Refine your search
51 vulnerabilities found for Apache Camel by Apache Software Foundation
CVE-2026-78329 (GCVE-0-2026-78329)
Vulnerability from cvelistv5
Published
2026-08-24 16:22
Modified
2026-08-26 18:47
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-20 - Improper input validation
Summary
Improper input validation vulnerability in Apache Camel Undertow component.
This issue affects Apache Camel: from 4.11.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.
UndertowEndpoint defaulted its headerFilterStrategy field to the base HttpHeaderFilterStrategy and pushed that instance into the UndertowHttpBinding it creates lazily, overwriting the UndertowHeaderFilterStrategy that DefaultUndertowHttpBinding installs in its own constructor. Unless a deployment supplied a custom binding or an explicit headerFilterStrategy, the undertow-specific filtering therefore never executed on endpoint-configured routes: the strategy object was constructed and immediately replaced before it could be consulted. The consequence is that the legacy websocket. Exchange-header prefix was not filtered at the undertow transport boundary in either direction, so an undertow HTTP consumer mapped inbound wire headers of that form onto the Exchange, where an undertow WebSocket producer reads them as dispatch directives and can be made to deliver to a peer other than the one the route selected; and header names that undertow itself does not accept were mapped onto the Exchange rather than being skipped. Rest DSL consumers were never affected, because UndertowComponent assigns UndertowRestHeaderFilterStrategy explicitly, which extends the undertow strategy. This is not a regression of CVE-2025-30177: the base HttpHeaderFilterStrategy configures the inbound Camel-prefix filter itself, so the protection introduced by that advisory continued to work through the base class and was never lost. What the change did was leave the undertow strategy orphaned on the endpoint path, with the effect that two subsequent corrections written into it - one skipping header names undertow rejects, one filtering the legacy websocket. prefix in both directions - were applied to a class the endpoint no longer used and never took effect in the releases that shipped them.
Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, configure the strategy explicitly rather than relying on the default, for example by binding an UndertowHeaderFilterStrategy in the registry and referencing it on the endpoint as undertow:http://0.0.0.0:8080/foo?headerFilterStrategy=#myStrategy, and additionally strip the dispatch headers at the trust boundary with removeHeaders(“websocket.*”). Note a residual limitation that upgrading does not remove: the undertow component deliberately keeps the websocket. values as part of its externally visible API contract, and UndertowProducer reads them with in.getHeader, which does not consult a HeaderFilterStrategy at all. The restored filtering is therefore defence in depth at the undertow transport boundary only. A route that carries an untrusted message from a non-undertow consumer into an undertow producer is not protected by this fix and must strip those headers itself.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.11.0 ≤ Version: 4.15.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-78329",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-08-26T18:47:09.326728Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-08-26T18:47:32.653Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-undertow",
"packageURL": "pkg:maven/org.apache.camel/camel-undertow",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.14.9",
"status": "affected",
"version": "4.11.0",
"versionType": "semver"
},
{
"lessThan": "4.18.4",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThan": "4.22.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Andrea Cosentino from Apache Software Foundation"
},
{
"lang": "en",
"type": "finder",
"value": "Barak Srour from Apiiro"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Andrea Cosentino from Apache Software Foundation"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eImproper input validation vulnerability in Apache Camel Undertow component.\u003c/p\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.11.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.\u003c/p\u003e\u003cp\u003eUndertowEndpoint defaulted its headerFilterStrategy field to the base HttpHeaderFilterStrategy and pushed that instance into the UndertowHttpBinding it creates lazily, overwriting the UndertowHeaderFilterStrategy that DefaultUndertowHttpBinding installs in its own constructor. Unless a deployment supplied a custom binding or an explicit headerFilterStrategy, the undertow-specific filtering therefore never executed on endpoint-configured routes: the strategy object was constructed and immediately replaced before it could be consulted. The consequence is that the legacy websocket. Exchange-header prefix was not filtered at the undertow transport boundary in either direction, so an undertow HTTP consumer mapped inbound wire headers of that form onto the Exchange, where an undertow WebSocket producer reads them as dispatch directives and can be made to deliver to a peer other than the one the route selected; and header names that undertow itself does not accept were mapped onto the Exchange rather than being skipped. Rest DSL consumers were never affected, because UndertowComponent assigns UndertowRestHeaderFilterStrategy explicitly, which extends the undertow strategy. This is not a regression of CVE-2025-30177: the base HttpHeaderFilterStrategy configures the inbound Camel-prefix filter itself, so the protection introduced by that advisory continued to work through the base class and was never lost. What the change did was leave the undertow strategy orphaned on the endpoint path, with the effect that two subsequent corrections written into it - one skipping header names undertow rejects, one filtering the legacy websocket. prefix in both directions - were applied to a class the endpoint no longer used and never took effect in the releases that shipped them.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, configure the strategy explicitly rather than relying on the default, for example by binding an UndertowHeaderFilterStrategy in the registry and referencing it on the endpoint as undertow:http://0.0.0.0:8080/foo?headerFilterStrategy=#myStrategy, and additionally strip the dispatch headers at the trust boundary with removeHeaders(\u201cwebsocket.*\u201d). Note a residual limitation that upgrading does not remove: the undertow component deliberately keeps the websocket. values as part of its externally visible API contract, and UndertowProducer reads them with in.getHeader, which does not consult a HeaderFilterStrategy at all. The restored filtering is therefore defence in depth at the undertow transport boundary only. A route that carries an untrusted message from a non-undertow consumer into an undertow producer is not protected by this fix and must strip those headers itself.\u003c/p\u003e"
}
],
"value": "Improper input validation vulnerability in Apache Camel Undertow component.\n\n\n\nThis issue affects Apache Camel: from 4.11.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.\n\n\n\nUndertowEndpoint defaulted its headerFilterStrategy field to the base HttpHeaderFilterStrategy and pushed that instance into the UndertowHttpBinding it creates lazily, overwriting the UndertowHeaderFilterStrategy that DefaultUndertowHttpBinding installs in its own constructor. Unless a deployment supplied a custom binding or an explicit headerFilterStrategy, the undertow-specific filtering therefore never executed on endpoint-configured routes: the strategy object was constructed and immediately replaced before it could be consulted. The consequence is that the legacy websocket. Exchange-header prefix was not filtered at the undertow transport boundary in either direction, so an undertow HTTP consumer mapped inbound wire headers of that form onto the Exchange, where an undertow WebSocket producer reads them as dispatch directives and can be made to deliver to a peer other than the one the route selected; and header names that undertow itself does not accept were mapped onto the Exchange rather than being skipped. Rest DSL consumers were never affected, because UndertowComponent assigns UndertowRestHeaderFilterStrategy explicitly, which extends the undertow strategy. This is not a regression of CVE-2025-30177: the base HttpHeaderFilterStrategy configures the inbound Camel-prefix filter itself, so the protection introduced by that advisory continued to work through the base class and was never lost. What the change did was leave the undertow strategy orphaned on the endpoint path, with the effect that two subsequent corrections written into it - one skipping header names undertow rejects, one filtering the legacy websocket. prefix in both directions - were applied to a class the endpoint no longer used and never took effect in the releases that shipped them.\n\n\n\nUsers are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, configure the strategy explicitly rather than relying on the default, for example by binding an UndertowHeaderFilterStrategy in the registry and referencing it on the endpoint as undertow:http://0.0.0.0:8080/foo?headerFilterStrategy=#myStrategy, and additionally strip the dispatch headers at the trust boundary with removeHeaders(\u201cwebsocket.*\u201d). Note a residual limitation that upgrading does not remove: the undertow component deliberately keeps the websocket. values as part of its externally visible API contract, and UndertowProducer reads them with in.getHeader, which does not consult a HeaderFilterStrategy at all. The restored filtering is therefore defence in depth at the undertow transport boundary only. A route that carries an untrusted message from a non-undertow consumer into an undertow producer is not protected by this fix and must strip those headers itself."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual severity rating"
},
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-20",
"description": "CWE-20 Improper input validation",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-24T16:22:17.528Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-78329.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-Undertow: the endpoint discarded the undertow-specific header filter strategy in favour of the base HTTP one, so the undertow filtering never ran on endpoint-configured routes",
"x_generator": {
"engine": "Vulnogram 1.0.3"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-78329",
"datePublished": "2026-08-24T16:22:17.528Z",
"dateReserved": "2026-08-24T09:47:36.708Z",
"dateUpdated": "2026-08-26T18:47:32.653Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-71300 (GCVE-0-2026-71300)
Vulnerability from cvelistv5
Published
2026-08-24 16:21
Modified
2026-08-25 19:39
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-20 - Improper input validation
Summary
Improper input validation vulnerability in Apache Camel Atmosphere Websocket component.
This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.
The camel-atmosphere-websocket producer selects which connected WebSocket peers a message is delivered to through Exchange headers, and the string values of those headers sat outside the Camel namespace: websocket.connectionKey and websocket.connectionKey.list, along with websocket.sendToAll, websocket.eventType and websocket.errorType. WebsocketEndpoint extends ServletEndpoint and so inherits HttpHeaderFilterStrategy, which filters only the Camel and camel prefixes; the dotted names therefore fell outside the filtered namespace and were admitted in both directions by every HTTP-family consumer. In a route bridging an HTTP consumer into an atmosphere-websocket producer, an external sender could supply the list header and take over the producer's dispatch decision. WebsocketProducer.process tests the list header before the single-key header, so an injected value discarded the recipient the route had selected: a notification intended for one connected client could be suppressed, or delivered instead to a different client whose connection key the sender knows. The header need not be a query parameter and need not be supplied as a list literally - Camel's HTTP binding promotes a repeated header name, and a bracketed value, to a List when mapping onto the Exchange - so an ordinary inbound HTTP header is sufficient to reach the list-valued branch. This is distinct from CVE-2026-55993, which concerns the consumer-side query-parameter path in the same component. The behaviour dates back to the introduction of these constants, first released in 2.17.0, and was unchanged until this fix.
Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, strip the dispatch headers at the trust boundary before the producer, for example with removeHeaders(“websocket.*”) placed between the HTTP consumer and the atmosphere-websocket producer. Note that the fix renames the header string values into the Camel namespace, which is a breaking change for routes that set them by literal string: routes referencing the WebsocketConstants fields symbolically are unaffected, and the change is documented in the upgrade guides. As defence in depth, do not bridge an untrusted HTTP consumer directly into a WebSocket producer whose dispatch is header-driven without stripping the dispatch namespace first.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.0.0 ≤ Version: 4.15.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-71300",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-08-25T19:39:35.729442Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-08-25T19:39:50.077Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-atmosphere-websocket",
"packageURL": "pkg:maven/org.apache.camel/camel-atmosphere-websocket",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.14.9",
"status": "affected",
"version": "4.0.0",
"versionType": "semver"
},
{
"lessThan": "4.18.4",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThan": "4.22.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Barak Srour from Apiiro"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Andrea Cosentino"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eImproper input validation vulnerability in Apache Camel Atmosphere Websocket component.\u003c/p\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.\u003c/p\u003e\u003cp\u003eThe camel-atmosphere-websocket producer selects which connected WebSocket peers a message is delivered to through Exchange headers, and the string values of those headers sat outside the Camel namespace: websocket.connectionKey and websocket.connectionKey.list, along with websocket.sendToAll, websocket.eventType and websocket.errorType. WebsocketEndpoint extends ServletEndpoint and so inherits HttpHeaderFilterStrategy, which filters only the Camel and camel prefixes; the dotted names therefore fell outside the filtered namespace and were admitted in both directions by every HTTP-family consumer. In a route bridging an HTTP consumer into an atmosphere-websocket producer, an external sender could supply the list header and take over the producer\u0027s dispatch decision. WebsocketProducer.process tests the list header before the single-key header, so an injected value discarded the recipient the route had selected: a notification intended for one connected client could be suppressed, or delivered instead to a different client whose connection key the sender knows. The header need not be a query parameter and need not be supplied as a list literally - Camel\u0027s HTTP binding promotes a repeated header name, and a bracketed value, to a List when mapping onto the Exchange - so an ordinary inbound HTTP header is sufficient to reach the list-valued branch. This is distinct from CVE-2026-55993, which concerns the consumer-side query-parameter path in the same component. The behaviour dates back to the introduction of these constants, first released in 2.17.0, and was unchanged until this fix.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, strip the dispatch headers at the trust boundary before the producer, for example with removeHeaders(\u201cwebsocket.*\u201d) placed between the HTTP consumer and the atmosphere-websocket producer. Note that the fix renames the header string values into the Camel namespace, which is a breaking change for routes that set them by literal string: routes referencing the WebsocketConstants fields symbolically are unaffected, and the change is documented in the upgrade guides. As defence in depth, do not bridge an untrusted HTTP consumer directly into a WebSocket producer whose dispatch is header-driven without stripping the dispatch namespace first.\u003c/p\u003e"
}
],
"value": "Improper input validation vulnerability in Apache Camel Atmosphere Websocket component.\n\n\n\nThis issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.\n\n\n\nThe camel-atmosphere-websocket producer selects which connected WebSocket peers a message is delivered to through Exchange headers, and the string values of those headers sat outside the Camel namespace: websocket.connectionKey and websocket.connectionKey.list, along with websocket.sendToAll, websocket.eventType and websocket.errorType. WebsocketEndpoint extends ServletEndpoint and so inherits HttpHeaderFilterStrategy, which filters only the Camel and camel prefixes; the dotted names therefore fell outside the filtered namespace and were admitted in both directions by every HTTP-family consumer. In a route bridging an HTTP consumer into an atmosphere-websocket producer, an external sender could supply the list header and take over the producer\u0027s dispatch decision. WebsocketProducer.process tests the list header before the single-key header, so an injected value discarded the recipient the route had selected: a notification intended for one connected client could be suppressed, or delivered instead to a different client whose connection key the sender knows. The header need not be a query parameter and need not be supplied as a list literally - Camel\u0027s HTTP binding promotes a repeated header name, and a bracketed value, to a List when mapping onto the Exchange - so an ordinary inbound HTTP header is sufficient to reach the list-valued branch. This is distinct from CVE-2026-55993, which concerns the consumer-side query-parameter path in the same component. The behaviour dates back to the introduction of these constants, first released in 2.17.0, and was unchanged until this fix.\n\n\n\nUsers are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, strip the dispatch headers at the trust boundary before the producer, for example with removeHeaders(\u201cwebsocket.*\u201d) placed between the HTTP consumer and the atmosphere-websocket producer. Note that the fix renames the header string values into the Camel namespace, which is a breaking change for routes that set them by literal string: routes referencing the WebsocketConstants fields symbolically are unaffected, and the change is documented in the upgrade guides. As defence in depth, do not bridge an untrusted HTTP consumer directly into a WebSocket producer whose dispatch is header-driven without stripping the dispatch namespace first."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual severity rating"
},
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-20",
"description": "CWE-20 Improper input validation",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-24T16:21:17.218Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-71300.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-Atmosphere-Websocket: WebSocket dispatch header injection",
"x_generator": {
"engine": "Vulnogram 1.0.3"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-71300",
"datePublished": "2026-08-24T16:21:17.218Z",
"dateReserved": "2026-08-05T17:09:08.388Z",
"dateUpdated": "2026-08-25T19:39:50.077Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-63621 (GCVE-0-2026-63621)
Vulnerability from cvelistv5
Published
2026-08-24 16:17
Modified
2026-08-25 19:39
Severity ?
VLAI Severity ?
EPSS score ?
CWE
Summary
Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel Knative component
The Knative consumer in camel-knative maps inbound CloudEvent attributes onto Camel message headers. In binary content mode the HTTP-header path filters Camel-internal headers through KnativeHttpHeaderFilterStrategy, but in structured content mode (Content-Type application/cloudevents+json) the CloudEvent extension fields are read directly from the JSON body and every extension key is copied into the Exchange headers without applying any HeaderFilterStrategy (CloudEventProcessors, spec versions 1.0, 1.0.1 and 1.0.2). As a result, an unauthenticated attacker can inject Camel-internal headers (e.g. CamelHttpUri, CamelHttpPath, CamelFileName) via a structured-mode CloudEvent request, matched case-insensitively against Camel's header map. When a route forwards messages from a Knative consumer to a header-driven component such as camel-http or camel-file, the injected headers override configured values, enabling server-side request forgery (SSRF), path traversal or message-dispatch redirection depending on the route. This is an incomplete fix of the inbound header filtering previously added for the binary content-mode path, and is the same pattern addressed in camel-cxf/camel-knative (CVE-2026-47323), camel-undertow (CVE-2025-30177), the broader incoming-header filter (CVE-2025-27636 and CVE-2025-29891), and the non-HTTP strategies (CVE-2026-40453).
This issue affects Apache Camel: from 3.15.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.4. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. The non-LTS releases 4.15.0 through 4.17.0 and 4.19.0 through 4.21.0 are affected but do not receive a maintenance fix; users on those versions should upgrade to 4.18.4 or 4.22.0.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 3.15.0 ≤ Version: 4.15.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "NONE",
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "LOW",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-63621",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-08-25T19:38:54.307849Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-08-25T19:39:09.091Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-knative",
"packageURL": "pkg:maven/org.apache.camel/camel-knative",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.14.9",
"status": "affected",
"version": "3.15.0",
"versionType": "semver"
},
{
"lessThan": "4.18.4",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThan": "4.21.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Andrea Cosentino"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Andrea Cosentino"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eImproper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027) vulnerability in Apache Camel Knative component\u003c/p\u003eThe Knative consumer in camel-knative maps inbound CloudEvent attributes onto Camel message headers. In binary content mode the HTTP-header path filters Camel-internal headers through KnativeHttpHeaderFilterStrategy, but in structured content mode (Content-Type application/cloudevents+json) the CloudEvent extension fields are read directly from the JSON body and every extension key is copied into the Exchange headers without applying any HeaderFilterStrategy (CloudEventProcessors, spec versions 1.0, 1.0.1 and 1.0.2). As a result, an unauthenticated attacker can inject Camel-internal headers (e.g. CamelHttpUri, CamelHttpPath, CamelFileName) via a structured-mode CloudEvent request, matched case-insensitively against Camel\u0027s header map. When a route forwards messages from a Knative consumer to a header-driven component such as camel-http or camel-file, the injected headers override configured values, enabling server-side request forgery (SSRF), path traversal or message-dispatch redirection depending on the route. This is an incomplete fix of the inbound header filtering previously added for the binary content-mode path, and is the same pattern addressed in camel-cxf/camel-knative (CVE-2026-47323), camel-undertow (CVE-2025-30177), the broader incoming-header filter (CVE-2025-27636 and CVE-2025-29891), and the non-HTTP strategies (CVE-2026-40453).\u003cbr\u003e\u003cp\u003eThis issue affects Apache Camel: from 3.15.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.21.0.\u003c/p\u003eUsers are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.4. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. The non-LTS releases 4.15.0 through 4.17.0 and 4.19.0 through 4.21.0 are affected but do not receive a maintenance fix; users on those versions should upgrade to 4.18.4 or 4.22.0."
}
],
"value": "Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027) vulnerability in Apache Camel Knative component\n\nThe Knative consumer in camel-knative maps inbound CloudEvent attributes onto Camel message headers. In binary content mode the HTTP-header path filters Camel-internal headers through KnativeHttpHeaderFilterStrategy, but in structured content mode (Content-Type application/cloudevents+json) the CloudEvent extension fields are read directly from the JSON body and every extension key is copied into the Exchange headers without applying any HeaderFilterStrategy (CloudEventProcessors, spec versions 1.0, 1.0.1 and 1.0.2). As a result, an unauthenticated attacker can inject Camel-internal headers (e.g. CamelHttpUri, CamelHttpPath, CamelFileName) via a structured-mode CloudEvent request, matched case-insensitively against Camel\u0027s header map. When a route forwards messages from a Knative consumer to a header-driven component such as camel-http or camel-file, the injected headers override configured values, enabling server-side request forgery (SSRF), path traversal or message-dispatch redirection depending on the route. This is an incomplete fix of the inbound header filtering previously added for the binary content-mode path, and is the same pattern addressed in camel-cxf/camel-knative (CVE-2026-47323), camel-undertow (CVE-2025-30177), the broader incoming-header filter (CVE-2025-27636 and CVE-2025-29891), and the non-HTTP strategies (CVE-2026-40453).\n\n\nThis issue affects Apache Camel: from 3.15.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.21.0.\n\nUsers are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.4. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. The non-LTS releases 4.15.0 through 4.17.0 and 4.19.0 through 4.21.0 are affected but do not receive a maintenance fix; users on those versions should upgrade to 4.18.4 or 4.22.0."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual description of severity"
},
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-20",
"description": "CWE-20 Improper Input Validation",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-74",
"description": "CWE-74 Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-24T16:17:26.499Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-63621.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-Knative: CloudEvent extension fields received in structured content mode were mapped onto message headers without applying any header filter strategy",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-63621",
"datePublished": "2026-08-24T16:17:26.499Z",
"dateReserved": "2026-07-17T11:36:00.286Z",
"dateUpdated": "2026-08-25T19:39:09.091Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-66908 (GCVE-0-2026-66908)
Vulnerability from cvelistv5
Published
2026-08-24 16:14
Modified
2026-08-25 19:38
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-287 - Improper Authentication
Summary
Improper Authentication vulnerability in Apache Camel Platform HTTP Main component.
This issue affects Apache Camel: from 4.8.0 before 4.22.0.
The camel-main embedded HTTP server can protect its endpoints with JWT authentication, configured through authenticationEnabled together with the JWT keystore properties. JWTAuthenticationConfigurer.buildJwtOptions returned null when neither jwtIssuer nor jwtAudience was configured, and the caller then skipped the JWTAuthOptions.setJWTOptions call entirely, so the Vert.x JWTAuth instance was built from the keystore alone. The result was that inbound tokens were checked only for signature and expiry: the iss and aud claims were not validated at all. Nothing signalled this - the server started normally and reported no warning - so a deployment configured the documented way silently enforced less than the operator believed it had enabled, and the component documentation itself presented signature and expiry checking as the default with issuer and audience as an optional extra. Both the application server and the management server were affected, because the omission was in each of the two configureAuthentication paths. Any unexpired token signed by any key the configured keystore trusts was therefore accepted, regardless of which issuer minted it or which audience it was intended for. How far that reaches depends on the trust set of the keystore: where the signing key belongs to a shared or multi-tenant identity provider, a token legitimately issued for an entirely different audience is accepted, while a keystore holding a dedicated signer narrows it to reuse of tokens minted for other services within the same trust domain. The jwtIssuer and jwtAudience options did not exist before 4.21.0, so on earlier releases there was no supported way to have these claims enforced at all.
Users are recommended to upgrade to version 4.22.0, which fixes the issue. From 4.22.0 the server refuses to start when a JWT keystore is configured but neither jwtIssuer nor jwtAudience is set, naming the properties involved, and a deployment that genuinely wants signature and expiry validation only must say so explicitly with the new jwtAllowMissingIssuerAndAudience option, which defaults to false. This behaviour is fixed only on 4.22.0. The 4.14.9 and 4.18.4 releases do not change the default: they add the jwtIssuer and jwtAudience options so that operators on those maintenance lines can enforce the claims by configuration, and an installation that upgrades to 4.14.9 or 4.18.4 without also setting at least one of those two properties is still accepting any unexpired token signed by a trusted key. Users on 4.14.x or 4.18.x should therefore upgrade to 4.14.9 or 4.18.4 and then set jwtIssuer, jwtAudience, or both. Releases from 4.8.0 up to and including 4.21.x offer no way to enforce these claims and should be moved to a version that does. Independently of version, restrict the JWT keystore to the smallest possible trust set - ideally a signer dedicated to this service rather than a shared identity-provider key - and where a gateway already validates issuer and audience in front of the server, ensure it cannot be bypassed.
Notes:
The JIRA ticket: https://issues.apache.org/jira/browse/CAMEL-24281 refers to the various commits that resolved the issue, and has more details.
The fail-closed guard could not be backported. The jwtIssuer and jwtAudience options were themselves only introduced in 4.21.0 by CAMEL-23525, so on camel-4.18.x and camel-4.14.x there was nothing an operator could set to satisfy the requirement and the guard would have broken every JWT deployment on those branches with no remedy available.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.8.0 ≤ |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2026-08-24T19:13:41.074Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/08/24/12"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "NONE",
"baseScore": 7.5,
"baseSeverity": "HIGH",
"confidentialityImpact": "NONE",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-66908",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-08-25T19:38:05.072472Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-08-25T19:38:28.088Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-platform-http-main",
"packageURL": "pkg:maven/org.apache.camel/camel-platform-http-main",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.22.0",
"status": "affected",
"version": "4.8.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "n0mi1k"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Andrea Cosentino"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eImproper Authentication vulnerability in Apache Camel Platform HTTP Main component.\u003c/p\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.8.0 before 4.22.0.\u003c/p\u003e\u003cp\u003eThe camel-main embedded HTTP server can protect its endpoints with JWT authentication, configured through authenticationEnabled together with the JWT keystore properties. JWTAuthenticationConfigurer.buildJwtOptions returned null when neither jwtIssuer nor jwtAudience was configured, and the caller then skipped the JWTAuthOptions.setJWTOptions call entirely, so the Vert.x JWTAuth instance was built from the keystore alone. The result was that inbound tokens were checked only for signature and expiry: the iss and aud claims were not validated at all. Nothing signalled this - the server started normally and reported no warning - so a deployment configured the documented way silently enforced less than the operator believed it had enabled, and the component documentation itself presented signature and expiry checking as the default with issuer and audience as an optional extra. Both the application server and the management server were affected, because the omission was in each of the two configureAuthentication paths. Any unexpired token signed by any key the configured keystore trusts was therefore accepted, regardless of which issuer minted it or which audience it was intended for. How far that reaches depends on the trust set of the keystore: where the signing key belongs to a shared or multi-tenant identity provider, a token legitimately issued for an entirely different audience is accepted, while a keystore holding a dedicated signer narrows it to reuse of tokens minted for other services within the same trust domain. The jwtIssuer and jwtAudience options did not exist before 4.21.0, so on earlier releases there was no supported way to have these claims enforced at all.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.22.0, which fixes the issue. From 4.22.0 the server refuses to start when a JWT keystore is configured but neither jwtIssuer nor jwtAudience is set, naming the properties involved, and a deployment that genuinely wants signature and expiry validation only must say so explicitly with the new jwtAllowMissingIssuerAndAudience option, which defaults to false. This behaviour is fixed only on 4.22.0. The 4.14.9 and 4.18.4 releases do not change the default: they add the jwtIssuer and jwtAudience options so that operators on those maintenance lines can enforce the claims by configuration, and an installation that upgrades to 4.14.9 or 4.18.4 without also setting at least one of those two properties is still accepting any unexpired token signed by a trusted key. Users on 4.14.x or 4.18.x should therefore upgrade to 4.14.9 or 4.18.4 and then set jwtIssuer, jwtAudience, or both. Releases from 4.8.0 up to and including 4.21.x offer no way to enforce these claims and should be moved to a version that does. Independently of version, restrict the JWT keystore to the smallest possible trust set - ideally a signer dedicated to this service rather than a shared identity-provider key - and where a gateway already validates issuer and audience in front of the server, ensure it cannot be bypassed.\u003c/p\u003e\u003cp\u003eNotes:\u003c/p\u003e\u003cp\u003eThe JIRA ticket:\u0026nbsp;\u003ca href=\"https://issues.apache.org/jira/browse/CAMEL-24281\" rel=\"noopener nofollow noreferrer\"\u003ehttps://issues.apache.org/jira/browse/CAMEL-24281\u003c/a\u003e\u0026nbsp;refers to the various commits that resolved the issue, and has more details.\u003c/p\u003e\u003cp\u003eThe fail-closed guard could not be backported. The jwtIssuer and jwtAudience options were themselves only introduced in 4.21.0 by CAMEL-23525, so on camel-4.18.x and camel-4.14.x there was nothing an operator could set to satisfy the requirement and the guard would have broken every JWT deployment on those branches with no remedy available.\u0026nbsp;\u003c/p\u003e"
}
],
"value": "Improper Authentication vulnerability in Apache Camel Platform HTTP Main component.\n\n\n\nThis issue affects Apache Camel: from 4.8.0 before 4.22.0.\n\n\n\nThe camel-main embedded HTTP server can protect its endpoints with JWT authentication, configured through authenticationEnabled together with the JWT keystore properties. JWTAuthenticationConfigurer.buildJwtOptions returned null when neither jwtIssuer nor jwtAudience was configured, and the caller then skipped the JWTAuthOptions.setJWTOptions call entirely, so the Vert.x JWTAuth instance was built from the keystore alone. The result was that inbound tokens were checked only for signature and expiry: the iss and aud claims were not validated at all. Nothing signalled this - the server started normally and reported no warning - so a deployment configured the documented way silently enforced less than the operator believed it had enabled, and the component documentation itself presented signature and expiry checking as the default with issuer and audience as an optional extra. Both the application server and the management server were affected, because the omission was in each of the two configureAuthentication paths. Any unexpired token signed by any key the configured keystore trusts was therefore accepted, regardless of which issuer minted it or which audience it was intended for. How far that reaches depends on the trust set of the keystore: where the signing key belongs to a shared or multi-tenant identity provider, a token legitimately issued for an entirely different audience is accepted, while a keystore holding a dedicated signer narrows it to reuse of tokens minted for other services within the same trust domain. The jwtIssuer and jwtAudience options did not exist before 4.21.0, so on earlier releases there was no supported way to have these claims enforced at all.\n\n\n\nUsers are recommended to upgrade to version 4.22.0, which fixes the issue. From 4.22.0 the server refuses to start when a JWT keystore is configured but neither jwtIssuer nor jwtAudience is set, naming the properties involved, and a deployment that genuinely wants signature and expiry validation only must say so explicitly with the new jwtAllowMissingIssuerAndAudience option, which defaults to false. This behaviour is fixed only on 4.22.0. The 4.14.9 and 4.18.4 releases do not change the default: they add the jwtIssuer and jwtAudience options so that operators on those maintenance lines can enforce the claims by configuration, and an installation that upgrades to 4.14.9 or 4.18.4 without also setting at least one of those two properties is still accepting any unexpired token signed by a trusted key. Users on 4.14.x or 4.18.x should therefore upgrade to 4.14.9 or 4.18.4 and then set jwtIssuer, jwtAudience, or both. Releases from 4.8.0 up to and including 4.21.x offer no way to enforce these claims and should be moved to a version that does. Independently of version, restrict the JWT keystore to the smallest possible trust set - ideally a signer dedicated to this service rather than a shared identity-provider key - and where a gateway already validates issuer and audience in front of the server, ensure it cannot be bypassed.\n\n\n\nNotes:\n\n\n\nThe JIRA ticket:\u00a0 https://issues.apache.org/jira/browse/CAMEL-24281 \u00a0refers to the various commits that resolved the issue, and has more details.\n\n\n\nThe fail-closed guard could not be backported. The jwtIssuer and jwtAudience options were themselves only introduced in 4.21.0 by CAMEL-23525, so on camel-4.18.x and camel-4.14.x there was nothing an operator could set to satisfy the requirement and the guard would have broken every JWT deployment on those branches with no remedy available."
}
],
"metrics": [
{
"other": {
"content": {
"text": "important"
},
"type": "Textual severity rating"
},
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-287",
"description": "CWE-287 Improper Authentication",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-24T16:14:18.202Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-66908.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-platform-http-main: when JWT authentication was configured with a keystore but no issuer or audience, the iss and aud claims were never validated, so any unexpired token signed by a trusted key was accepted",
"x_generator": {
"engine": "Vulnogram 1.0.3"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-66908",
"datePublished": "2026-08-24T16:14:18.202Z",
"dateReserved": "2026-07-28T09:33:04.800Z",
"dateUpdated": "2026-08-25T19:38:28.088Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-66907 (GCVE-0-2026-66907)
Vulnerability from cvelistv5
Published
2026-08-24 16:13
Modified
2026-08-25 19:37
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-23 - Relative path traversal
Summary
Relative path traversal vulnerability in Apache Camel Google Storage component.
This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.
The camel-google-storage consumer downloads Google Cloud Storage objects to the local filesystem when the downloadFileName option is set. That option is documented as a folder or a filename, and when its value contains no expression token the consumer builds the local destination by appending the object name to it: evaluateFileExpression sets the Exchange file-name header to the remote object name and evaluates downloadFileName + "/${file:name}". The ${file:name} token returns the file-name header verbatim, unlike ${file:onlyname}, which applies FileUtil.stripPath to it. The resulting string was passed directly to new File(result) and blob.downloadTo(file.toPath()) with no lexical normalization and no check that the destination stayed inside the configured directory. The object name is not route-controlled data: the consumer lists the bucket, iterates every returned blob and creates one exchange per object from blob.getBlobId().getName() verbatim, and the filter option that could restrict those names is not applied at all unless it has been explicitly set. Google Cloud Storage object names are opaque UTF-8 keys that the service stores and lists exactly as written, with no server-side canonicalization, and a forward slash is only a display convention for pseudo-directories, so a key containing parent-directory segments survives round-tripping intact. An object name containing such segments therefore resolved to a location outside the configured downloadFileName directory, letting anyone able to influence the names present in the consumed bucket cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. The downloadFileName option is an ordinary consumer parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. The defect is consumer-only; the producer has no download-to-file sink. Camel's other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp, camel-azure-files and the Azure Storage download paths - already constrained their local downloads to the configured directory using a path-segment boundary check; camel-google-storage was the remaining object-store download sink not covered by that work.
Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, set the filter option to a regular expression that accepts only simple single-segment object names, so that any name carrying a path separator or a parent-directory segment is excluded before an exchange is created; note that no filtering whatsoever is applied when the option is left unset, and that the expression is matched against the whole object name. Alternatively, give downloadFileName an explicit expression that does not carry the remote path through, for example one built on ${file:onlyname} rather than the implicit ${file:name}, keeping in mind that a downloadFileName containing an expression is treated as route-author-controlled and is not covered by the containment check added in the fix. As defence in depth, treat the object names in any externally writable bucket as untrusted input and do not derive local filesystem paths from them.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.0.0 ≤ Version: 4.15.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2026-08-24T19:13:39.604Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/08/24/11"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "NONE",
"baseScore": 7.5,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-66907",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-08-25T19:37:29.965837Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-08-25T19:37:45.023Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-google-storage",
"packageURL": "pkg:maven/org.apache.camel/camel-google-storage",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.14.9",
"status": "affected",
"version": "4.0.0",
"versionType": "semver"
},
{
"lessThan": "4.18.4",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThan": "4.22.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "n0mi1k"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Andrea Cosentino"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eRelative path traversal vulnerability in Apache Camel Google Storage component.\u003c/p\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.\u003c/p\u003e\u003cp\u003eThe camel-google-storage consumer downloads Google Cloud Storage objects to the local filesystem when the downloadFileName option is set. That option is documented as a folder or a filename, and when its value contains no expression token the consumer builds the local destination by appending the object name to it: evaluateFileExpression sets the Exchange file-name header to the remote object name and evaluates downloadFileName + \"/${file:name}\". The ${file:name} token returns the file-name header verbatim, unlike ${file:onlyname}, which applies FileUtil.stripPath to it. The resulting string was passed directly to new File(result) and blob.downloadTo(file.toPath()) with no lexical normalization and no check that the destination stayed inside the configured directory. The object name is not route-controlled data: the consumer lists the bucket, iterates every returned blob and creates one exchange per object from blob.getBlobId().getName() verbatim, and the filter option that could restrict those names is not applied at all unless it has been explicitly set. Google Cloud Storage object names are opaque UTF-8 keys that the service stores and lists exactly as written, with no server-side canonicalization, and a forward slash is only a display convention for pseudo-directories, so a key containing parent-directory segments survives round-tripping intact. An object name containing such segments therefore resolved to a location outside the configured downloadFileName directory, letting anyone able to influence the names present in the consumed bucket cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. The downloadFileName option is an ordinary consumer parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. The defect is consumer-only; the producer has no download-to-file sink. Camel\u0027s other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp, camel-azure-files and the Azure Storage download paths - already constrained their local downloads to the configured directory using a path-segment boundary check; camel-google-storage was the remaining object-store download sink not covered by that work.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, set the filter option to a regular expression that accepts only simple single-segment object names, so that any name carrying a path separator or a parent-directory segment is excluded before an exchange is created; note that no filtering whatsoever is applied when the option is left unset, and that the expression is matched against the whole object name. Alternatively, give downloadFileName an explicit expression that does not carry the remote path through, for example one built on ${file:onlyname} rather than the implicit ${file:name}, keeping in mind that a downloadFileName containing an expression is treated as route-author-controlled and is not covered by the containment check added in the fix. As defence in depth, treat the object names in any externally writable bucket as untrusted input and do not derive local filesystem paths from them.\u003c/p\u003e"
}
],
"value": "Relative path traversal vulnerability in Apache Camel Google Storage component.\n\n\n\nThis issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.\n\n\n\nThe camel-google-storage consumer downloads Google Cloud Storage objects to the local filesystem when the downloadFileName option is set. That option is documented as a folder or a filename, and when its value contains no expression token the consumer builds the local destination by appending the object name to it: evaluateFileExpression sets the Exchange file-name header to the remote object name and evaluates downloadFileName + \"/${file:name}\". The ${file:name} token returns the file-name header verbatim, unlike ${file:onlyname}, which applies FileUtil.stripPath to it. The resulting string was passed directly to new File(result) and blob.downloadTo(file.toPath()) with no lexical normalization and no check that the destination stayed inside the configured directory. The object name is not route-controlled data: the consumer lists the bucket, iterates every returned blob and creates one exchange per object from blob.getBlobId().getName() verbatim, and the filter option that could restrict those names is not applied at all unless it has been explicitly set. Google Cloud Storage object names are opaque UTF-8 keys that the service stores and lists exactly as written, with no server-side canonicalization, and a forward slash is only a display convention for pseudo-directories, so a key containing parent-directory segments survives round-tripping intact. An object name containing such segments therefore resolved to a location outside the configured downloadFileName directory, letting anyone able to influence the names present in the consumed bucket cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. The downloadFileName option is an ordinary consumer parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. The defect is consumer-only; the producer has no download-to-file sink. Camel\u0027s other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp, camel-azure-files and the Azure Storage download paths - already constrained their local downloads to the configured directory using a path-segment boundary check; camel-google-storage was the remaining object-store download sink not covered by that work.\n\n\n\nUsers are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, set the filter option to a regular expression that accepts only simple single-segment object names, so that any name carrying a path separator or a parent-directory segment is excluded before an exchange is created; note that no filtering whatsoever is applied when the option is left unset, and that the expression is matched against the whole object name. Alternatively, give downloadFileName an explicit expression that does not carry the remote path through, for example one built on ${file:onlyname} rather than the implicit ${file:name}, keeping in mind that a downloadFileName containing an expression is treated as route-author-controlled and is not covered by the containment check added in the fix. As defence in depth, treat the object names in any externally writable bucket as untrusted input and do not derive local filesystem paths from them."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual description of severity"
},
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-23",
"description": "CWE-23 Relative path traversal",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-24T16:13:04.957Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-66907.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-Google-Storage: the consumer appended the remote object name to the configured downloadFileName directory without constraining the result",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-66907",
"datePublished": "2026-08-24T16:13:04.957Z",
"dateReserved": "2026-07-28T09:28:37.811Z",
"dateUpdated": "2026-08-25T19:37:45.023Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-66906 (GCVE-0-2026-66906)
Vulnerability from cvelistv5
Published
2026-08-24 16:12
Modified
2026-08-25 19:37
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-23 - Relative path traversal
Summary
Relative path traversal vulnerability in Apache Camel Azure Storage Blob component.
This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.
The camel-azure-storage-blob component can download an Azure Storage blob to the local filesystem through its downloadBlobToFile operation, writing into the directory named by the fileDir endpoint option, which is documented as usable from both the producer and the consumer. BlobOperations.downloadBlobToFile built the local target by joining fileDir with the remote blob name exactly as the Azure SDK reported it (new File(fileDir, client.getBlobName())) and passed the result straight to the SDK download call, with no lexical normalization and no check that the resolved location stayed inside fileDir. The blob name is not route-controlled data: the consumer enumerates the container in BlobConsumer.createBatchExchangesFromContainer, which lists blobs and creates one exchange per entry from BlobItem.getName() verbatim, applying no name filtering by default. A blob name containing parent-directory segments therefore resolved to a location outside the configured fileDir, letting anyone able to influence the names present in the consumed container cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. Azure Storage blob containers use a flat namespace in which the blob name is an opaque key, so a name carrying such segments is stored and listed as given. The fileDir option is an ordinary common-group configuration parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. Camel's other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp and camel-azure-files - already constrained their local downloads to the configured directory using a path-segment boundary check; the camel-azure-storage-blob download path was not covered by that work.
Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, constrain the names the consumer will act on using the regex endpoint option, which is applied to each listed blob name as a full-string match, so that only simple single-segment names are accepted and any name carrying a path separator or a parent-directory segment is filtered out before an exchange is created; the prefix option can additionally narrow the listing server-side, noting that when both are set regex takes priority and prefix is ignored. Alternatively, avoid the downloadBlobToFile operation on untrusted containers and write the payload from the route under a file name the route itself controls, rather than one taken from the remote listing. As defence in depth, treat the blob names in any externally writable container as untrusted input and do not derive local filesystem paths from them.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.0.0 ≤ Version: 4.15.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2026-08-24T19:13:38.144Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/08/24/10"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "NONE",
"baseScore": 9.1,
"baseSeverity": "CRITICAL",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-66906",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-08-25T19:36:45.646535Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-08-25T19:37:02.605Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-azure-storage-blob",
"packageURL": "pkg:maven/org.apache.camel/camel-azure-storage-blob",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.14.9",
"status": "affected",
"version": "4.0.0",
"versionType": "semver"
},
{
"lessThan": "4.18.4",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThan": "4.22.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Hiep Nguyen"
},
{
"lang": "en",
"type": "finder",
"value": "n0mi1k"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Andrea Cosentino"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eRelative path traversal vulnerability in Apache Camel Azure Storage Blob component.\u003c/p\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.\u003c/p\u003e\u003cp\u003eThe camel-azure-storage-blob component can download an Azure Storage blob to the local filesystem through its downloadBlobToFile operation, writing into the directory named by the fileDir endpoint option, which is documented as usable from both the producer and the consumer. BlobOperations.downloadBlobToFile built the local target by joining fileDir with the remote blob name exactly as the Azure SDK reported it (new File(fileDir, client.getBlobName())) and passed the result straight to the SDK download call, with no lexical normalization and no check that the resolved location stayed inside fileDir. The blob name is not route-controlled data: the consumer enumerates the container in BlobConsumer.createBatchExchangesFromContainer, which lists blobs and creates one exchange per entry from BlobItem.getName() verbatim, applying no name filtering by default. A blob name containing parent-directory segments therefore resolved to a location outside the configured fileDir, letting anyone able to influence the names present in the consumed container cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. Azure Storage blob containers use a flat namespace in which the blob name is an opaque key, so a name carrying such segments is stored and listed as given. The fileDir option is an ordinary common-group configuration parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. Camel\u0027s other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp and camel-azure-files - already constrained their local downloads to the configured directory using a path-segment boundary check; the camel-azure-storage-blob download path was not covered by that work.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, constrain the names the consumer will act on using the regex endpoint option, which is applied to each listed blob name as a full-string match, so that only simple single-segment names are accepted and any name carrying a path separator or a parent-directory segment is filtered out before an exchange is created; the prefix option can additionally narrow the listing server-side, noting that when both are set regex takes priority and prefix is ignored. Alternatively, avoid the downloadBlobToFile operation on untrusted containers and write the payload from the route under a file name the route itself controls, rather than one taken from the remote listing. As defence in depth, treat the blob names in any externally writable container as untrusted input and do not derive local filesystem paths from them.\u003c/p\u003e"
}
],
"value": "Relative path traversal vulnerability in Apache Camel Azure Storage Blob component.\n\n\n\nThis issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.\n\n\n\nThe camel-azure-storage-blob component can download an Azure Storage blob to the local filesystem through its downloadBlobToFile operation, writing into the directory named by the fileDir endpoint option, which is documented as usable from both the producer and the consumer. BlobOperations.downloadBlobToFile built the local target by joining fileDir with the remote blob name exactly as the Azure SDK reported it (new File(fileDir, client.getBlobName())) and passed the result straight to the SDK download call, with no lexical normalization and no check that the resolved location stayed inside fileDir. The blob name is not route-controlled data: the consumer enumerates the container in BlobConsumer.createBatchExchangesFromContainer, which lists blobs and creates one exchange per entry from BlobItem.getName() verbatim, applying no name filtering by default. A blob name containing parent-directory segments therefore resolved to a location outside the configured fileDir, letting anyone able to influence the names present in the consumed container cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. Azure Storage blob containers use a flat namespace in which the blob name is an opaque key, so a name carrying such segments is stored and listed as given. The fileDir option is an ordinary common-group configuration parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. Camel\u0027s other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp and camel-azure-files - already constrained their local downloads to the configured directory using a path-segment boundary check; the camel-azure-storage-blob download path was not covered by that work.\n\n\n\nUsers are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, constrain the names the consumer will act on using the regex endpoint option, which is applied to each listed blob name as a full-string match, so that only simple single-segment names are accepted and any name carrying a path separator or a parent-directory segment is filtered out before an exchange is created; the prefix option can additionally narrow the listing server-side, noting that when both are set regex takes priority and prefix is ignored. Alternatively, avoid the downloadBlobToFile operation on untrusted containers and write the payload from the route under a file name the route itself controls, rather than one taken from the remote listing. As defence in depth, treat the blob names in any externally writable container as untrusted input and do not derive local filesystem paths from them."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual description of severity"
},
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-23",
"description": "CWE-23 Relative path traversal",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-24T16:12:09.993Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-66906.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-Azure-Storage-Blob: the downloadBlobToFile operation built the local download target from the remote blob name without constraining it to the configured fileDir",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-66906",
"datePublished": "2026-08-24T16:12:09.993Z",
"dateReserved": "2026-07-28T09:25:00.103Z",
"dateUpdated": "2026-08-25T19:37:02.605Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-60093 (GCVE-0-2026-60093)
Vulnerability from cvelistv5
Published
2026-08-24 16:11
Modified
2026-08-25 19:36
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-23 - Relative path traversal
Summary
Relative path traversal vulnerability in Apache Camel Azure-Storage Datalake component
This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.
The camel-azure-storage-datalake component can download an Azure Data Lake Storage Gen2 file to the local filesystem through its downloadToFile operation, writing into the directory named by the fileDir endpoint option. DataLakeFileOperations.downloadToFile built the local target by joining fileDir with the remote path name exactly as the Azure SDK reported it (new File(fileDir, fileClientWrapper.getFileName())) and passed the result straight to the SDK download call, with no lexical normalization and no check that the resolved location stayed inside fileDir. The remote name is not route-controlled data: the consumer enumerates the filesystem in DataLakeConsumer.createBatchExchangesFromPath, which lists paths and creates one exchange per entry from PathItem.getName() verbatim, applying no name filtering by default. A path name containing parent-directory segments therefore resolved to a location outside the configured fileDir, letting anyone able to influence the names present in the consumed Data Lake filesystem cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. The fileDir option is an ordinary common-group configuration parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. Camel's other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp and camel-azure-files - already constrained their local downloads to the configured directory using a path-segment boundary check; the camel-azure-storage-datalake download path was not covered by that work.
Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, constrain the names the consumer will act on using the regex endpoint option, which is applied to each listed path name as a full-string match, so that only simple single-segment names are accepted and any name carrying a path separator or a parent-directory segment is filtered out before an exchange is created. Alternatively, avoid the downloadToFile operation on untrusted filesystems and write the payload from the route under a file name the route itself controls, rather than one taken from the remote listing. As defence in depth, treat the object names in any externally writable Data Lake filesystem as untrusted input and do not derive local filesystem paths from them.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.0.0 ≤ Version: 4.15.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2026-08-24T19:13:36.688Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/08/24/8"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "NONE",
"baseScore": 5.5,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "HIGH",
"integrityImpact": "NONE",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-60093",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-08-25T19:35:53.944827Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-08-25T19:36:10.880Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-azure-storage-datalake",
"packageURL": "pkg:maven/org.apache.camel/camel-azure-storage-datalake",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.14.9",
"status": "affected",
"version": "4.0.0",
"versionType": "semver"
},
{
"lessThan": "4.18.4",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThan": "4.22.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Hiep Nguyen"
},
{
"lang": "en",
"type": "finder",
"value": "n0mi1k"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Andrea Cosentino"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eRelative path traversal vulnerability in Apache Camel Azure-Storage Datalake component\u003c/p\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.\u003c/p\u003e\u003cp\u003eThe camel-azure-storage-datalake component can download an Azure Data Lake Storage Gen2 file to the local filesystem through its downloadToFile operation, writing into the directory named by the fileDir endpoint option. DataLakeFileOperations.downloadToFile built the local target by joining fileDir with the remote path name exactly as the Azure SDK reported it (new File(fileDir, fileClientWrapper.getFileName())) and passed the result straight to the SDK download call, with no lexical normalization and no check that the resolved location stayed inside fileDir. The remote name is not route-controlled data: the consumer enumerates the filesystem in DataLakeConsumer.createBatchExchangesFromPath, which lists paths and creates one exchange per entry from PathItem.getName() verbatim, applying no name filtering by default. A path name containing parent-directory segments therefore resolved to a location outside the configured fileDir, letting anyone able to influence the names present in the consumed Data Lake filesystem cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. The fileDir option is an ordinary common-group configuration parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. Camel\u0027s other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp and camel-azure-files - already constrained their local downloads to the configured directory using a path-segment boundary check; the camel-azure-storage-datalake download path was not covered by that work.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, constrain the names the consumer will act on using the regex endpoint option, which is applied to each listed path name as a full-string match, so that only simple single-segment names are accepted and any name carrying a path separator or a parent-directory segment is filtered out before an exchange is created. Alternatively, avoid the downloadToFile operation on untrusted filesystems and write the payload from the route under a file name the route itself controls, rather than one taken from the remote listing. As defence in depth, treat the object names in any externally writable Data Lake filesystem as untrusted input and do not derive local filesystem paths from them.\u003c/p\u003e"
}
],
"value": "Relative path traversal vulnerability in Apache Camel Azure-Storage Datalake component\n\n\n\nThis issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.\n\n\n\nThe camel-azure-storage-datalake component can download an Azure Data Lake Storage Gen2 file to the local filesystem through its downloadToFile operation, writing into the directory named by the fileDir endpoint option. DataLakeFileOperations.downloadToFile built the local target by joining fileDir with the remote path name exactly as the Azure SDK reported it (new File(fileDir, fileClientWrapper.getFileName())) and passed the result straight to the SDK download call, with no lexical normalization and no check that the resolved location stayed inside fileDir. The remote name is not route-controlled data: the consumer enumerates the filesystem in DataLakeConsumer.createBatchExchangesFromPath, which lists paths and creates one exchange per entry from PathItem.getName() verbatim, applying no name filtering by default. A path name containing parent-directory segments therefore resolved to a location outside the configured fileDir, letting anyone able to influence the names present in the consumed Data Lake filesystem cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. The fileDir option is an ordinary common-group configuration parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. Camel\u0027s other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp and camel-azure-files - already constrained their local downloads to the configured directory using a path-segment boundary check; the camel-azure-storage-datalake download path was not covered by that work.\n\n\n\nUsers are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, constrain the names the consumer will act on using the regex endpoint option, which is applied to each listed path name as a full-string match, so that only simple single-segment names are accepted and any name carrying a path separator or a parent-directory segment is filtered out before an exchange is created. Alternatively, avoid the downloadToFile operation on untrusted filesystems and write the payload from the route under a file name the route itself controls, rather than one taken from the remote listing. As defence in depth, treat the object names in any externally writable Data Lake filesystem as untrusted input and do not derive local filesystem paths from them."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual description of severity"
},
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-23",
"description": "CWE-23 Relative path traversal",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-24T16:11:23.500Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-60093.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-Azure-Storage-DataLake: the downloadToFile operation built the local download target from the remote path name without constraining it to the configured fileDir",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-60093",
"datePublished": "2026-08-24T16:11:23.500Z",
"dateReserved": "2026-07-08T13:08:52.323Z",
"dateUpdated": "2026-08-25T19:36:10.880Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-59230 (GCVE-0-2026-59230)
Vulnerability from cvelistv5
Published
2026-08-24 16:09
Modified
2026-08-25 19:35
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-20 - Improper input validation
Summary
Improper input validation vulnerability in Apache Camel.
This issue affects Apache Camel: from 2.17.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.
The camel-mail component ships a MimeMultipart data format that can unmarshal a MIME multipart message. When it is configured with headersInline set to true, the unmarshal path copies the MIME headers of the incoming message onto the Camel message: it enumerates every header that is not one of the three standard ones it generates itself - Message-ID, MIME-Version and Content-Type - and calls setHeader for each, applying no HeaderFilterStrategy. The names of those MIME headers come from the message being unmarshalled, so a sender able to influence the message could place a header whose name falls in the Camel-internal namespace and have it set on the Exchange. Camel components read control headers from that namespace to override their configured behaviour - the camel-sql producer, for instance, takes the statement to execute from a Camel header when one is present - so an injected header could redirect what a downstream step in the route does with data the route author never intended it to take from the message. Which sinks are reachable, and what the consequences are, depends entirely on what the route does after the unmarshal step. The camel-mail consumer already applied a header filter strategy on its own inbound path, so this was the parallel inbound path into the same component that the earlier hardening did not cover. The affected copy is reached only when headersInline is enabled, which is not the default: with the default setting the MIME headers are surfaced as attachments rather than as message headers, and are not affected. The behaviour dates back to the introduction of the data format in 2.17.0 and was present on every release line until this fix.
Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, leave headersInline at its default of false where the inline headers are not needed, since the copy is only reached when it is enabled. Where it must stay enabled, strip Camel-internal headers immediately after the unmarshal step, for example with removeHeaders(“Camel*”) placed before any processor or producer that reads control headers, and do not unmarshal MIME content from an untrusted sender into a route that dispatches on header values. As defence in depth, treat the header names of any MIME message arriving from outside the trust boundary as untrusted input.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 2.17.0 ≤ Version: 4.15.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2026-08-24T19:13:35.169Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/08/24/7"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "NONE",
"baseScore": 6.5,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "LOW",
"integrityImpact": "LOW",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-59230",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-08-25T19:34:45.895471Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-08-25T19:35:08.113Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-mail",
"packageURL": "pkg:maven/org.apache.camel/camel-mail",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.14.9",
"status": "affected",
"version": "2.17.0",
"versionType": "semver"
},
{
"lessThan": "4.18.4",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThan": "4.22.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Atuin - Automated Vulnerability Discovery Engine, anciety of Tencent Xuanwu Lab"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Andrea Cosentino"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eImproper input validation vulnerability in Apache Camel.\u003c/p\u003e\u003cp\u003eThis issue affects Apache Camel: from 2.17.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.\u003c/p\u003e\u003cp\u003eThe camel-mail component ships a MimeMultipart data format that can unmarshal a MIME multipart message. When it is configured with headersInline set to true, the unmarshal path copies the MIME headers of the incoming message onto the Camel message: it enumerates every header that is not one of the three standard ones it generates itself - Message-ID, MIME-Version and Content-Type - and calls setHeader for each, applying no HeaderFilterStrategy. The names of those MIME headers come from the message being unmarshalled, so a sender able to influence the message could place a header whose name falls in the Camel-internal namespace and have it set on the Exchange. Camel components read control headers from that namespace to override their configured behaviour - the camel-sql producer, for instance, takes the statement to execute from a Camel header when one is present - so an injected header could redirect what a downstream step in the route does with data the route author never intended it to take from the message. Which sinks are reachable, and what the consequences are, depends entirely on what the route does after the unmarshal step. The camel-mail consumer already applied a header filter strategy on its own inbound path, so this was the parallel inbound path into the same component that the earlier hardening did not cover. The affected copy is reached only when headersInline is enabled, which is not the default: with the default setting the MIME headers are surfaced as attachments rather than as message headers, and are not affected. The behaviour dates back to the introduction of the data format in 2.17.0 and was present on every release line until this fix.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, leave headersInline at its default of false where the inline headers are not needed, since the copy is only reached when it is enabled. Where it must stay enabled, strip Camel-internal headers immediately after the unmarshal step, for example with removeHeaders(\u201cCamel*\u201d) placed before any processor or producer that reads control headers, and do not unmarshal MIME content from an untrusted sender into a route that dispatches on header values. As defence in depth, treat the header names of any MIME message arriving from outside the trust boundary as untrusted input.\u003c/p\u003e"
}
],
"value": "Improper input validation vulnerability in Apache Camel.\n\n\n\nThis issue affects Apache Camel: from 2.17.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.\n\n\n\nThe camel-mail component ships a MimeMultipart data format that can unmarshal a MIME multipart message. When it is configured with headersInline set to true, the unmarshal path copies the MIME headers of the incoming message onto the Camel message: it enumerates every header that is not one of the three standard ones it generates itself - Message-ID, MIME-Version and Content-Type - and calls setHeader for each, applying no HeaderFilterStrategy. The names of those MIME headers come from the message being unmarshalled, so a sender able to influence the message could place a header whose name falls in the Camel-internal namespace and have it set on the Exchange. Camel components read control headers from that namespace to override their configured behaviour - the camel-sql producer, for instance, takes the statement to execute from a Camel header when one is present - so an injected header could redirect what a downstream step in the route does with data the route author never intended it to take from the message. Which sinks are reachable, and what the consequences are, depends entirely on what the route does after the unmarshal step. The camel-mail consumer already applied a header filter strategy on its own inbound path, so this was the parallel inbound path into the same component that the earlier hardening did not cover. The affected copy is reached only when headersInline is enabled, which is not the default: with the default setting the MIME headers are surfaced as attachments rather than as message headers, and are not affected. The behaviour dates back to the introduction of the data format in 2.17.0 and was present on every release line until this fix.\n\n\n\nUsers are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, leave headersInline at its default of false where the inline headers are not needed, since the copy is only reached when it is enabled. Where it must stay enabled, strip Camel-internal headers immediately after the unmarshal step, for example with removeHeaders(\u201cCamel*\u201d) placed before any processor or producer that reads control headers, and do not unmarshal MIME content from an untrusted sender into a route that dispatches on header values. As defence in depth, treat the header names of any MIME message arriving from outside the trust boundary as untrusted input."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual severity rating"
},
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-20",
"description": "CWE-20 Improper input validation",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-24T16:09:44.229Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-59230.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-Mail: the MimeMultipart data format copied MIME headers onto the Camel message without a header filter strategy when unmarshalling with headersInline enabled",
"x_generator": {
"engine": "Vulnogram 1.0.3"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-59230",
"datePublished": "2026-08-24T16:09:44.229Z",
"dateReserved": "2026-07-03T10:47:39.960Z",
"dateUpdated": "2026-08-25T19:35:08.113Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-46588 (GCVE-0-2026-46588)
Vulnerability from cvelistv5
Published
2026-07-06 09:36
Modified
2026-07-06 21:31
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-20 - Improper Input Validation
Summary
Improper Input Validation vulnerability in Apache Camel.
This issue affects Apache Camel: through 4.14.7, from 4.15.0 through 4.18.2, from 4.19.0 through 4.20.0.
Users are recommended to upgrade to version 4.14.8, 4.18.3, 4.21.0, which fixes the issue.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 0 ≤ 4.14.7 Version: 4.15.0 ≤ 4.18.2 Version: 4.19.0 ≤ 4.20.0 |
{
"containers": {
"adp": [
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "LOW",
"baseScore": 7.3,
"baseSeverity": "HIGH",
"confidentialityImpact": "LOW",
"integrityImpact": "LOW",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-46588",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-06T18:37:28.968816Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T18:37:55.588Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
},
{
"providerMetadata": {
"dateUpdated": "2026-07-06T21:31:57.875Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/07/06/16"
}
],
"title": "CVE Program Container"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThanOrEqual": "4.14.7",
"status": "affected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "4.18.2",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThanOrEqual": "4.20.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "reporter",
"value": "Yu Bao - yubao@paypal.com, who works for paypal.com."
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eImproper Input Validation vulnerability in Apache Camel.\u003c/p\u003e\u003cp\u003eThis issue affects Apache Camel: through 4.14.7, from 4.15.0 through 4.18.2, from 4.19.0 through 4.20.0.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.14.8, 4.18.3, 4.21.0, which fixes the issue.\u003c/p\u003e"
}
],
"value": "Improper Input Validation vulnerability in Apache Camel.\n\nThis issue affects Apache Camel: through 4.14.7, from 4.15.0 through 4.18.2, from 4.19.0 through 4.20.0.\n\nUsers are recommended to upgrade to version 4.14.8, 4.18.3, 4.21.0, which fixes the issue."
}
],
"metrics": [
{
"other": {
"content": {
"text": "important"
},
"type": "Textual description of severity"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-20",
"description": "CWE-20 Improper Input Validation",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T09:36:25.163Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-46588.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: CouchDB: Non-Camel-prefixed Exchange headers bypass HeaderFilterStrategy allowing operation override from untrusted input",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-46588",
"datePublished": "2026-07-06T09:36:25.163Z",
"dateReserved": "2026-05-15T08:57:46.627Z",
"dateUpdated": "2026-07-06T21:31:57.875Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-46587 (GCVE-0-2026-46587)
Vulnerability from cvelistv5
Published
2026-07-06 09:35
Modified
2026-07-06 21:31
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-20 - Improper Input Validation
Summary
Improper Input Validation vulnerability in Apache Camel.
This issue affects Apache Camel: through 4.14.7, from 4.15.0 through 4.18.2, from 4.19.0 through 4.20.0.
Users are recommended to upgrade to version 4.14.8, 4.18.3, 4.21.0, which fixes the issue.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 0 ≤ 4.14.7 Version: 4.15.0 ≤ 4.18.2 Version: 4.19.0 ≤ 4.20.0 |
{
"containers": {
"adp": [
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "LOW",
"baseScore": 7.3,
"baseSeverity": "HIGH",
"confidentialityImpact": "LOW",
"integrityImpact": "LOW",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-46587",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-06T18:39:16.885479Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T18:39:34.367Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
},
{
"providerMetadata": {
"dateUpdated": "2026-07-06T21:31:56.383Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/07/06/15"
}
],
"title": "CVE Program Container"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThanOrEqual": "4.14.7",
"status": "affected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "4.18.2",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThanOrEqual": "4.20.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "reporter",
"value": "Yu Bao - yubao@paypal.com, who works for paypal.com."
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eImproper Input Validation vulnerability in Apache Camel.\u003c/p\u003e\u003cp\u003eThis issue affects Apache Camel: through 4.14.7, from 4.15.0 through 4.18.2, from 4.19.0 through 4.20.0.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.14.8, 4.18.3, 4.21.0, which fixes the issue.\u003c/p\u003e"
}
],
"value": "Improper Input Validation vulnerability in Apache Camel.\n\nThis issue affects Apache Camel: through 4.14.7, from 4.15.0 through 4.18.2, from 4.19.0 through 4.20.0.\n\nUsers are recommended to upgrade to version 4.14.8, 4.18.3, 4.21.0, which fixes the issue."
}
],
"metrics": [
{
"other": {
"content": {
"text": "important"
},
"type": "Textual description of severity"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-20",
"description": "CWE-20 Improper Input Validation",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T09:35:31.928Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-46587.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Couchbase: Non-Camel-prefixed Exchange headers bypass HeaderFilterStrategy allowing operation override from untrusted input",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-46587",
"datePublished": "2026-07-06T09:35:31.928Z",
"dateReserved": "2026-05-15T08:56:50.216Z",
"dateUpdated": "2026-07-06T21:31:56.383Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-49042 (GCVE-0-2026-49042)
Vulnerability from cvelistv5
Published
2026-07-06 09:34
Modified
2026-07-06 21:31
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-20 - Improper Input Validation
Summary
Improper Input Validation vulnerability in Apache Camel.
This issue affects Apache Camel: from 4.8.0 through 4.18.2, from 4.19.0 through 4.20.0.
Users are recommended to upgrade to version 4.18.3, 4.21.0, which fixes the issue.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.8.0 ≤ 4.18.2 Version: 4.19.0 ≤ 4.20.0 |
{
"containers": {
"adp": [
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "LOW",
"baseScore": 7.3,
"baseSeverity": "HIGH",
"confidentialityImpact": "LOW",
"integrityImpact": "LOW",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-49042",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-06T18:39:58.115864Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T18:40:31.559Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
},
{
"providerMetadata": {
"dateUpdated": "2026-07-06T21:31:59.344Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/07/06/17"
}
],
"title": "CVE Program Container"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThanOrEqual": "4.18.2",
"status": "affected",
"version": "4.8.0",
"versionType": "semver"
},
{
"lessThanOrEqual": "4.20.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "reporter",
"value": "Yu Bao - yubao@paypal.com, who works for paypal.com."
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eImproper Input Validation vulnerability in Apache Camel.\u003c/p\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.8.0 through 4.18.2, from 4.19.0 through 4.20.0.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.18.3, 4.21.0, which fixes the issue.\u003c/p\u003e\u003cbr\u003e"
}
],
"value": "Improper Input Validation vulnerability in Apache Camel.\n\nThis issue affects Apache Camel: from 4.8.0 through 4.18.2, from 4.19.0 through 4.20.0.\n\nUsers are recommended to upgrade to version 4.18.3, 4.21.0, which fixes the issue."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual description of severity"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-20",
"description": "CWE-20 Improper Input Validation",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T09:34:48.956Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-49042.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: langchain4j-tools: filter tool argument headers against declared parameters",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-49042",
"datePublished": "2026-07-06T09:34:48.956Z",
"dateReserved": "2026-05-27T07:43:27.847Z",
"dateUpdated": "2026-07-06T21:31:59.344Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-43866 (GCVE-0-2026-43866)
Vulnerability from cvelistv5
Published
2026-07-06 08:35
Modified
2026-07-06 19:10
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-502 - Deserialization of Untrusted Data
Summary
Deserialization of Untrusted Data vulnerability in Apache Camel, Apache Camel JMS component.
JmsBinding.extractBodyFromJms() in camel-jms - and the equivalent JmsBinding in camel-sjms - deserializes the payload of an incoming JMS ObjectMessage via jakarta.jms.ObjectMessage.getObject() whenever the mapJmsMessage option is enabled (the default) and Camel acts as a JMS consumer. The CVE-2026-40860 hardening added a post-deserialization class check that rejects classes outside the default allow-list java.**;javax.**;org.apache.camel.**;!*. However org.apache.camel.support.DefaultExchangeHolder itself lives in the allow-listed org.apache.camel.** namespace, so an ObjectMessage whose top-level object is a DefaultExchangeHolder passes the check. The receiving side then calls DefaultExchangeHolder.unmarshal() on it without requiring the transferExchange option to be enabled - an asymmetric trust boundary, since the sending side gates ObjectMessage and transferExchange handling but the receiving side did not - writing every non-null field of the holder into the Exchange: the message body, the IN and OUT headers, the exchange properties, the variables, the exchange id and the exception. An attacker who can publish an ObjectMessage to a queue or topic consumed by an affected Camel application can therefore inject arbitrary Exchange state using only universally-trusted java.lang and java.util types, with no deserialization gadget chain required, to manipulate routing and headers, exchange properties and error handling. The same handling applies to camel-sjms and camel-sjms2, and to the JMS-family components built on JmsComponent and JmsBinding: camel-amqp, camel-activemq and camel-activemq6. This is a bypass of the CVE-2026-40860 fix rather than a flaw in it.
This issue affects Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0; Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, JMS ObjectMessage handling is disabled by default in camel-jms, camel-sjms and the JMS-family components (a new objectMessageEnabled option defaults to false at the component and endpoint level), so an incoming ObjectMessage - including a DefaultExchangeHolder payload - is no longer deserialized unless the option is explicitly enabled; only set objectMessageEnabled=true when the consumed JMS destination is fed exclusively by trusted producers. For deployments that cannot upgrade immediately, restrict publish access to the queues and topics consumed by Camel to trusted producers via JMS broker authorization, and do not expose JMS consumers that map ObjectMessage bodies to untrusted networks; a JMS-provider deserialization allow-list does not mitigate this specific bypass because the crafted payload uses only universally-trusted classes.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 3.0.0 ≤ Version: 4.15.0 ≤ Version: 4.19.0 ≤ |
|||||||
|
|||||||||
{
"containers": {
"adp": [
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "LOW",
"baseScore": 7.3,
"baseSeverity": "HIGH",
"confidentialityImpact": "LOW",
"integrityImpact": "LOW",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-43866",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-06T19:09:40.858071Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T19:10:00.576Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-jms",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.14.8",
"status": "affected",
"version": "3.0.0",
"versionType": "semver"
},
{
"lessThan": "4.18.3",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThan": "4.21.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
},
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-sjms",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.14.8",
"status": "affected",
"version": "3.0.0",
"versionType": "semver"
},
{
"lessThan": "4.18.3",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThan": "4.21.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "gaorenyusi"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Andrea Cosentino"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eDeserialization of Untrusted Data vulnerability in Apache Camel, Apache Camel JMS component.\u003c/p\u003e\u003cspan style=\"background-color: rgb(255, 255, 255);\"\u003eJmsBinding.extractBodyFromJms() in camel-jms - and the equivalent JmsBinding in camel-sjms - deserializes the payload of an incoming JMS ObjectMessage via jakarta.jms.ObjectMessage.getObject() whenever the mapJmsMessage option is enabled (the default) and Camel acts as a JMS consumer. The CVE-2026-40860 hardening added a post-deserialization class check that rejects classes outside the default allow-list java.**;javax.**;org.apache.camel.**;!*. However org.apache.camel.support.DefaultExchangeHolder itself lives in the allow-listed org.apache.camel.** namespace, so an ObjectMessage whose top-level object is a DefaultExchangeHolder passes the check. The receiving side then calls DefaultExchangeHolder.unmarshal() on it without requiring the transferExchange option to be enabled - an asymmetric trust boundary, since the sending side gates ObjectMessage and transferExchange handling but the receiving side did not - writing every non-null field of the holder into the Exchange: the message body, the IN and OUT headers, the exchange properties, the variables, the exchange id and the exception. An attacker who can publish an ObjectMessage to a queue or topic consumed by an affected Camel application can therefore inject arbitrary Exchange state using only universally-trusted java.lang and java.util types, with no deserialization gadget chain required, to manipulate routing and headers, exchange properties and error handling. The same handling applies to camel-sjms and camel-sjms2, and to the JMS-family components built on JmsComponent and JmsBinding: camel-amqp, camel-activemq and camel-activemq6. This is a bypass of the CVE-2026-40860 fix rather than a flaw in it.\u003c/span\u003e\u003cbr\u003e\u003cp\u003eThis issue affects Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0; Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\u003c/p\u003e\u003cspan style=\"background-color: rgb(255, 255, 255);\"\u003eUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, JMS ObjectMessage handling is disabled by default in camel-jms, camel-sjms and the JMS-family components (a new objectMessageEnabled option defaults to false at the component and endpoint level), so an incoming ObjectMessage - including a DefaultExchangeHolder payload - is no longer deserialized unless the option is explicitly enabled; only set objectMessageEnabled=true when the consumed JMS destination is fed exclusively by trusted producers. For deployments that cannot upgrade immediately, restrict publish access to the queues and topics consumed by Camel to trusted producers via JMS broker authorization, and do not expose JMS consumers that map ObjectMessage bodies to untrusted networks; a JMS-provider deserialization allow-list does not mitigate this specific bypass because the crafted payload uses only universally-trusted classes.\u003c/span\u003e\u003cbr\u003e"
}
],
"value": "Deserialization of Untrusted Data vulnerability in Apache Camel, Apache Camel JMS component.\n\nJmsBinding.extractBodyFromJms() in camel-jms - and the equivalent JmsBinding in camel-sjms - deserializes the payload of an incoming JMS ObjectMessage via jakarta.jms.ObjectMessage.getObject() whenever the mapJmsMessage option is enabled (the default) and Camel acts as a JMS consumer. The CVE-2026-40860 hardening added a post-deserialization class check that rejects classes outside the default allow-list java.**;javax.**;org.apache.camel.**;!*. However org.apache.camel.support.DefaultExchangeHolder itself lives in the allow-listed org.apache.camel.** namespace, so an ObjectMessage whose top-level object is a DefaultExchangeHolder passes the check. The receiving side then calls DefaultExchangeHolder.unmarshal() on it without requiring the transferExchange option to be enabled - an asymmetric trust boundary, since the sending side gates ObjectMessage and transferExchange handling but the receiving side did not - writing every non-null field of the holder into the Exchange: the message body, the IN and OUT headers, the exchange properties, the variables, the exchange id and the exception. An attacker who can publish an ObjectMessage to a queue or topic consumed by an affected Camel application can therefore inject arbitrary Exchange state using only universally-trusted java.lang and java.util types, with no deserialization gadget chain required, to manipulate routing and headers, exchange properties and error handling. The same handling applies to camel-sjms and camel-sjms2, and to the JMS-family components built on JmsComponent and JmsBinding: camel-amqp, camel-activemq and camel-activemq6. This is a bypass of the CVE-2026-40860 fix rather than a flaw in it.\nThis issue affects Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0; Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\n\nUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, JMS ObjectMessage handling is disabled by default in camel-jms, camel-sjms and the JMS-family components (a new objectMessageEnabled option defaults to false at the component and endpoint level), so an incoming ObjectMessage - including a DefaultExchangeHolder payload - is no longer deserialized unless the option is explicitly enabled; only set objectMessageEnabled=true when the consumed JMS destination is fed exclusively by trusted producers. For deployments that cannot upgrade immediately, restrict publish access to the queues and topics consumed by Camel to trusted producers via JMS broker authorization, and do not expose JMS consumers that map ObjectMessage bodies to untrusted networks; a JMS-provider deserialization allow-list does not mitigate this specific bypass because the crafted payload uses only universally-trusted classes."
}
],
"metrics": [
{
"other": {
"content": {
"text": "important"
},
"type": "Textual description of severity"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-502",
"description": "CWE-502 Deserialization of Untrusted Data",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T08:35:04.935Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-43866.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel, Apache Camel: Camel JMS - CVE-2026-40860 fix bypass via DefaultExchangeHolder",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-43866",
"datePublished": "2026-07-06T08:35:04.935Z",
"dateReserved": "2026-05-04T11:44:06.700Z",
"dateUpdated": "2026-07-06T19:10:00.576Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-43867 (GCVE-0-2026-43867)
Vulnerability from cvelistv5
Published
2026-07-06 08:24
Modified
2026-07-06 19:27
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-502 - Deserialization of Untrusted Data
Summary
Deserialization of Untrusted Data vulnerability in Apache Camel PQC Component.
The camel-pqc component persists post-quantum key metadata (KeyMetadata) through pluggable KeyLifecycleManager implementations. AwsSecretsManagerKeyLifecycleManager.deserializeMetadata() reads that metadata back from the configured AWS Secrets Manager secret by Base64-decoding the stored value and deserializing it with a raw java.io.ObjectInputStream.readObject() and no ObjectInputFilter or class allow-list; the cast to KeyMetadata happens only after readObject() returns, so any readObject() side effects in a crafted object run before the type check. A principal who can write to the AWS Secrets Manager secret that holds this metadata (requiring secretsmanager:PutSecretValue on that secret) could store a crafted serialized object that is deserialized during normal key-lifecycle operations, potentially leading to code execution in the context of the application that manages the keys. This is the same underlying defect, in the same code path and remediated by the same fix, as CVE-2026-46590, which was reported independently and additionally covers the HashiCorp Vault and file-based sibling managers; both are incomplete-remediation follow-ons to CVE-2026-40048 (CAMEL-23200).
This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, restrict write access to the AWS Secrets Manager secret that holds the camel-pqc key metadata so that only the application’s own identity holds secretsmanager:PutSecretValue on it (least-privilege IAM), and keep the PQC key material in a secret separate from any data that less-trusted principals can write.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.18.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-43867",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-06T19:27:13.344138Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T19:27:29.706Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-pqc",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.18.3",
"status": "affected",
"version": "4.18.0",
"versionType": "semver"
},
{
"lessThan": "4.21.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Venkatraman Kumar from Securin"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Andrea Cosentino"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eDeserialization of Untrusted Data vulnerability in Apache Camel PQC Component.\u003c/p\u003e\u003cspan style=\"background-color: rgb(255, 255, 255);\"\u003eThe camel-pqc component persists post-quantum key metadata (KeyMetadata) through pluggable KeyLifecycleManager implementations. AwsSecretsManagerKeyLifecycleManager.deserializeMetadata() reads that metadata back from the configured AWS Secrets Manager secret by Base64-decoding the stored value and deserializing it with a raw java.io.ObjectInputStream.readObject() and no ObjectInputFilter or class allow-list; the cast to KeyMetadata happens only after readObject() returns, so any readObject() side effects in a crafted object run before the type check. A principal who can write to the AWS Secrets Manager secret that holds this metadata (requiring secretsmanager:PutSecretValue on that secret) could store a crafted serialized object that is deserialized during normal key-lifecycle operations, potentially leading to code execution in the context of the application that manages the keys. This is the same underlying defect, in the same code path and remediated by the same fix, as CVE-2026-46590, which was reported independently and additionally covers the HashiCorp Vault and file-based sibling managers; both are incomplete-remediation follow-ons to CVE-2026-40048 (CAMEL-23200).\u003c/span\u003e\u003cbr\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0.\u003c/p\u003e\u003cp\u003e\u003cspan style=\"background-color: rgb(255, 255, 255);\"\u003eUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, restrict write access to the AWS Secrets Manager secret that holds the camel-pqc key metadata so that only the application\u2019s own identity holds secretsmanager:PutSecretValue on it (least-privilege IAM), and keep the PQC key material in a secret separate from any data that less-trusted principals can write.\u003c/span\u003e\u003c/p\u003e"
}
],
"value": "Deserialization of Untrusted Data vulnerability in Apache Camel PQC Component.\n\nThe camel-pqc component persists post-quantum key metadata (KeyMetadata) through pluggable KeyLifecycleManager implementations. AwsSecretsManagerKeyLifecycleManager.deserializeMetadata() reads that metadata back from the configured AWS Secrets Manager secret by Base64-decoding the stored value and deserializing it with a raw java.io.ObjectInputStream.readObject() and no ObjectInputFilter or class allow-list; the cast to KeyMetadata happens only after readObject() returns, so any readObject() side effects in a crafted object run before the type check. A principal who can write to the AWS Secrets Manager secret that holds this metadata (requiring secretsmanager:PutSecretValue on that secret) could store a crafted serialized object that is deserialized during normal key-lifecycle operations, potentially leading to code execution in the context of the application that manages the keys. This is the same underlying defect, in the same code path and remediated by the same fix, as CVE-2026-46590, which was reported independently and additionally covers the HashiCorp Vault and file-based sibling managers; both are incomplete-remediation follow-ons to CVE-2026-40048 (CAMEL-23200).\nThis issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0.\n\nUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, restrict write access to the AWS Secrets Manager secret that holds the camel-pqc key metadata so that only the application\u2019s own identity holds secretsmanager:PutSecretValue on it (least-privilege IAM), and keep the PQC key material in a secret separate from any data that less-trusted principals can write."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual description of severity"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-502",
"description": "CWE-502 Deserialization of Untrusted Data",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T08:24:10.108Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-43867.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-PQC: The AWS Secrets Manager key-lifecycle manager deserializes persisted key metadata with java.io.ObjectInputStream and no ObjectInputFilter",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-43867",
"datePublished": "2026-07-06T08:24:10.108Z",
"dateReserved": "2026-05-04T11:46:36.123Z",
"dateUpdated": "2026-07-06T19:27:29.706Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-49365 (GCVE-0-2026-49365)
Vulnerability from cvelistv5
Published
2026-07-06 08:11
Modified
2026-07-07 12:34
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-209 - Generation of Error Message Containing Sensitive Information
Summary
Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Netty HTTP component.
The camel-netty-http HTTP server consumer exposes a muteException option that controls what is returned to the client when a route processing error occurs. This option defaulted to false because the backing field was an uninitialised primitive boolean (Java's default of false), whereas the other Camel HTTP server components (camel-http / camel-jetty / camel-servlet and camel-platform-http) default it to true. With muteException=false, when a request triggers an exception during route processing the consumer writes the full Throwable stack trace into the HTTP response body as text/plain (via DefaultNettyHttpBinding) instead of returning an empty body. Any unauthenticated client that can reach the endpoint and cause a processing error - for example by sending a malformed request body, an invalid parameter, or otherwise triggering a route-internal failure - therefore receives a complete Java stack trace. Such a stack trace can disclose sensitive internal information, including credentials embedded in exception messages, internal host names and IP addresses, filesystem paths, dependency and version details, database and class names, and the application's internal structure, which an attacker can use to plan further attacks.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, set muteException=true explicitly on the camel-netty-http consumer (for example netty-http: http://0.0.0.0:8080/api?muteException=true , or globally via the camel.component.netty-http.configuration.mute-exception=true property), so that processing errors no longer return the stack trace to the client.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.0.0 ≤ Version: 4.15.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2026-07-06T09:25:45.988Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/07/05/25"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "NONE",
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "LOW",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-49365",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-07T12:34:23.255778Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-07T12:34:51.854Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-netty-http",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.14.8",
"status": "affected",
"version": "4.0.0",
"versionType": "semver"
},
{
"lessThan": "4.18.3",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThan": "4.21.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Yu Bao from PayPal"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Andrea Cosentino"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eGeneration of Error Message Containing Sensitive Information vulnerability in Apache Camel Netty HTTP component.\u003c/p\u003eThe camel-netty-http HTTP server consumer exposes a muteException option that controls what is returned to the client when a route processing error occurs. This option defaulted to false because the backing field was an uninitialised primitive boolean (Java\u0027s default of false), whereas the other Camel HTTP server components (camel-http / camel-jetty / camel-servlet and camel-platform-http) default it to true. With muteException=false, when a request triggers an exception during route processing the consumer writes the full Throwable stack trace into the HTTP response body as text/plain (via DefaultNettyHttpBinding) instead of returning an empty body. Any unauthenticated client that can reach the endpoint and cause a processing error - for example by sending a malformed request body, an invalid parameter, or otherwise triggering a route-internal failure - therefore receives a complete Java stack trace. Such a stack trace can disclose sensitive internal information, including credentials embedded in exception messages, internal host names and IP addresses, filesystem paths, dependency and version details, database and class names, and the application\u0027s internal structure, which an attacker can use to plan further attacks.\u003cbr\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, set muteException=true explicitly on the camel-netty-http consumer (for example netty-http:\u003ca target=\"_blank\" rel=\"nofollow\" href=\"http://0.0.0.0:8080/api?muteException=true\"\u003ehttp://0.0.0.0:8080/api?muteException=true\u003c/a\u003e, or globally via the camel.component.netty-http.configuration.mute-exception=true property), so that processing errors no longer return the stack trace to the client.\u003c/p\u003e"
}
],
"value": "Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Netty HTTP component.\n\nThe camel-netty-http HTTP server consumer exposes a muteException option that controls what is returned to the client when a route processing error occurs. This option defaulted to false because the backing field was an uninitialised primitive boolean (Java\u0027s default of false), whereas the other Camel HTTP server components (camel-http / camel-jetty / camel-servlet and camel-platform-http) default it to true. With muteException=false, when a request triggers an exception during route processing the consumer writes the full Throwable stack trace into the HTTP response body as text/plain (via DefaultNettyHttpBinding) instead of returning an empty body. Any unauthenticated client that can reach the endpoint and cause a processing error - for example by sending a malformed request body, an invalid parameter, or otherwise triggering a route-internal failure - therefore receives a complete Java stack trace. Such a stack trace can disclose sensitive internal information, including credentials embedded in exception messages, internal host names and IP addresses, filesystem paths, dependency and version details, database and class names, and the application\u0027s internal structure, which an attacker can use to plan further attacks.\nThis issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\n\nUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, set muteException=true explicitly on the camel-netty-http consumer (for example netty-http: http://0.0.0.0:8080/api?muteException=true , or globally via the camel.component.netty-http.configuration.mute-exception=true property), so that processing errors no longer return the stack trace to the client."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual description of severity"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-209",
"description": "CWE-209 Generation of Error Message Containing Sensitive Information",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T08:11:49.232Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-49365.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-Netty-HTTP: The muteException consumer option defaulted to false, so a processing error returned the full Java stack trace in the HTTP response body, disclosing sensitive internal information to unauthenticated clients",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-49365",
"datePublished": "2026-07-06T08:11:49.232Z",
"dateReserved": "2026-05-29T16:50:08.917Z",
"dateUpdated": "2026-07-07T12:34:51.854Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-49098 (GCVE-0-2026-49098)
Vulnerability from cvelistv5
Published
2026-07-06 08:10
Modified
2026-07-07 12:27
Severity ?
VLAI Severity ?
EPSS score ?
CWE
Summary
Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel Kafka Component.
The camel-kafka producer can override its configured target topic at runtime from the kafka.OVERRIDE_TOPIC Exchange header: KafkaProducer.evaluateTopic() returns the header value in preference to the topic configured on the endpoint. The control-header constants in KafkaConstants (for example OVERRIDE_TOPIC = kafka.OVERRIDE_TOPIC, OVERRIDE_TIMESTAMP = kafka.OVERRIDE_TIMESTAMP, PARTITION_KEY = kafka.PARTITION_KEY) used plain, non-Camel-prefixed values. camel-kafka's own KafkaHeaderFilterStrategy does filter the kafka.* namespace, but only on the Kafka-to-Exchange serialization boundary (reading Kafka record headers into the Exchange, and writing Exchange headers into a Kafka record); it does not apply to headers that arrive from an upstream consumer in a multi-component route. The upstream HTTP consumer uses HttpHeaderFilterStrategy, which blocks only the Camel / camel namespace, so a kafka.* header passes through unfiltered. As a result, in a route that bridges an HTTP consumer (for example platform-http) into a kafka: producer, any HTTP client could set the kafka.OVERRIDE_TOPIC header and cause the message to be published to an arbitrary Kafka topic instead of the configured one - redirecting it to a sensitive internal topic, or injecting attacker-crafted messages into a topic consumed by a critical downstream service. The related kafka.OVERRIDE_TIMESTAMP and kafka.PARTITION_KEY headers could likewise be injected to backdate messages or target specific partitions. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set or read Kafka headers via the raw header names must use the CamelKafka* names (for example CamelKafkaOverrideTopic and CamelKafkaTopic) instead of the old kafka.* values. For deployments that cannot upgrade immediately, strip the kafka.* headers from any untrusted ingress before the kafka: producer (for example removeHeaders('kafka.*') at the start of the route), and set the target topic from a trusted source.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.0.0 ≤ Version: 4.15.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2026-07-06T09:25:41.455Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/07/05/23"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "NONE",
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "LOW",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-49098",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-07T12:24:16.922525Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-07T12:27:08.483Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-kafka",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.14.8",
"status": "affected",
"version": "4.0.0",
"versionType": "semver"
},
{
"lessThan": "4.18.3",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThan": "4.21.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Yu Bao from PayPal"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Andrea Cosentino"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eImproper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027) vulnerability in Apache Camel Kafka Component.\u003c/p\u003eThe camel-kafka producer can override its configured target topic at runtime from the kafka.OVERRIDE_TOPIC Exchange header: KafkaProducer.evaluateTopic() returns the header value in preference to the topic configured on the endpoint. The control-header constants in KafkaConstants (for example OVERRIDE_TOPIC = kafka.OVERRIDE_TOPIC, OVERRIDE_TIMESTAMP = kafka.OVERRIDE_TIMESTAMP, PARTITION_KEY = kafka.PARTITION_KEY) used plain, non-Camel-prefixed values. camel-kafka\u0027s own KafkaHeaderFilterStrategy does filter the kafka.* namespace, but only on the Kafka-to-Exchange serialization boundary (reading Kafka record headers into the Exchange, and writing Exchange headers into a Kafka record); it does not apply to headers that arrive from an upstream consumer in a multi-component route. The upstream HTTP consumer uses HttpHeaderFilterStrategy, which blocks only the Camel / camel namespace, so a kafka.* header passes through unfiltered. As a result, in a route that bridges an HTTP consumer (for example platform-http) into a kafka: producer, any HTTP client could set the kafka.OVERRIDE_TOPIC header and cause the message to be published to an arbitrary Kafka topic instead of the configured one - redirecting it to a sensitive internal topic, or injecting attacker-crafted messages into a topic consumed by a critical downstream service. The related kafka.OVERRIDE_TIMESTAMP and kafka.PARTITION_KEY headers could likewise be injected to backdate messages or target specific partitions. No credentials are required when the bridging consumer is unauthenticated.\u003cbr\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set or read Kafka headers via the raw header names must use the CamelKafka* names (for example CamelKafkaOverrideTopic and CamelKafkaTopic) instead of the old kafka.* values. For deployments that cannot upgrade immediately, strip the kafka.* headers from any untrusted ingress before the kafka: producer (for example removeHeaders(\u0027kafka.*\u0027) at the start of the route), and set the target topic from a trusted source.\u003c/p\u003e"
}
],
"value": "Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027) vulnerability in Apache Camel Kafka Component.\n\nThe camel-kafka producer can override its configured target topic at runtime from the kafka.OVERRIDE_TOPIC Exchange header: KafkaProducer.evaluateTopic() returns the header value in preference to the topic configured on the endpoint. The control-header constants in KafkaConstants (for example OVERRIDE_TOPIC = kafka.OVERRIDE_TOPIC, OVERRIDE_TIMESTAMP = kafka.OVERRIDE_TIMESTAMP, PARTITION_KEY = kafka.PARTITION_KEY) used plain, non-Camel-prefixed values. camel-kafka\u0027s own KafkaHeaderFilterStrategy does filter the kafka.* namespace, but only on the Kafka-to-Exchange serialization boundary (reading Kafka record headers into the Exchange, and writing Exchange headers into a Kafka record); it does not apply to headers that arrive from an upstream consumer in a multi-component route. The upstream HTTP consumer uses HttpHeaderFilterStrategy, which blocks only the Camel / camel namespace, so a kafka.* header passes through unfiltered. As a result, in a route that bridges an HTTP consumer (for example platform-http) into a kafka: producer, any HTTP client could set the kafka.OVERRIDE_TOPIC header and cause the message to be published to an arbitrary Kafka topic instead of the configured one - redirecting it to a sensitive internal topic, or injecting attacker-crafted messages into a topic consumed by a critical downstream service. The related kafka.OVERRIDE_TIMESTAMP and kafka.PARTITION_KEY headers could likewise be injected to backdate messages or target specific partitions. No credentials are required when the bridging consumer is unauthenticated.\nThis issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\n\nUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set or read Kafka headers via the raw header names must use the CamelKafka* names (for example CamelKafkaOverrideTopic and CamelKafkaTopic) instead of the old kafka.* values. For deployments that cannot upgrade immediately, strip the kafka.* headers from any untrusted ingress before the kafka: producer (for example removeHeaders(\u0027kafka.*\u0027) at the start of the route), and set the target topic from a trusted source."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual description of severity"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-20",
"description": "CWE-20 Improper Input Validation",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-74",
"description": "CWE-74 Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T08:10:43.227Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-49098.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-Kafka: The kafka.OVERRIDE_TOPIC (and other kafka.*) Exchange header constants used non-Camel-prefixed names that bypass the upstream HTTP header filter, allowing an HTTP client to redirect Kafka messages to an arbitrary topic",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-49098",
"datePublished": "2026-07-06T08:10:43.227Z",
"dateReserved": "2026-05-27T11:44:53.864Z",
"dateUpdated": "2026-07-07T12:27:08.483Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-49097 (GCVE-0-2026-49097)
Vulnerability from cvelistv5
Published
2026-07-06 08:10
Modified
2026-07-06 19:02
Severity ?
VLAI Severity ?
EPSS score ?
CWE
Summary
Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel IRC component.
The camel-irc producer chooses the destination of an outgoing IRC message from the irc.sendTo Exchange header (the constant IrcConstants.IRC_SEND_TO, value irc.sendTo); when that header is present it overrides the channel list configured on the endpoint, and the message is sent only to the specified destination. This and the component's other control headers (irc.target, irc.messageType, irc.user.*, irc.num, irc.value) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into an irc: producer, any HTTP client could therefore set the irc.sendTo header and redirect a message that the route intended for a configured channel to an arbitrary IRC channel or user - exfiltrating the message content to an attacker-chosen nickname, leaking it into a public channel, or delivering messages that appear to come from the bot. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set IRC headers via the raw header names must use the CamelIrc* names (for example CamelIrcSendTo) instead of the old irc.* values. For deployments that cannot upgrade immediately, strip the irc.* headers from any untrusted ingress before the irc: producer (for example removeHeaders('irc.*') at the start of the route), and set the IRC destination from a trusted source.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.0.0 ≤ Version: 4.15.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2026-07-06T09:25:39.652Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/07/05/22"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "NONE",
"baseScore": 6.5,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "LOW",
"integrityImpact": "LOW",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-49097",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-06T19:02:00.670679Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T19:02:56.155Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-irc",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.14.8",
"status": "affected",
"version": "4.0.0",
"versionType": "semver"
},
{
"lessThan": "4.18.3",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThan": "4.21.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Yu Bao from PayPal"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Andrea Cosentino"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eImproper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027) vulnerability in Apache Camel IRC component.\u003c/p\u003eThe camel-irc producer chooses the destination of an outgoing IRC message from the irc.sendTo Exchange header (the constant IrcConstants.IRC_SEND_TO, value irc.sendTo); when that header is present it overrides the channel list configured on the endpoint, and the message is sent only to the specified destination. This and the component\u0027s other control headers (irc.target, irc.messageType, irc.user.*, irc.num, irc.value) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into an irc: producer, any HTTP client could therefore set the irc.sendTo header and redirect a message that the route intended for a configured channel to an arbitrary IRC channel or user - exfiltrating the message content to an attacker-chosen nickname, leaking it into a public channel, or delivering messages that appear to come from the bot. No credentials are required when the bridging consumer is unauthenticated.\u003cbr\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set IRC headers via the raw header names must use the CamelIrc* names (for example CamelIrcSendTo) instead of the old irc.* values. For deployments that cannot upgrade immediately, strip the irc.* headers from any untrusted ingress before the irc: producer (for example removeHeaders(\u0027irc.*\u0027) at the start of the route), and set the IRC destination from a trusted source.\u003c/p\u003e"
}
],
"value": "Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027) vulnerability in Apache Camel IRC component.\n\nThe camel-irc producer chooses the destination of an outgoing IRC message from the irc.sendTo Exchange header (the constant IrcConstants.IRC_SEND_TO, value irc.sendTo); when that header is present it overrides the channel list configured on the endpoint, and the message is sent only to the specified destination. This and the component\u0027s other control headers (irc.target, irc.messageType, irc.user.*, irc.num, irc.value) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into an irc: producer, any HTTP client could therefore set the irc.sendTo header and redirect a message that the route intended for a configured channel to an arbitrary IRC channel or user - exfiltrating the message content to an attacker-chosen nickname, leaking it into a public channel, or delivering messages that appear to come from the bot. No credentials are required when the bridging consumer is unauthenticated.\nThis issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\n\nUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set IRC headers via the raw header names must use the CamelIrc* names (for example CamelIrcSendTo) instead of the old irc.* values. For deployments that cannot upgrade immediately, strip the irc.* headers from any untrusted ingress before the irc: producer (for example removeHeaders(\u0027irc.*\u0027) at the start of the route), and set the IRC destination from a trusted source."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual description of severity"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-20",
"description": "CWE-20 Improper Input Validation",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-74",
"description": "CWE-74 Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T08:10:26.965Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-49097.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-IRC: The irc.sendTo (and other irc.*) Exchange header constants used non-Camel-prefixed names that bypass the HTTP header filter, allowing an HTTP client to redirect outgoing IRC messages to arbitrary channels or users",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-49097",
"datePublished": "2026-07-06T08:10:26.965Z",
"dateReserved": "2026-05-27T11:43:12.917Z",
"dateUpdated": "2026-07-06T19:02:56.155Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-48204 (GCVE-0-2026-48204)
Vulnerability from cvelistv5
Published
2026-07-06 08:06
Modified
2026-07-06 19:08
Severity ?
VLAI Severity ?
EPSS score ?
Summary
Improper Input Validation, Improper Access Control vulnerability in Apache Camel in Camel Mongodb Gridfs component.
The camel-mongodb-gridfs producer selects the GridFS operation to perform from the gridfs.operation Exchange header when the endpoint's operation parameter is not set - which is the default. The control-header constants (GridFsConstants.GRIDFS_OPERATION, GRIDFS_OBJECT_ID, GRIDFS_METADATA, GRIDFS_CHUNKSIZE, GRIDFS_FILE_ID_PRODUCED) were the plain strings gridfs.operation, gridfs.objectid, gridfs.metadata, gridfs.chunksize and gridfs.fileid. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a mongodb-gridfs: producer with no explicit operation, any HTTP client could therefore set the gridfs.operation header to override the route's intended operation - switching, for example, a file upload to remove (deleting a file identified by the attacker-supplied gridfs.objectid), listAll (enumerating every file in the bucket) or findOne (reading a file) - and supply a gridfs.metadata value that is parsed as a MongoDB document, enabling NoSQL operator injection. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive GridFS operations or metadata via the raw header names must use CamelGridFsOperation / CamelGridFsObjectId / CamelGridFsMetadata / CamelGridFsChunkSize / CamelGridFsFileId instead of the gridfs.* names. For deployments that cannot upgrade immediately, set an explicit operation on the mongodb-gridfs: endpoint so the operation is not taken from a header, and strip the gridfs.* headers from any untrusted ingress before the producer.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.0.0 ≤ Version: 4.15.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2026-07-06T09:25:29.547Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/07/05/18"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-48204",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-06T19:07:54.223976Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T19:08:16.754Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-mongodb-gridfs",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.14.8",
"status": "affected",
"version": "4.0.0",
"versionType": "semver"
},
{
"lessThan": "4.18.3",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThan": "4.21.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Yu Bao from PayPal"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Andrea Cosentino"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eImproper Input Validation, Improper Access Control vulnerability in Apache Camel in Camel Mongodb Gridfs component.\u003c/p\u003eThe camel-mongodb-gridfs producer selects the GridFS operation to perform from the gridfs.operation Exchange header when the endpoint\u0027s operation parameter is not set - which is the default. The control-header constants (GridFsConstants.GRIDFS_OPERATION, GRIDFS_OBJECT_ID, GRIDFS_METADATA, GRIDFS_CHUNKSIZE, GRIDFS_FILE_ID_PRODUCED) were the plain strings gridfs.operation, gridfs.objectid, gridfs.metadata, gridfs.chunksize and gridfs.fileid. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a mongodb-gridfs: producer with no explicit operation, any HTTP client could therefore set the gridfs.operation header to override the route\u0027s intended operation - switching, for example, a file upload to remove (deleting a file identified by the attacker-supplied gridfs.objectid), listAll (enumerating every file in the bucket) or findOne (reading a file) - and supply a gridfs.metadata value that is parsed as a MongoDB document, enabling NoSQL operator injection. No credentials are required when the bridging consumer is unauthenticated.\u003cbr\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive GridFS operations or metadata via the raw header names must use CamelGridFsOperation / CamelGridFsObjectId / CamelGridFsMetadata / CamelGridFsChunkSize / CamelGridFsFileId instead of the gridfs.* names. For deployments that cannot upgrade immediately, set an explicit operation on the mongodb-gridfs: endpoint so the operation is not taken from a header, and strip the gridfs.* headers from any untrusted ingress before the producer.\u003c/p\u003e"
}
],
"value": "Improper Input Validation, Improper Access Control vulnerability in Apache Camel in Camel Mongodb Gridfs component.\n\nThe camel-mongodb-gridfs producer selects the GridFS operation to perform from the gridfs.operation Exchange header when the endpoint\u0027s operation parameter is not set - which is the default. The control-header constants (GridFsConstants.GRIDFS_OPERATION, GRIDFS_OBJECT_ID, GRIDFS_METADATA, GRIDFS_CHUNKSIZE, GRIDFS_FILE_ID_PRODUCED) were the plain strings gridfs.operation, gridfs.objectid, gridfs.metadata, gridfs.chunksize and gridfs.fileid. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a mongodb-gridfs: producer with no explicit operation, any HTTP client could therefore set the gridfs.operation header to override the route\u0027s intended operation - switching, for example, a file upload to remove (deleting a file identified by the attacker-supplied gridfs.objectid), listAll (enumerating every file in the bucket) or findOne (reading a file) - and supply a gridfs.metadata value that is parsed as a MongoDB document, enabling NoSQL operator injection. No credentials are required when the bridging consumer is unauthenticated.\nThis issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\n\nUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive GridFS operations or metadata via the raw header names must use CamelGridFsOperation / CamelGridFsObjectId / CamelGridFsMetadata / CamelGridFsChunkSize / CamelGridFsFileId instead of the gridfs.* names. For deployments that cannot upgrade immediately, set an explicit operation on the mongodb-gridfs: endpoint so the operation is not taken from a header, and strip the gridfs.* headers from any untrusted ingress before the producer."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual description of severity"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-20",
"description": "CWE-20 Improper Input Validation",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-284",
"description": "CWE-284 Improper Access Control",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T08:06:52.913Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-48204.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-MongoDB-GridFS: The gridfs.* control headers used non-Camel-prefixed names that bypass the HTTP header filter, allowing an HTTP client to switch the GridFS operation - including destructive file deletion - in the default configuration",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-48204",
"datePublished": "2026-07-06T08:06:52.913Z",
"dateReserved": "2026-05-21T09:00:09.248Z",
"dateUpdated": "2026-07-06T19:08:16.754Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-48203 (GCVE-0-2026-48203)
Vulnerability from cvelistv5
Published
2026-07-06 08:06
Modified
2026-07-06 19:17
Severity ?
VLAI Severity ?
EPSS score ?
CWE
Summary
Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel Solr component.
The camel-solr producer copies Exchange message headers whose names begin with the SolrParam. prefix into the parameters of the Solr request, and headers whose names begin with the SolrField. prefix into the fields of the indexed Solr document. The prefix constants (SolrConstants.HEADER_PARAM_PREFIX / HEADER_FIELD_PREFIX) were the plain strings SolrParam. / SolrField.. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a solr: producer, any HTTP client could therefore set SolrParam.* headers to inject arbitrary Solr request parameters - including shards or stream.url, which cause the Solr server to issue server-side requests to an attacker-chosen URL (server-side request forgery, for example to an internal service or a cloud metadata endpoint), or qt to reach administrative request handlers - and set SolrField.* headers to inject arbitrary fields into indexed documents. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Solr parameters or fields via the raw header prefixes must use CamelSolrParam. / CamelSolrField. instead of SolrParam. / SolrField.. For deployments that cannot upgrade immediately, strip the SolrParam.* and SolrField.* headers from any untrusted ingress before the solr: producer, and set the required Solr parameters and fields from a trusted source in the route.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.0.0 ≤ Version: 4.15.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2026-07-06T09:25:27.765Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/07/05/17"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "NONE",
"baseScore": 9.1,
"baseSeverity": "CRITICAL",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-48203",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-06T19:17:14.778965Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T19:17:53.635Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-solr",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.14.8",
"status": "affected",
"version": "4.0.0",
"versionType": "semver"
},
{
"lessThan": "4.18.3",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThan": "4.21.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Yu Bao from Paypal"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Andrea Cosentino"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eImproper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027), Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel Solr component.\u003c/p\u003eThe camel-solr producer copies Exchange message headers whose names begin with the SolrParam. prefix into the parameters of the Solr request, and headers whose names begin with the SolrField. prefix into the fields of the indexed Solr document. The prefix constants (SolrConstants.HEADER_PARAM_PREFIX / HEADER_FIELD_PREFIX) were the plain strings SolrParam. / SolrField.. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a solr: producer, any HTTP client could therefore set SolrParam.* headers to inject arbitrary Solr request parameters - including shards or stream.url, which cause the Solr server to issue server-side requests to an attacker-chosen URL (server-side request forgery, for example to an internal service or a cloud metadata endpoint), or qt to reach administrative request handlers - and set SolrField.* headers to inject arbitrary fields into indexed documents. No credentials are required when the bridging consumer is unauthenticated.\u003cbr\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Solr parameters or fields via the raw header prefixes must use CamelSolrParam. / CamelSolrField. instead of SolrParam. / SolrField.. For deployments that cannot upgrade immediately, strip the SolrParam.* and SolrField.* headers from any untrusted ingress before the solr: producer, and set the required Solr parameters and fields from a trusted source in the route.\u003c/p\u003e"
}
],
"value": "Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027), Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel Solr component.\n\nThe camel-solr producer copies Exchange message headers whose names begin with the SolrParam. prefix into the parameters of the Solr request, and headers whose names begin with the SolrField. prefix into the fields of the indexed Solr document. The prefix constants (SolrConstants.HEADER_PARAM_PREFIX / HEADER_FIELD_PREFIX) were the plain strings SolrParam. / SolrField.. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a solr: producer, any HTTP client could therefore set SolrParam.* headers to inject arbitrary Solr request parameters - including shards or stream.url, which cause the Solr server to issue server-side requests to an attacker-chosen URL (server-side request forgery, for example to an internal service or a cloud metadata endpoint), or qt to reach administrative request handlers - and set SolrField.* headers to inject arbitrary fields into indexed documents. No credentials are required when the bridging consumer is unauthenticated.\nThis issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\n\nUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Solr parameters or fields via the raw header prefixes must use CamelSolrParam. / CamelSolrField. instead of SolrParam. / SolrField.. For deployments that cannot upgrade immediately, strip the SolrParam.* and SolrField.* headers from any untrusted ingress before the solr: producer, and set the required Solr parameters and fields from a trusted source in the route."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual description of severity"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-74",
"description": "CWE-74 Improper Neutralization of Special Elements in Output Used by a Downstream Component (\u0027Injection\u0027)",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-20",
"description": "CWE-20 Improper Input Validation",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-918",
"description": "CWE-918 Server-Side Request Forgery (SSRF)",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T08:06:22.592Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "http://camel.apache.org/security/CVE-2026-48203.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-Solr: The SolrParam. and SolrField. Exchange header prefixes used non-Camel-prefixed names that bypass the HTTP header filter, allowing an HTTP client to inject Solr query parameters (server-side request forgery) and document fields",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-48203",
"datePublished": "2026-07-06T08:06:22.592Z",
"dateReserved": "2026-05-21T08:58:37.029Z",
"dateUpdated": "2026-07-06T19:17:53.635Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-46592 (GCVE-0-2026-46592)
Vulnerability from cvelistv5
Published
2026-07-06 08:04
Modified
2026-07-06 19:20
Severity ?
VLAI Severity ?
EPSS score ?
CWE
Summary
Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel CXF SOAP component.
The camel-cxf producer selects which SOAP operation to invoke on the backend service from the operationName (and operationNamespace) Exchange header, whose constant values (CxfConstants.OPERATION_NAME / OPERATION_NAMESPACE) were the plain strings operationName / operationNamespace. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a cxf: producer, any HTTP client could therefore set the operationName header and have CxfProducer resolve and invoke a different WSDL operation than the route intended - for example replacing a read operation with a destructive one - against the backend SOAP service (a confused-deputy redirection). The constant is defined in the shared camel-cxf-common module, so the same non-prefixed names also applied to camel-cxfrs. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the operation-selection headers are named CamelCxfOperationName / CamelCxfOperationNamespace and are filtered at transport boundaries; see the 4.21 upgrade guide for the cross-transport carrier-header pattern. For deployments that cannot upgrade immediately, do not select the CXF operation from untrusted input: strip the operationName and operationNamespace headers from any untrusted ingress before the cxf: producer and set the operation from a trusted source in the route.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.0.0 ≤ Version: 4.15.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2026-07-06T09:25:22.301Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/07/05/15"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "NONE",
"baseScore": 7.5,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-46592",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-06T19:19:37.827133Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T19:20:07.548Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-cxf-soap",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.14.8",
"status": "affected",
"version": "4.0.0",
"versionType": "semver"
},
{
"lessThan": "4.18.3",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThan": "4.21.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Yu Bao from Paypal"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Andrea Cosentino"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eImproper Input Validation, Unintended Proxy or Intermediary (\u0027Confused Deputy\u0027) vulnerability in Apache Camel CXF SOAP component.\u003c/p\u003eThe camel-cxf producer selects which SOAP operation to invoke on the backend service from the operationName (and operationNamespace) Exchange header, whose constant values (CxfConstants.OPERATION_NAME / OPERATION_NAMESPACE) were the plain strings operationName / operationNamespace. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a cxf: producer, any HTTP client could therefore set the operationName header and have CxfProducer resolve and invoke a different WSDL operation than the route intended - for example replacing a read operation with a destructive one - against the backend SOAP service (a confused-deputy redirection). The constant is defined in the shared camel-cxf-common module, so the same non-prefixed names also applied to camel-cxfrs. No credentials are required when the bridging consumer is unauthenticated.\u003cbr\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the operation-selection headers are named CamelCxfOperationName / CamelCxfOperationNamespace and are filtered at transport boundaries; see the 4.21 upgrade guide for the cross-transport carrier-header pattern. For deployments that cannot upgrade immediately, do not select the CXF operation from untrusted input: strip the operationName and operationNamespace headers from any untrusted ingress before the cxf: producer and set the operation from a trusted source in the route.\u003cbr\u003e\u003c/p\u003e"
}
],
"value": "Improper Input Validation, Unintended Proxy or Intermediary (\u0027Confused Deputy\u0027) vulnerability in Apache Camel CXF SOAP component.\n\nThe camel-cxf producer selects which SOAP operation to invoke on the backend service from the operationName (and operationNamespace) Exchange header, whose constant values (CxfConstants.OPERATION_NAME / OPERATION_NAMESPACE) were the plain strings operationName / operationNamespace. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a cxf: producer, any HTTP client could therefore set the operationName header and have CxfProducer resolve and invoke a different WSDL operation than the route intended - for example replacing a read operation with a destructive one - against the backend SOAP service (a confused-deputy redirection). The constant is defined in the shared camel-cxf-common module, so the same non-prefixed names also applied to camel-cxfrs. No credentials are required when the bridging consumer is unauthenticated.\nThis issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\n\nUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the operation-selection headers are named CamelCxfOperationName / CamelCxfOperationNamespace and are filtered at transport boundaries; see the 4.21 upgrade guide for the cross-transport carrier-header pattern. For deployments that cannot upgrade immediately, do not select the CXF operation from untrusted input: strip the operationName and operationNamespace headers from any untrusted ingress before the cxf: producer and set the operation from a trusted source in the route."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual description of severity"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-20",
"description": "CWE-20 Improper Input Validation",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-441",
"description": "CWE-441 Unintended Proxy or Intermediary (\u0027Confused Deputy\u0027)",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T08:04:32.968Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-46592.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-CXF: The SOAP operation-selection headers used non-Camel-prefixed names (operationName, operationNamespace) that bypass the HTTP header filter, allowing an HTTP client to redirect the invoked SOAP operation",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-46592",
"datePublished": "2026-07-06T08:04:32.968Z",
"dateReserved": "2026-05-15T13:32:13.841Z",
"dateUpdated": "2026-07-06T19:20:07.548Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-46591 (GCVE-0-2026-46591)
Vulnerability from cvelistv5
Published
2026-07-06 08:04
Modified
2026-07-06 19:21
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-943 - Improper Neutralization of Special Elements in Data Query Logic
Summary
Improper Neutralization of Special Elements in Data Query Logic vulnerability in Apache Camel Neo4J component.
The camel-neo4j producer builds the Cypher WHERE clause for its match/retrieve and delete operations from the CamelNeo4jMatchProperties map. CVE-2025-66169 addressed Cypher injection through the property values by binding them as query parameters ($paramN), but the property names (the JSON keys of that map) were still concatenated into the query string verbatim in Neo4jProducer.retrieveNodes() and deleteNode(). A property name containing Cypher syntax therefore alters the structure of the executed query. Where a route maps untrusted input into the CamelNeo4jMatchProperties map - for example by passing a request body as the match map, or from a consumer that does not filter inbound Camel* headers - an attacker who controls the JSON key names can inject arbitrary Cypher and read, modify or delete any node or relationship in the Neo4j database. The CamelNeo4jMatchProperties header is itself Camel-prefixed and is filtered by the HTTP header-filter strategy, so a plain HTTP client cannot set it directly; the issue is reachable through routes that deliberately or inadvertently carry untrusted data into that header.
This issue affects Apache Camel: from 4.10.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, do not populate the CamelNeo4jMatchProperties map from untrusted input: validate or allow-list the property names (for example against ^[A-Za-z_][A-Za-z0-9_]*$) before the Neo4j producer, and ensure that any consumer feeding such a route filters inbound Camel* / camel* headers so the match header cannot be supplied by an external sender.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.10.0 ≤ Version: 4.15.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "NONE",
"baseScore": 8.2,
"baseSeverity": "HIGH",
"confidentialityImpact": "LOW",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:H/A:N",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-46591",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-06T19:20:49.095923Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T19:21:17.467Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-neo4j",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.14.8",
"status": "affected",
"version": "4.10.0",
"versionType": "semver"
},
{
"lessThan": "4.18.3",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThan": "4.21.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Yu Bao from Paypal"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Andrea Cosentino"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eImproper Neutralization of Special Elements in Data Query Logic vulnerability in Apache Camel Neo4J component.\u003c/p\u003eThe camel-neo4j producer builds the Cypher WHERE clause for its match/retrieve and delete operations from the CamelNeo4jMatchProperties map. CVE-2025-66169 addressed Cypher injection through the property values by binding them as query parameters ($paramN), but the property names (the JSON keys of that map) were still concatenated into the query string verbatim in Neo4jProducer.retrieveNodes() and deleteNode(). A property name containing Cypher syntax therefore alters the structure of the executed query. Where a route maps untrusted input into the CamelNeo4jMatchProperties map - for example by passing a request body as the match map, or from a consumer that does not filter inbound Camel* headers - an attacker who controls the JSON key names can inject arbitrary Cypher and read, modify or delete any node or relationship in the Neo4j database. The CamelNeo4jMatchProperties header is itself Camel-prefixed and is filtered by the HTTP header-filter strategy, so a plain HTTP client cannot set it directly; the issue is reachable through routes that deliberately or inadvertently carry untrusted data into that header.\u003cbr\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.10.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, do not populate the CamelNeo4jMatchProperties map from untrusted input: validate or allow-list the property names (for example against ^[A-Za-z_][A-Za-z0-9_]*$) before the Neo4j producer, and ensure that any consumer feeding such a route filters inbound Camel* / camel* headers so the match header cannot be supplied by an external sender.\u003c/p\u003e"
}
],
"value": "Improper Neutralization of Special Elements in Data Query Logic vulnerability in Apache Camel Neo4J component.\n\nThe camel-neo4j producer builds the Cypher WHERE clause for its match/retrieve and delete operations from the CamelNeo4jMatchProperties map. CVE-2025-66169 addressed Cypher injection through the property values by binding them as query parameters ($paramN), but the property names (the JSON keys of that map) were still concatenated into the query string verbatim in Neo4jProducer.retrieveNodes() and deleteNode(). A property name containing Cypher syntax therefore alters the structure of the executed query. Where a route maps untrusted input into the CamelNeo4jMatchProperties map - for example by passing a request body as the match map, or from a consumer that does not filter inbound Camel* headers - an attacker who controls the JSON key names can inject arbitrary Cypher and read, modify or delete any node or relationship in the Neo4j database. The CamelNeo4jMatchProperties header is itself Camel-prefixed and is filtered by the HTTP header-filter strategy, so a plain HTTP client cannot set it directly; the issue is reachable through routes that deliberately or inadvertently carry untrusted data into that header.\nThis issue affects Apache Camel: from 4.10.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\n\nUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, do not populate the CamelNeo4jMatchProperties map from untrusted input: validate or allow-list the property names (for example against ^[A-Za-z_][A-Za-z0-9_]*$) before the Neo4j producer, and ensure that any consumer feeding such a route filters inbound Camel* / camel* headers so the match header cannot be supplied by an external sender."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual description of severity"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-943",
"description": "CWE-943 Improper Neutralization of Special Elements in Data Query Logic",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T08:04:17.286Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-46591.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-Neo4j: JSON property names from the CamelNeo4jMatchProperties header are interpolated into the Cypher WHERE clause without validation, allowing Cypher injection (incomplete remediation of CVE-2025-66169)",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-46591",
"datePublished": "2026-07-06T08:04:17.286Z",
"dateReserved": "2026-05-15T13:27:34.353Z",
"dateUpdated": "2026-07-06T19:21:17.467Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-46590 (GCVE-0-2026-46590)
Vulnerability from cvelistv5
Published
2026-07-06 08:03
Modified
2026-07-06 19:16
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-502 - Deserialization of Untrusted Data
Summary
Deserialization of Untrusted Data vulnerability in Apache Camel PQC component.
The camel-pqc component persists post-quantum key metadata (KeyMetadata) through pluggable KeyLifecycleManager implementations. HashicorpVaultKeyLifecycleManager and AwsSecretsManagerKeyLifecycleManager read that metadata back from the configured secret backend by deserializing a Base64-wrapped value with a raw java.io.ObjectInputStream.readObject() and no ObjectInputFilter or class allow-list; the cast to KeyMetadata happens only after readObject() returns, so any readObject() side effects in a crafted object run before the type check. The same unfiltered legacy-migration read also remained in FileBasedKeyLifecycleManager (for the stored KeyPair and KeyMetadata). A principal who can write to the operator-controlled backend that holds these values - the HashiCorp Vault KV path, or the AWS Secrets Manager secret (requiring a Vault token or secretsmanager:PutSecretValue) - could store a crafted serialized object that is deserialized during normal key-lifecycle operations, potentially leading to code execution in the context of the application that manages the keys. This is an incomplete-remediation follow-on to CVE-2026-40048 (CAMEL-23200), which changed FileBasedKeyLifecycleManager to store metadata as JSON / PKCS#8 / X.509 but did not add an ObjectInputFilter, did not cover the Vault and AWS sibling managers, and left FileBasedKeyLifecycleManager's own legacy-migration deserialization unfiltered.
This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, restrict write access to the key backend so that only the application's own identity can write the camel-pqc secrets (least-privilege HashiCorp Vault policies and secretsmanager:PutSecretValue IAM), and keep the PQC key material in a backend separate from any data that less-trusted principals can write.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.18.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 8.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-46590",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-06T19:15:54.431681Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T19:16:21.233Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-pqc",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.18.3",
"status": "affected",
"version": "4.18.0",
"versionType": "semver"
},
{
"lessThan": "4.21.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Yu Bao from Paypal"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Andrea Cosentino"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eDeserialization of Untrusted Data vulnerability in Apache Camel PQC component.\u003c/p\u003eThe camel-pqc component persists post-quantum key metadata (KeyMetadata) through pluggable KeyLifecycleManager implementations. HashicorpVaultKeyLifecycleManager and AwsSecretsManagerKeyLifecycleManager read that metadata back from the configured secret backend by deserializing a Base64-wrapped value with a raw java.io.ObjectInputStream.readObject() and no ObjectInputFilter or class allow-list; the cast to KeyMetadata happens only after readObject() returns, so any readObject() side effects in a crafted object run before the type check. The same unfiltered legacy-migration read also remained in FileBasedKeyLifecycleManager (for the stored KeyPair and KeyMetadata). A principal who can write to the operator-controlled backend that holds these values - the HashiCorp Vault KV path, or the AWS Secrets Manager secret (requiring a Vault token or secretsmanager:PutSecretValue) - could store a crafted serialized object that is deserialized during normal key-lifecycle operations, potentially leading to code execution in the context of the application that manages the keys. This is an incomplete-remediation follow-on to CVE-2026-40048 (CAMEL-23200), which changed FileBasedKeyLifecycleManager to store metadata as JSON / PKCS#8 / X.509 but did not add an ObjectInputFilter, did not cover the Vault and AWS sibling managers, and left FileBasedKeyLifecycleManager\u0027s own legacy-migration deserialization unfiltered.\u003cbr\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, restrict write access to the key backend so that only the application\u0027s own identity can write the camel-pqc secrets (least-privilege HashiCorp Vault policies and secretsmanager:PutSecretValue IAM), and keep the PQC key material in a backend separate from any data that less-trusted principals can write.\u003c/p\u003e"
}
],
"value": "Deserialization of Untrusted Data vulnerability in Apache Camel PQC component.\n\nThe camel-pqc component persists post-quantum key metadata (KeyMetadata) through pluggable KeyLifecycleManager implementations. HashicorpVaultKeyLifecycleManager and AwsSecretsManagerKeyLifecycleManager read that metadata back from the configured secret backend by deserializing a Base64-wrapped value with a raw java.io.ObjectInputStream.readObject() and no ObjectInputFilter or class allow-list; the cast to KeyMetadata happens only after readObject() returns, so any readObject() side effects in a crafted object run before the type check. The same unfiltered legacy-migration read also remained in FileBasedKeyLifecycleManager (for the stored KeyPair and KeyMetadata). A principal who can write to the operator-controlled backend that holds these values - the HashiCorp Vault KV path, or the AWS Secrets Manager secret (requiring a Vault token or secretsmanager:PutSecretValue) - could store a crafted serialized object that is deserialized during normal key-lifecycle operations, potentially leading to code execution in the context of the application that manages the keys. This is an incomplete-remediation follow-on to CVE-2026-40048 (CAMEL-23200), which changed FileBasedKeyLifecycleManager to store metadata as JSON / PKCS#8 / X.509 but did not add an ObjectInputFilter, did not cover the Vault and AWS sibling managers, and left FileBasedKeyLifecycleManager\u0027s own legacy-migration deserialization unfiltered.\nThis issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0.\n\nUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, restrict write access to the key backend so that only the application\u0027s own identity can write the camel-pqc secrets (least-privilege HashiCorp Vault policies and secretsmanager:PutSecretValue IAM), and keep the PQC key material in a backend separate from any data that less-trusted principals can write."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual description of severity"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-502",
"description": "CWE-502 Deserialization of Untrusted Data",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T08:03:54.979Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-46590.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-PQC: The HashiCorp Vault and AWS Secrets Manager key-lifecycle managers deserialize persisted key metadata with java.io.ObjectInputStream and no ObjectInputFilter (incomplete remediation of CVE-2026-40048)",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-46590",
"datePublished": "2026-07-06T08:03:54.979Z",
"dateReserved": "2026-05-15T13:23:22.009Z",
"dateUpdated": "2026-07-06T19:16:21.233Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-46457 (GCVE-0-2026-46457)
Vulnerability from cvelistv5
Published
2026-07-06 07:57
Modified
2026-07-06 19:27
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-20 - Improper Input Validation
Summary
Improper Input Validation vulnerability in Apache Camel NATS component.
The camel-nats component maps inbound NATS message headers into the Camel Exchange but defaulted its headerFilterStrategy to a bare new DefaultHeaderFilterStrategy() with no inbound rules configured (NatsConfiguration). With no inFilter, inFilterPattern or inFilterStartsWith set, DefaultHeaderFilterStrategy.applyFilterToExternalHeaders returns not filtered for every header name, so NatsConsumer copies every NATS message header - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - unmodified onto the Camel message. A client able to publish to the consumed NATS subject can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. NATS message headers require NATS 2.2 or later, and the issue is reachable without credentials when the NATS server is configured without authentication (the NATS server default).
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes camel-nats default to a dedicated NatsHeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound NATS messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and enable authentication on the NATS server so that only trusted clients can publish to the consumed subject.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.0.0 ≤ Version: 4.15.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2026-07-06T09:25:16.929Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/07/05/10"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "NONE",
"baseScore": 7.5,
"baseSeverity": "HIGH",
"confidentialityImpact": "NONE",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-46457",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-06T19:26:49.615569Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T19:27:26.948Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-nats",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.14.8",
"status": "affected",
"version": "4.0.0",
"versionType": "semver"
},
{
"lessThan": "4.18.3",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThan": "4.21.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Yu Bao from PayPal"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eImproper Input Validation vulnerability in Apache Camel NATS component.\u003c/p\u003eThe camel-nats component maps inbound NATS message headers into the Camel Exchange but defaulted its headerFilterStrategy to a bare new DefaultHeaderFilterStrategy() with no inbound rules configured (NatsConfiguration). With no inFilter, inFilterPattern or inFilterStartsWith set, DefaultHeaderFilterStrategy.applyFilterToExternalHeaders returns not filtered for every header name, so NatsConsumer copies every NATS message header - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - unmodified onto the Camel message. A client able to publish to the consumed NATS subject can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. NATS message headers require NATS 2.2 or later, and the issue is reachable without credentials when the NATS server is configured without authentication (the NATS server default).\u003cbr\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes camel-nats default to a dedicated NatsHeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound NATS messages before they reach any downstream producer (for example removeHeaders(\u0027Camel*\u0027) and removeHeaders(\u0027camel*\u0027) at the start of the route), and enable authentication on the NATS server so that only trusted clients can publish to the consumed subject.\u003c/p\u003e"
}
],
"value": "Improper Input Validation vulnerability in Apache Camel NATS component.\n\nThe camel-nats component maps inbound NATS message headers into the Camel Exchange but defaulted its headerFilterStrategy to a bare new DefaultHeaderFilterStrategy() with no inbound rules configured (NatsConfiguration). With no inFilter, inFilterPattern or inFilterStartsWith set, DefaultHeaderFilterStrategy.applyFilterToExternalHeaders returns not filtered for every header name, so NatsConsumer copies every NATS message header - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - unmodified onto the Camel message. A client able to publish to the consumed NATS subject can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. NATS message headers require NATS 2.2 or later, and the issue is reachable without credentials when the NATS server is configured without authentication (the NATS server default).\nThis issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\n\nUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes camel-nats default to a dedicated NatsHeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound NATS messages before they reach any downstream producer (for example removeHeaders(\u0027Camel*\u0027) and removeHeaders(\u0027camel*\u0027) at the start of the route), and enable authentication on the NATS server so that only trusted clients can publish to the consumed subject."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual description of severity"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-20",
"description": "CWE-20 Improper Input Validation",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T07:57:13.104Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-46457.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-NATS: Inbound NATS message headers are mapped into the Exchange without a configured HeaderFilterStrategy, allowing a client that can publish to the subject to inject Camel control headers",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-46457",
"datePublished": "2026-07-06T07:57:13.104Z",
"dateReserved": "2026-05-14T11:45:46.558Z",
"dateUpdated": "2026-07-06T19:27:26.948Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-46456 (GCVE-0-2026-46456)
Vulnerability from cvelistv5
Published
2026-07-06 07:56
Modified
2026-07-06 19:28
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-20 - Improper Input Validation
Summary
Improper Input Validation vulnerability in Apache Camel AWS2-SQS Component.
The camel-aws2-sqs component map inbound message attributes into the Camel Exchange through a component-specific HeaderFilterStrategy. Sqs2HeaderFilterStrategy configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and org.apache.camel.* headers being written to the broker) but did not configure an inbound filter. As a result, when Sqs2Consumer copies each SQS MessageAttribute into the Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, DefaultHeaderFilterStrategy applied no inbound rule and treated every header name as not filtered - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - copying them unmodified onto the Camel message. Any principal able to send messages to the consumed SQS queue (for example a cross-account sender or a lower-privileged in-account component holding sqs:SendMessage) could therefore set arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix adds an inbound HeaderFilterStrategy rule to Sqs2HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so sender-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and restrict who may send to the consumed SQS queue by applying least-privilege sqs:SendMessage permissions on the queue resource policy.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.0.0 ≤ Version: 4.15.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2026-07-06T09:25:15.150Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/07/05/9"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-46456",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-06T19:28:14.313666Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T19:28:37.870Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-aws2-sqs",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.14.8",
"status": "affected",
"version": "4.0.0",
"versionType": "semver"
},
{
"lessThan": "4.18.3",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThan": "4.21.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Yu Bao from Paypal"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eImproper Input Validation vulnerability in Apache Camel AWS2-SQS Component.\u003cbr\u003e\u003c/p\u003e\u003cp\u003eThe camel-aws2-sqs component map inbound message attributes into the Camel Exchange through a component-specific HeaderFilterStrategy. Sqs2HeaderFilterStrategy configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and org.apache.camel.* headers being written to the broker) but did not configure an inbound filter. As a result, when Sqs2Consumer copies each SQS MessageAttribute into the Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, DefaultHeaderFilterStrategy applied no inbound rule and treated every header name as not filtered - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - copying them unmodified onto the Camel message. Any principal able to send messages to the consumed SQS queue (for example a cross-account sender or a lower-privileged in-account component holding sqs:SendMessage) could therefore set arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses.\u003cbr\u003e\u003c/p\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix adds an inbound HeaderFilterStrategy rule to Sqs2HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so sender-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound messages before they reach any downstream producer (for example removeHeaders(\u0027Camel*\u0027) and removeHeaders(\u0027camel*\u0027) at the start of the route), and restrict who may send to the consumed SQS queue by applying least-privilege sqs:SendMessage permissions on the queue resource policy.\u003c/p\u003e"
}
],
"value": "Improper Input Validation vulnerability in Apache Camel AWS2-SQS Component.\n\n\nThe camel-aws2-sqs component map inbound message attributes into the Camel Exchange through a component-specific HeaderFilterStrategy. Sqs2HeaderFilterStrategy configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and org.apache.camel.* headers being written to the broker) but did not configure an inbound filter. As a result, when Sqs2Consumer copies each SQS MessageAttribute into the Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, DefaultHeaderFilterStrategy applied no inbound rule and treated every header name as not filtered - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - copying them unmodified onto the Camel message. Any principal able to send messages to the consumed SQS queue (for example a cross-account sender or a lower-privileged in-account component holding sqs:SendMessage) could therefore set arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses.\n\n\nThis issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\n\nUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix adds an inbound HeaderFilterStrategy rule to Sqs2HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so sender-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound messages before they reach any downstream producer (for example removeHeaders(\u0027Camel*\u0027) and removeHeaders(\u0027camel*\u0027) at the start of the route), and restrict who may send to the consumed SQS queue by applying least-privilege sqs:SendMessage permissions on the queue resource policy."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual description of severity"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-20",
"description": "CWE-20 Improper Input Validation",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T07:56:51.598Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-46456.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-AWS2-SQS: Inbound message attributes are mapped into the Exchange without an inbound HeaderFilterStrategy, allowing a message sender to inject Camel control headers",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-46456",
"datePublished": "2026-07-06T07:56:51.598Z",
"dateReserved": "2026-05-14T08:59:11.779Z",
"dateUpdated": "2026-07-06T19:28:37.870Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-46455 (GCVE-0-2026-46455)
Vulnerability from cvelistv5
Published
2026-07-06 07:56
Modified
2026-07-06 19:29
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-613 - Insufficient Session Expiration
Summary
Insufficient Session Expiration vulnerability in Apache Camel Keycloak Component.
The camel-keycloak security helper KeycloakSecurityHelper.parseAndVerifyAccessToken builds a Keycloak TokenVerifier using withChecks(...) with only the subject-exists check and the realm-URL (issuer) check. Keycloak's TokenVerifier.withChecks(...) appends to an initially empty check list - the upstream default checks are installed only when withDefaultChecks() is called - so the built-in IS_ACTIVE predicate, which validates the token's exp (expiration) and nbf (not-before) claims, is never applied. As a result the helper verifies the token signature, subject and issuer but does not enforce the token's validity window: an access token that is expired, or not yet valid, is accepted as valid. Routes that rely on this helper to authenticate inbound requests therefore accept access tokens that are outside their intended lifetime.
This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes KeycloakSecurityHelper.parseAndVerifyAccessToken include the TokenVerifier.IS_ACTIVE check so that expired or not-yet-valid access tokens are rejected, aligning the helper with Keycloak's default check set. For deployments that cannot upgrade immediately, enforce token expiration outside the helper - for example validate the access token's exp/nbf claims in the route before trusting it, keep Keycloak access-token lifetimes short, and ensure any upstream gateway or resource server also validates the token validity window.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.18.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2026-07-06T09:25:13.360Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/07/05/8"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-46455",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-06T19:29:09.924590Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T19:29:29.570Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-keycloak",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.18.3",
"status": "affected",
"version": "4.18.0",
"versionType": "semver"
},
{
"lessThan": "4.21.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Yu Bao from Paypal"
},
{
"lang": "en",
"type": "finder",
"value": "Andrea Cosentino from Apache Software Foundation"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eInsufficient Session Expiration vulnerability in Apache Camel Keycloak Component.\u003c/p\u003eThe camel-keycloak security helper KeycloakSecurityHelper.parseAndVerifyAccessToken builds a Keycloak TokenVerifier using withChecks(...) with only the subject-exists check and the realm-URL (issuer) check. Keycloak\u0027s TokenVerifier.withChecks(...) appends to an initially empty check list - the upstream default checks are installed only when withDefaultChecks() is called - so the built-in IS_ACTIVE predicate, which validates the token\u0027s exp (expiration) and nbf (not-before) claims, is never applied. As a result the helper verifies the token signature, subject and issuer but does not enforce the token\u0027s validity window: an access token that is expired, or not yet valid, is accepted as valid. Routes that rely on this helper to authenticate inbound requests therefore accept access tokens that are outside their intended lifetime.\u003cbr\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes KeycloakSecurityHelper.parseAndVerifyAccessToken include the TokenVerifier.IS_ACTIVE check so that expired or not-yet-valid access tokens are rejected, aligning the helper with Keycloak\u0027s default check set. For deployments that cannot upgrade immediately, enforce token expiration outside the helper - for example validate the access token\u0027s exp/nbf claims in the route before trusting it, keep Keycloak access-token lifetimes short, and ensure any upstream gateway or resource server also validates the token validity window.\u003c/p\u003e"
}
],
"value": "Insufficient Session Expiration vulnerability in Apache Camel Keycloak Component.\n\nThe camel-keycloak security helper KeycloakSecurityHelper.parseAndVerifyAccessToken builds a Keycloak TokenVerifier using withChecks(...) with only the subject-exists check and the realm-URL (issuer) check. Keycloak\u0027s TokenVerifier.withChecks(...) appends to an initially empty check list - the upstream default checks are installed only when withDefaultChecks() is called - so the built-in IS_ACTIVE predicate, which validates the token\u0027s exp (expiration) and nbf (not-before) claims, is never applied. As a result the helper verifies the token signature, subject and issuer but does not enforce the token\u0027s validity window: an access token that is expired, or not yet valid, is accepted as valid. Routes that rely on this helper to authenticate inbound requests therefore accept access tokens that are outside their intended lifetime.\nThis issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0.\n\nUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes KeycloakSecurityHelper.parseAndVerifyAccessToken include the TokenVerifier.IS_ACTIVE check so that expired or not-yet-valid access tokens are rejected, aligning the helper with Keycloak\u0027s default check set. For deployments that cannot upgrade immediately, enforce token expiration outside the helper - for example validate the access token\u0027s exp/nbf claims in the route before trusting it, keep Keycloak access-token lifetimes short, and ensure any upstream gateway or resource server also validates the token validity window."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual description of severity"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-613",
"description": "CWE-613 Insufficient Session Expiration",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T07:56:29.905Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-46455.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-Keycloak: The access-token validity window is not verified because the IS_ACTIVE check is missing from the TokenVerifier, allowing expired tokens to be accepted",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-46455",
"datePublished": "2026-07-06T07:56:29.905Z",
"dateReserved": "2026-05-14T08:55:41.867Z",
"dateUpdated": "2026-07-06T19:29:29.570Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-46454 (GCVE-0-2026-46454)
Vulnerability from cvelistv5
Published
2026-07-06 07:56
Modified
2026-07-06 17:41
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-20 - Improper Input Validation
Summary
Improper Input Validation vulnerability in Apache Camel Cometd Component.
The camel-cometd component maps inbound Bayeux (CometD) message headers into the Camel Exchange without applying a HeaderFilterStrategy. CometdBinding.populateExchangeFromMessage copies the entire ext.CamelHeaders map supplied by the CometD client directly onto the Camel message (message.setHeaders), so any header name - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelJmsDestinationName - is accepted unmodified. Because a CometdComponent installs no Bayeux SecurityPolicy by default, any client that can complete the Bayeux handshake against the CometD endpoint can publish such a message without authentication. An attacker can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a JMS destination); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix implements a HeaderFilterStrategy in the camel-cometd binding (a long-standing TODO in the code) that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound CometD messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and install an explicit Bayeux SecurityPolicy on the CometdComponent so that only authenticated clients can publish.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.0.0 ≤ Version: 4.15.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2026-07-06T09:25:11.555Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/07/05/7"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-46454",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-06T17:41:16.224857Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T17:41:19.974Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-cometd",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.14.8",
"status": "affected",
"version": "4.0.0",
"versionType": "semver"
},
{
"lessThan": "4.18.3",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThan": "4.21.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Yu Bao from Paypal"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eImproper Input Validation vulnerability in Apache Camel Cometd Component.\u003c/p\u003eThe camel-cometd component maps inbound Bayeux (CometD) message headers into the Camel Exchange without applying a HeaderFilterStrategy. CometdBinding.populateExchangeFromMessage copies the entire ext.CamelHeaders map supplied by the CometD client directly onto the Camel message (message.setHeaders), so any header name - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelJmsDestinationName - is accepted unmodified. Because a CometdComponent installs no Bayeux SecurityPolicy by default, any client that can complete the Bayeux handshake against the CometD endpoint can publish such a message without authentication. An attacker can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a JMS destination); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses.\u003cbr\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix implements a HeaderFilterStrategy in the camel-cometd binding (a long-standing TODO in the code) that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound CometD messages before they reach any downstream producer (for example removeHeaders(\u0027Camel*\u0027) and removeHeaders(\u0027camel*\u0027) at the start of the route), and install an explicit Bayeux SecurityPolicy on the CometdComponent so that only authenticated clients can publish.\u003c/p\u003e"
}
],
"value": "Improper Input Validation vulnerability in Apache Camel Cometd Component.\n\nThe camel-cometd component maps inbound Bayeux (CometD) message headers into the Camel Exchange without applying a HeaderFilterStrategy. CometdBinding.populateExchangeFromMessage copies the entire ext.CamelHeaders map supplied by the CometD client directly onto the Camel message (message.setHeaders), so any header name - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelJmsDestinationName - is accepted unmodified. Because a CometdComponent installs no Bayeux SecurityPolicy by default, any client that can complete the Bayeux handshake against the CometD endpoint can publish such a message without authentication. An attacker can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a JMS destination); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses.\nThis issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\n\nUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix implements a HeaderFilterStrategy in the camel-cometd binding (a long-standing TODO in the code) that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound CometD messages before they reach any downstream producer (for example removeHeaders(\u0027Camel*\u0027) and removeHeaders(\u0027camel*\u0027) at the start of the route), and install an explicit Bayeux SecurityPolicy on the CometdComponent so that only authenticated clients can publish."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual description of severity"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-20",
"description": "CWE-20 Improper Input Validation",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T07:56:14.036Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-46454.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-Cometd: Inbound Bayeux message headers are mapped into the Exchange without a HeaderFilterStrategy, allowing unauthenticated clients to inject Camel control headers",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-46454",
"datePublished": "2026-07-06T07:56:14.036Z",
"dateReserved": "2026-05-14T08:45:22.737Z",
"dateUpdated": "2026-07-06T17:41:19.974Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-46453 (GCVE-0-2026-46453)
Vulnerability from cvelistv5
Published
2026-07-06 07:55
Modified
2026-07-06 18:44
Severity ?
VLAI Severity ?
EPSS score ?
Summary
Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel ElasticSearch Rest Client.
The camel-elasticsearch-rest-client component reads several Exchange headers to control its behaviour - SEARCH_QUERY (an advanced query body), OPERATION (which Elasticsearch operation to run), INDEX_NAME, INDEX_SETTINGS and ID. The string values of these header constants, defined in ElasticSearchRestClientConstant, are plain unprefixed names ('SEARCH_QUERY', 'OPERATION', 'INDEX_NAME', 'INDEX_SETTINGS', 'ID') rather than the 'Camel'-prefixed names used by every other Camel component (for example CamelSqlQuery, CamelMongoDbCriteria, CamelCqlQuery). Camel's inbound HTTP header filter, HttpHeaderFilterStrategy, blocks only header names that begin with 'Camel' or 'camel'. Because the Elasticsearch header names do not carry that prefix, they pass through the inbound filter unchanged. When a Camel route exposes an HTTP entry point (for example platform-http) in front of an elasticsearch-rest-client producer, an untrusted HTTP client can set these headers directly on its request and override the query and operation that the route author configured: reading every document in the index (SEARCH_QUERY with a match_all query), deleting documents (OPERATION set to Delete together with ID), or exfiltrating selected fields. No credentials are required and the producer reads the headers unconditionally.
This issue affects Apache Camel: from 4.3.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix renames the camel-elasticsearch-rest-client Exchange header constant string values (ID, SEARCH_QUERY, INDEX_SETTINGS, INDEX_NAME, OPERATION) to carry the Camel prefix (CamelElasticsearchId, CamelElasticsearchSearchQuery, CamelElasticsearchIndexSettings, CamelElasticsearchIndexName, CamelElasticsearchOperation) so that they are blocked by the inbound HttpHeaderFilterStrategy; the Java field names are unchanged. For deployments that cannot upgrade immediately, strip the affected headers from untrusted inbound messages before they reach the producer (for example removeHeader('SEARCH_QUERY'), removeHeader('OPERATION'), removeHeader('INDEX_NAME'), removeHeader('INDEX_SETTINGS') and removeHeader('ID') in front of the elasticsearch-rest-client endpoint), or apply a custom HeaderFilterStrategy that blocks these names.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.3.0 ≤ Version: 4.15.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2026-07-06T09:25:09.735Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/07/05/6"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "NONE",
"baseScore": 5.3,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "LOW",
"integrityImpact": "NONE",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-46453",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-06T18:44:05.942781Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T18:44:44.793Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-elasticsearch-rest-client",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.14.8",
"status": "affected",
"version": "4.3.0",
"versionType": "semver"
},
{
"lessThan": "4.18.3",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThan": "4.21.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Yu Bao from Paypal"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eImproper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel ElasticSearch Rest Client.\u003c/p\u003eThe camel-elasticsearch-rest-client component reads several Exchange headers to control its behaviour - SEARCH_QUERY (an advanced query body), OPERATION (which Elasticsearch operation to run), INDEX_NAME, INDEX_SETTINGS and ID. The string values of these header constants, defined in ElasticSearchRestClientConstant, are plain unprefixed names (\u0027SEARCH_QUERY\u0027, \u0027OPERATION\u0027, \u0027INDEX_NAME\u0027, \u0027INDEX_SETTINGS\u0027, \u0027ID\u0027) rather than the \u0027Camel\u0027-prefixed names used by every other Camel component (for example CamelSqlQuery, CamelMongoDbCriteria, CamelCqlQuery). Camel\u0027s inbound HTTP header filter, HttpHeaderFilterStrategy, blocks only header names that begin with \u0027Camel\u0027 or \u0027camel\u0027. Because the Elasticsearch header names do not carry that prefix, they pass through the inbound filter unchanged. When a Camel route exposes an HTTP entry point (for example platform-http) in front of an elasticsearch-rest-client producer, an untrusted HTTP client can set these headers directly on its request and override the query and operation that the route author configured: reading every document in the index (SEARCH_QUERY with a match_all query), deleting documents (OPERATION set to Delete together with ID), or exfiltrating selected fields. No credentials are required and the producer reads the headers unconditionally.\u003cbr\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.3.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix renames the camel-elasticsearch-rest-client Exchange header constant string values (ID, SEARCH_QUERY, INDEX_SETTINGS, INDEX_NAME, OPERATION) to carry the Camel prefix (CamelElasticsearchId, CamelElasticsearchSearchQuery, CamelElasticsearchIndexSettings, CamelElasticsearchIndexName, CamelElasticsearchOperation) so that they are blocked by the inbound HttpHeaderFilterStrategy; the Java field names are unchanged. For deployments that cannot upgrade immediately, strip the affected headers from untrusted inbound messages before they reach the producer (for example removeHeader(\u0027SEARCH_QUERY\u0027), removeHeader(\u0027OPERATION\u0027), removeHeader(\u0027INDEX_NAME\u0027), removeHeader(\u0027INDEX_SETTINGS\u0027) and removeHeader(\u0027ID\u0027) in front of the elasticsearch-rest-client endpoint), or apply a custom HeaderFilterStrategy that blocks these names.\u003c/p\u003e"
}
],
"value": "Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel ElasticSearch Rest Client.\n\nThe camel-elasticsearch-rest-client component reads several Exchange headers to control its behaviour - SEARCH_QUERY (an advanced query body), OPERATION (which Elasticsearch operation to run), INDEX_NAME, INDEX_SETTINGS and ID. The string values of these header constants, defined in ElasticSearchRestClientConstant, are plain unprefixed names (\u0027SEARCH_QUERY\u0027, \u0027OPERATION\u0027, \u0027INDEX_NAME\u0027, \u0027INDEX_SETTINGS\u0027, \u0027ID\u0027) rather than the \u0027Camel\u0027-prefixed names used by every other Camel component (for example CamelSqlQuery, CamelMongoDbCriteria, CamelCqlQuery). Camel\u0027s inbound HTTP header filter, HttpHeaderFilterStrategy, blocks only header names that begin with \u0027Camel\u0027 or \u0027camel\u0027. Because the Elasticsearch header names do not carry that prefix, they pass through the inbound filter unchanged. When a Camel route exposes an HTTP entry point (for example platform-http) in front of an elasticsearch-rest-client producer, an untrusted HTTP client can set these headers directly on its request and override the query and operation that the route author configured: reading every document in the index (SEARCH_QUERY with a match_all query), deleting documents (OPERATION set to Delete together with ID), or exfiltrating selected fields. No credentials are required and the producer reads the headers unconditionally.\nThis issue affects Apache Camel: from 4.3.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\n\nUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix renames the camel-elasticsearch-rest-client Exchange header constant string values (ID, SEARCH_QUERY, INDEX_SETTINGS, INDEX_NAME, OPERATION) to carry the Camel prefix (CamelElasticsearchId, CamelElasticsearchSearchQuery, CamelElasticsearchIndexSettings, CamelElasticsearchIndexName, CamelElasticsearchOperation) so that they are blocked by the inbound HttpHeaderFilterStrategy; the Java field names are unchanged. For deployments that cannot upgrade immediately, strip the affected headers from untrusted inbound messages before they reach the producer (for example removeHeader(\u0027SEARCH_QUERY\u0027), removeHeader(\u0027OPERATION\u0027), removeHeader(\u0027INDEX_NAME\u0027), removeHeader(\u0027INDEX_SETTINGS\u0027) and removeHeader(\u0027ID\u0027) in front of the elasticsearch-rest-client endpoint), or apply a custom HeaderFilterStrategy that blocks these names."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual description of severity"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-20",
"description": "CWE-20 Improper Input Validation",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-639",
"description": "CWE-639 Authorization Bypass Through User-Controlled Key",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T07:55:56.230Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-46453.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-Elasticsearch-Rest-Client: Exchange header constants without the Camel prefix bypass inbound HTTP header filtering, allowing untrusted clients to override the Elasticsearch query and operation",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-46453",
"datePublished": "2026-07-06T07:55:56.230Z",
"dateReserved": "2026-05-14T08:17:55.698Z",
"dateUpdated": "2026-07-06T18:44:44.793Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-43865 (GCVE-0-2026-43865)
Vulnerability from cvelistv5
Published
2026-07-06 07:55
Modified
2026-07-06 18:46
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-502 - Deserialization of Untrusted Data
Summary
Deserialization of Untrusted Data vulnerability in Apache Camel Hazelcast component.
The camel-hazelcast component creates and manages Hazelcast instances using a default configuration that applies no Java deserialization filter. When Camel builds the Hazelcast Config itself - that is, when no user-supplied HazelcastInstance, hazelcastConfigUri, or referenced Config bean is provided - neither Hazelcast's JavaSerializationFilterConfig nor a Camel-side ObjectInputFilter is configured, so objects received over the Hazelcast cluster protocol are deserialized inside Hazelcast's own serialization layer (ObjectInputStream.readObject) before Camel ever processes them. An attacker who can join or otherwise reach the Hazelcast cluster can publish a crafted serialized Java object that is then deserialized on every Camel node, resulting in remote code execution. The exposure is present by default and requires no opt-in endpoint configuration: any route using a hazelcast consumer (hazelcast-topic, hazelcast-queue, hazelcast-seda, hazelcast-map, hazelcast-multimap, hazelcast-replicatedmap, hazelcast-list, hazelcast-set), as well as the HazelcastAggregationRepository and HazelcastIdempotentRepository, is affected whenever the managed instance is created from Camel's default configuration.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes Camel apply a default Hazelcast JavaSerializationFilterConfig (whitelisting the java., javax. and org.apache.camel. class-name prefixes and blacklisting java.net.) to instances it creates from its own default configuration, while leaving any user-supplied Config or HazelcastInstance untouched. For deployments that cannot upgrade immediately, configure a deserialization filter on the Hazelcast instance (Hazelcast JavaSerializationFilterConfig, or the JVM-wide system property -Djdk.serialFilter=!java.net.**;java.**;javax.**;org.apache.camel.**;!*) and enable Hazelcast cluster authentication and TLS to restrict who can reach the cluster.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.0.0 ≤ Version: 4.15.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2026-07-06T09:25:06.035Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/07/05/5"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "HIGH",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 8.1,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-43865",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-06T18:45:45.952604Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T18:46:19.640Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-hazelcast",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.14.8",
"status": "affected",
"version": "4.0.0",
"versionType": "semver"
},
{
"lessThan": "4.18.3",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThan": "4.21.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "gaorenyusi"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eDeserialization of Untrusted Data vulnerability in Apache Camel Hazelcast component.\u003c/p\u003eThe camel-hazelcast component creates and manages Hazelcast instances using a default configuration that applies no Java deserialization filter. When Camel builds the Hazelcast Config itself - that is, when no user-supplied HazelcastInstance, hazelcastConfigUri, or referenced Config bean is provided - neither Hazelcast\u0027s JavaSerializationFilterConfig nor a Camel-side ObjectInputFilter is configured, so objects received over the Hazelcast cluster protocol are deserialized inside Hazelcast\u0027s own serialization layer (ObjectInputStream.readObject) before Camel ever processes them. An attacker who can join or otherwise reach the Hazelcast cluster can publish a crafted serialized Java object that is then deserialized on every Camel node, resulting in remote code execution. The exposure is present by default and requires no opt-in endpoint configuration: any route using a hazelcast consumer (hazelcast-topic, hazelcast-queue, hazelcast-seda, hazelcast-map, hazelcast-multimap, hazelcast-replicatedmap, hazelcast-list, hazelcast-set), as well as the HazelcastAggregationRepository and HazelcastIdempotentRepository, is affected whenever the managed instance is created from Camel\u0027s default configuration.\u003cbr\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes Camel apply a default Hazelcast JavaSerializationFilterConfig (whitelisting the java., javax. and org.apache.camel. class-name prefixes and blacklisting java.net.) to instances it creates from its own default configuration, while leaving any user-supplied Config or HazelcastInstance untouched. For deployments that cannot upgrade immediately, configure a deserialization filter on the Hazelcast instance (Hazelcast JavaSerializationFilterConfig, or the JVM-wide system property -Djdk.serialFilter=!java.net.**;java.**;javax.**;org.apache.camel.**;!*) and enable Hazelcast cluster authentication and TLS to restrict who can reach the cluster.\u003c/p\u003e"
}
],
"value": "Deserialization of Untrusted Data vulnerability in Apache Camel Hazelcast component.\n\nThe camel-hazelcast component creates and manages Hazelcast instances using a default configuration that applies no Java deserialization filter. When Camel builds the Hazelcast Config itself - that is, when no user-supplied HazelcastInstance, hazelcastConfigUri, or referenced Config bean is provided - neither Hazelcast\u0027s JavaSerializationFilterConfig nor a Camel-side ObjectInputFilter is configured, so objects received over the Hazelcast cluster protocol are deserialized inside Hazelcast\u0027s own serialization layer (ObjectInputStream.readObject) before Camel ever processes them. An attacker who can join or otherwise reach the Hazelcast cluster can publish a crafted serialized Java object that is then deserialized on every Camel node, resulting in remote code execution. The exposure is present by default and requires no opt-in endpoint configuration: any route using a hazelcast consumer (hazelcast-topic, hazelcast-queue, hazelcast-seda, hazelcast-map, hazelcast-multimap, hazelcast-replicatedmap, hazelcast-list, hazelcast-set), as well as the HazelcastAggregationRepository and HazelcastIdempotentRepository, is affected whenever the managed instance is created from Camel\u0027s default configuration.\nThis issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\n\nUsers are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes Camel apply a default Hazelcast JavaSerializationFilterConfig (whitelisting the java., javax. and org.apache.camel. class-name prefixes and blacklisting java.net.) to instances it creates from its own default configuration, while leaving any user-supplied Config or HazelcastInstance untouched. For deployments that cannot upgrade immediately, configure a deserialization filter on the Hazelcast instance (Hazelcast JavaSerializationFilterConfig, or the JVM-wide system property -Djdk.serialFilter=!java.net.**;java.**;javax.**;org.apache.camel.**;!*) and enable Hazelcast cluster authentication and TLS to restrict who can reach the cluster."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual description of severity"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-502",
"description": "CWE-502 Deserialization of Untrusted Data",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T07:55:26.650Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-43865.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-Hazelcast: Unsafe Java deserialization in default-configured managed Hazelcast instances enables remote code execution",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-43865",
"datePublished": "2026-07-06T07:55:26.650Z",
"dateReserved": "2026-05-04T11:38:52.245Z",
"dateUpdated": "2026-07-06T18:46:19.640Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-42527 (GCVE-0-2026-42527)
Vulnerability from cvelistv5
Published
2026-07-06 07:55
Modified
2026-07-06 18:47
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-502 - Deserialization of Untrusted Data
Summary
Deserialization of Untrusted Data vulnerability in Apache Camel.
The default ObjectInputFilter pattern shipped with several Apache Camel components for defense-in-depth deserialization filtering ('java.**;javax.**;org.apache.camel.**;!*', or the no-'javax.**' variant in the aggregation-repository components) uses a recursive 'java.**' glob that admits classes whose hashCode/equals/readObject methods perform network I/O, notably java.net.URL and java.net.InetAddress. When an attacker can deliver a Java-serialized payload to an affected Camel consumer, deserialization of a HashMap (or any collection that calls hashCode on its elements) containing java.net.URL keys causes the JVM to issue DNS queries to the attacker-supplied host during the deserialization side-effect. The class-level filter check passes because the resulting object's class (HashMap) is allow-listed; the DNS query is observable on an attacker-controlled DNS server, providing an out-of-band side channel. The exposure is highest on the camel-jms family because JmsBinding.extractBodyFromJms invokes ObjectMessage.getObject() unconditionally when mapJmsMessage=true (default). Affected components: camel-jms, camel-sjms, camel-amqp, camel-mina, camel-netty, camel-netty-http, camel-vertx-http, camel-infinispan, and the aggregation repository components camel-leveldb, camel-cassandraql, camel-consul, camel-sql (JDBC aggregation repository).
This issue affects Apache Camel: from 4.14.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to a version that contains the CAMEL-23372 fix once available: 4.21.0 for the 4.21.x line, 4.18.3 for the 4.18.x line, and 4.14.8 for the 4.14.x line. For deployments that cannot upgrade immediately, configure a JMS-provider-side allow-list (Apache ActiveMQ Artemis 'deserializationAllowList' / 'deserializationDenyList', Apache ActiveMQ Classic 'org.apache.activemq.SERIALIZABLE_PACKAGES') as the primary mitigation, and/or override the in-code default via the endpoint-level 'deserializationFilter' option or the JVM-wide '-Djdk.serialFilter' system property with an explicit deny: '!java.net.**;java.**;javax.**;org.apache.camel.**;!*' (or '!java.net.**;java.**;org.apache.camel.**;!*' for the aggregation-repository components, which do not include javax.**).
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.14.0 ≤ Version: 4.15.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2026-07-06T09:25:03.913Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/07/05/4"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "HIGH",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 8.1,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-42527",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-06T18:47:03.658679Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T18:47:30.650Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.14.8",
"status": "affected",
"version": "4.14.0",
"versionType": "semver"
},
{
"lessThan": "4.18.3",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThan": "4.21.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Venkatraman Kumar from Securin"
},
{
"lang": "en",
"type": "finder",
"value": "Yu Bao from Paypal"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eDeserialization of Untrusted Data vulnerability in Apache Camel.\u003c/p\u003eThe default ObjectInputFilter pattern shipped with several Apache Camel components for defense-in-depth deserialization filtering (\u0027java.**;javax.**;org.apache.camel.**;!*\u0027, or the no-\u0027javax.**\u0027 variant in the aggregation-repository components) uses a recursive \u0027java.**\u0027 glob that admits classes whose hashCode/equals/readObject methods perform network I/O, notably java.net.URL and java.net.InetAddress. When an attacker can deliver a Java-serialized payload to an affected Camel consumer, deserialization of a HashMap (or any collection that calls hashCode on its elements) containing java.net.URL keys causes the JVM to issue DNS queries to the attacker-supplied host during the deserialization side-effect. The class-level filter check passes because the resulting object\u0027s class (HashMap) is allow-listed; the DNS query is observable on an attacker-controlled DNS server, providing an out-of-band side channel. The exposure is highest on the camel-jms family because JmsBinding.extractBodyFromJms invokes ObjectMessage.getObject() unconditionally when mapJmsMessage=true (default). Affected components: camel-jms, camel-sjms, camel-amqp, camel-mina, camel-netty, camel-netty-http, camel-vertx-http, camel-infinispan, and the aggregation repository components camel-leveldb, camel-cassandraql, camel-consul, camel-sql (JDBC aggregation repository).\u003cbr\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.14.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to a version that contains the CAMEL-23372 fix once available: 4.21.0 for the 4.21.x line, 4.18.3 for the 4.18.x line, and 4.14.8 for the 4.14.x line. For deployments that cannot upgrade immediately, configure a JMS-provider-side allow-list (Apache ActiveMQ Artemis \u0027deserializationAllowList\u0027 / \u0027deserializationDenyList\u0027, Apache ActiveMQ Classic \u0027org.apache.activemq.SERIALIZABLE_PACKAGES\u0027) as the primary mitigation, and/or override the in-code default via the endpoint-level \u0027deserializationFilter\u0027 option or the JVM-wide \u0027-Djdk.serialFilter\u0027 system property with an explicit deny: \u0027!java.net.**;java.**;javax.**;org.apache.camel.**;!*\u0027 (or \u0027!java.net.**;java.**;org.apache.camel.**;!*\u0027 for the aggregation-repository components, which do not include javax.**).\u003c/p\u003e"
}
],
"value": "Deserialization of Untrusted Data vulnerability in Apache Camel.\n\nThe default ObjectInputFilter pattern shipped with several Apache Camel components for defense-in-depth deserialization filtering (\u0027java.**;javax.**;org.apache.camel.**;!*\u0027, or the no-\u0027javax.**\u0027 variant in the aggregation-repository components) uses a recursive \u0027java.**\u0027 glob that admits classes whose hashCode/equals/readObject methods perform network I/O, notably java.net.URL and java.net.InetAddress. When an attacker can deliver a Java-serialized payload to an affected Camel consumer, deserialization of a HashMap (or any collection that calls hashCode on its elements) containing java.net.URL keys causes the JVM to issue DNS queries to the attacker-supplied host during the deserialization side-effect. The class-level filter check passes because the resulting object\u0027s class (HashMap) is allow-listed; the DNS query is observable on an attacker-controlled DNS server, providing an out-of-band side channel. The exposure is highest on the camel-jms family because JmsBinding.extractBodyFromJms invokes ObjectMessage.getObject() unconditionally when mapJmsMessage=true (default). Affected components: camel-jms, camel-sjms, camel-amqp, camel-mina, camel-netty, camel-netty-http, camel-vertx-http, camel-infinispan, and the aggregation repository components camel-leveldb, camel-cassandraql, camel-consul, camel-sql (JDBC aggregation repository).\nThis issue affects Apache Camel: from 4.14.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.\n\nUsers are recommended to upgrade to a version that contains the CAMEL-23372 fix once available: 4.21.0 for the 4.21.x line, 4.18.3 for the 4.18.x line, and 4.14.8 for the 4.14.x line. For deployments that cannot upgrade immediately, configure a JMS-provider-side allow-list (Apache ActiveMQ Artemis \u0027deserializationAllowList\u0027 / \u0027deserializationDenyList\u0027, Apache ActiveMQ Classic \u0027org.apache.activemq.SERIALIZABLE_PACKAGES\u0027) as the primary mitigation, and/or override the in-code default via the endpoint-level \u0027deserializationFilter\u0027 option or the JVM-wide \u0027-Djdk.serialFilter\u0027 system property with an explicit deny: \u0027!java.net.**;java.**;javax.**;org.apache.camel.**;!*\u0027 (or \u0027!java.net.**;java.**;org.apache.camel.**;!*\u0027 for the aggregation-repository components, which do not include javax.**)."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual description of severity"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-502",
"description": "CWE-502 Deserialization of Untrusted Data",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T07:55:06.159Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-42527.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Permissive default ObjectInputFilter pattern admits java.net.** and enables DNS-based information disclosure",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-42527",
"datePublished": "2026-07-06T07:55:06.159Z",
"dateReserved": "2026-04-28T11:50:34.288Z",
"dateUpdated": "2026-07-06T18:47:30.650Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-40859 (GCVE-0-2026-40859)
Vulnerability from cvelistv5
Published
2026-07-06 07:54
Modified
2026-07-06 18:48
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-502 - Deserialization of Untrusted Data
Summary
Deserialization of Untrusted Data vulnerability in Apache Camel.
The camel-vertx-http component deserializes HTTP response bodies carrying the Content-Type application/x-java-serialized-object using a raw java.io.ObjectInputStream, without applying any ObjectInputFilter (VertxHttpHelper.deserializeJavaObjectFromStream) This deserialization path is reached only when the producer endpoint is configured with transferException=true (or the component-level allowJavaSerializedObject=true) and throwExceptionOnFailure is left at its default value of true; in that case a backend HTTP response with a 5xx status and the application/x-java-serialized-object content type has its body deserialized with no class restrictions. An attacker who controls the backend the Camel producer talks to - through a man-in-the-middle position on an unencrypted (plain HTTP) connection, or by compromising the backend service - can return a crafted serialized Java object and, if a suitable gadget chain is present on the classpath, achieve remote code execution on the Camel application host. The path is not reachable in the default configuration, where transferException is false.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.20.0.
Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the deserialization performed by both helper utilities is constrained by a default ObjectInputFilter (allow-list java.**;javax.**;org.apache.camel.**;!*), which can be customised through the new deserializationFilter endpoint option or the JVM-wide -Djdk.serialFilter system property. For deployments that cannot upgrade immediately: do not enable transferException=true (or allowJavaSerializedObject=true) on producers that talk to untrusted or network-reachable backends; ensure producer connections use TLS (https) so that a response cannot be substituted by a man-in-the-middle; and, where the option is required, set an explicit -Djdk.serialFilter allow-list (for example java.**;org.apache.camel.**;!*) to constrain deserialization.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.0.0 ≤ Version: 4.15.0 ≤ Version: 4.19.0 ≤ |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2026-07-06T09:25:02.059Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/07/05/3"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "HIGH",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 8.1,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-40859",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-06T18:47:48.609198Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T18:48:16.623Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-vertx-http",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.14.8",
"status": "affected",
"version": "4.0.0",
"versionType": "semver"
},
{
"lessThan": "4.18.3",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
},
{
"lessThan": "4.20.0",
"status": "affected",
"version": "4.19.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Venkatraman Kumar from Securin"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eDeserialization of Untrusted Data vulnerability in Apache Camel.\u003c/p\u003eThe camel-vertx-http component deserializes HTTP response bodies carrying the Content-Type application/x-java-serialized-object using a raw java.io.ObjectInputStream, without applying any ObjectInputFilter (VertxHttpHelper.deserializeJavaObjectFromStream) This deserialization path is reached only when the producer endpoint is configured with transferException=true (or the component-level allowJavaSerializedObject=true) and throwExceptionOnFailure is left at its default value of true; in that case a backend HTTP response with a 5xx status and the application/x-java-serialized-object content type has its body deserialized with no class restrictions. An attacker who controls the backend the Camel producer talks to - through a man-in-the-middle position on an unencrypted (plain HTTP) connection, or by compromising the backend service - can return a crafted serialized Java object and, if a suitable gadget chain is present on the classpath, achieve remote code execution on the Camel application host. The path is not reachable in the default configuration, where transferException is false.\u003cbr\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.20.0.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the deserialization performed by both helper utilities is constrained by a default ObjectInputFilter (allow-list java.**;javax.**;org.apache.camel.**;!*), which can be customised through the new deserializationFilter endpoint option or the JVM-wide -Djdk.serialFilter system property. For deployments that cannot upgrade immediately: do not enable transferException=true (or allowJavaSerializedObject=true) on producers that talk to untrusted or network-reachable backends; ensure producer connections use TLS (https) so that a response cannot be substituted by a man-in-the-middle; and, where the option is required, set an explicit -Djdk.serialFilter allow-list (for example java.**;org.apache.camel.**;!*) to constrain deserialization.\u003c/p\u003e"
}
],
"value": "Deserialization of Untrusted Data vulnerability in Apache Camel.\n\nThe camel-vertx-http component deserializes HTTP response bodies carrying the Content-Type application/x-java-serialized-object using a raw java.io.ObjectInputStream, without applying any ObjectInputFilter (VertxHttpHelper.deserializeJavaObjectFromStream) This deserialization path is reached only when the producer endpoint is configured with transferException=true (or the component-level allowJavaSerializedObject=true) and throwExceptionOnFailure is left at its default value of true; in that case a backend HTTP response with a 5xx status and the application/x-java-serialized-object content type has its body deserialized with no class restrictions. An attacker who controls the backend the Camel producer talks to - through a man-in-the-middle position on an unencrypted (plain HTTP) connection, or by compromising the backend service - can return a crafted serialized Java object and, if a suitable gadget chain is present on the classpath, achieve remote code execution on the Camel application host. The path is not reachable in the default configuration, where transferException is false.\nThis issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.20.0.\n\nUsers are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the deserialization performed by both helper utilities is constrained by a default ObjectInputFilter (allow-list java.**;javax.**;org.apache.camel.**;!*), which can be customised through the new deserializationFilter endpoint option or the JVM-wide -Djdk.serialFilter system property. For deployments that cannot upgrade immediately: do not enable transferException=true (or allowJavaSerializedObject=true) on producers that talk to untrusted or network-reachable backends; ensure producer connections use TLS (https) so that a response cannot be substituted by a man-in-the-middle; and, where the option is required, set an explicit -Djdk.serialFilter allow-list (for example java.**;org.apache.camel.**;!*) to constrain deserialization."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual description of severity"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-502",
"description": "CWE-502 Deserialization of Untrusted Data",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T07:54:29.981Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-40859.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-Vertx-Http: Unsafe Java deserialization of HTTP response bodies via a raw ObjectInputStream when transferException is enabled",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-40859",
"datePublished": "2026-07-06T07:54:29.981Z",
"dateReserved": "2026-04-15T12:20:24.037Z",
"dateUpdated": "2026-07-06T18:48:16.623Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-40047 (GCVE-0-2026-40047)
Vulnerability from cvelistv5
Published
2026-07-06 07:46
Modified
2026-07-06 18:49
Severity ?
VLAI Severity ?
EPSS score ?
CWE
- CWE-88 - Improper Neutralization of Argument Delimiters in a Command ('Argument Injection')
Summary
Improper Neutralization of Argument Delimiters in a Command ('Argument Injection') vulnerability in Apache Camel Docling component.
The camel-docling component invokes the external `docling` command-line tool by assembling an argument list in DoclingProducer and executing it through java.lang.ProcessBuilder. Custom CLI arguments supplied through the `CamelDoclingCustomArguments` exchange header (a List<String>) were appended to that argument list with insufficient validation: the original implementation relied on a denylist of disallowed flags and only rejected path values that contained a literal `../` sequence. As a result, a Camel route that forwards externally-influenced data into the `CamelDoclingCustomArguments` header (or into the path-bearing headers used to build the invocation) could cause the producer to pass unrecognized or unintended `docling` CLI flags to the subprocess, and could supply path-like argument values that resolved outside the intended directory through traversal sequences not caught by the literal `../` check. Because Camel itself builds the `docling` invocation from these values, the component is responsible for constraining them, and the weak validation allowed CLI-argument injection and directory traversal in the arguments passed to the external tool. The invocation uses the list-based form of ProcessBuilder, so a shell does not interpret the argument values; OS command injection through shell metacharacters was not possible, and the metacharacter rejection added by the fix is defense-in-depth.
This issue affects Apache Camel: from 4.15.0 before 4.18.3.
Users are recommended to upgrade to a release that contains the CAMEL-23212 fix. On the mainline the fix is included from Apache Camel 4.19.0 (and later releases such as 4.20.0). For users on the 4.18.x LTS releases stream, upgrade to 4.18.3. The fix replaces the denylist with a strict allowlist of recognized `docling` CLI flags (rejecting any unrecognized flag, and rejecting producer-managed flags such as the output-directory flags), defensively rejects shell metacharacters in argument values, and normalizes path-like values with Path.normalize() before validating them so that traversal sequences which bypass a literal `../` check are detected. As defence in depth, route authors should avoid mapping untrusted message content into the `CamelDoclingCustomArguments` header and the path-bearing headers, and should strip Camel-internal headers from messages that arrive from untrusted producers.
References
| URL | Tags | ||||
|---|---|---|---|---|---|
|
|||||
Impacted products
| Vendor | Product | Version | ||
|---|---|---|---|---|
| Apache Software Foundation | Apache Camel |
Version: 4.15.0 ≤ |
{
"containers": {
"adp": [
{
"providerMetadata": {
"dateUpdated": "2026-07-06T09:25:00.160Z",
"orgId": "af854a3a-2127-422b-91ae-364da2661108",
"shortName": "CVE"
},
"references": [
{
"url": "http://www.openwall.com/lists/oss-security/2026/07/05/2"
}
],
"title": "CVE Program Container"
},
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "NONE",
"baseScore": 9.1,
"baseSeverity": "CRITICAL",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-40047",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-07-06T18:48:56.576065Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T18:49:25.326Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://repo.maven.apache.org/maven2",
"defaultStatus": "unaffected",
"packageName": "org.apache.camel:camel-docling",
"product": "Apache Camel",
"vendor": "Apache Software Foundation",
"versions": [
{
"lessThan": "4.18.3",
"status": "affected",
"version": "4.15.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Andrea Cosentino from Apache Software Foundation"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Andrea Cosentino from Apache Software Foundation"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eImproper Neutralization of Argument Delimiters in a Command (\u0027Argument Injection\u0027) vulnerability in Apache Camel Docling component.\u003c/p\u003eThe camel-docling component invokes the external `docling` command-line tool by assembling an argument list in DoclingProducer and executing it through java.lang.ProcessBuilder. Custom CLI arguments supplied through the `CamelDoclingCustomArguments` exchange header (a List\u0026lt;String\u0026gt;) were appended to that argument list with insufficient validation: the original implementation relied on a denylist of disallowed flags and only rejected path values that contained a literal `../` sequence. As a result, a Camel route that forwards externally-influenced data into the `CamelDoclingCustomArguments` header (or into the path-bearing headers used to build the invocation) could cause the producer to pass unrecognized or unintended `docling` CLI flags to the subprocess, and could supply path-like argument values that resolved outside the intended directory through traversal sequences not caught by the literal `../` check. Because Camel itself builds the `docling` invocation from these values, the component is responsible for constraining them, and the weak validation allowed CLI-argument injection and directory traversal in the arguments passed to the external tool. The invocation uses the list-based form of ProcessBuilder, so a shell does not interpret the argument values; OS command injection through shell metacharacters was not possible, and the metacharacter rejection added by the fix is defense-in-depth.\u003cbr\u003e\u003cp\u003eThis issue affects Apache Camel: from 4.15.0 before 4.18.3.\u003c/p\u003e\u003cp\u003eUsers are recommended to upgrade to a release that contains the CAMEL-23212 fix. On the mainline the fix is included from Apache Camel 4.19.0 (and later releases such as 4.20.0). For users on the 4.18.x LTS releases stream, upgrade to 4.18.3. The fix replaces the denylist with a strict allowlist of recognized `docling` CLI flags (rejecting any unrecognized flag, and rejecting producer-managed flags such as the output-directory flags), defensively rejects shell metacharacters in argument values, and normalizes path-like values with Path.normalize() before validating them so that traversal sequences which bypass a literal `../` check are detected. As defence in depth, route authors should avoid mapping untrusted message content into the `CamelDoclingCustomArguments` header and the path-bearing headers, and should strip Camel-internal headers from messages that arrive from untrusted producers.\u003c/p\u003e"
}
],
"value": "Improper Neutralization of Argument Delimiters in a Command (\u0027Argument Injection\u0027) vulnerability in Apache Camel Docling component.\n\nThe camel-docling component invokes the external `docling` command-line tool by assembling an argument list in DoclingProducer and executing it through java.lang.ProcessBuilder. Custom CLI arguments supplied through the `CamelDoclingCustomArguments` exchange header (a List\u003cString\u003e) were appended to that argument list with insufficient validation: the original implementation relied on a denylist of disallowed flags and only rejected path values that contained a literal `../` sequence. As a result, a Camel route that forwards externally-influenced data into the `CamelDoclingCustomArguments` header (or into the path-bearing headers used to build the invocation) could cause the producer to pass unrecognized or unintended `docling` CLI flags to the subprocess, and could supply path-like argument values that resolved outside the intended directory through traversal sequences not caught by the literal `../` check. Because Camel itself builds the `docling` invocation from these values, the component is responsible for constraining them, and the weak validation allowed CLI-argument injection and directory traversal in the arguments passed to the external tool. The invocation uses the list-based form of ProcessBuilder, so a shell does not interpret the argument values; OS command injection through shell metacharacters was not possible, and the metacharacter rejection added by the fix is defense-in-depth.\nThis issue affects Apache Camel: from 4.15.0 before 4.18.3.\n\nUsers are recommended to upgrade to a release that contains the CAMEL-23212 fix. On the mainline the fix is included from Apache Camel 4.19.0 (and later releases such as 4.20.0). For users on the 4.18.x LTS releases stream, upgrade to 4.18.3. The fix replaces the denylist with a strict allowlist of recognized `docling` CLI flags (rejecting any unrecognized flag, and rejecting producer-managed flags such as the output-directory flags), defensively rejects shell metacharacters in argument values, and normalizes path-like values with Path.normalize() before validating them so that traversal sequences which bypass a literal `../` check are detected. As defence in depth, route authors should avoid mapping untrusted message content into the `CamelDoclingCustomArguments` header and the path-bearing headers, and should strip Camel-internal headers from messages that arrive from untrusted producers."
}
],
"metrics": [
{
"other": {
"content": {
"text": "moderate"
},
"type": "Textual description of severity"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-88",
"description": "CWE-88 Improper Neutralization of Argument Delimiters in a Command (\u0027Argument Injection\u0027)",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-07-06T07:46:57.694Z",
"orgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"shortName": "apache"
},
"references": [
{
"tags": [
"vendor-advisory"
],
"url": "https://camel.apache.org/security/CVE-2026-40047.html"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Apache Camel: Camel-Docling: Insufficient validation of custom CLI arguments enables argument injection and path traversal in DoclingProducer",
"x_generator": {
"engine": "Vulnogram 0.2.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "f0158376-9dc2-43b6-827c-5f631a4d8d09",
"assignerShortName": "apache",
"cveId": "CVE-2026-40047",
"datePublished": "2026-07-06T07:46:57.694Z",
"dateReserved": "2026-04-08T16:19:46.829Z",
"dateUpdated": "2026-07-06T18:49:25.326Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}