrivers/net/ethernet/atheros/ag71xx.c\ndrivers/net/ethernet/microchip/sparx5/sparx5_main.c\ndrivers/net/ethernet/microchip/lan966x/lan966x_main.c\ndrivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c\ndrivers/net/ethernet/freescale/fs_enet/fs_enet-main.c\ndrivers/net/ethernet/freescale/dpaa/dpaa_eth.c\ndrivers/net/ethernet/freescale/ucc_geth.c\ndrivers/net/ethernet/freescale/enetc/enetc_pf_common.c\ndrivers/net/ethernet/marvell/mvpp2/mvpp2_main.c\ndrivers/net/ethernet/marvell/mvneta.c\ndrivers/net/ethernet/marvell/prestera/prestera_main.c\ndrivers/net/ethernet/mediatek/mtk_eth_soc.c\ndrivers/net/ethernet/altera/altera_tse_main.c\ndrivers/net/ethernet/wangxun/txgbe/txgbe_phy.c\ndrivers/net/ethernet/meta/fbnic/fbnic_phylink.c\ndrivers/net/ethernet/tehuti/tn40_phy.c\ndrivers/net/ethernet/mscc/ocelot_net.c\n\nMake the existing conditions dependent on the PHY device having a\nphydev-\u003ephy_link_change() implementation equal to the default\nphy_link_change() provided by phylib. Otherwise, we implicitly know that\nthe phydev has the phylink-provided phylink_phy_change() callback, and\nwhen phylink is used, the PHY state machine always needs to be stopped/\nstarted on the suspend/resume path. The code is structured as such that\nif phydev-\u003ephy_link_change() is absent, it is a matter of time until the\nkernel will crash - no need to further complicate the test.\n\nThus, for the situation where the PM is not managed b\n---truncated---"
            }
          ],
          "providerMetadata": {
            "dateUpdated": "2026-05-23T15:58:37.700Z",
            "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "shortName": "Linux"
          },
          "references": [
            {
              "url": "https://git.kernel.org/stable/c/17eef1e44883845b9567afc893dc41e004c08d65"
            },
            {
              "url": "https://git.kernel.org/stable/c/043aa41c43f8cb9cce75367ea07895ce68b5abb0"
            },
            {
              "url": "https://git.kernel.org/stable/c/a6ed6f8ec81b8ca7100dcd9e62bdbc0dff1b2259"
            },
            {
              "url": "https://git.kernel.org/stable/c/54e5d00a8de6c13f6c01a94ed48025e882cd15f7"
            },
            {
              "url": "https://git.kernel.org/stable/c/bd4037d51d3f6667636a1383e78e48a5b7b60755"
            },
            {
              "url": "https://git.kernel.org/stable/c/fc75ea20ffb452652f0d4033f38fe88d7cfdae35"
            }
          ],
          "title": "net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY",
          "x_generator": {
            "engine": "bippy-1.2.0"
          }
        }
      },
      "cveMetadata": {
        "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "assignerShortName": "Linux",
        "cveId": "CVE-2025-37945",
        "datePublished": "2025-05-20T15:58:20.841Z",
        "dateReserved": "2025-04-16T04:51:23.972Z",
        "dateUpdated": "2026-11-10T12:36:04.295Z",
        "state": "PUBLISHED"
      },
      "dataType": "CVE_RECORD",
      "dataVersion": "5.2"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline

Sightings and recorded dates, grouped by day · UTC

JSON
How durations are calculated

Following the VTEM framework (Black Hat USA 2015), time to patch starts when the vendor or a coordinator was informed, total time to patch at discovery, and disclosure to patch at public disclosure; vendor response time runs from the report to its acknowledgement. Time to exploit and time unpatched start at the earliest discovery or report, falling back to public disclosure. Unpatched time ends at the first recorded patch, or the calculation time when no patch is recorded. Exploitation to patch shows the interval between those two events; a published proof of concept is a public exploit, not exploitation.

Each result shows its source dates. A negative interval means the end event came first; when date-only inputs leave the order open, the result says so. Date-only inputs are approximate. The earliest evidence wins: KEV report dates and sightings are labelled as such. Records describing another vulnerability are listed but never calculated from, and a PoC alone does not establish exploitation. Missing patch evidence does not prove that no patch exists. Filters below change the event list only.

Events included in the timeline

Loading timeline…


    Loading…

    Loading…

    Loading…

    Related by attack behaviour

    Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.